[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
[
List Home]
|
[tracecompass-dev] Fwd: FW: [PATCH 0/8] perf tools: Add perf data CTF conversion
|
Hi all,
The perf-CTF support was proposed for inclusion upstream! Trace Compass
master should be able to open those traces correctly (if not, please
open a bug!). See the patchset introduction email, below, for
instructions and screenshots.
Cheers,
Alexandre
-----Original Message-----
From: Jiri Olsa [mailto:jolsa@xxxxxxxxxx]
Sent: December-03-14 11:24 AM
To: linux-kernel@xxxxxxxxxxxxxxx
Cc: Arnaldo Carvalho de Melo; David Ahern; Dominique Toupin; Frederic Weisbecker; Jeremie Galarneau; Jiri Olsa; Mathieu Desnoyers; Namhyung Kim; Paul Mackerras; Peter Zijlstra; Sebastian Andrzej Siewior; Tom Zanussi
Subject: [PATCH 0/8] perf tools: Add perf data CTF conversion
hi,
this is follow up on original RFC patchset:
http://marc.info/?t=140732735600004&r=1&w=2
Basically we are adding 'perf data convert' command to allow conversion of perf data file into CTF [1] data.
Changes from RFC:
- able to generate CTF data, that are possible to be displayed under
tracecompas GUI [3], please check several screenshots in here [4]
- storing CTF data streams per cpu
- several cleanups
Examples:
- Catch default perf data (cycles event):
$ perf record ls
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data (~546 samples) ]
- To display converted CTF data run [2]:
$ babeltrace ./ctf-data/
[03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
[03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
[03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
[03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
[03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 }
[03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 }
- To get some nice output in tracecompas GUI [3], please capture sched:*
and syscall tracepoints like:
# perf record -e 'sched:*,raw_syscalls:*' -a
^C[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 412.347 MB perf.data (~18015721 samples) ]
- To convert perf data file run:
# perf data convert --to-ctf=./ctf
[ perf data convert: Converted 'perf.data' into CTF data './ctf' ]
[ perf data convert: Converted and wrote 408.421 MB (3964792 samples) ]
- To display converted CTF data run [2]:
# babeltrace ./ctf-data/
[23:32:20.165354855] (+0.000000507) sched:sched_wakeup: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF810BCA72, perf_tid = 0, perf_pid = 0, perf_id = 462554, perf_period = 1, common_type = 265, ...
[23:32:20.165359078] (+0.000001181) sched:sched_switch: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF8172A110, perf_tid = 0, perf_pid = 0, perf_id = 462562, perf_period = 1, common_type = 263, ...
[23:32:20.165364686] (+0.000000328) sched:sched_stat_runtime: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF810C8AE5, perf_tid = 5326, perf_pid = 5326, perf_id = 462610, perf_period = 11380, ...
[23:32:20.165366067] (+0.000001205) sched:sched_switch: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF8172A110, perf_tid = 5326, perf_pid = 5326, perf_id = 462562, perf_period = 1, common_type ...
[23:32:20.165723312] (+0.000001479) sched:sched_stat_runtime: { cpu_id = 2 }, { perf_ip = 0xFFFFFFFF810C8AE5, perf_tid = 11821, perf_pid = 11821, perf_id = 462612, perf_period = 1000265, ...
[23:32:20.065282391] (+?.?????????) raw_syscalls:sys_enter: { cpu_id = 1 }, { perf_ip = 0xFFFFFFFF810230AF, perf_tid = 26155, perf_pid = 26155, perf_id = 462635, perf_period = 1, ...
[23:32:20.065286422] (+0.000004031) raw_syscalls:sys_exit: { cpu_id = 1 }, { perf_ip = 0xFFFFFFFF810231D8, perf_tid = 26155, perf_pid = 26155, perf_id = 462639, perf_period = 1, ...
- Or run tracecompass and open the CTF data ;-)
Changes are also reachable in here:
git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf.git
perf/core_ctf_convert
thanks,
jirka
[1] Common Trace Format - http://www.efficios.com/ctf [2] babeltrace - http://www.efficios.com/babeltrace
[3] Trace compass - http://projects.eclipse.org/projects/tools.tracecompass
[4] screenshots - http://people.redhat.com/~jolsa/tracecompass-perf/
Cc: Arnaldo Carvalho de Melo <acme@xxxxxxxxxx>
Cc: David Ahern <dsahern@xxxxxxxxx>
Cc: Dominique Toupin <dominique.toupin@xxxxxxxxxxxx>
Cc: Frederic Weisbecker <fweisbec@xxxxxxxxx>
Cc: Jeremie Galarneau <jgalar@xxxxxxxxxxxx>
Cc: Jiri Olsa <jolsa@xxxxxxxxxx>
Cc: Mathieu Desnoyers <mathieu.desnoyers@xxxxxxxxxxxx>
Cc: Namhyung Kim <namhyung@xxxxxxxxx>
Cc: Paul Mackerras <paulus@xxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
Cc: Tom Zanussi <tzanussi@xxxxxxxxx>
---
Jiri Olsa (5):
perf tools: Add feature check for libbabeltrace
perf tools: Add new perf data command
perf data: Add perf data to CTF conversion support
perf data: Enable stream flush within processing
perf data: Add support for setting ordered_events queue size
Sebastian Andrzej Siewior (3):
perf data: Add a 'perf' prefix to the generic fields
perf data: Add tracepoint events fields CTF conversion support
perf data: Switch to multiple cpu stream files
tools/perf/Documentation/perf-data.txt | 40 ++++
tools/perf/Documentation/perf.txt | 7 +-
tools/perf/Makefile.perf | 9 +-
tools/perf/builtin-data.c | 119 ++++++++++
tools/perf/builtin.h | 1 +
tools/perf/command-list.txt | 1 +
tools/perf/config/Makefile | 24 ++
tools/perf/config/feature-checks/Makefile | 8 +-
tools/perf/config/feature-checks/test-all.c | 5 +
tools/perf/config/feature-checks/test-libbabeltrace.c | 8 +
tools/perf/perf.c | 1 +
tools/perf/util/data-convert-bt.c | 1060 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
tools/perf/util/data-convert-bt.h | 8 +
tools/perf/util/debug.c | 2 +
tools/perf/util/debug.h | 1 +
15 files changed, 1290 insertions(+), 4 deletions(-) create mode 100644 tools/perf/Documentation/perf-data.txt
create mode 100644 tools/perf/builtin-data.c create mode 100644 tools/perf/config/feature-checks/test-libbabeltrace.c
create mode 100644 tools/perf/util/data-convert-bt.c create mode 100644 tools/perf/util/data-convert-bt.h
