Re: [geomesa-users] Exception - Upper bound must be greater than lower b

[David Boyd <dboyd@xxxxxxxxxxxxxxxxx>]

All:

  Some more and different information.  This time instead of the 
integer bins being the same they do have different numbers.  In this
case the upper record (which is my new updated record I assume) has more 
coordinates than the lower.

Guess I will try sorting the coordinate list see if that changes anything.

> 2017-07-01 12:59:04,224 | ERROR | [Thread-11] | 
> (Reports_Consumer.java:122) - Error while parsing action 
> 'stat/OneOrMore/ZeroOrMore/Sequence/org$locationtech$geomesa$utils$stats$StatParser$$singleStat/org$locationtech$geomesa$utils$stats$StatParser$$histogram/org$locationtech$geomesa$utils$stats$StatParser$$histogramAction1' 
> at input position (line 1, pos 521):
> Count();MinMax("Geos");MinMax("recordKey");TopK("recordKey");Histogram("Geos",10000,"MULTIPOINT 
> ((-116.3556900024414 35.40331268310547), (-116.72984313964844 
> 35.94012451171875))","MULTIPOINT ((-116.3556900024414 
> 35.40331268310547), (-116.57267761230469 35.73548889160156), 
> (-116.2886962890625 35.62590408325195), (-116.29100036621094 
> 35.640228271484375), (-116.55487060546875 35.840415954589844), 
> (-116.4508056640625 35.49846649169922), (-116.43860626220703 
> 35.50336837768555), (-116.72984313964844 
> 35.94012451171875))");Histogram("recordKey",1000,"013b4a9e-a5ad-46a8-b58f-17bf5cef8171","e450fccb-cd8a-42fd-9bcb-3c7036defaaa");Frequency("recordKey",20)
> ^
>
> java.lang.IllegalArgumentException: requirement failed: Upper bound 
> must be greater than lower bound: lower='MULTIPOINT 
> ((-116.3556900024414 35.40331268310547), (-116.72984313964844 
> 35.94012451171875))'(2564346587991557940) upper='MULTIPOINT 
> ((-116.3556900024414 35.40331268310547), (-116.57267761230469 
> 35.73548889160156), (-116.2886962890625 35.62590408325195), 
> (-116.29100036621094 35.640228271484375), (-116.55487060546875 
> 35.840415954589844), (-116.4508056640625 35.49846649169922), 
> (-116.43860626220703 35.50336837768555), (-116.72984313964844 
> 35.94012451171875))'(2564346541289799415)
> org.parboiled.errors.ParserRuntimeException: Error while parsing 
> action 
> 'stat/OneOrMore/ZeroOrMore/Sequence/org$locationtech$geomesa$utils$stats$StatParser$$singleStat/org$locationtech$geomesa$utils$stats$StatParser$$histogram/org$locationtech$geomesa$utils$stats$StatParser$$histogramAction1' 
> at input position (line 1, pos 521):
> Count();MinMax("Geos");MinMax("recordKey");TopK("recordKey");Histogram("Geos",10000,"MULTIPOINT 
> ((-116.3556900024414 35.40331268310547), (-116.72984313964844 
> 35.94012451171875))","MULTIPOINT ((-116.3556900024414 
> 35.40331268310547), (-116.57267761230469 35.73548889160156), 
> (-116.2886962890625 35.62590408325195), (-116.29100036621094 
> 35.640228271484375), (-116.55487060546875 35.840415954589844), 
> (-116.4508056640625 35.49846649169922), (-116.43860626220703 
> 35.50336837768555), (-116.72984313964844 
> 35.94012451171875))");Histogram("recordKey",1000,"013b4a9e-a5ad-46a8-b58f-17bf5cef8171","e450fccb-cd8a-42fd-9bcb-3c7036defaaa");Frequency("recordKey",20)
> ^
>
> java.lang.IllegalArgumentException: requirement failed: Upper bound 
> must be greater than lower bound: lower='MULTIPOINT 
> ((-116.3556900024414 35.40331268310547), (-116.72984313964844 
> 35.94012451171875))'(2564346587991557940) upper='MULTIPOINT 
> ((-116.3556900024414 35.40331268310547), (-116.57267761230469 
> 35.73548889160156), (-116.2886962890625 35.62590408325195), 
> (-116.29100036621094 35.640228271484375), (-116.55487060546875 
> 35.840415954589844), (-116.4508056640625 35.49846649169922), 
> (-116.43860626220703 35.50336837768555), (-116.72984313964844 
> 35.94012451171875))'(2564346541289799415)
>     at org.parboiled.MatcherContext.runMatcher(MatcherContext.java:366)
>     at 
> org.parboiled.matchers.SequenceMatcher.match(SequenceMatcher.java:46)
>     at 
> org.parboiled.parserunners.BasicParseRunner.match(BasicParseRunner.java:77)
>     at org.parboiled.MatcherContext.runMatcher(MatcherContext.java:351)
>     at org.parboiled.matchers.FirstOfMatcher.match(FirstOfMatcher.java:41)
>     at 
> org.parboiled.parserunners.BasicParseRunner.match(BasicParseRunner.java:77)
>     at org.parboiled.MatcherContext.runMatcher(MatcherContext.java:351)
>     at 
