Skip to main content
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [List Home]
Re: [sumo-user] Problem with converting vissim to sumo.
Hello,

Thank you for sending me the fixed latest development version.

I used netconvert command to convert vissim network file to sumo network file and then used the lasted updated convert_vissimXML_flows_statRoutes.py to convert the route file. Then I created a configuration file using net and rou files achieved.

When I run the configuration file, the result as follow:
Loading configuration... done.
Loading net-file from 'net.net.xml'... done (28ms).
Loading done.
Simulation started with time: 0.00
Error: Vehicle 'fl140005_st0.0.0' has no valid route. No connection between edge '140005' and edge '140003[0]'.
Quitting (on error).

I attach results of all above steps including netconvert, convert_vissimXML_flows_statRoutes.py and sumo-gui run.sumo.cfg to this email. Can you please tell me where the problem come from and what I should do to solve the problem?

Thank you very much.

Best regards,

Phuong.

On Wed, Oct 11, 2017 at 8:23 PM, Jakob Erdmann <namdre.sumo@xxxxxxxxxxxxxx> wrote:
Hello,
there was a bug in convert_vissimXML_flows_statRoutes.py that has been fixed in the latest development version (26431). You can get it here:
https://svn.code.sf.net/p/sumo/code/trunk/sumo/tools/import/vissim/convert_vissimXML_flows_statRoutes.py

regards,
Jakob

2017-10-04 15:25 GMT+02:00 Phuong Nguyen <phuongthimainguyen@xxxxxxxxx>:
Hello,

I am using the toolbox (convert_vissimXML_flows_statRoutes.py) to convert vissim to sumo route file and here is result:

Namespace(SUMO_net='net.net.xml', output_file='outputfile', vissim_input='robust_hmt_matlabhoz.inpx') 

---

* loading VISSIM net:
	 robust_hmt_matlabhoz.inpx
---

* loading SUMO net:
	 net.net.xml
Traceback (most recent call last):
  File "/home/phuong/Downloads/sumo-svn/tools/import/vissim/convert_vissimXML_flows_statRoutes.py", line 380, in <module>
    validate_rel_flow(routes_by_start_d)
  File "/home/phuong/Downloads/sumo-svn/tools/import/vissim/convert_vissimXML_flows_statRoutes.py", line 234, in validate_rel_flow
    route["rel_flow"][:, 0]) == False:
IndexError: too many indices for array

Can you please give me some ideas/suggestions to fix this error?
Thank you very much.

Best regards,

Phuong.

On Mon, Oct 2, 2017 at 7:56 AM, Phuong Nguyen <phuongthimainguyen@xxxxxxxxx> wrote:
Good morning,

Thank you for your instruction. 

Have a good day.

Best regards,

Phuong.

On Sun, Oct 1, 2017 at 9:40 PM, Jakob Erdmann <namdre.sumo@xxxxxxxxxxxxxx> wrote:
Hello,
the toolbox is part of the sumo download.
to import routes make sure you have a working python 2.7 installation (https://www.python.org/downloads/) and run the tool below (in sumo/tools/import/vissim)
convert_vissimXML_flows_statRoutes.py -V <vissim-file> -S <sumo-network-file> -o <output-filename>

regards,
Jakob

2017-10-01 21:37 GMT+02:00 Phuong Nguyen <phuongthimainguyen@xxxxxxxxx>:
Dear Jakob,

Thank you so much for your kindly help. 
I have successfully converted vissim inpx file to sumo (net.xml) file. However, in order to run the scenario using sumo, I need to convert route file as well. I found from http://sumo.dlr.de/wiki/Networks/Import/Vissim that I can use Vissim Import Toolbox to convert route file but unfortunately it is described in Germany. Is this toolbox exist and if so, where can I download it?

Thank you very much.

Best regards,

Phuong.


