Skip to main content
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [List Home]
Re: [geomesa-users] Test Failures most recent MASTER branch 
Chris,

Yes, that specific issue should have been addressed, and should be
included in what you grab from GitHub.

Sincerely,
  -- Chris Eichelberger


On Tue, 2014-06-03 at 17:08 +0000, Chris Snider wrote:
> Chris,
> 
> I'll have to go back and run a couple of clean install builds to see what issues I get.  I'll let you know.
> 
> BTW,
> I was grabbing the latest thinking that the GEOMESA-62 was included in one of them.  This was the performance issue I had when moving down through zoom levels in the layer preview app built into GeoServer.  Do you know if that issue was addressed?
> 
> Chris Snider
> Senior Software Engineer
> Intelligent Software Solutions, Inc.
> 
> 
> 
> -----Original Message-----
> From: geomesa-users-bounces@xxxxxxxxxxxxxxxx [mailto:geomesa-users-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Chris Eichelberger
> Sent: Tuesday, June 03, 2014 11:05 AM
> To: Geomesa User discussions
> Subject: Re: [geomesa-users] Test Failures most recent MASTER branch
> 
> Chris,
> 
> I've rebuilt the tip of the accumulo1.5.x/1.x branch of GeoMesa with the JDK 1.7.0_17, and have not been able to reproduce the error in the Avro unit-test.
> 
> Just for a foil, I also checked out the tip of master, and that rebuilt as well with the JDK 1.7.0_17.
> 
> At the moment, I'm temporarily out of ideas.  Is the error the same every time you rebuild?
> 
> Thanks.
> 
> Sincerely,
>   -- Chris Eichelberger
> 
> 
> On Thu, 2014-05-29 at 17:22 +0000, Chris Snider wrote:
> > Anthony,
> > 
> >  
> > 
> > I have been using 1.7
> > 
> >  
> > 
> > java -version
> > 
> > java version "1.7.0_17"
> > 
> > Java(TM) SE Runtime Environment (build 1.7.0_17-b02)
> > 
> > Java HotSpot(TM) Client VM (build 23.7-b01, mixed mode)
> > 
> >  
> > 
> >  
> > 
> > Chris Snider
> > 
> > Senior Software Engineer
> > 
> > Intelligent Software Solutions, Inc.
> > 
> > Description: Description: Description:
> > cid:image001.png@01CA1F1F.CBC93990
> > 
> >  
> > 
> > From: geomesa-users-bounces@xxxxxxxxxxxxxxxx
> > [mailto:geomesa-users-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Anthony 
> > Fox
> > Sent: Thursday, May 29, 2014 11:19 AM
> > To: Geomesa User discussions
> > Subject: Re: [geomesa-users] Test Failures most recent MASTER branch
> > 
> >  
> > 
> > Ah good.  FYI, we're going to support multiple versions of accumulo 
> > with the same version of GeoMesa, so we've decided on a new naming 
> > scheme that reflects the version of Accumulo in the name of the 
> > artifacts. Hopefully this didn't cause too much confusion.
> > 
> > 
> > Chris, what version of java are you using to build the acc1.5.x/1.x 
> > branch?
> > 
> > 
> >  
> > 
> > On Thu, May 29, 2014 at 1:05 PM, Chris Snider 
> > <chris.snider@xxxxxxxxxx> wrote:
> > 
> > Anthony,
> > 
> >  
> > 
> > Cloning with this command (git clone
> > git@xxxxxxxxxx:locationtech/geomesa.git)
> > 
> > Results in branched source: (accumulo1.5.x/1.x)>
> > 
> >  
> > 
> >  
> > 
> >  
> > 
> > Chris Snider
> > 
> > Senior Software Engineer
> > 
> > Intelligent Software Solutions, Inc.
> > 
> > 
> > Description: Description: Description:
> > cid:image001.png@01CA1F1F.CBC93990
> > 
> >  
> > 
> > From:geomesa-users-bounces@xxxxxxxxxxxxxxxx
> > [mailto:geomesa-users-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Anthony 
> > Fox
> > Sent: Thursday, May 29, 2014 11:01 AM
> > To: Geomesa User discussions
> > Subject: Re: [geomesa-users] Test Failures most recent MASTER branch
> > 
> >  
> > 
> > accumulo1.5.x/1.x is the default branch that shows up on github.  When 
> > you clone the repo into a clean directory, is that the starting branch 
> > or is it still master?
> > 
> > 
