[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
[
List Home]
|
Re: [leshan-dev] no response after client hello with server rpk mode only
|
On Fri, 2017-02-10 at 09:39 +0900, Joseph Cho wrote:
> Hi,
>
> >The leshan-server-demo supports only PSK and RPK
> Thanks for your reply.
>
> Let me rephrase my question.
>
> For rpk , I test the case
> "Client and Server Use Raw Public Keys"
> (cf https://tools.ietf.org/html/rfc7250#section-5.2 )
> and handshake is ok (see Fig.1 below).
>
> I test another one , which is the case "
> Server Uses a Raw Public Key"
> (cf. https://tools.ietf.org/html/rfc7250#section-5.1 ).
> My question is here.
> If client does not use a raw public and server use a raw public,
> it seems leshan-server doesn't work properly after client hello in handshake
> protocol.
In your setup, do you want to prevent the client from being authenticated at all
or do you want to use an X.509 certificate on the client and a RawPublicKey on
the server?
> Hello Verify Request doesn't come from server. (see Fig.2 below)
> Does leshan-server or leshan-server-demo supports
> both "Client and Server Use Raw Public Keys" case and
> "Server Uses a Raw Public Key" case?
>
> Thanks,
> Joseph
>
> [Fig.1]
>
>
>
> [Fig.2]
>
>
> --------- Original Mail ---------
> Sender: Simon Bernard <contact@xxxxxxxxxxxxxxx>
> Receiver: leshan developer discussions <leshan-dev@xxxxxxxxxxx>
> Date: 2017/2/9 Thur, 14:47:46 +0900
> Title: Re: [leshan-dev] no response after client hello with server rpk
> mode only
>
> Hi,
> The leshan-server-demo supports only PSK and RPK. (x509 is not supported)
> Simon
>
> Le 09/02/2017 à 11:42, pspice27@xxxxxxxxxxx a écrit :
> >
> > Hi, all
> >
> > I modified the wakaama client for supporting rpk mode (both server and
> > client)
> > and sucessfully work with leshan server.
> >
> > But I have no respone after client hello in handshake protocol for
> > setting server rpk mode only.
> > Using wireshark I checked extension client_certificate_type info is omitted
> > in client hello
> > and other info. is same as rpk mode supporting both server and client side.
> >
> > My question is "Doesn't leshan server support server rpk mode only?"
> >
> > FYI, I use leshan server version getting from here
> > https://hudson.eclipse.org/leshan/job/leshan/lastSuccessfulBuild/artifact/les
> > han-server-demo.jar
> >
> > Thank you.
> >
> >
> > _______________________________________________
> > leshan-dev mailing list
> > leshan-dev@xxxxxxxxxxx
> > To change your delivery options, retrieve your password, or unsubscribe from
> > this list, visit
> > https://dev.eclipse.org/mailman/listinfo/leshan-dev
>
> _______________________________________________
> leshan-dev mailing list
> leshan-dev@xxxxxxxxxxx
> To change your delivery options, retrieve your password, or unsubscribe from th
> is list, visit
> https://dev.eclipse.org/mailman/listinfo/leshan-dev
>
>
>
> _______________________________________________
> leshan-dev mailing list
> leshan-dev@xxxxxxxxxxx
> To change your delivery options, retrieve your password, or unsubscribe from
> this list, visit
> https://dev.eclipse.org/mailman/listinfo/leshan-dev