On Thu, Sep 28, 2017 at 11:18 AM, Jakob Erdmann <namdre.sumo@xxxxxxxxxxxxxx> wrote:
Thank you for providing the input file.
The error was due to a bug in netconvert which has now been fixed (revision [26264]).
You can either build this from source on linux or download the updated windows binaries tomorrow (http://sumo.dlr.de/wiki/Downloads#SUMO_-_Latest_Development_Version)

regards,
Jakob

2017-09-28 9:41 GMT+02:00 Jakob Erdmann <namdre.sumo@xxxxxxxxxxxxxx>:
Please send me the input inpx file so I can take a look myself.
regards,
Jakob

2017-09-27 9:40 GMT+02:00 Phuong Nguyen <phuongthimainguyen@xxxxxxxxx>:
Good morning,

I am so sorry for not explaining the report in detail.
I did replaced all empty values of xml attributes in the inpx file. After that, I run the netconvert command again but the result was the same with it before I replace empty values of xml attributes.
Here it is:

warning: Environment variable SUMO_HOME is not set, using built in type maps.
85
2
211.74
-1221.07, -1531.35 -1220.78, -1530.12 -1202.48, -1346.63 -1201.82, -1332.38 -1201.37, -1320.59
Error: Runtime error: Empty data while parsing 'robust.inpx'
Error: No nodes loaded.
Quitting (on error).

So, there is nothing different before and after I remove empty values of xml attributes in the inpx file.

Can you please give me any suggestion about this problem?

Many thanks and have a good day.

Best regards,

Phuong.

On Tue, Sep 26, 2017 at 8:41 PM, Jakob Erdmann <namdre.sumo@xxxxxxxxxxxxxx> wrote:
Please extend your report of "it does not work" with some details (i.e. an error message or other failure symptoms).

2017-09-26 18:47 GMT+02:00 Phuong Nguyen <phuongthimainguyen@xxxxxxxxx>:
Hello,

Thank you so much for your suggestion. I have replaced all empty values of xml attributes in the inpx file but it does not work.
Can you please give me more suggestions?

Thank you very much.

Best regards,

Phuong.

On Tue, Sep 26, 2017 at 1:44 PM, Jakob Erdmann <namdre.sumo@xxxxxxxxxxxxxx> wrote:
Somewhere in your inpx file is an xml attribute with an empty value (someAttribute=""). This is not expected by the importer.
Search for "" in your file and try to remove the attribute (or set an appropriate value).
regards,
Jakob

2017-09-26 14:34 GMT+02:00 Phuong Nguyen via sumo-user <sumo-user@lists.sourceforge.net>:
Hello,

I am trying to convert a vissim file to sumo using below command:

netconvert --vissim-file=robust.inpx --output-file=mySumofile.net.xml

and here is result:
warning: Environment variable SUMO_HOME is not set, using built in type
maps.
85
2
211.74
-1221.07, -1531.35 -1220.78, -1530.12 -1202.48, -1346.63 -1201.82, -1332.38
-1201.37, -1320.59
Error: Runtime error: Empty data while parsing 'robust.inpx'
Error: No nodes loaded.
Quitting (on error).

Can you please give me any suggestion with this problem.

Thank you very  much indeed.

Best regards,

Phuong.

--
Ms. Phuong Thi Mai Nguyen
PhD student, De Montfort University,
Leicester, UK.
 Email: <Email%3Antmphuong@xxxxxxxxxxx> phuongthimainguyen@xxxxxxxxx
          p14029633@xxxxxxxxxxxxxxxxx
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
sumo-user mailing list
sumo-user@xxxxxxxxxxxxxxxxxxxxt
https://lists.sourceforge.net/lists/listinfo/sumo-user
_______________________________________________
sumo-user mailing list
sumo-user@xxxxxxxxxxx
To change your delivery options, retrieve your password, or unsubscribe from this list, visit
https://dev.eclipse.org/mailman/listinfo/sumo-user




--
Ms. Phuong Thi Mai Nguyen
PhD student, De Montfort University, 




--
Ms. Phuong Thi Mai Nguyen
PhD student, De Montfort University, 





--
Ms. Phuong Thi Mai Nguyen
PhD student, De Montfort University, 




--
Ms. Phuong Thi Mai Nguyen
PhD student, De Montfort University, 



--
Ms. Phuong Thi Mai Nguyen
PhD student, De Montfort University, 




--
Ms. Phuong Thi Mai Nguyen
PhD student, De Montfort University, 

Attachment: results
Description: Binary data

Back to the top