Skip to main content

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [List Home]
Re: [cdt-dev] CDT problems after upgrading to Cygwin 1.7

Hi Nils,
What kind of project are you creating and what toolchain? Is it Makefile Project?

Also, what problem did you have with sh.exe? Did you delete it accidentally?


On Fri, Jan 8, 2010 at 5:17 AM, Hagge, Nils <nils.hagge@xxxxxxxxxxx> wrote:
Dear friends,
unfortunately I had to upgrade Cygwin and now I CDT does no longer work
correctly. I fixed some problems, but now I am stuck.
First problems was that sh.exe was deleted. This problem is fixed.
My cygwin setup looks as follows.
$ cat /etc/setup/installed.db
alternatives alternatives-1.3.30c-10.tar.bz2 0
base-cygwin base-cygwin-2.1-1.tar.bz2 0
base-files base-files-3.9-3.tar.bz2 0
base-passwd base-passwd-3.1-1.tar.bz2 0
bash bash-3.2.49-23.tar.bz2 0
binutils binutils-2.19.51-1.tar.bz2 0
bzip2 bzip2-1.0.5-10.tar.bz2 0
coreutils coreutils-7.0-2.tar.bz2 0
cppunit cppunit-1.12.0-1.tar.bz2 0
cygutils cygutils-1.4.2-1.tar.bz2 0
cygwin cygwin-1.7.1-1.tar.bz2 0
cygwin-doc cygwin-doc-1.5-1.tar.bz2 0
dash dash- 0
editrights editrights-1.01-2.tar.bz2 0
findutils findutils-4.5.5-1.tar.bz2 0
gawk gawk-3.1.7-1.tar.bz2 0
gcc-core gcc-core-3.4.4-999.tar.bz2 0
gcc-g++ gcc-g++-3.4.4-999.tar.bz2 0
gcc-java gcc-java-3.4.4-999.tar.bz2 0
gcc-mingw-core gcc-mingw-core-20050522-1.tar.bz2 0
gcc-mingw-g++ gcc-mingw-g++-20050522-1.tar.bz2 0
gcc-mingw-java gcc-mingw-java-20050522-1.tar.bz2 0
gdb gdb-6.8-2.tar.bz2 0
gettext gettext-0.17-11.tar.bz2 0
grep grep-2.5.4-2.tar.bz2 0
groff groff-1.19.2-2.tar.bz2 0
gzip gzip-1.3.12-2.tar.bz2 0
ipc-utils ipc-utils-1.0-1.tar.bz2 0
less less-429-1.tar.bz2 0
libbz2_1 libbz2_1-1.0.5-10.tar.bz2 0
libgcc1 libgcc1-4.3.4-3.tar.bz2 0
libgmp3 libgmp3-4.3.1-3.tar.bz2 0
libiconv2 libiconv2-1.13.1-1.tar.bz2 0
libintl3 libintl3-0.14.5-1.tar.bz2 0
libintl8 libintl8-0.17-11.tar.bz2 0
libncurses8 libncurses8-5.5-10.tar.bz2 0
libncurses9 libncurses9-5.7-16.tar.bz2 0
libpcre0 libpcre0-8.00-1.tar.bz2 0
libpopt0 libpopt0-1.6.4-4.tar.bz2 0
libreadline7 libreadline7-6.0.3-2.tar.bz2 0
libstdc++6 libstdc++6-4.3.4-3.tar.bz2 0
login login-1.10-10.tar.bz2 0
make make-3.81-2.tar.bz2 0
man man-1.6e-1.tar.bz2 0
mingw-runtime mingw-runtime-3.17-1.tar.bz2 0
rebase rebase-3.0.1-1.tar.bz2 0
run run-1.1.12-11.tar.bz2 0
sed sed-4.1.5-2.tar.bz2 0
tar tar-1.22-1.tar.bz2 0
tcltk tcltk-20080420-1.tar.bz2 0
terminfo terminfo-5.7_20091114-13.tar.bz2 0
terminfo0 terminfo0-5.5_20061104-11.tar.bz2 0
texinfo texinfo-4.13-3.tar.bz2 0
tzcode tzcode-2009k-1.tar.bz2 0
w32api w32api-3.14-1.tar.bz2 0
which which-2.20-2.tar.bz2 0
zlib zlib-1.2.3-10.tar.bz2 0
zlib-devel zlib-devel-1.2.3-10.tar.bz2 0
zlib0 zlib0-1.2.3-10.tar.bz2 0
_update-info-dir _update-info-dir-00843-1.tar.bz2 0
From a previous question from Markus on 2009-01-31 I learned that
a package named "gcc" should be installed. I only have gcc-core and do not
know how to get just gcc. Maybe I am looking at a false trace, since when
I type "gcc" into a bash, gcc is found.
CDT can compile C source, but CDT cannot find/resolve standard include paths anymore!
Please help....
Mit freundlichen Grüßen / Best regards

Dr. Nils Hagge

Projektleiter Vorfeld

Siemens AGIndustry Sector, I IA&DT ATS 13
Telefon +49 911 895-3484
Telefax +49 911 895-153484

Siemens Aktiengesellschaft: Chairman of the Supervisory Board: Gerhard Cromme
Managing Board: Peter Loescher, Chairman, President and Chief Executive Officer;
Wolfgang Dehen, Heinrich Hiesinger, Joe Kaeser, Jim Reid-Anderson, Hermann Requardt,
Siegfried Russwurm, Peter Y. Solmssen
Registered offices: Berlin and Munich;
Commercial registries: Berlin Charlottenburg, HRB 12300, Munich, HRB 6684
WEEE-Reg.-No. DE 23691322

cdt-dev mailing list

Back to the top