> >  
> > 
> > On Thu, May 29, 2014 at 11:49 AM, Chris Eichelberger <cne1x@xxxxxxxx>
> > wrote:
> > 
> > Chris,
> > 
> > We will look into that issue.
> > 
> > A relatively recent change is that the new default branch for GeoMesa
> > --
> > and the branch that you should download and build -- is 
> > "accumulo1.5.x/1.x" rather than "master".  Sorry for the confusion.
> > 
> > Thanks!
> > 
> > Sincerely,
> >   -- Chris
> > 
> > 
> > 
> > On Thu, 2014-05-29 at 15:22 +0000, Chris Snider wrote:
> > > Hi,
> > >
> > >
> > >
> > > I grabbed the latest master this morning and ran mvn clean install
> > to
> > > build.  I get the following (and attached) error
> > >
> > >
> > >
> > >
> > ----------------------------------------------------------------------
> > ---------
> > >
> > > Test set: geomesa.core.avro.FeatureSpecificReaderTest
> > >
> > >
> > ----------------------------------------------------------------------
> > ---------
> > >
> > > Tests run: 6, Failures: 1, Errors: 0, Skipped: 0, Time elapsed:
> > 2.547
> > > sec <<< FAILURE! - in geomesa.core.avro.FeatureSpecificReaderTest
> > >
> > > testComplexDeserialize(geomesa.core.avro.FeatureSpecificReaderTest)
> > > Time elapsed: 0.048 sec  <<< FAILURE!
> > >
> > > org.junit.ComparisonFailure: expected:<[??????????]> but 
> > > was:<[??????????]>
> > >
> > >                 at org.junit.Assert.assertEquals(Assert.java:123)
> > >
> > >                 at org.junit.Assert.assertEquals(Assert.java:145)
> > >
> > >                 at geomesa.core.avro.FeatureSpecificReaderTest
> > > $$anonfun$testComplexDeserialize$1$$anonfun$apply$mcVI$sp
> > > $2.apply(FeatureSpecificReaderTest.scala:270)
> > >
> > >                 at geomesa.core.avro.FeatureSpecificReaderTest
> > > $$anonfun$testComplexDeserialize$1$$anonfun$apply$mcVI$sp
> > > $2.apply(FeatureSpecificReaderTest.scala:269)
> > >
> > >                 at
> > > scala.collection.immutable.List.foreach(List.scala:318)
> > >
> > >                 at geomesa.core.avro.FeatureSpecificReaderTest
> > > $$anonfun$testComplexDeserialize$1.apply$mcVI
> > > $sp(FeatureSpecificReaderTest.scala:269)
> > >
> > >                 at scala.collection.immutable.Range.foreach$mVc
> > > $sp(Range.scala:141)
> > >
> > >                 at
> > >
> > geomesa.core.avro.FeatureSpecificReaderTest.testComplexDeserialize(Fea
> > tureSpecificReaderTest.scala:265)
> > >
> > >
> > >
> > > Chris Snider
> > >
> > > Senior Software Engineer
> > >
> > > Intelligent Software Solutions, Inc.
> > >
> > > Direct (719) 452-7257
> > >
> > 
> > 
> > > Description: Description: Description:
> > > cid:image001.png@01CA1F1F.CBC93990
> > >
> > >
> > >
> > >
> > 
> > 
> > > _______________________________________________
> > > geomesa-users mailing list
> > > geomesa-users@xxxxxxxxxxxxxxxx
> > > http://www.locationtech.org/mailman/listinfo/geomesa-users
> > 
> > _______________________________________________
> > geomesa-users mailing list
> > geomesa-users@xxxxxxxxxxxxxxxx
> > http://www.locationtech.org/mailman/listinfo/geomesa-users
> > 
> > 
> >  
> > 
> > 
> > 
> > _______________________________________________
> > geomesa-users mailing list
> > geomesa-users@xxxxxxxxxxxxxxxx
> > http://www.locationtech.org/mailman/listinfo/geomesa-users
> > 
> > 
> >  
> > 
> > 
> > _______________________________________________
> > geomesa-users mailing list
> > geomesa-users@xxxxxxxxxxxxxxxx
> > http://www.locationtech.org/mailman/listinfo/geomesa-users
> 
> _______________________________________________
> geomesa-users mailing list
> geomesa-users@xxxxxxxxxxxxxxxx
> http://www.locationtech.org/mailman/listinfo/geomesa-users
> _______________________________________________
> geomesa-users mailing list
> geomesa-users@xxxxxxxxxxxxxxxx
> http://www.locationtech.org/mailman/listinfo/geomesa-users

Back to the top