| |
1440 Search Results Found |
| 1 |
Forum: Eclipse Titan «»
Posted on: Fri, 31 May 2024 15:18 «»
By: Olaf Bergengruen
Re: Native ASN.1 PER for CHOICE
Hi Anton,
I just tested your data in my test environment: Titan (version 10.1.0) works fine.
Below my test case verifying encoding/decoding:
testcase TC_121() runs on TestSystem system TestSystem {
var CellGroupConfig v_Decoded_CellGroupConf...
|
| 2 |
Forum: Newcomers «»
Posted on: Tue, 28 May 2024 01:35 «»
By: sob adiet
Re: How to Import new version of a class from a jar file created in another Maven project
When attempting to build Project A in Eclipse, I suspect that the import line is importing from an older version of the Address class rather than the updated one from the jar file. It has been informed to me that the problem here is that Maven does not use...
|
| 3 |
Forum: Papyrus «»
Posted on: Wed, 27 March 2024 16:37 «»
By: Carsten Pitz
Re: Getting Started
In my opinion the best Eclipse Papyrus manual are the UML and SysML specifications.
Papyrus very straightforward implements these specifications.
The first questions starting a model for me are
Who are the stakeholders to address?
What complexity is...
|
| 4 |
Forum: Standard Widget Toolkit (SWT) «»
Posted on: Sat, 06 January 2024 03:29 «»
By: zhangyuxiang Mising name
Re: Make swt easier， welcome to join us
Dynamic model programming is generally programmed while the system is running, usually through various tools to help with programming, so it is usually demonstrated through videos. If there were more demonstrations, there would be a lot of videos on this p...
|
| 5 |
Forum: Java Development Tools (JDT) «»
Posted on: Fri, 05 January 2024 19:50 «»
By: Jozef Tomek
Re: JavaDoc readability improvements proposal + prototype (primarly methods)
Progress update:
To prevent disappointment later (in case someone was hoping to see these improvements in the next Eclipse release) then sorry but this will definitely not be ready for pull request to make it into 2024-03. M1 deadline is 01/12 (after wh...
|
| 6 |
Forum: Remote Application Platform (RAP) «»
Posted on: Tue, 28 November 2023 09:21 «»
By: MICHAEL SHAWO
equinox Servlet throw an exception during the int stage
I have a web application that has been tested successfully with Java 8 and Java 11, but when I try to start the Tomcat server with Java 17, it throws an exception during the initial stage of the init() method. I attempted to address the issue by updating t...
|
| 7 |
Forum: Java Development Tools (JDT) «»
Posted on: Tue, 22 August 2023 08:00 «»
By: Marcus Haarmann
Directories in ISO Charset not shown in Project explorer
We are running a couple of older projects in ISO8859-15 locale.
In order for eclipse to show these folders correctly, eclipse is started with a number of environment settings, leading to this locale (which is also stated in the preferences->workspace a...
|
| 8 |
Forum: Mosquitto «»
Posted on: Fri, 18 August 2023 14:25 «»
By: Juergen Babenhauserheide
MQTT no connection
Hello,
I have the following problem:
A connection to MQTT via my 1st PC (WINDOWS10) works with the corresponding IP address
A connection to MQTT via my 2nd PC (WINDOWS11) does not work with the corresponding IP address.
One difference between the two P...
|
| 9 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Wed, 26 July 2023 09:17 «»
By: Vadim RTV
Porting Forte.
Hi!
I am porting Forte to a new PLC. Questions please help:
1. How many FB blocks can be in a project and how to implement there are a large number of them to view project pages on the screen. A project can have dozens if not hundreds of FBs.
It's not c...
|
| 10 |
Forum: Papyrus «»
Posted on: Mon, 24 April 2023 02:38 «»
By: guo jie
Re: Compile the papyrus source code
hello ,
When using "mvn clean verify" to compile, there is a dependency download failure, as shown in Figure 2. When accessing the address with the dependency, a "Not Found" error occurs, as shown in Figure 3. How to solve this situati...
|
| 11 |
Forum: EMF «»
Posted on: Thu, 20 April 2023 13:18 «»
By: Eike Stepper
Re: [CDO] Building with Tycho
Thanks ;-)
I'm doing that also via Oomph to inject the following into all my eclipse.ini files:
-DDDXdebug
-DDDXrunjdwp:transport=dt_socket,server=y,suspend=n,address=8123
The latter :P
But now I have all the settings adjusted on the...
|
| 12 |
Forum: Eclipse Scout «»
Posted on: Thu, 16 March 2023 14:06 «»
By: Nils Israel
Select contents on start edit of input field
Hi,
is it possible to automatically select the contents of an input field (String, Long, BigDecimal, ...) in Scout Classic when the users clicks in the field. The intention is to replace the contents by starting to type or to add, after using for example ...
|
| 13 |
Forum: Mosquitto «»
Posted on: Thu, 08 December 2022 20:36 «»
By: Garrett Brennan
Connecting to broker with username and password using mqtt.js
Hi
I am using JavaScript / mqtt.js to connect to a Mosquitto broker.
I had everything working, and then I upgraded to the Mosquitto version 2.0.15, and now I cannot connect to the broker.
Could you read the following, and see if you have any suggestio...
|
| 14 |
Forum: EMF «»
Posted on: Mon, 21 November 2022 09:58 «»
By: Alain Picard
Re: [CDO] CDOStaleReferencePolicy & EMap
Eike,
I added the block that you suggested and also to be sure:
if (featureParam.isMany())
{
if (type.getInstanceClassName() == "java.util.Map$Entry") //$NON-NLS-1$
{
...
|
| 15 |
Forum: C / C++ IDE (CDT) «»
Posted on: Mon, 17 October 2022 13:08 «»
By: David Smith
Start GDB with "target extended-remote"
Hello,
I'm trying to debug my Atmel SAME54 board using GDB and OpenOCD.
When I launch a debug session, all my breakboints are ignored with the message:
Break at address "0x420" with no debug information available, or outside of program cod...
|
| 16 |
Forum: Oomph «»
Posted on: Wed, 07 September 2022 17:33 «»
By: Ed Merks
Re: Eliminate EGit Repository from Installation
Depending on that tasks you use, there are URLs added because the task requires it for the implementation. These are represented as EAnnotations on the Ecore model of the task class. So if you have a git clone task in your setup, you must install Oomph...
|
| 17 |
Forum: Newcomers «»
Posted on: Fri, 02 September 2022 06:07 «»
By: Ed Merks
Re: Configure Network Proxy Error
So you tried -Djavax.net.ssl.trustStoreType=Windows-ROOT but that didn't help?
So now you want to try this:
1.) Launch Firefox as the most obvious of my available browsers.
2.) Configure Firefox manually to use the same proxy, that I had in Eclipse....
|
| 18 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Mon, 08 August 2022 07:12 «»
By: jack li
OPCUA address
dear author
I have a problem. When I make a compound function block with an OPCUA address in it, such as "opc_ua[WRITE;/myarea/DI0]", when I call the block twice in my main program, the first variable address is overwritten.so.do you have any go...
|
| 19 |
Forum: EGit / JGit «»
Posted on: Fri, 24 June 2022 10:55 «»
By: Pratap Meka
Retrieve User Name and Email Address from the Git Repo
Hi Team,
I want to retrieve the User Name & Email Address for a given Git Repository using Jgit API.
Example Code snippet:
Git gitRepo = Git.open(new File("C:\\TestRepo\\"));
PersonIdent personIdent = new PersonIdent(gitRepo.getRepo...
|
| 20 |
Forum: Newcomers «»
Posted on: Fri, 24 June 2022 10:52 «»
By: Pratap Meka
Retrieve User Name and Email Address from the Git Repo
Hi Team,
I want to retrieve the User Name & Email Address for a given Git Repository using Jgit API.
Example Code snippet:
Git gitRepo = Git.open(new File("C:\\TestRepo\\"));
PersonIdent personIdent = new PersonIdent(gitRepo.get...
|
| 21 |
Forum: Mosquitto «»
Posted on: Mon, 02 May 2022 13:19 «»
By: Gaurav Kumar
Client <unknown> disconnected: Unknown error
I am experiencing an issue wherein the MQTT broker rejects clients request for reconnection with the below error message in the log file
2022-04-20T00:03:21: New connection from 12.435.3.657:42494 on port 8883.
2022-04-20T00:03:21: Client <unknown&...
|
| 22 |
Forum: Mosquitto «»
Posted on: Thu, 14 April 2022 02:51 «»
By: Greg McNamara
Bridge connection to remote broker fails and doesn't try to reconnect
Newbie Eclipse Forum user here. I have set up a mosquitto bridge connecting to a remote broker and it does connect successfully most of the time, but sometimes it sends a connection request and doesn't receive the CONNACK. I can see on the remote side it i...
|
| 23 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Sun, 10 April 2022 17:55 «»
By: Alois Zoitl
Re: New to 4diuc - Distribute Application Across Different Architectures?
I think some parts you figured out. In general this should work. For UDP ports we are binding only on the UDP multicast address. But nonetheless the network config can get quite tricky and nearly always when this is happening some network config needs to ...
|
| 24 |
Forum: ATL «»
Posted on: Mon, 14 March 2022 05:17 «»
By: qiaosen liu
Does eclipse still support the AMMA platform?
I want to use AMMA platform tools in eclipse, including KM3, ATL and TCS. But I didn't find the download address for KM3 and TCS, and of course I didn't find the download address for AMMA. Can anyone tell me where to download it?
|
| 25 |
Forum: C / C++ IDE (CDT) «»
Posted on: Wed, 26 January 2022 10:09 «»
By: addi gde
registers mapping through header files in eclipse IDE
Hello!
Ive got MIPS=SDK and MIPS32 MCU and I want to integrate to it registers mapping through header files
All registers goes from base address in internal RAM so how should I set base adresses of peritheral and system registers?
