Hello Beth,
I can't find anything in the log file concerning this problem.
If I use Eclipse with everything I have installed WITHOUT PTP,
then I can toggle breakpoints, enable, disable them, I can even leave them
intact and they are still visible as soon as I open the eclipse version which
has PTP installed, I cannot insert any new breakpoints, neither parallel nor
normal breakpoints.
I can go into normal non-parallel debug mode when PTP is
installed, but this is only slightly helpful if I have to step through to my
problem.
I have no idea what might be wrong there :-/
cheers,
meta
From: ptp-user-bounces@xxxxxxxxxxx
[mailto:ptp-user-bounces@xxxxxxxxxxx] On Behalf Of Beth Tibbitts
Sent: Donnerstag, 01. Oktober 2009 14:20
To: PTP User list
Subject: RE: [ptp-user] PTP with OpenMPI on Eclipse Galileo (Fedora)
breaks my Eclipse Installation
Meta,
Is there anything in your error log from the debugger problem?
<workspace>/.metadata/.log
...Beth
Beth Tibbitts (859) 243-4981 (TL 545-4981)
Eclipse Parallel Tools Platform http://eclipse.org/ptp
Mailing Address: IBM Corp., Coldstream Research Campus, 745 West New Circle
Road, Lexington, KY 40511
"private_meta" ---10/01/2009 05:46:52
AM---Hello Greg,
|
"private_meta" <private_meta@xxxxxx>
Sent by: ptp-user-bounces@xxxxxxxxxxx
10/01/2009
05:46 AM
|
Please respond to
PTP User list <ptp-user@xxxxxxxxxxx>
|
|
|
To
|
"'PTP User list'"
<ptp-user@xxxxxxxxxxx>
|
|
cc
|
|
|
Subject
|
RE: [ptp-user] PTP with OpenMPI on Eclipse
Galileo (Fedora) breaks my Eclipse Installation
|
|
Hello Greg,
I wanted to know
if there are any news on the problem, were you able to replicate the problem?
If so, is there anything I can do?
cheers,
meta
From: ptp-user-bounces@xxxxxxxxxxx [mailto:ptp-user-bounces@xxxxxxxxxxx]
On Behalf Of private_meta
Sent: Donnerstag, 17. September 2009 16:11
To: 'PTP User list'
Subject: RE: [ptp-user] PTP with OpenMPI on Eclipse Galileo (Fedora) breaks
my Eclipse Installation
Hi,
I've been using
build 200908291618 with CDT 6.0.1 build 200909110608 with a 64bit version of
Eclipse Galileo (i used the cdt version from the download page and updated the
needed packages with the cdt master 6.0.1.)
Thanks,
meta
From: ptp-user-bounces@xxxxxxxxxxx [mailto:ptp-user-bounces@xxxxxxxxxxx]
On Behalf Of Greg Watson
Sent: Donnerstag, 17. September 2009 16:02
To: PTP User list
Subject: Re: [ptp-user] PTP with OpenMPI on Eclipse Galileo (Fedora) breaks
my Eclipse Installation
Ok, thanks. I'll have to try to replicate the
problem. Which build of PTP 3.0 did you use?
Greg
On Sep 17, 2009, at 9:07 AM, private_meta wrote:
- I'm running
this on Fedora 11 with OpenMPI Version 1.3.2, gcc v4.4.1
- The MPI
program runs successfully when launched non-debug in eclipse as well as on the
shell
- openmpi see
first info
- My debugger
session address is set to "localhost" which resolves correctly to
127.0.0.1
- According to
my Project properties I am compiling the program with the flag -g3, so it
should be compiled for debugging.
Thanks,
meta
From: ptp-user-bounces@xxxxxxxxxxx [mailto:ptp-user-bounces@xxxxxxxxxxx]
On Behalf Of Greg Watson
Sent: Donnerstag, 17. September 2009 14:00
To: PTP User list
Subject: Re: [ptp-user] PTP with OpenMPI on Eclipse Galileo (Fedora) breaks
my Eclipse Installation
What platform are you running on?
Are you able to run the mpi program
successfully?
What version of open mpi are you using?
What do you have the debugger session address
set to?
Have you compiled the application for debugging
with -g?
On Sep 17, 2009, at 7:39 AM, private_meta wrote:
Hi,
Since the last
entry by Beth I've installed PTP 3.0 with Galileo. I built the new sdm with the
3.0 plugins and I also changed the SDM path in the debug configuration. The
parallel debugger does not work. Interestingly, the normal C debugger takes
30-60 seconds to boot up with a small test program.
Any more ideas?
best regards,
Meta
From: ptp-user-bounces@xxxxxxxxxxx [mailto:ptp-user-bounces@xxxxxxxxxxx]
On Behalf Of Greg Watson
Sent: Donnerstag, 17. September 2009 13:08
To: PTP User list
Subject: Re: [ptp-user] PTP with OpenMPI on Eclipse Galileo (Fedora) breaks
my Eclipse Installation
PTP 2.x only works with Ganymede, so its
necessary to use the pre-release version of 3.0 if you have Galileo.
Did you build the new sdm that came with the 3.0
plugins, or are you still using the 2.x version? That might be your problem.
Regards,
Greg
On Sep 17, 2009, at 4:42 AM, private_meta wrote:
Hi,
I didn't
actually think to use 3.0 as it's not final.
I tried it, and
at least normal debugging and project install works now. Still, using OpenMPI,
the Parallel Debugger doesn't seem to work correctly when using a local MPI
Installation.
