[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
[
List Home]
|
Re: [paho-dev] Paho Build help
|
For everyone's future reference, here is a link to the policy that I believe
David was referring to:
http://www.eclipse.org/org/documents/Eclipse_Using_Proprietary_Tools_Final.p
hp
> -----Original Message-----
> From: paho-dev-bounces@xxxxxxxxxxx [mailto:paho-dev-
> bounces@xxxxxxxxxxx] On Behalf Of David M Williams
> Sent: August-31-12 10:52 AM
> To: General development discussions for paho project
> Subject: Re: [paho-dev] Paho Build help
>
> I don't know enough technically to answer your question, but it is a
legitimate
> question. According to policy (pretty sure it is a written one,
somewhere,
> but if not it is an obvious common sense one) that occasionally
proprietary or
> non-free tools can be used by an Eclipse project in building or testing
their
> code, BUT it can not be _required_ by committers or community. I'd guess
in
> this case, the script or documentation needs to be improved to "swap in"
> some other compiler?
>
> So I too look forward to an answer. It would likely be worth a bugzilla
report,
> if the answer is not obvious/easy and requires some work to improve script
> or documentation.
>
> Thanks
>
>
>
>
> From: Julian Franks <julianatfranks@xxxxxxxxxxx>
> To: <paho-dev@xxxxxxxxxxx>,
> Date: 08/31/2012 08:11 AM
> Subject: Re: [paho-dev] Paho Build help
> Sent by: paho-dev-bounces@xxxxxxxxxxx
>
>
>
> Hi
> I have not looked further at this issue but do attach a snap shot of the
> makefile error output:
> Dont know much about build tool chains but understand that the line in the
> makefile where it is looking for the cross compiler and it cant find it,
it just
> bails out to error.
> Any help or work around for this would be most useful.
>
> ~/x-tools/arm-unknown-linux-uclibcgnueabi/bin/arm-unknown-linux-
> uclibcgnueabi-gcc
> -fPIC -Os -Wall -shared -Wl,-soname,libmqttv3c.so -o
> linux_ARM_uclibc/libmqttv3c.so
> /home/franksj/org.eclipse.paho.mqtt.c/src/*.c
> /bin/sh: 1:
> /home/franksj/x-tools/arm-unknown-linux-uclibcgnueabi/bin/arm-
> unknown-linux-uclibcgnueabi-gcc:
> not found
> make: *** [linux_ARM_uclibc/libmqttv3c.so] Error 127
>
>
>
> > From: paho-dev-request@xxxxxxxxxxx
> > Subject: paho-dev Digest, Vol 8, Issue 16
> > To: paho-dev@xxxxxxxxxxx
> > Date: Thu, 30 Aug 2012 12:00:08 -0400
> >
> > Send paho-dev mailing list submissions to paho-dev@xxxxxxxxxxx
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://dev.eclipse.org/mailman/listinfo/paho-dev
> > or, via email, send a message with subject or body 'help' to
> > paho-dev-request@xxxxxxxxxxx
> >
> > You can reach the person managing the list at
> > paho-dev-owner@xxxxxxxxxxx
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of paho-dev digest..."
> >
> >
> > Today's Topics:
> >
> > 1. Re: Paho build help (Ian Craggs)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Wed, 29 Aug 2012 17:31:45 +0100
> > From: Ian Craggs <icraggs@xxxxxxxxxxxxxxxxxxxxxxx>
> > To: General development discussions for paho project
> > <paho-dev@xxxxxxxxxxx>
> > Subject: Re: [paho-dev] Paho build help
> > Message-ID: <503E43F1.6000101@xxxxxxxxxxxxxxxxxxxxxxx>
> > Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
> >
> > Julian,
> >
> > this should still have built the library for 32-bit Linux, regardless
> > of
>
> > this error (which I should fix - I'll get onto it). Did you look for it?
> >
> > (As an aside I would like to correct a misunderstanding. You do not
> > have to pay anything for the cross-compilers! You can use crosstool-ng
> > to build open source gcc cross-compilers. You can pay for some
> > pre-built toolchains, but it is in many cases not necessary).
> >
> > Ian Craggs
> >
> > On 25/08/12 13:00, Julian Franks wrote:
> > > Hi Paho community,
> > >
> > > First apologies for what some may seem an ignorant post, but i
> > > really am stuck with the initial build procedure as written on the
> > > wiki for
> the
> > > Client and core. The questions:
> > > When i use the Makefile to compile the code as downloaded from git,
> > > i get error 127 from the fact that i do not have the cross compiler
> > > x-tools, and cannot afford the purchase cost of $1000 for what is
> > > essentially an evaluation exercise. I really just want to play with
> > > it
>
> > > in Eclipse and see what it can do!!
> > > Is there a possible work around for this? or is there a case for
> > > building it under Eclipse??
> > >
> > > I am building on a Ubuntu 12.04 32 bit system, so how much work is
> > > required to compile it on said system ( i am a Good C programmer,
> > > but not much experience in low level Linux stuff, so any advise
> > > would be most welcome.
> > >
> > > Any help or pointers would be much appreciated.
> > >
> > > Thanks in advance
> > > Brum65
> > >
> > >
> > > _______________________________________________
> > > paho-dev mailing list
> > > paho-dev@xxxxxxxxxxx
> > > http://dev.eclipse.org/mailman/listinfo/paho-dev
> >
> > -------------- next part -------------- An HTML attachment was
> > scrubbed...
> > URL: <
> http://dev.eclipse.org/mailman/private/paho-
> dev/attachments/20120829/9eec533f/attachment.html
> >
> >
> > ------------------------------
> >
> > _______________________________________________
> > paho-dev mailing list
> > paho-dev@xxxxxxxxxxx
> > http://dev.eclipse.org/mailman/listinfo/paho-dev
> >
> >
> > End of paho-dev Digest, Vol 8, Issue 16
> > ***************************************
> _______________________________________________
> paho-dev mailing list
> paho-dev@xxxxxxxxxxx
> http://dev.eclipse.org/mailman/listinfo/paho-dev