Should I defined the...
|
| 26 |
Forum: TMF (Xtext) «»
Posted on: Tue, 25 January 2022 04:05 «»
By: John Dreight
Position of Comments in a Line
Hi Eclipse forum,
Is it possible to always force comments to move to the end of their line during serialization? My dilemma is that I've parsed a model and used API commands to add some extra arguments to a line with a comment and the arguments were sim...
|
| 27 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Sat, 08 January 2022 11:51 «»
By: Michael Taxis
Re: compile Forte with OPCUA on Raspberry
Yes, I switched to 'v1.0' as in the docs.
In order to make things for me a little bit easier I also installed cmake-gui on the RPi and selected the options I needed.
I also tried newer versions of open62541 like 'v1.2.3' or even 'v1.3 rc1' and failed. W...
|
| 28 |
Forum: C / C++ IDE (CDT) «»
Posted on: Tue, 09 November 2021 20:00 «»
By: Michael Von Ahnen
How do I set the FLASH address
I am converting a project from another tool and while I am able to compile and link the project, it is not picking up the FLASH and RAM memory addresses for the linker to link the project. The result the FLASH address is being set to 0x8000.
I don't se...
|
| 29 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Thu, 04 November 2021 20:18 «»
By: Alois Zoitl
Re: Simulator 4DIAC
Hi,
yes if you have the application corresponding to the boot file in 4diac IDE and you have a TCP connection to your device you can set the TCP address of your device in the system configuration. Afterwards by enabling monitoring you can watch your app...
|
| 30 |
Forum: Eclipse Ditto «»
Posted on: Mon, 18 October 2021 12:01 «»
By: Vit Holasek
Re: Receiving responses from Ditto twin commans over Hono MQTT adapter
Hi Thomas,
thank you, now I understand it. Using the address "command/org.eclipse.packages.c2e" as reply-to now works as expected.
|
| 31 |
Forum: Sirius «»
Posted on: Thu, 16 September 2021 16:24 «»
By: Roman Gural
Re: Error: Unable to read repository at....
Thanks for the replies, I wanted to clarify a couple of things. when I created my original post I did have a unintentional typo that Ed pointed out 'download. eclipse.ord'. I added the spaces in the URL address because I was restricted in sharing links sin...
|
| 32 |
Forum: NatTable «»
Posted on: Wed, 15 September 2021 08:43 «»
By: Dirk Fauth
Re: natExporter.exportMultipleNatTables tables are overlapping
If you really use a NatTable Version 1.8 (that does not exist officially) I assume you have some local modifications/fixes that forced you to create a new non-official NatTable release.
In that case I request a contact person in your company that I can ...
|
| 33 |
Forum: Eclipse Ditto «»
Posted on: Fri, 03 September 2021 15:39 «»
By: Amaury Guichard
How do you configure an Http-push connection ?
Hello !
I'm trying to make a custom protocol mapper by implementing the MessageMapper Interface.
If I understood everything correctly, in order for Ditto to use this custom mapper you need to create a new connection.
I tried creating a new http connect...
|
| 34 |
Forum: Eclipse Titan «»
Posted on: Tue, 10 August 2021 11:45 «»
By: Weetara Wangsuknirun
Communicate Rise V2G with raspberry pi
Hello,
I use your Rise V2G folder which I found from https://github.com/SwitchEV/RISE-V2G with Eclipse Titan program (2020-12). I try to communicate it with my raspberry pi via ip address. I've known that my raspberry's ip address is ' fe80::3810:380c:f...
|
| 35 |
Forum: Mosquitto «»
Posted on: Tue, 27 July 2021 16:20 «»
By: Robert Binet
eclipse-mosquitto Error: Address not available
Hi,
eclipse-mosquitto 2.0.11 installed with docker is not working
eclipse-mosquitto 1.6.15 is working correctly
See Below
Robert
LOGS:
2021-07-27T15:42:06: mosquitto version 1.6.15 starting
2021-07-27T15:42:06: Config loaded from /mosquitto/...
|
| 36 |
Forum: Oomph «»
Posted on: Sat, 26 June 2021 10:49 «»
By: Daniel Mising name
2021-06 - "Oomph All" installation fails
Hi there,
is there a way for me to resolve this on my end? Installing "Oomph All" into jee-latest-released (2021-06) fails with:
Cannot complete the install because one or more required items could not be found.
Software being installe...
|
| 37 |
Forum: Sirius «»
Posted on: Wed, 26 May 2021 07:11 «»
By: Pierre-Charles David
Re: Sirius Web UML Sequence Diagram
Hi.
Thanks for your interest in Sirius Web.
We currently focus on improving support for generic/classical diagrams, and supporting sequence diagrams is not on the roadmap at the moment.
It could certainly happen in the future, but it is a complex fe...
|
| 38 |
Forum: Papyrus for Real Time «»
Posted on: Tue, 25 May 2021 18:21 «»
By: Ernesto Posse
Re: Xtext in Papyrus RT RCP
I'm not sure how you are replying to the messages, but in the forum your messages appear only as "No Message Body". I only see your messages on e-mail. Perhaps you are using some formatting? I'd suggest setting HTML to off in your Eclipse Forum ...
|
| 39 |
Forum: C / C++ IDE (CDT) «»
Posted on: Tue, 27 April 2021 09:45 «»
By: sreedhar Kaduru
Cortex M7 CPU register
Hello,
I am working on CortexM7 core while Cortex M7 debugging below data i am getting.
PC counter values are reading wrongly.
SEGGER J-Link GDB Server V7.00a Command Line Version
JLinkARM.dll V7.00a (DLL compiled Apr 16 2021 15:32:47)
Comma...
|
| 40 |
Forum: Mosquitto «»
Posted on: Wed, 14 April 2021 07:14 «»
By: leo thomas
Change localhost address Mosquitto (windows)
Hello everyone,
I work with mosquitto for deploy MQTT Broker.
I install mosquitto on my computer (windows 10).
When i test my broker with MQTT Explorer or MQTT FX i using localhost address (127.0.0.1).
I would like to know how to use my internal ...
|
| 41 |
Forum: Eclipse Titan «»
Posted on: Wed, 07 April 2021 08:56 «»
By: Lenard Nagy
Eclipse Titan repositories will migrate to GitLab
Dear Eclipse Titan Community,
As part of the Eclipse git repository migration to GitLab the Eclipse Titan repositories from GitHub and Eclipse Git will move to a common git storage place under Eclipse GitLab (https://gitlab.eclipse.org). We have 137 rep...
|
| 42 |
Forum: Mosquitto «»
Posted on: Wed, 17 March 2021 11:47 «»
By: Simon Christmann
Mosquitto Plugin
I'm trying to get the ID and Username of the client who published a message via MQTT.
As a first step, I wanted to implement a simple printf-plugin based on https://github.com/eclipse/mosquitto/blob/master/plugins/payload-modification/mosquitto_payload_...
|
| 43 |
Forum: Mosquitto «»
Posted on: Mon, 22 February 2021 18:23 «»
By: ashton partridge
New Mosquitto install - not talking outside of localhost
Hi Everyone
Thanks in advance for your help.
I am desperately trying to get the MQTT mosquito broker running on my win10 pro PC. I have googles and looked in this forum but have not come across anything that has solved the issue. I have successfully...
|
| 44 |
Forum: EMF «»
Posted on: Thu, 11 February 2021 15:35 «»
By: Xavier GISTAU
[CDO] Basic use of CDO programmatically
Hello everyone,
I am fairly new to CDO, and I am trying to get familiar with it. I have followed a tutorial on how to install all the plugins and packages to use CDO with my first EMF model and everything went great !
The tutorial : https://wiki.ecl...
|
| 45 |
Forum: Java Development Tools (JDT) «»
Posted on: Fri, 29 January 2021 18:04 «»
By: Jim Anderson
Re: Eclipse Project for a Java Package?
Status:
I ordered a book for Java 9+ and will work my way through. In the meantime, I have back tracked to Jave 1.8 so that I can keep my project moving forward. I hope to be done in the early spring and I don't want to use my time now to address Java...
|
| 46 |
Forum: Java Development Tools (JDT) «»
Posted on: Tue, 22 December 2020 10:05 «»
By: Ed Willink
Re: Can't start IDE anymore - perhaps due to recent update?
Hi
Personally, I never use updates and so am guilty as a developer who doesn't test whether my projects are updatable or contribute to the overall utility. I see too much confusion and doubt and users with problems. P2 certainly has trouble if any of yo...
|
| 47 |
Forum: Oomph «»
Posted on: Wed, 16 December 2020 19:41 «»
By: Claudio Weiler
Re: Correctly share Eclipse Product Setup
Thanks Ed!
When I do "Refresh Remote Cache" I can see a progress task with git address to de Eclipse Product Setup.
My eclipse install is 2020-09, could be without this changes to "Perform Setup Tasks"?
It's possible to manuall...
|
| 48 |
Forum: C / C++ IDE (CDT) «»
Posted on: Fri, 27 November 2020 11:23 «»
By: Tauno Voipio
Re: Best C++ IDE and Compiler?
Google for MinGW and MSYS, read the instructions and install the software. In a similar way, you can Google for 'MinGW Emacs' and get info for Emacs in your system.
