Re: [udig-users] jgrass and georectify

[Jesse Eichar <jeichar@xxxxxxxxxxxxxxx>]

I'm going to put out RC14 in the next little while and will update the  
update-site then.  But until then you will need a developer to export  
a jar for you.  I'm really busy so I can't do it today but if I find a  
little spare time I will try.

Jesse
Le 28-Jan-08 à 2:28 AM, Fabio D'Ovidio a écrit :

> Jan Jezek ha scritto:
> > Hi all,
> >
> > Firstly sorry for silence from my side - I didn't catch this list  
> > and than I was few days with bad connection in Bulgaria...
> >
> > In community update site there is compiled version of plugin  
> > supporting
> > just vector layers and 4 transformation methods.  This plugin
> > is in svn repo under
> > http://svn.geotools.org/udig/community/jan/net.refractions.udig.transformtool.1.1
> > and should work with RC12 AFAIK.
>
> Have I compile it? So, I need uDIG SDK?
> Are there jars?
>
>
> Thanks
>
> > I've tried it with RC13 but the tool to specify vectors is broken  
> > there, but if you setup vectors yourself = make a layer that  
> > contains LineStrings where each feature consists just form two  
> > points, then the rest of plugin should work.
> >
> > On other hand in svn repo there is new development version in  
> > directory
> >
> > http://svn.geotools.org/udig/community/jan/net.refractions.udig.transformtool/ 
> >  .
> > This one brings raster support as well as few new functions but is  
> > developed against uDig-trunk that hasn't been released yet .
> >
> > During next week I can try to make the changes to get the old  
> > plugin (1.1)
> > working with RC13 and RC14 properly. New plugin with new feature  
> > will probably wait for uDig trunk release. Do you agree?
> >
> > Bests,
> > Jan.
> >
> >
> >
> > ______________________________________________________________
> >
> > > Od: jeichar@xxxxxxxxxxxxxxx
> > > Komu: andrea antonello <andrea.antonello@xxxxxxxxx>
> > > CC: "Fabio D'Ovidio" <fabiodovidio@xxxxxxxxx>,"Jan Jezek" <h.jezek@xxxxxxxxxx 
> > > >, udig-users@xxxxxxxxxxxxxxxxxxxxx
> > > Datum: 25.01.2008 18:58
> > > Předmět: Re: [udig-users] jgrass and georectify
> > >
> > > I think he has the tool.  But maybe he is having an problem using  
> > > it?
> > >
> > > I think the tool for uDig 1.1 only works for transforming Vector   
> > > layers.
> > The one on uDig trunk can transform rasters.  Sorry I took so  long  
> > to
> > realize that.
> >
> > > I will try to get a trunk version that you can try out.  But it will
> > probably be a couple weeks.
> >
> > > Jesse
> > >
> > > Le 25-Jan-08 `a 4:26 AM, andrea antonello a écrit :
> > >
> > >
> > > > Hi Fabio,
> > > >
> > > >
> > > > > ... i have the same problem...
> > > > I don't understand exactly what you mean by that. Jesse defines the
> > > > procedure and you say you have the same problem? Did I miss some  
> > > > mail?
> > > > Yesterday night I wasn't able to have a look at Jan's rc13
> > > > compatibility, since I was porting JGrass to rc14 compatibility.
