Skip to main content

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [List Home]
Re: [paho-dev] Paho Build help

I don't know enough technically to answer your question, but it is a legitimate question.  According to policy (pretty sure it is a written one, somewhere, but if not it is an obvious common sense one) that occasionally proprietary or non-free tools can be used by an Eclipse project in building or testing their code, BUT it can not be _required_ by committers or community. I'd guess in this case, the script or documentation needs to be improved to "swap in" some other compiler?

So I too look forward to an answer.  It would likely be worth a bugzilla report, if the answer is not obvious/easy and requires some work to improve script or documentation.

Thanks




From:        Julian Franks <julianatfranks@xxxxxxxxxxx>
To:        <paho-dev@xxxxxxxxxxx>,
Date:        08/31/2012 08:11 AM
Subject:        Re: [paho-dev] Paho Build help
Sent by:        paho-dev-bounces@xxxxxxxxxxx




Hi
I have not looked further at this issue but do attach a snap shot of the makefile error output:

Dont know much about build tool chains but understand that the line in the makefile where it is looking for the cross compiler and it cant find it, it just bails out to error.
Any help or work around for this would be most useful.

~/x-tools/arm-unknown-linux-uclibcgnueabi/bin/arm-unknown-linux-uclibcgnueabi-gcc -fPIC -Os -Wall -shared -Wl,-soname,libmqttv3c.so -o linux_ARM_uclibc/libmqttv3c.so /home/franksj/org.eclipse.paho.mqtt.c/src/*.c
/bin/sh: 1: /home/franksj/x-tools/arm-unknown-linux-uclibcgnueabi/bin/arm-unknown-linux-uclibcgnueabi-gcc: not found
make: *** [linux_ARM_uclibc/libmqttv3c.so] Error 127



> From: paho-dev-request@xxxxxxxxxxx
> Subject: paho-dev Digest, Vol 8, Issue 16
> To: paho-dev@xxxxxxxxxxx
> Date: Thu, 30 Aug 2012 12:00:08 -0400
>
> Send paho-dev mailing list submissions to
> paho-dev@xxxxxxxxxxx
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
http://dev.eclipse.org/mailman/listinfo/paho-dev
> or, via email, send a message with subject or body 'help' to
> paho-dev-request@xxxxxxxxxxx
>
> You can reach the person managing the list at
> paho-dev-owner@xxxxxxxxxxx
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of paho-dev digest..."
>
>
> Today's Topics:
>
> 1. Re: Paho build help (Ian Craggs)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 29 Aug 2012 17:31:45 +0100
> From: Ian Craggs <icraggs@xxxxxxxxxxxxxxxxxxxxxxx>
> To: General development discussions for paho project
> <paho-dev@xxxxxxxxxxx>
> Subject: Re: [paho-dev] Paho build help
> Message-ID: <503E43F1.6000101@xxxxxxxxxxxxxxxxxxxxxxx>
> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
>
> Julian,
>
> this should still have built the library for 32-bit Linux, regardless of
> this error (which I should fix - I'll get onto it). Did you look for it?
>
> (As an aside I would like to correct a misunderstanding. You do not
> have to pay anything for the cross-compilers! You can use crosstool-ng
> to build open source gcc cross-compilers. You can pay for some
> pre-built toolchains, but it is in many cases not necessary).
>
> Ian Craggs
>
> On 25/08/12 13:00, Julian Franks wrote:
> > Hi Paho community,
> >
> > First apologies for what some may seem an ignorant post, but i really
> > am stuck with the initial build procedure as written on the wiki for the
> > Client and core. The questions:
> > When i use the Makefile to compile the code as downloaded from git, i
> > get error 127 from the fact that i do not have the cross compiler
> > x-tools, and cannot afford the purchase cost of $1000 for what is
> > essentially an evaluation exercise. I really just want to play with it
> > in Eclipse and see what it can do!!
> > Is there a possible work around for this? or is there a case for
> > building it under Eclipse??
> >
> > I am building on a Ubuntu 12.04 32 bit system, so how much work is
> > required to compile it on said system ( i am a Good C programmer, but
> > not much experience in low level Linux stuff, so any advise would be
> > most welcome.
> >
> > Any help or pointers would be much appreciated.
> >
> > Thanks in advance
> > Brum65
> >
> >
> > _______________________________________________
> > paho-dev mailing list
> > paho-dev@xxxxxxxxxxx
> >
http://dev.eclipse.org/mailman/listinfo/paho-dev
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
http://dev.eclipse.org/mailman/private/paho-dev/attachments/20120829/9eec533f/attachment.html>
>
> ------------------------------
>
> _______________________________________________
> paho-dev mailing list
> paho-dev@xxxxxxxxxxx
>
http://dev.eclipse.org/mailman/listinfo/paho-dev
>
>
> End of paho-dev Digest, Vol 8, Issue 16
> ***************************************
_______________________________________________
paho-dev mailing list
paho-dev@xxxxxxxxxxx
http://dev.eclipse.org/mailman/listinfo/paho-dev


Back to the top