After doing it, there are instructions for Eclipse CDT (C Development Toolkit) in the Ec...
|
| 49 |
Forum: Kura «»
Posted on: Tue, 10 November 2020 05:05 «»
By: sanif m
Kura unset emulator
2020-11-09T23:02:47,623 [Start Level: Equinox Container: 70a2bae5-4f78-4fac-b44c-769902787e41] INFO o.a.c.i.o.Activator - Camel activator starting
2020-11-09T23:02:47,640 [Start Level: Equinox Container: 70a2bae5-4f78-4fac-b44c-769902787e41] INFO o.a.c....
|
| 50 |
Forum: C / C++ IDE (CDT) «»
Posted on: Mon, 09 November 2020 23:01 «»
By: Michael Petch
Re: Assembly: Build Error: 'Hello World'
There are a few issues here. You are attempting to create a 64-bit executable. The first issue is that the assembly code you have created is NOT position independent code (PIC). This is because the instruction mov $message, %ecx is not position independent...
|
| 51 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Wed, 04 November 2020 17:25 «»
By: Alois Zoitl
Re: MQTT - NO Socket issue
I think it would definitely good if you familiarize yourself with MQTT. MQTT is a broker based system where your publish and subdscribes go to a dedicated broker. 4diac FORTE has currently the limitation that within one 4diac FORTE instance you can connect...
|
| 52 |
Forum: Eclipse Web Tools Platform Project (WTP) «»
Posted on: Fri, 16 October 2020 08:30 «»
By: Nitin Dahyabhai
Re: key bindings warnings
Please open a bug report for this against JSDT. We'll try to address it in the next release.
|
| 53 |
Forum: TMF (Xtext) «»
Posted on: Tue, 13 October 2020 15:36 «»
By: Benny Katchy
Path Expression Issue
I am working on a grammar that involves navigating an object graph in my custom expression language. The issue is that i keep getting this error in my scope provider
org.eclipse.xtext.linking.lazy.LazyLinkingResource$CyclicLinkingException: Cyclic resolut...
|
| 54 |
Forum: Jobs and employment «»
Posted on: Fri, 04 September 2020 18:17 «»
By: Ed Merks
Re: Looking for Eclipse plug-in developer (Part-time job)
People can't really ping unless you provide a contact. Your email address should be included in your post because the forum hides it. E.g., provide it in the form of "ed.merks at gmail.com". Of course I personally know lots about EMF. :-P ...
|
| 55 |
Forum: Eclipse Scout «»
Posted on: Wed, 19 August 2020 06:29 «»
By: Beat Schwarzentrub
Re: Blank login form
Have you encountered this issue before?
This can happen when the login.js file cannot be found. In this case, Jetty (or Tomcat, or whatever app sever you are using) returns a HTTP 404 status along a human readable HTML page. You can verify this by e...
|
| 56 |
Forum: Java Development Tools (JDT) «»
Posted on: Mon, 17 August 2020 23:59 «»
By: Bruno Melloni
Re: Classloader woes after leaving Java 8.
UPDATE:
1) The approach you kindly proposed worked for me with vanilla java but it breaks when loading a Spring context.xml.
2) I even customized ClassPathXmlApplicationContext() to try to force Spring to use my classloader when loading the con...
|
| 57 |
Forum: Mosquitto «»
Posted on: Thu, 30 July 2020 10:14 «»
By: Cyno Sure
ESP8266 not able to connect local mosquitto broker
I can connect ESP8266 to test.mosquitto.org. Pub/Sub all works.
But while using the same ESP8266 to connect my local mosquitto broker, it just does not establish connection with the local broker. (I actually tried several local mosquito brokers and non...
|
| 58 |
Forum: Eclipse Titan «»
Posted on: Thu, 16 July 2020 15:56 «»
By: Elemer Lelik
Re: Debugging using Titan Debugger
Hi Mujeeb,
as you might already know, a Titan executable can run in single mode (on one component only , that component being the MTC) , or in parallel mode (MTC plus a number of PTCs-parallel test components).
I will expand the example on the sing...
|
| 59 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Thu, 16 July 2020 02:40 «»
By: NOJA Power
Date and Time Function Blocks
Hi,
I downloaded the latest forte source and looked around in the function block modules but I didn't see anything in there for accessing system date and time information.
I'm wondering if you think it might be worth while adding some function blocks...
|
| 60 |
Forum: Paho «»
Posted on: Sat, 04 July 2020 00:00 «»
By: Gary Marks
Re: TLS Certificate Verify Failure in paho-mqtt implementation
Thank you for your on-going patience on this issue. However, I should point out that the "client.tls_insecure_set(True)" fix actually only worked on one of my clients. Recall the mosquitto server is running on a raspberry pi 3b. My raspberry pi 3...
|
| 61 |
Forum: Eclipse Titan «»
Posted on: Thu, 18 June 2020 14:21 «»
By: Michael Josenhans
Re: Decoding J1939 name fails
Is there now a way to reverse the order of the bytes in the J1939_NAME_RECORD for encoding. (The lowest byte is encoded first, the highest byte is encoded last.)
As seen here:
See https://www.kvaser.com/about-can/higher-layer-protocols/j1939-introduc...
|
| 62 |
Forum: Memory Analyzer «»
Posted on: Thu, 18 June 2020 12:56 «»
By: G Xu
Auto launch an user defined query
Currently, MAT has the ability to auto launch the leak suspect query, I am wondering if there is a way to define my own.
We use MAT not only to address memory issue, but also at times, we'd like to have the process information available right after ...
|
| 63 |
Forum: Eclipse Scout «»
Posted on: Tue, 02 June 2020 15:02 «»
By: Darth Bolek
Re: Cache example
Victory lap?
I really want to avoid re-implementation of BasicCache, and that is with assumption that CacheBuilder.withAdditionalCustomWrapper() works the way I think it is working. If not that would mean re-implementation of CacheBuilder too...
And ...
|
| 64 |
Forum: Eclipse Titan «»
Posted on: Thu, 07 May 2020 09:19 «»
By: Kristof Szabados
Re: How to generate java file from command line through ttcn test cases.
Hi Ganesh,
Please note that the Java code generator is still in prototype phase, for now the supported way of compilation with Titan is still going through the C/C++ compilation, which is working from the command line.
Right now the development of th...
|
| 65 |
Forum: EGit / JGit «»
Posted on: Tue, 05 May 2020 07:29 «»
By: Thomas Wolf
Re: egit clone throws exception
No problem. If it re-occurs and you do have a trace, you could send it via private e-mail to me (my e-mail address is on my commits in the EGit and JGit repositories), or put it on some file share site and tell me how to get it. The trace is likely to cont...
|
| 66 |
Forum: Newcomers «»
Posted on: Fri, 17 April 2020 14:25 «»
By: VIVEK SOMANI
Re: Eclipse Error
While installing Eclipse on my machine having Windows 10 and jdk 14, I am getting an error, i need help ,
[2020-04-17 19:48:51] Executing bootstrap tasks
[2020-04-17 19:48:51] Java(TM) SE Runtime Environment 14+36-1461
[2020-04-17 19:48:51] Product org...
|
| 67 |
Forum: Papyrus «»
Posted on: Fri, 20 March 2020 20:56 «»
By: Philip Langer
Re: Is Papyrus Compare still alive?
Hi again,
I've now updated the dependencies of Papyrus Compare to address the Guava version conflict and fixed the build. After a bit of tweaking the tests are now all green and a new nightly build is available at the update site:
https://download.ecli...
|
| 68 |
Forum: Newcomers «»
Posted on: Fri, 20 March 2020 03:53 «»
By: Q M
Viewing session is not available or expired : BIRT Server
I am trying to open BIRT's report using DNS / Hostname :9090 in Google Chrome . I am getting the error Viewing session is not available or expired
Good news is I am able to view the report using IP Address:9090 but not using the DNS/HostName:9090.
H...
|
| 69 |
Forum: C / C++ IDE (CDT) «»
Posted on: Sat, 29 February 2020 15:56 «»
By: Nick Schweyer
Re: Eclipse C/C++ CDT (Pointer alignment for Typecasting)
I am not an expert in C/C++ but will try to give an answer or at least a point for discussion.
A pointer is a pointer to a variable, in this case a variable of type uint64_t. The compiler/linker will know where the variable is located and generate the...
|
| 70 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Wed, 29 January 2020 13:50 «»
By: Ahsan Zia
Re: 4Diac-Arrowhead framework
Hi,
Thank you. Looks like I am going in the right direction.
What should be the entries of the fields?
Using (IP:PORT/serviceregistry/mgmt/id) as address. The id is 22. primarily, using POSTMAN to register the services.
Registering the end po...
|
| 71 |
Forum: Capella Studio «»
Posted on: Wed, 22 January 2020 09:34 «»
By: Jean Albrieux
Git adress
Hello everybody,
I was using the following git adress to reach the sources:
git.polarsys.org/c/capella.git
But since a few days it is written "no repositories found".
As the forum has been moved recently, is it the same for the git reposit...
|
| 72 |
Forum: Newcomers «»
Posted on: Sat, 04 January 2020 20:01 «»
By: Anthony Heak
Can't debug startup code Reset_Handler
Hi, maybe somebody can help me with this. I am trying to debug the startup code for my kl25z freedom board. I set a breakpoint at Reset_Handler label which is in file startup_MKL25Z4.S
I am using GDB PEMicro Interface Debugging plugin. In the eclips...
|
| 73 |
Forum: Newcomers «»
Posted on: Thu, 05 December 2019 08:43 «»
By: Ed Merks
Re: 'Updating Software' has encountered a problem.
Yes, your comments on this thread is baseless because this thread is about a DNS error yet the bug you point at (related to there being no corresponding artifact found) is something that I've already explain can and does happen when the server delivers a n...
|
| 74 |
Forum: Papyrus «»
Posted on: Mon, 02 December 2019 12:34 «»
By: Carsten Pitz
Re: Papyrus Chess
Hi Pauline,
Many thanks for your promt answer.
Ups, well, it is (or was) a PolarSys project, not a Papyrus derivative. But the project seems to be dead. At least the newsgroup's email address is no longer routed.
I'll ask Charles Rivet what happe...
|
| 75 |
Forum: Mosquitto «»
Posted on: Fri, 22 November 2019 11:14 «»
By: Cesar Jorge Martínez
Re: Mosquitto RPMs for RedHat and Centos 6 and 7 missing
Hi Roger,
But, in the page Eclipse: https://www.eclipse.org/mosquitto/download/
If you click in these links, appears resource not available.