> > > >
> > > > I would be willing to do so this night,
> > > >
> > > > Let me know,
> > > > Ciao
> > > > Andrea
> > > >
> > > >
> > > >
> > > >
> > > > > Jesse Eichar ha scritto:
> > > > >
> > > > > > The transform tool is on the update site.  Here are some vague
> > > > > > instructions on how to do it:
> > > > > >
> > > > > >  1. Help>Find and Install menu item
> > > > > >  2. Select "Search for new Features to install"
> > > > > >  3. Press next
> > > > > >  4. Press the "New Remote Site" Button
> > > > > >  5. Enter:
> > > > > >        1. Name - Community
> > > > > >        2. URL - http://udig.refractions.net/update-community
> > > > > >  6. Press ok
> > > > > >  7. Press Finish
> > > > > >  8. expand the Community item in the tree
> > > > > >  9. Select Jan Jezek
> > > > > > 10. Press Next
> > > > > > 11. Follow the instructions from here
> > > > > >
> > > > > >
> > > > > > Jesse
> > > > > >
> > > > > > Le 24-Jan-08 `a 1:27 AM, andrea antonello a écrit :
> > > > > >
> > > > > >
> > > > > > > Hmmm, that is a good question, for sure a too old one :)
> > > > > > > I gave a look at the svn community space of Jan and there is  
> > > > > > > also a
> > > > > > > 1.1 version of the plugin.
> > > > > > > I could compile it for you if needed, but I would prefer to  
> > > > > > > get a
> > > > > > > feedback from Jan first, I guess he has some updated version.
> > > > > > > Anyone knows if the mail I have of Jan is the proper one?
> > > > > > >
> > > > > > > Ciao
> > > > > > > Andrea
> > > > > > >
> > > > > > >
> > > > > > > On Jan 24, 2008 9:42 AM, Fabio D'Ovidio <fabiodovidio@xxxxxxxxx
> > > > > > > <mailto:fabiodovidio@xxxxxxxxx>> wrote:
> > > > > > >
> > > > > > > > I have installed the plugin on uDig 1.1.RC13, but when I type
> > > > > > > "Transform
> > > > > > >
> > > > > > > > tool" button nothing strat..
> > > > > > > >
> > > > > > > > Which version of uDIG shall I sue?
> > > > > > > >
> > > > > > > >
> > > > > > > > Thanks
> > > > > > > >
> > > > > > > > andrea antonello ha scritto:
> > > > > > > >
> > > > > > > > > On Jan 23, 2008 4:51 PM, Fabio D'Ovidio  
> > > > > > > > > <fabiodovidio@xxxxxxxxx
> > > > > > > > >                <mailto:fabiodovidio@xxxxxxxxx>> wrote:
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > > I'd like to georefernce a vector map using gereferenced one  
> > > > > > > > > > (in
> > > > > > > > > > Gauss-Boaga EPSG:3004) by clickking on the maps the GCP and
> > > > > > > > > > calculating
> > > > > > > > > > the RMS....
> > > > > > > > > Hmmm... with the RMS there could be problems, don't know a  
> > > > > > > > > tool
> > > > > > > > in the
> > > > > > > >
> > > > > > > > > geotools-udig base that does that. The only tool made for udig
> > > > > > > > doing
> > > > > > > >
> > > > > > > > > what you need seems to the following plugin:
> > http://udig.refractions.net/confluence/display/COM/Coordinate+Transformations
> >  http://docs.codehaus.org/display/GEOTOOLS/uDig+plugin+-+screenshots%21
> >
> > > > > > > > > Perhaps Jan is already on this list? Ping!
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Ciao
> > > > > > > > > Andrea
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > > Thanks
> > > > > > > > > >
> > > > > > > > > > andrea antonello ha scritto:
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > > Hi Fabio,
> > > > > > > > > > > guessing that georectify == ortorectify, the sad answer is  
> > > > > > > > > > > no.
> > > > > > > > > > > That is
> > > > > > > > > > > one of those tools of GRASS that need a user interaction  
> > > > > > > > > > > with
> > > > > > > > > > the
> > > > > > > > > >
> > > > > > > > > > > monitor of GRASS, in order to define the ground control
> > > > > > > > > > points. That
> > > > > > > > > >
> > > > > > > > > > > is one of the things that is not there yet.
> > > > > > > > > > >
> > > > > > > > > > > Is that what you are searching for? Or do you mean  >>>>>>>>
> > georeferencing?
> >
> > > > > > > > > > > Perhaps Jan Jezek's raster map warping plugin could be of
> > > > > > > > > > help to
> > > > > > > > > >
> > > > > > > > > > > you?