In the Parallel
Debug view, when debugging, the Job shows as started and the Nodes seem to be
starting (blue diamond), but it doesn't continue and I cannot stop those
started sessions anymore without killing the sdm-debugger the hard way (only
after I do that, the 'Debugger has started, waiting for connection...' window
is coming up)
Any more info on
how I could solve that?
cheers,
meta
From: ptp-user-bounces@xxxxxxxxxxx [mailto:ptp-user-bounces@xxxxxxxxxxx]
On Behalf Of Beth Tibbitts
Sent: Mittwoch, 16. September 2009 15:35
To: PTP User list
Subject: RE: [ptp-user] PTP with OpenMPI on Eclipse Galileo (Fedora) breaks
my Eclipse Installation
You need to follow the release notes for PTP
3.0 that include how to get CDT 6.0.1
http://wiki.eclipse.org/PTP/release_notes/3.0
...Beth
Beth Tibbitts (859) 243-4981 (TL 545-4981)
Eclipse Parallel Tools Platform http://eclipse.org/ptp
Mailing Address: IBM Corp., Coldstream Research Campus, 745 West New Circle
Road, Lexington, KY 40511
<image001.gif>"private_meta"
---09/16/2009 08:27:46 AM---Hi Greg, I installed a current CDT-Version of
Eclipse and used the CDT Update Site for the Galileo Release (
|
"private_meta"
<private_meta@xxxxxx>
Sent by: ptp-user-bounces@xxxxxxxxxxx
09/16/2009 08:27 AM
|
|
<image003.png>
To
|
<image004.png>
"'PTP User list'" <ptp-user@xxxxxxxxxxx>
|
|
<image003.png>
cc
|
<image004.png>
|
|
<image003.png>
Subject
|
<image004.png>
RE: [ptp-user] PTP with OpenMPI on Eclipse Galileo (Fedora) breaks my
Eclipse Installation
|
|
<image004.png>
|
<image004.png>
|
|
Hi Greg,
I installed a current CDT-Version of Eclipse and used the CDT Update Site for
the Galileo Release (http://download.eclipse.org/tools/cdt/releases/galileo) to
install every missing CDT-Package to be sure (as it wouldn't install without
some of the additional CDT stuff anyway). Looking in the Installation Details
of Eclipse it tells me the installed version of CDT is at 6.0.0, build from mid
june.
cheers,
meta
From:
ptp-user-bounces@xxxxxxxxxxx [mailto:ptp-user-bounces@xxxxxxxxxxx] On Behalf Of Greg
Watson
Sent: Mittwoch, 16. September 2009 14:17
To: PTP User list
Subject: Re: [ptp-user] PTP with OpenMPI on Eclipse Galileo (Fedora) breaks
my Eclipse Installation
Hi meta,
Do you have CDT 6.0.1 installed? You'll need to get this from the CDT update
site, not from the Galileo update site. See the 3.0 release notes on the wiki
page for the link.
Greg
On Sep 16, 2009, at 8:09 AM, private_meta wrote:
Hi,
I tried to use Eclipse Galileo under Fedora and I tried to install PTP in the
current version (and previous builds, 2.1.0 to 2.1.3) but as soon as I install
any part of PTP, my eclipse installation pretty much breaks down and I can
neither create new C/C++ projects (Exception see [0]) nor debug correctly
anymore (see [1]). The version that would possibly work would be 2.0.*, but
that version is also riddled with some problems.
I wanted to ask if this has happened to others as well and what I could do, as
well as if it's possibly a problem with Eclipse Galileo.
I had an old Eclipse Version (Ganymede) with PTP 2.1.2, but I intended to use
the new Eclipse version.
It would be nice if someone could help me there.
cheers,
meta
[0] from the error log:
java.lang.NoClassDefFoundError:
org/eclipse/cdt/internal/ui/wizards/DefaultEntryDescriptor
at
org.eclipse.ptp.rdt.ui.wizards.RemoteMakefileWizard.createItems(RemoteMakefileWizard.java:55)
at org.eclipse.cdt.ui.wizards.CDTMainWizardPage.updateData(CDTMainWizardPage.java:289)
at
org.eclipse.cdt.ui.wizards.CDTMainWizardPage.createControl(CDTMainWizardPage.java:93)
at org.eclipse.jface.wizard.Wizard.createPageControls(Wizard.java:170)
at org.eclipse.jface.wizard.WizardDialog.createPageControls(WizardDialog.java:675)
at org.eclipse.jface.wizard.WizardDialog.setWizard(WizardDialog.java:1093)
at org.eclipse.jface.wizard.WizardDialog.updateForPage(WizardDialog.java:1152)
at org.eclipse.jface.wizard.WizardDialog.access$2(WizardDialog.java:1149)
at org.eclipse.jface.wizard.WizardDialog$5.run(WizardDialog.java:1138)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
at org.eclipse.jface.wizard.WizardDialog.showPage(WizardDialog.java:1136)
huge trace here, won't paste everything
... 57 more
[1] It tries to open the Remote C/C++ Editor, something it also does in debug
mode where I can't change it correctly
"Could not open the editor: The editor class could not be instantiated.
This usually indicates a missing no-arg constructor or that the editor's class
name was mistyped in plugin.xml."
_______________________________________________
ptp-user mailing list
ptp-user@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-user
_______________________________________________
ptp-user mailing list
ptp-user@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-user
_______________________________________________
ptp-user mailing list
ptp-user@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-user
_______________________________________________
ptp-user mailing list
ptp-user@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-user
_______________________________________________
ptp-user mailing list
ptp-user@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-user
_______________________________________________
ptp-user mailing list
ptp-user@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/ptp-user