"""
CentOS
The mosquitto project provides rpms for CentOS through the openSUSE build servic...
|
| 76 |
Forum: C / C++ IDE (CDT) «»
Posted on: Tue, 29 October 2019 07:15 «»
By: David Vavra
Re: Compiler Failing on non-errors
This really isn't the proper forum for this.
This forum is to address issues with CDT.
You obviously have something wrong in Matrix.h
which has nothing to do with Eclipse CDT.
You're essentially asking us to fix your code.
There may be something (...
|
| 77 |
Forum: EclipseLink «»
Posted on: Tue, 29 October 2019 01:47 «»
By: Chris Delahunt
Re: "Bug" with JPA InheritanceType SINGLE_TABLE and key
You would have to show how you've mapped your primary key, but it seems like you might have only specified the ADDRESS_KEY as the ID for the hierarchy.
Having the Type be part of a composite primary key is not usual - all your foreign keys to that tab...
|
| 78 |
Forum: C / C++ IDE (CDT) «»
Posted on: Tue, 01 October 2019 06:23 «»
By: Vishakha Dakhane
Failed to execute MI command
I am new to eclipse and working on lpc1769 controller and using segger EDU for debugging. I am able to build the code in eclipse with ARM toolchain but not able to debug the code. I referred the github site #create-the-debugger-launch-configuration to set ...
|
| 79 |
Forum: TMF (Xtext) «»
Posted on: Fri, 13 September 2019 07:24 «»
By: Markus Häge
Re: var dependent on other var
Hi,
auto edit is a nice way but seems to work just in Eclipse.
For editing, i need all parameters, DAC and ADDRESS and actually some more, and I want to prevent wrong addresses. Address has to be in a certain space which is reserved. So a given value i...
|
| 80 |
Forum: TMF (Xtext) «»
Posted on: Thu, 12 September 2019 13:59 «»
By: Ed Willink
Re: var dependent on other var
Hi
Are you sure you really want the Address to be entered at all? It just seems to require your user to work harder and to have an opportunity to enter redundant values wrongly.
If you need it in the model, then enrich your Ecore model with a derived...
|
| 81 |
Forum: Paho «»
Posted on: Thu, 05 September 2019 07:41 «»
By: gopal korrapati
Encryption/Decryption
Hi all,
Last one week onwads am struggling to find the Encryption and Decryption api's in paho mqtt c code. I took default MQTTClient_publish.c code, the below code
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#inc...
|
| 82 |
Forum: Jubula «»
Posted on: Wed, 10 July 2019 14:28 «»
By: Martin Mulholland
Cannot start AutAgent on MAC
I am evaluating Jubula to use for testing an eclipse plugin. The plugin runs as part of the eclipse IDE so my AUT is effectively the eclipse IDE with the plugin installed.
I am evaluating on MacOS 10.14.5, java version "1.8.0_144"
Have man...
|
| 83 |
Forum: Papyrus «»
Posted on: Mon, 08 July 2019 08:42 «»
By: Quentin Le Menez
Re: How to build an environment that compiles source code
Hi Chao,
It's been a task I have to finalize to update the oomph setup of Papyrus (should be up and running soon-ish with the several latest released versions).
There are two ways (just in case one does not pan out for you) to do what you want to do:...
|
| 84 |
Forum: Java Development Tools (JDT) «»
Posted on: Fri, 28 June 2019 18:22 «»
By: Ed Merks
Re: Unable to update to latest plugins, due to JDT plugin problem
If you had an Oomph setup, I would spend the hour to figure out what's wrong. Thought I'd probably only need to spend five minutes. I'd do that to figure out if there's really something wrong that JDT could actually address or if you've just installed oth...
|
| 85 |
Forum: Papyrus «»
Posted on: Tue, 28 May 2019 15:32 «»
By: Yiliang YIN
Re: applied stereotypes doesn't show up after applying a registered profile
Thank you for your reply, I've found the problem, there's an error in the help guide which adds a superfluous "/" at the end for the location property of org.eclipse.uml2.uml.generated_package extension. Now there's no problem for me to apply the...
|
| 86 |
Forum: C / C++ IDE (CDT) «»
Posted on: Fri, 24 May 2019 02:19 «»
By: David Vavra
Re: Best C++ IDE and Compiler?
The question is far from simple.
There is no such thing as 'best' without knowing your needs.
This is true not only for computer programming but in all aspects of life.
What's the best vehicle to own: a sedan, a pickup or a step van?
The answer depends...
|
| 87 |
Forum: Jubula «»
Posted on: Mon, 13 May 2019 12:29 «»
By: Mike Bray
Re: Selecting javafx tableview row
Thank you for the reply. I found it by trial and error and am now trying out various tests. Unfortunately my app has HBox and VBox panes within cells that contain multiple fields. I would like to specifically address those fields but I will see what I c...
|
| 88 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Mon, 22 April 2019 17:51 «»
By: abc xyz
Re: Error with TCP/IP example
Hello dear Alois,
In my case, it says "NO SOCKET". can you please have a look at the attached picture. Where 192.168.0.101 is the ip address of device at which server is running and client is at localhost PC.
Thanks for your comments. The pub...
|
| 89 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Mon, 15 April 2019 06:49 «»
By: Jose Maria Jesus Cabral Lassalle
Re: Lego Ports couldn't be read
what's the content of /sys/class/tacho-motor/motor0/address and /sys/class/tacho-motor/motor1/address?
$ cat /sys/class/tacho-motor/motor0/address
$ cat /sys/class/tacho-motor/motor1/address
|
| 90 |
Forum: EGit / JGit «»
Posted on: Fri, 22 March 2019 12:25 «»
By: Axel Guckelsberger
Can't get signing to work
Hello,
I wanted to utilise the new functionality for signing commits.
Configured user.signingKey and set commit.gpgSign to true.
Everything works on the command line:
git commit -a -m "My change" && git push
This asks for my ...
|
| 91 |
Forum: Eclipse Titan «»
Posted on: Thu, 21 February 2019 11:28 «»
By: Elemer Lelik
Re: PTCs on different machines
Hi Olaf, sure thing;
start the main controller on Host1 with IPAddress1
./mctr_cli ConfigurationFile.cfg
The configuration file may contain some parameters relevant to the main controller , e.g. TCP port to be used for MTC-PTC communicat...
|
| 92 |
Forum: Target Communication Framework «»
Posted on: Mon, 18 February 2019 16:58 «»
By: Brett Bergquist
Re: Debugger hang on _dl_debug_state on linux/i.MX7
I built with your change and it is working. I was wondering about other breakpoint targets that might be in Thumb mode, for example if I have a function that is has been compiled to a Thumb address (ie 1 in the least significant bit) and I set a function ...
|
| 93 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Mon, 04 February 2019 09:30 «»
By: Jonas Helming
Re: [EMF Forms] ViewModel, FeaturePath and Table controls
Hi,
about 1):
Let us assume you have User containing an Address and you create a view model for User. Click on "generate Controls", select the containment reference "address" of user and the Address. Now you should be able to add co...
|
| 94 |
Forum: Mosquitto «»
Posted on: Thu, 17 January 2019 22:02 «»
By: Jean-Philippe BRUNET
Mosquito does not start when any ip interface is down
Mosquitto does not start if any of ip interfaces in configuration file is down.
I have a basic configuration with two interface, a local interface, and a vpn interface wich is not necessary up
If I comment listener VPN interface mosquitto always start...
|
| 95 |
Forum: Target Communication Framework «»
Posted on: Fri, 11 January 2019 15:36 «»
By: Brett Bergquist
Debugger hang on _dl_debug_state on linux/i.MX7
I am having a tcf-agent/eclipse Target Communication Framework debug session hang when loading shared library. The target is embedded linux on an i.MX7 processor.
Many of the other shared libraries are loaded correctly but this one hangs. Suspending ...
|
| 96 |
Forum: Mosquitto «»
Posted on: Fri, 30 November 2018 12:47 «»
By: Miguel Costa
Mosquitto not running in Windows Server 2012 R2
Greetings.
I'm using MQTT, coupled with Mosquitto, in a workproject. It works out perfectly after the installation in Windows 7. However, after trying to install Mosquitto in a remote Windows Server 2012 R2, Mosquitto does not run at all. It does not ru...
|
| 97 |
Forum: C / C++ IDE (CDT) «»
Posted on: Thu, 15 November 2018 23:06 «»
By: Frédéric Cordier
Re: AmigaOS4 includes files uncorrectly handled
Here is the library file that own these errors :
#ifndef EXEC_INTERFACE_DEF_H
#define EXEC_INTERFACE_DEF_H
/*
** This file was machine generated by idltool 52.6.
** Do not edit
*/
#ifndef EXEC_TYPES_H
#include <exec/types.h>
#endif
#...
|
| 98 |
Forum: Kura «»
Posted on: Mon, 12 November 2018 13:37 «»
By: Thomas Hornstein
Kura behind Proxy
Hello,
im in a network with local proxy for outgoing connections.... is there a way to enter the address of this proxy somewhere in kura?
Kura is running on raspberry pi 3 model b.
defining proxy in terminal with:
export https_proxy="https:...
|
| 99 |
Forum: Eclipse Titan «»
Posted on: Thu, 01 November 2018 20:29 «»
By: David Laurent
L2 and L3 Network support TTCN
Hi Elemer,
Would you know if work was done on L2/L3 inTTCN ?
Specifically on L2 Address Caching and Address Learning ?