> > > > > > > > > > >
> > > > > > > > > > > First: what do you want to do exactly?
> > > > > > > > > > >
> > > > > > > > > > > Ciao
> > > > > > > > > > > Andrea
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > On Jan 23, 2008 3:11 PM, Fabio D'Ovidio <fabiodovidio@xxxxxxxxx
> > > > > > > > > > > <mailto:fabiodovidio@xxxxxxxxx>> wrote:
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > Hi all!
> > > > > > > > > > > > Is Georectify tool implemented in JGRASS? If not, is  
> > > > > > > > > > > > there any
> > > > > > > > > > > > equivalent tool in Jgrass?
> > > > > > > > > > > >
> > > > > > > > > > > > Thanks!
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > > Ing. Fabio D'Ovidio
> > > > > > > > > > > >
> > > > > > > > > > > > iQuadro - Informatica e Innovazione s.r.l.
> > > > > > > > > > > > Via C. Pisacane 23, Aversa (CE) - 81031
> > > > > > > > > > > > Web : www.ii2.it <http://www.ii2.it>
> > > > > > > > > > > > Tel.: 081 197 57 600
> > > > > > > > > > > > mail: fabiodovidio@xxxxxxxxx  
> > > > > > > > > > > > <mailto:fabiodovidio@xxxxxxxxx>
> > > > > > > > > > > >
> > > > > > > > > > > > _______________________________________________
> > > > > > > > > > > > udig-users mailing list
> > > > > > > > > > > > udig-users@xxxxxxxxxxxxxxxxxxxxx
> > > > > > > > > > > > <mailto:udig-users@xxxxxxxxxxxxxxxxxxxxx>
> > > > > > > > > > > > http://lists.refractions.net/mailman/listinfo/udig-users
> > > > > > > > > > --
> > > > > > > > > >
> > > > > > > > > > Ing. Fabio D'Ovidio
> > > > > > > > > >
> > > > > > > > > > iQuadro - Informatica e Innovazione s.r.l.
> > > > > > > > > > Via C. Pisacane 23, Aversa (CE) - 81031
> > > > > > > > > > Web : www.ii2.it <http://www.ii2.it>
> > > > > > > > > > Tel.: 081 197 57 600
> > > > > > > > > > mail: fabiodovidio@xxxxxxxxx <mailto:fabiodovidio@xxxxxxxxx>
> > > > > > > > --
> > > > > > > >
> > > > > > > > Ing. Fabio D'Ovidio
> > > > > > > >
> > > > > > > > iQuadro - Informatica e Innovazione s.r.l.
> > > > > > > > Via C. Pisacane 23, Aversa (CE) - 81031
> > > > > > > > Web : www.ii2.it <http://www.ii2.it>
> > > > > > > > Tel.: 081 197 57 600
> > > > > > > > mail: fabiodovidio@xxxxxxxxx <mailto:fabiodovidio@xxxxxxxxx>
> > > > > > > _______________________________________________
> > > > > > > udig-users mailing list
> > > > > > > udig-users@xxxxxxxxxxxxxxxxxxxxx
> > > > > > > <mailto:udig-users@xxxxxxxxxxxxxxxxxxxxx>
> > > > > > >            http://lists.refractions.net/mailman/listinfo/udig-users
> > > > > --
> > > > > Ing. Fabio D'Ovidio
> > > > >
> > > > > iQuadro - Informatica e Innovazione s.r.l.
> > > > > Via C. Pisacane 23, Aversa (CE) - 81031
> > > > > Web : www.ii2.it
> > > > > Tel.: 081 197 57 600
> > > > > mail: fabiodovidio@xxxxxxxxx
>
> --
> Ing. Fabio D'Ovidio
>
> iQuadro - Informatica e Innovazione s.r.l.
> Via C. Pisacane 23, Aversa (CE) - 81031
> Web : www.ii2.it
> Tel.: 081 197 57 600
> mail: fabiodovidio@xxxxxxxxx