Regards - David
|
| 100 |
Forum: Eclipse Titan «»
Posted on: Fri, 19 October 2018 12:42 «»
By: David Laurent
Re: Translation ports vs dual-faced ports part2
Hi Elemer,
1. For both translation and dual port, the wireshark now shows the echo_reply after we switch the floating ip address to internal one, however TTCN does not decode the received message.....this is what we are investigating...Thx for your sup...
|
| 101 |
Forum: Eclipse Titan «»
Posted on: Thu, 18 October 2018 16:26 «»
By: David Laurent
Re: Translation ports vs dual-faced ports part2
Hi Elemer,
We already tried with real ip and mac address without much success
Would the compiler version stop us from receiving the echo_reply ?
This is our version:
ttcn3-6.3.pl0-linux64-gcc5.4-ubuntu16.04.tgz
Should we get this version to ali...
|
| 102 |
Forum: Eclipse Titan «»
Posted on: Sat, 13 October 2018 06:35 «»
By: Elemer Lelik
Re: How to execute test cases with Linux command line
Hi le tian,
there are two ways to start a parallel execution from the command line;
let's assume that you have built with Titan an executable binary myExecutableBinary
and you have a configuration file ConfigurationFile.cfg
I will assume that enviro...
|
| 103 |
Forum: Newcomers «»
Posted on: Wed, 12 September 2018 07:59 «»
By: Ori Marko
decompiler blocked by antivirus
I have Eclipse Neon,
When opening my eclipse I get a warning from my antivirus that it has blocked address decompiler.chenchao.tk
The address seems to be a part of Eclipse Class Decompiler
Is it a real issue or is it a "false positive" i...
|
| 104 |
Forum: Sirius «»
Posted on: Wed, 05 September 2018 06:49 «»
By: Prajna VG
Re: Problem in creating edge
Hi Pierre,
Thanks for replying..!!
There is no direct relation. I mean there is only pages reference(for page class). No adresses reference. Address is subclass of page. So it is getting difficult to create an edge. Then we can not do in that meta ...
|
| 105 |
Forum: EclipseLink «»
Posted on: Thu, 16 August 2018 16:52 «»
By: I P
Cache L2 sharing objects with managed entities
Hello guys,
Having the following structure:
Entity A -> includes an embedded component Address
L2 cache enabled, FULL type, the default one from EclipseLink
During a transaction, before commit time, if we modify the embedded component from a m...
|
| 106 |
Forum: Kura «»
Posted on: Mon, 23 July 2018 10:30 «»
By: shubh wade
BH1705 Sensor.
I2CDeviceConfig config = new I2CDeviceConfig(
I2CDeviceConfig.DEFAULT, //I2C bus index
0x23, //I2C device address
I2CDeviceConfig.ADDR_SIZE_7, //Number of bits i...
|
| 107 |
Forum: EMF «»
Posted on: Fri, 20 July 2018 12:35 «»
By: Parsa Pourali
Re: Rollback to a previous state of the model
Hi Ed.,
Thanks a lot for your beautiful explanation. I just have a few questions on copying:
1) The actual resource is an XText resource. I don't think that makes any difference in my case, right?
2) should I use ecoreutils.copy to copy or there is...
|
| 108 |
Forum: Eclipse Kapua «»
Posted on: Thu, 12 July 2018 14:05 «»
By: Mohab Aly
Kura doesn't work properly on Raspberry Pi
Description of the issue I am encountering in Kura:
Every time when trying to connect to Kura via Raspberry pi "after following the tutorial steps", internal error occurs!.
Textual description of the issue:
- Component affected:
- [ ] ...
|
| 109 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Thu, 21 June 2018 16:18 «»
By: Alois Zoitl
Re: Forte Runtime for a PLC
The process for Raspi is the same as for the local blinky tutorial. The differences are that instead of compiling FORTE for windows you need to crosscompile it. Instead of running on your pc the resulting forte.exe you need to put the forte executable on y...
|
| 110 |
Forum: Newcomers «»
Posted on: Thu, 21 June 2018 15:34 «»
By: linghui wu
Where is the offline document being loaded
For beginners, please tell me where the offline document is being loaded.
Give me the Address or procedure.
thinks.
|
| 111 |
Forum: Papyrus «»
Posted on: Thu, 26 April 2018 12:10 «»
By: Christian Damus
Re: Sequence Diagram and Combined Fragment
Hi, Yoann,
There is currently activity on fixes and improvements in the editing of combined fragments, targeting Photon but I think also the Oxygen.4 release (as indicated in the wiki; at least a few bug fixes have already been back-ported to Oxygen). ...
|
| 112 |
Forum: Kura «»
Posted on: Tue, 24 April 2018 11:58 «»
By: Antony George
Re: Issue with kura installation on Raspberry Pi 2
pi@raspberrypi:~ $ sudo netstat -tulpn
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 127.0.0.1:53 0.0.0.0:* LI...
|
| 113 |
Forum: Oomph «»
Posted on: Thu, 22 March 2018 16:26 «»
By: Ed Merks
Re: [NEED HELP] An internal error occurred during: "JavaEditorMessages.SemanticHighlighting_job
It would be important to see the stack trace involved in this. You'd get that by double clicking the error message. But this isn't really a question to address to the Oomph forum. More likely it should be address to the folks that providing this Yang ...
|
| 114 |
Forum: Eclipse Titan «»
Posted on: Wed, 21 March 2018 21:34 «»
By: Andre Puschmann
Re: Encoding function for 3GPP RLC/PDCP PDUs
Hi all,
in order to interface the EUTRA_PTC with my DUT I've created a dual-faced port that converts, for example, the SYSTEM_CTRL_REQ and SYSTEM_CTRL_CNF messages, and transmits/receives them over UDP using the IPL4 port. Part of the (incomplete) port ...
|
| 115 |
Forum: Oomph «»
Posted on: Wed, 21 February 2018 04:43 «»
By: Ed Merks
Re: switching target platform version
The projects themselves must support a setup description for older versions of their code. And there are of course two issues involved. Which versions of which tools are actually installed in the IDE and which versions of which features and bundles are ...
|
| 116 |
Forum: TMF (Xtext) «»
Posted on: Tue, 20 February 2018 09:33 «»
By: Giray Ozel
Using indent for more than one level of indentation
I have the following grammar:
Department:
'Department:' name = ID
'Company:' companyName = STRING
'Persons:' persons += Person+
;
Person:
firstName = STRING
':'
surname = STRING
':'
address = STRING
;
And I would like...
|
| 117 |
Forum: Eclipse Foundation «»
Posted on: Mon, 08 January 2018 16:59 «»
By: Eclipse Webmaster
Re: Update account email
It is mailing the current address associated with the account in order to prevent your account from being 'hi-jacked'.
There are 2 options here:
1) Create a new account using your new email address.
2) If you know a currently active committer on a...
|
| 118 |
Forum: Eclipse Foundation «»
Posted on: Fri, 05 January 2018 13:56 «»
By: Luc des Trois Maisons
Update account email
Hi,
I am having trouble updating my account email. I have moved organisations and am trying to update my profile such that my account email and CLA status accurately reflect my current copyright situation. Every time I attempt to update my email I am ...
|
| 119 |
Forum: BIRT «»
Posted on: Thu, 09 November 2017 11:53 «»
By: Riccardo Capritta
Library masterpage only on the first page
Hello guys,
I have a big problem with BIRT. I have a library with a master page. On this master page is my HEADER with e. g. logo, address, headline. etc.
I added this master page to my report. The problem is now that I only want to have the header on th...
|
| 120 |
Forum: Sirius «»
Posted on: Wed, 08 November 2017 14:06 «»
By: Pierre-Charles David
Re: Sirius on the Web
Hi,
Not yet. There are "workarounds" like https://github.com/neilmackenzie/jbds-via-html5, which execute Sirius as-is and export its UI via the VNC-like protocol, which can then be accessed from any browser.
As Cédric mentioned, it's a rela...
|
| 121 |
Forum: Epsilon «»
Posted on: Wed, 20 September 2017 21:08 «»
By: Mojtaba Bagherzadeh
Sharing UML-RT transformation scripts
I would like to thank the Epsilon developers for their great tool. As part of my Ph.D. project, I have used the Epsilon to develop a model-level debugger for Papyrus-RT. While I was a new to the modeling tools, I could use Epsilon easily, and my few quest...
|
| 122 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Wed, 20 September 2017 07:38 «»
By: Alois Zoitl
Re: improvement of usability
Thanks for this report. I was lucky to get a sneak preview on your work. So seeing this report publicly is really helpful for the 4diac project. There are lot of interesting points to be considered for the future development of 4diac and some have been alr...
|
| 123 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Wed, 16 August 2017 09:35 «»
By: Stefan Profanter
Re: Setting ID of Client Modul in 4DIAC
Hi,
your ID is simply wrong, that's not a valid browse path and it does not align with the correct format.
Please read the documentation (https://eclipse.org/4diac/en_help.php).
There is written for example:
To configure where the variable nodes ar...
|
| 124 |
Forum: Paho «»
Posted on: Tue, 15 August 2017 07:40 «»
By: Mohammed Ubaid
Unable to authenticate bluemix connection
Hello all,
I am using the eclipse paho mqtt c library to connect to bluemix. Have done my part on the bluemix cloud and created an IoT device and registered the same, have generated API keys.
I am writing my raspberry pi cpu temperature on bluemix c...
|
| 125 |
Forum: Epsilon «»
Posted on: Wed, 19 July 2017 16:22 «»
By: Banafsheh Azizi
get the address of input
Hi,
How can I get the addresses of input model and input metamodel in eol program?
I want to pass these addresses to java.
|
| 126 |
Forum: e(fx)clipse «»
Posted on: Wed, 19 July 2017 11:56 «»
By: Thomas Schindl
Re: Isn't it time to create a reference e(fx)clipse project from scratch?
The reason I did not reply yet is that I wanted to wait until I can provide news and provide a first starting point for a end-to-end sample but it looks like it will take some more days. So for reference I hear you and I plan to actively address this very ...
|
| 127 |
Forum: Eclipse Titan «»
Posted on: Fri, 23 June 2017 12:05 «»
By: Elemer Lelik
Re: How to convert WSDL/SOAP into TTCN-3
Hi Yann,
please be aware that since I posted the article the address of the service has changed to:
https://www.w3schools.com/xml/tempconvert.asmx
with WSDL at :
https://www.w3schools.com/xml/tempconvert.asmx?WSDL
There might have been c...
|
| 128 |
Forum: C / C++ IDE (CDT) «»
Posted on: Thu, 22 June 2017 09:19 «»
By: Xander Borre
Remote debugging not starting properly
Hi everyone,
I got a problem for some months now. I use Eclipse (Neon2/3 also Oxygen) with gnueabihf crosscompiler. I am connecting from eclipse over ssh to my beaglebones. I can succesfully run my programms on the beaglebone but I can't get the debugge...
|
| 129 |
Forum: Eclipse Titan «»
Posted on: Thu, 11 May 2017 09:47 «»
By: Elemer Lelik
Translation ports vs dual-faced ports part1
Dear all,
We have discussed at length the reasons to use dual-faced ports, for example here:
Dual-faced test ports: architectural considerations
https://www.eclipse.org/forums/index.php/t/1078877/
Dual faced ports are an early implementation ...
|
| 130 |
Forum: OCL «»
Posted on: Wed, 10 May 2017 21:50 «»
By: Ed Willink
Re: UML constraints context
Hi
Very short answer: What you ask is not defined by the UML or OCL specifications.
There was a long discussion in http://issues.omg.org/browse/UMLR-707
Rather than just regurgitate my ingrained/prejuduced point of view I reread Clause 12 of the O...
|
| 131 |
Forum: TMF (Xtext) «»
Posted on: Wed, 05 April 2017 20:04 «»
By: Daniel Cardin
Re: Scoping a feature call
OK. Status report
The XAssignment doesn't work at all, it assume a million things about the rule.
For once, I really properly understood the scoping. So this is how I did it:
Assignment returns xbase::XExpression:
{Assignment}
'set' feature=[...
|
| 132 |
Forum: Kura «»
Posted on: Wed, 05 April 2017 17:57 «»
By: David Woodard
Re: Problem installing Kura 1.2.1
Hello,
The easiest way is to browse to the IP address of the unit where Kura is installed. For most platforms, this is hosted on port 80. If you are using the Intel Edison distribution, the port will be 8080.
You can also login to the OSGi console an...
|
| 133 |
Forum: Andmore «»
Posted on: Wed, 15 March 2017 12:09 «»
By: Didier Leibovici
wrong omacosx neon address from jBPM ant install
Hi,
trying to install eclipse from the jBPM ant install (ant install.demo)
I had an error when downloading eclipe using the following address
[echo] Getting Eclipse ...
[get] Getting: http://download.eclipse.org/technology/epp/downloads/release/...
|
| 134 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Wed, 15 March 2017 11:06 «»
By: Adrian Orive
Re: mqtt
I will ask here to keep the forum tidy, but if you think this should be a separate post, split it or let me know so I can do it myself.
I was trying to communicate over MQTT (for that, I compiled Paho MQTT C library and added the following command line ...
|
| 135 |
Forum: EMF «»
Posted on: Sat, 18 February 2017 06:41 «»
By: Banafsheh Azizi
get name/address of model
Hi,
How can I get the name/address of input model (IN1) in ATL?
|
| 136 |
Forum: ATL «»
Posted on: Fri, 17 February 2017 20:56 «»
By: Banafsheh Azizi
Re: Access the metamodel name and address through code
Do you know how can I get the name/address of input model (IN1)?
|
| 137 |
Forum: ATL «»
Posted on: Wed, 25 January 2017 06:38 «»
By: Banafsheh Azizi
Access the metamodel name and address through code
How can I get input metamodel name and address from the code below (IN1)?
create OUT : MM_Out from IN1 : IN_MM, IN2 : IN_MM2;
|
| 138 |
Forum: Standard Widget Toolkit (SWT) «»
Posted on: Sun, 22 January 2017 21:44 «»
By: Alain Picard
Re: Issue with Visio Viewer
I've made a number of additional attempts and I hope that some extra details might help someone provide some insight.
As stated, I had 2 problems, getting the viewer to get the focus and respond to event and the resizing.
In googling I found out that...
|
| 139 |
Forum: Paho «»
Posted on: Wed, 28 December 2016 20:21 «»
By: Guy Dillen
MQTTClient_create(...) C lib problem
Hello,
I have some strange behavior. I use the example C code as in https://eclipse.org/paho/clients/c/. It worked before, but now it builds fine but when running I get an exit value -1.073.741.515! Even a simple printf() statement (for debug purposes)...
|
| 140 |
Forum: EMF «»
Posted on: Wed, 21 December 2016 15:47 «»
By: Ioan Salau
Re: [EMF] Reusable Annotations
Thanks Ed&Felix for your quick feedback. I am using KDM model instances (Knowledge Discovery Model from OMG ) which has Annotation and Tag class defined, but I guess your suggestions works as KDM and Annotations/Tags works similar with Ecore and EAnnot...
|
| 141 |
Forum: EclipseLink «»
Posted on: Mon, 05 December 2016 07:03 «»
By: Nuno Godinho de Matos
Re: How to get Eclipselink to fire JSR303 constraints in mapped super class?
Hi,
I believe that this issue is of fundamental importance and it still manifests in eclipselink version 2.6.4.
If you see the stack overflow issue under:
http://stackoverflow.com/questions/37310853/how-to-get-eclipselink-to-fire-jsr303-constraints-...
|
| 142 |
Forum: OM2M «»
Posted on: Sat, 03 December 2016 00:24 «»
By: Son Duong
new clone OM2M version (clone on 3.12.2016) not working?
Hello all,
I created an application plugin as followed this tutorial: https://wiki.eclipse.org/OM2M/one/Developer. When run it, I got 5000 Internal error.
What I did was creating an AE called EVALUATE_VALUES and deployed it to the mn-cse node.
An...
|
| 143 |
Forum: Jubula «»
Posted on: Wed, 19 October 2016 06:20 «»
By: Eclipse User
Re: Select relative path in Tree - SERIOUS BUG
Hi Jim,
I am very sorry for the delay. Could you please send those to the address: kevin.barbe@bredex.de
Best regards,
Kevin
|
| 144 |
Forum: Kura «»
Posted on: Mon, 17 October 2016 10:14 «»
By: Said Ucar
MqttDataTransport client-id parameter
Hello,
I wonder that Kura on Raspberry Pi, the MqttDataTransport client-id parameter is always eth mac address or it could be wlan mac address?
Thanks in advance,
Said.
|
| 145 |
Forum: Jubula «»
Posted on: Mon, 19 September 2016 06:52 «»
By: Alexandra Schladebeck
Re: Click on View's Menu in RCP View
Hi Jim,
can you post an image of the view with the component you want to address highlighted?
Thanks!
Alex
|
| 146 |
Forum: Kura «»
Posted on: Wed, 14 September 2016 09:06 «»
By: Wang Murphy
Re: Internal Error when trying to open kura using loopback.
Hello,
I met the same problem before and I made through by:
--- if you can open kura web ui (http://< your RPi's ip>/kura), login and go to System->Network, choose interface 'wlan0', on 'tcp/ip' panel, change 'status' type to 'Enable for WAN',...
|
| 147 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Tue, 30 August 2016 10:45 «»
By: Alois Zoitl
Re: Problem in communication Publish/Subscribe
Hi,
this is strange. My question for the other communication is are these mulitcast or point to point connections? Because I see that you are using addresses starting with 224 which is to my knowledge no multicast address. Or am I missing something. If ...
|
| 148 |
Forum: Eclipse Titan «»
Posted on: Tue, 30 August 2016 07:03 «»
By: Elemer Lelik
Titan internal communication
The executing Titan architecture consists of the following components:
a Main Controller(MC), a Host Controller (HC) for each host on which Titan is executing,
a Main Test Component ( MTC), and zero to any number of Parallel Test Components (PTC)
(see...
|
| 149 |
Forum: Newcomers «»
Posted on: Mon, 15 August 2016 09:32 «»
By: Rebecca Kraus
Tomcat can not be started via Eclipse and XAMPP
Hello,
I installed Eclipse Java Neon and XAMPP.
In Eclipse Java Neon I changed the Tomcat Ports from the standard value
Tomcat admin port 8005
HTTP/1.1 8080
AJP/1.3 8009
to the new values
Tomcat admin port 8044
HTTP/1.1 8088
AJP/1.3...
|
| 150 |
Forum: JFace «»
Posted on: Fri, 12 August 2016 07:32 «»
By: Thomas Schindl
Re: [Databinding/E4] Binding of nested properties
On 11.08.16 15:09, Ralf Heydenreich wrote:
> Am 23.07.2016 um 02:05 schrieb Ralf Heydenreich:
>> Hi all,
>> I've an editor (MPart) which has a bound model. The model is, e.g., a
>> person with an address and an alternative address....
|
| 151 |
Forum: TMF (Xtext) «»
Posted on: Wed, 03 August 2016 15:12 «»
By: Ernesto Posse
Re: Composing multiple grammars and parser backend
Sorry for pressing on this, and I understand it would be a considerable effort, but why is ANTLR is not suitable? According to [1] ANTLR 3.1 does support grammar composition.
Furthermore, from the previous posts, I got the impression that Sebastian's p...
|
| 152 |
Forum: Vorto «»
Posted on: Sun, 31 July 2016 05:32 «»
By: Guy Benhaim
Vorto return multiple
Hi,
Can an Operation() return multiple values of different types, like: integer UID, text string, IP Address? (i.e. not an array of same type)
How?
Guy
|
| 153 |
Forum: Java Development Tools (JDT) «»
Posted on: Thu, 21 July 2016 02:31 «»
By: jagdeep kaur
Re: EMF refactor
when i am trying to install emf refactor in eclipse juno
help>install new software>work with: http://download.eclipse.org/releases/juno
there is error
unable to read repository at http://download.eclipse.org/releases/juno/context.xml
Unable to...
|
| 154 |
Forum: PHP Development Tools (PDT) «»
Posted on: Wed, 20 July 2016 10:42 «»
By: Ethereal1m Mising name
Xdebug cannot remote debug
Dear all,
After upgrade to windows 10, I'm unable to connect to remote host. The log says:
I: Checking remote connect back address.
I: Remote address found, connecting to ::1:9001.
E: Could not connect to client. :-(
The following is xdebug conf...
|
| 155 |
Forum: EMF «»
Posted on: Thu, 30 June 2016 11:38 «»
By: Ed Merks
Re: [xcore] value is not stored when set via xtend
Chris,
Comments below.
On 30.06.2016 02:01, chris yo wrote:
> I have an xcore file with the following classes:
>
> class Information {
> String sName
> String birthday
> String age
> }
>
> class Directory {
>...
|
| 156 |
Forum: EMF «»
Posted on: Thu, 30 June 2016 09:38 «»
By: chris yo
[xcore] How to set a class type variable
I have an xcore file with the following classes:
class Information {
String sName
String birthday
String age
}
class Directory {
String name
String address
contains Information xInfo
}
The variables in the class Directory is set by xtext...
|
| 157 |
Forum: Kura «»
Posted on: Wed, 08 June 2016 20:24 «»
By: David Woodard
Re: Implementing DataServiceListener
Hello,
First, as you noted, the mechanism for using DataServiceListener will be different between v1.4.0 and v2.0.0. The two versions will be compatible, which is why the interface has be deprecated and not removed. Since your code is setup for v1.4.0, ...
|
| 158 |
Forum: Newcomers «»
Posted on: Mon, 06 June 2016 22:40 «»
By: Steve Price
Re: Eclipse will not start on SunOS. libgtk-x11-2.0.so.0: open failed: No such file or directory
Using Opera browser on SunOS I get this error:
Unable to complete secure transaction
You tried to access the address https://eclipse.googlesource.com/platform/eclipse.platform.swt.binaries/+/v4430, which is currently unavailable. Please make sure tha...
|
| 159 |
Forum: OM2M «»
Posted on: Thu, 12 May 2016 19:07 «»
By: Mahdi Ben Alaya
Re: Use of the retargeting concept in the oneM2M version
Ok. What is the exact address that you want to trigger from your device ?
http://192.168.0.118:80/true
http://192.168.0.118:80/op=true
http://192.168.0.118:80/somethign/true
etc.
|
| 160 |
Forum: OM2M «»
Posted on: Thu, 12 May 2016 18:38 «»
By: Mahdi Ben Alaya
Re: Use of the retargeting concept in the oneM2M version
OM2M is working correctly. The error is returned from your AE listener server.
According to the log, the error message is:
<h1>404 Not Found</h1>
No context found for request
I am pretty sure that a part of your URI is missing.
Try to...
|
| 161 |
Forum: BIRT «»
Posted on: Wed, 20 April 2016 13:35 «»
By: Kamran Ali Kalwar
BIRT REPORT
how i pass the database parameters : username and password in url . I am generating the report by birt report url call.
Example :
http://ip_address:port/birts/run?__report=BirtReport.rptdesign&__format=pdf&__parameterpage=false¶m1=233...
|
| 162 |
Forum: TMF (Xtext) «»
Posted on: Wed, 20 April 2016 10:27 «»
By: RamaRao Nandamuri
Xtext # comment
Hi,
I have hash comment for my editor something like below and my terminal rule is terminal HASH_COMMENT: '#' !('\n' | '\r')*;
But it is not showing green color. I want to highlight in green color. If I use it with SL_COMMENT it is showing in green b...
|
| 163 |
Forum: EMF «»
Posted on: Fri, 08 April 2016 19:52 «»
By: Parisa Moosavi
Re: [XCore] The Body of the method
Hi,
I though the same as you but you can see in the files which are attached that the body of the defined operation in the xcore file is not saved in the ecore file.
below is an example of xcore file
@Ecore(nsURI="http://www.eclipse.org/emf/2...
|
| 164 |
Forum: EMF «»
Posted on: Sun, 27 March 2016 02:39 «»
By: Jay Norwood
CDO handling of extended metadata
I'm converting the EMF Extended Library Model example to CDO, following the CDO documentation instructions to create the generator for a CDO reflective model.
Most things work ok.
Some problems with certain model attributes being transient; but I chang...
|
| 165 |
Forum: Test and Performance Tools Platform (TPTP) «»
Posted on: Sat, 26 March 2016 13:31 «»
By: Marllos P. Prado
Survey on unit testing practices and flaky tests
Dear Sir/Madam,
My name is Marllos Prado, PhD student at Universidade Federal de Goias (Brazil) and supervised by Professor Dr. Auri Vicenzi. We are contacting you to ask for some valuable assistance with our research.
To be more specific, our projec...
|
| 166 |
Forum: Eclipse 4 «»
Posted on: Tue, 15 March 2016 02:06 «»
By: Chuck Crisler
creating C source file in Java project
I posted this question in the C/C++ forum last week but haven't gotten an answer.
I am using Mars.1 with a recent (latest?) CDT on Fedora 23 Linux. I have a Java project defined that will use C/JNI for media. I am trying to create the C files within the...
|
| 167 |
Forum: DSDP - Real-Time Software Components (RTSC) «»
Posted on: Sun, 06 March 2016 20:43 «»
By: Chris H
IPeripheral and driver development
I am currently creating generic peripheral drivers (UART, SPI, I2C, etc.) similar to TI-RTOS drivers but implemented using a proxy/delegate scheme like is done for the SYS/BIOS HAL. I would like to keep the device specific register address and structure i...
|
| 168 |
Forum: 4DIAC - Framework for Distributed Industrial Automation and Control «»
Posted on: Sat, 05 March 2016 10:33 «»
By: Long Tran Phu
Re: Raspberry Pi platform support
Thank you for your answer.
I have order the modules.
However I am now facing the problem of using 4Diac and Raspberry Pi.
I have install Forte in Raspberry Pi.
However I don't know how to download the application to raspberry Pi. I tried to use Xplus3...
|
| 169 |
Forum: Oomph «»
Posted on: Thu, 03 March 2016 13:19 «»
By: Steffen Holzer
Re: Use own tasks
Hi Ed,
Thank you a thousand times for your patience and help. I solved my problems with:
publish the model directly to the update site project in the workspace
Using the file:// protocoll to address my local files
Using only unix conform pat...
|
| 170 |
Forum: Eclipse Foundation «»
Posted on: Mon, 22 February 2016 13:47 «»
By: Denis Roy
Re: Account Registration: Email not delivered to private mail server
If you can email me the public IP address of your mail server (webmaster at eclipse org) I can look on my end to see what the problem is.
|
| 171 |
Forum: Eclipse Foundation «»
Posted on: Sat, 20 February 2016 19:31 «»
By: Damon Dransfeld
Account Registration: Email not delivered to private mail server
Hi,
I wanted to use my private mail server to register an account for the eclipse community.
So I filled the registration form with my Details, including my private mail address. The 'funny' thing:
Feb 20 19:05:53 srv01 postfix/smtpd[20097]: connect f...
|
| 172 |
Forum: Jubula «»
Posted on: Mon, 15 February 2016 20:34 «»
By: Drew Snader
Issues When Starting/Stopping Web Browser AUTs
I am seeing different (possibly related) anomalies when I attempt to use various web browsers to run the Jubula example SimpleAdderHTML tests and would appreciate any information on how to resolve them. The issues occur when I start and stop a Chrome AUT o...
|
| 173 |
Forum: TMF (Xtext) «»
Posted on: Mon, 01 February 2016 08:49 «»
By: pranay roy
Changing the port for web DSL module
I am trying to change the port from default port to 8090 .
I added a maven plugin like
<configuration>
<httpConnector>
<!--host>localhost</host-->
<port>8090</port>
</htt...
|
| 174 |
Forum: SWTBot «»
Posted on: Sun, 31 January 2016 21:46 «»
By: Mickael Istria
Re: Testing a dialog with Browse button > DirectoryDialog
On 01/07/2016 11:38 AM, Stephan Druskat wrote:
> I'm doing bot.button("Browse").click(), the DirectoryDialog opens, and
> the test stalls because I cannot address the DirectoryDialog.
Yes, I confirm that. Since SWTBot cannot interact w...
|
| 175 |
Forum: Jobs and employment «»
Posted on: Thu, 14 January 2016 20:34 «»
By: Paul White
* FULFILLED * Senior Eclipse Platform Developer
* THIS POSITION IS NO LONGER AVAILABLE *
The Eclipse Foundation has committed to using the funds donated through its Friends of Eclipse program to make significant and meaningful enhancements and improvements to the Eclipse IDE/Platform (the FEEP progra...
|
| 176 |
Forum: Lyo «»
Posted on: Tue, 29 December 2015 18:48 «»
By: Jim Ruehlin
Re: Error making POST call to DOORS[9.6] .
Abhishek, this may be a Doors issue - I think they've changed some of their OSLC support in recent releases. I'm looking for someone in that organization who might be able to address this question, but it's the US Holiday season so it may be next week befo...
|
| 177 |
Forum: C / C++ IDE (CDT) «»
Posted on: Tue, 29 December 2015 16:17 «»
By: David Vavra
Re: sending/receiving/manipulating strings with sockets
I meant there is no reason for your code to change the vowel in str1 to a space since you don't use str1 later. I didn't say anything about pointers.
You could have found these problems by stepping through the code with a debugger or by simplifying the ...
|
| 178 |
Forum: Eclipse SmartHome «»
Posted on: Fri, 18 December 2015 15:35 «»
By: Kai Kreuzer
Re: writeOnly channel
The fewest channels are write-only, so I doubt that this optimization would bring much benefit.
You would still want to have these functionality exposed in UIs and rules the same way as the other functionality and the concept (abstraction) for this are th...
|
| 179 |
Forum: Eclipse SmartHome «»
Posted on: Thu, 03 December 2015 13:42 «»
By: Daniel Walters
Changing Thing label
I'm working on a binding and noticed that I can set the label on a DiscoveryResult and the resulting Thing has the given label in the PaperUI.
Where is this label stored and what's the best way to change it programmatically?
On a slightly related no...
|
| 180 |
Forum: Eclipse Scout «»
Posted on: Tue, 01 December 2015 20:52 «»
By: Jeremie Bresson
Re: Application Error when launch SWT Client
And what is the content of the mentioned logfile?
> C:\Projects_Luna\runtime-CompareTestResult-swt-client-dev.product\.metadata\.log
From the Stacktrace in "FrameworkEventError.jpg", it seems that "javax.annotation" is missing. I...
|
| 181 |
Forum: Newcomers «»
Posted on: Wed, 25 November 2015 19:38 «»
By: Matthew Birchler
32-bit application doesn't work...
I created a JavaFX program in Eclipse using e(fx)clipse. it uses the 64-bit JVM (jdk1.8.0_65). It works perfectly both in the IDE, and also as a deployment.
Now, after realizing several people in my organization have 32-bit machines, I am trying to pa...
|
| 182 |
Forum: Eclipse Titan «»
Posted on: Tue, 10 November 2015 20:54 «»
By: Muhammad Burhan Hassan
Re: Cannot make Demo Example from Titan
Hi Elmer,
Yes i think it worked. I have updated the .baschrc filr, and now env variables are ok. I can make the example..
But i have an issue with execution of Test Suit..Have a look at ...
b.hassan@PMX-NB07 ~/titan/hello-Copy
$ ttcn3_makefilegen...
|
| 183 |
Forum: Eclipse Platform «»
Posted on: Tue, 10 November 2015 15:42 «»
By: Eclipse User
Re: Any way to safely step through plugin code that results in popup menus?
For this kind of work, you need to debug from another machine. Launch your app with something like:
-Xdebug -agentlib:jdwp=transport=dt_socket,server=y,address=8000
and create a "Remote Java Application" profile to debug.
I find using a VM ...
|
| 184 |
Forum: Eclipse Process Manager (Stardust) «»
Posted on: Tue, 03 November 2015 10:41 «»
By: Ts Patil
Re: Resuming execution of hibernated activity
HI Andreas,
Thanks for your quick reply.
I m having a use case like before coming to third activity . I m sending an email and hibernate. Next is till the email recipient responds back i have to hold (hibernate ) the activity or hold the process. ...
|
| 185 |
Forum: Papyrus «»
Posted on: Mon, 19 October 2015 11:53 «»
By: Joachim Engelhardt
Re: Display Stereotypes in Sequence Diagrams
Does nobody have an idea about this?
I will be already satisfied with a short hint, if it is possible in
general or will need some complex configuration or even code based
extensions.
We already deal with customizations like Diagram Palettes and Cust...
|
| 186 |
Forum: C / C++ IDE (CDT) «»
Posted on: Sun, 18 October 2015 14:20 «»
By: Herman Reintke
Arduino C++ IDE for Eclipse Windows, application build fails
Running Windows 8.1.
Installed Eclipse 4.5.1.(32 bit version)
Installed Arduino C++ IDE from marketplace
Installed boards : Arduino Nano, NodemcuV2
Installation proceeds and ends without error.
After creating a simple program and trying to run.
...
|
| 187 |
Forum: TMF (Xtext) «»
Posted on: Thu, 08 October 2015 11:32 «»
By: Niek Hulsman
Re: Using several xtext grammars in standalone mode gives errors during doSetup
I'm getting the same error. It happens when i'm trying to create a resource from a class/module in which the StandaloneSetup was not initialized for the first time. I have only one DSL, and i'm not getting any errors during initializing even when i'm init...
|
| 188 |
Forum: C / C++ IDE (CDT) «»
Posted on: Thu, 03 September 2015 21:43 «»
By: Marc Samson
Yocto project - Remote debugging problem
Hi
I am a newcomer to Eclipse and Linux. I have made a Yocto SDK that I am using in Eclipse to build the demo HelloWorld app that will run on a remote board that has the image corresponding to the SDK I am using.
In my remote debug configuration I s...
|
| 189 |
Forum: BIRT «»
Posted on: Thu, 03 September 2015 07:55 «»
By: prue IIBO
Re: Parameterized report and parameter display when runni ng the report
I do not understand what you mean by your parameter refers to "Dataset" should be "Dataset1 '.
of which parameter you talking about? the parameter of the report or parameter dataset?
I explained again that I did
I first created a parame...
|
| 190 |
Forum: Paho «»
Posted on: Tue, 11 August 2015 19:50 «»
By: Guy Yannick
Paho MQQTT Client get an java.util.concurrent.TimeoutException
Test Env.
Paho MQTT Client 1.0.2
Mosquitto 1.4.2
JEE 7
Hello,
I'm trying to implement a MQTT client with Paho. The Client launch (subscribe a specific topic) on the MQTT Broker to receive messages from an Android App.
After the first publish, i...
|
| 191 |
Forum: Eclipse SmartHome «»
Posted on: Sun, 26 July 2015 13:39 «»
By: Marcus of Wetware Labs
Re: MQTT binding for ESH
Hi guys,
I implemented the MQTT bridge and functionality to receiving messages. The code is there on the GitHub page: https://github.com/WetwareLabs/openhab2
First problem in the previous designs is that it doesn't seem possible to map channels as &...
|
| 192 |
Forum: Eclipse SmartHome «»
Posted on: Sat, 25 July 2015 13:01 «»
By: Marcus of Wetware Labs
Re: MQTT binding for ESH
Hi all,
I've been playing with MQTT, Openhab et al for a a while and I've tried the OH1 plug-in with OH2 and it seems to work just fine (as long as also the io.transport.mqtt library from OH1 is used). There's a Docker image here https://github.com/Wetw...
|
| 193 |
Forum: Target Management «»
Posted on: Tue, 07 July 2015 10:24 «»
By: Wiliam Ferraciolli
Daemon Server on Windows for FTP
Can anyone share any thought please?
I have set up Daemon on a Windows machine. I am starting the server by running the daemon. bat . the cmd window pops up saying Daemon running on serverName port No.
When i go to Eclipse and create a new connect...
|
| 194 |
Forum: Papyrus «»
Posted on: Mon, 29 June 2015 08:42 «»
By: Patrick Tessier
Re: Customizing UML Class Diagram
Hi,
In papyrus mars, it exists a mecanism in order to add compartment in diagram.
The documentation is under development.
Nevetheless, part of the document can be found in the git at this address: org.eclipse.papyrus\plugins\infra\gmfdiag\org.eclipse....
|
| 195 |
Forum: Eclipse Titan «»
Posted on: Tue, 23 June 2015 13:38 «»
By: Elemer Lelik
Re: Missing Titan Documentation for Eclipse
Hi Johannes,
thank you for your interest in Eclipse Titan.
Titan consists of two parts:
-the core part , the one you have downloaded and compiled, and which can be used stand-alone with a command line interface;
-the Eclipse plug-ins which a...
|
| 196 |
Forum: C / C++ IDE (CDT) «»
Posted on: Wed, 17 June 2015 14:31 «»
By: SHIBAM DEBBARMA
Problem with string handling using scanf() and gets() function.
Here is my code,
#include <stdio.h>
#include <stdlib.h>
char membershipstatus();
char checkmembership(char check);
void enterdetails(int status);
int main(void)
{
setvbuf(stdout, NULL, _IONBF, 0);
int status;
char check;
chec...
|
| 197 |
Forum: Compare «»
Posted on: Thu, 28 May 2015 09:46 «»
By: Mark Hoffmann
Attribute changes in containment object result in ReferenceChange, but sometimes in AttributeChange
Hello,
I discovered some thing I dont understand. I use EMF Compare in an JEE environment.
I have an object e.g. Person that has a containing object Address. If I change the street attibute of the Address instance and compare the two person instances a...
|
| 198 |
Forum: EMF "Technology" (Ecore Tools, EMFatic, etc) «»
Posted on: Wed, 27 May 2015 16:53 «»
By: Edgar Mueller
Re: [EMFStore][EMF Forms] NullPointerException
Hi Akira,
sure, makes sense. Feel free to file a bug for it
(https://bugs.eclipse.org/bugs/enter_bug.cgi?product=EMFStore) and we'll
try to address it for 1.6.
Contributions are also welcome ;)
Thanks,
Edgar
--
Edgar Mueller
Get Professio...
|
| 199 |
Forum: Kura «»
Posted on: Tue, 12 May 2015 05:42 «»
By: Amit Kumar Mondal
Re: Error in Kura
Hi David,
I have installed the new Raspberry-Pi 2 Snapshot Build and it was behaving the same way as the Stable Version of Raspberry Pi Model B+.
Yesterday I checked the Kura log and found errors in DataServiceImpl and NetworkServiceImpl.
I checke...
|
| 200 |
Forum: EMF «»
Posted on: Mon, 04 May 2015 17:35 «»
By: Eike Stepper
Re: [CDO] MARS Enhancements
Am 04.05.2015 um 17:31 schrieb John E. Conlon:
> My company is building an application on top of EMF and CDO.
>
> Current plans are to:
>
> 1. Allow the user to run a local repo when the application is started as described in:
> ht...
|
Search
Help
Register
Login
Home