> org.parboiled.matchers.SequenceMatcher.match(SequenceMatcher.java:46)
>     at 
> org.parboiled.parserunners.BasicParseRunner.match(BasicParseRunner.java:77)
>     at org.parboiled.MatcherContext.runMatcher(MatcherContext.java:351)
>     at 
> org.parboiled.matchers.ZeroOrMoreMatcher.match(ZeroOrMoreMatcher.java:39)
>     at 
> org.parboiled.parserunners.BasicParseRunner.match(BasicParseRunner.java:77)
>     at org.parboiled.MatcherContext.runMatcher(MatcherContext.java:351)
>     at 
> org.parboiled.matchers.SequenceMatcher.match(SequenceMatcher.java:46)
>     at 
> org.parboiled.parserunners.BasicParseRunner.match(BasicParseRunner.java:77)
>     at org.parboiled.MatcherContext.runMatcher(MatcherContext.java:351)
>     at 
> org.parboiled.matchers.SequenceMatcher.match(SequenceMatcher.java:46)
>     at 
> org.parboiled.parserunners.BasicParseRunner.match(BasicParseRunner.java:77)
>     at org.parboiled.MatcherContext.runMatcher(MatcherContext.java:351)
>     at 
> org.parboiled.parserunners.BasicParseRunner.run(BasicParseRunner.java:72)
>     at 
> org.parboiled.parserunners.ReportingParseRunner.runBasicMatch(ReportingParseRunner.java:86)
>     at 
> org.parboiled.parserunners.ReportingParseRunner.run(ReportingParseRunner.java:66)
>     at 
> org.parboiled.scala.parserunners.ReportingParseRunner.run(ReportingParseRunner.scala:34)
>     at 
> org.locationtech.geomesa.utils.stats.StatParser$.parse(StatParser.scala:36)
>     at org.locationtech.geomesa.utils.stats.Stat$.apply(Stat.scala:115)
>     at 
> org.locationtech.geomesa.accumulo.data.stats.AccumuloGeoMesaStats$$anonfun$statUpdater$1.apply(AccumuloGeoMesaStats.scala:116)
>     at 
> org.locationtech.geomesa.accumulo.data.stats.AccumuloGeoMesaStats$$anonfun$statUpdater$1.apply(AccumuloGeoMesaStats.scala:116)
>     at 
> org.locationtech.geomesa.index.stats.MetadataStatUpdater.<init>(MetadataBackedStats.scala:323)
>     at 
> org.locationtech.geomesa.accumulo.data.stats.AccumuloGeoMesaStats.statUpdater(AccumuloGeoMesaStats.scala:116)
>     at 
> org.locationtech.geomesa.index.geotools.GeoMesaFeatureWriter.<init>(GeoMesaFeatureWriter.scala:112)
>     at 
> org.locationtech.geomesa.accumulo.data.AccumuloModifyFeatureWriter.<init>(AccumuloFeatureWriter.scala:30)
>     at 
> org.locationtech.geomesa.accumulo.data.AccumuloDataStore.createFeatureWriterModify(AccumuloDataStore.scala:87)
>     at 
> org.locationtech.geomesa.index.geotools.GeoMesaDataStore.getFeatureWriter(GeoMesaDataStore.scala:387)
>     at 
> org.locationtech.geomesa.index.geotools.GeoMesaDataStore.getFeatureWriter(GeoMesaDataStore.scala:49)
>     at 
> com.incadencecorp.coalesce.framework.persistance.accumulo.AccumuloPersistor.updateFeatureIfExists(AccumuloPersistor.java:1621)
>     at 
> com.incadencecorp.coalesce.framework.persistance.accumulo.AccumuloPersistor.addNewFeatureForRecordSet(AccumuloPersistor.java:1499)
>     at 
> com.incadencecorp.coalesce.framework.persistance.accumulo.AccumuloPersistor.persistEntitySearchData(AccumuloPersistor.java:1337)
>     at 
> com.incadencecorp.coalesce.framework.persistance.accumulo.AccumuloPersistor.persistEntityObject(AccumuloPersistor.java:1144)
>     at 
> com.incadencecorp.coalesce.framework.persistance.accumulo.AccumuloPersistor.flattenObject(AccumuloPersistor.java:1057)
>     at 
> com.incadencecorp.coalesce.framework.persistance.CoalescePersistorBase.saveEntity(CoalescePersistorBase.java:99)
>     at 
> com.incadencecorp.coalesce.framework.CoalesceFramework.saveCoalesceEntity(CoalesceFramework.java:451)
>     at 
> com.incadencecorp.oe.ingest.reports.Reports_Consumer.run(Reports_Consumer.java:83)
>     at java.lang.Thread.run(Thread.java:745)
> Caused by: java.lang.IllegalArgumentException: requirement failed: 
> Upper bound must be greater than lower bound: lower='MULTIPOINT 
> ((-116.3556900024414 35.40331268310547), (-116.72984313964844 
> 35.94012451171875))'(2564346587991557940) upper='MULTIPOINT 
> ((-116.3556900024414 35.40331268310547), (-116.57267761230469 
> 35.73548889160156), (-116.2886962890625 35.62590408325195), 
> (-116.29100036621094 35.640228271484375), (-116.55487060546875 
> 35.840415954589844), (-116.4508056640625 35.49846649169922), 
> (-116.43860626220703 35.50336837768555), (-116.72984313964844 
> 35.94012451171875))'(2564346541289799415)
>     at scala.Predef$.require(Predef.scala:224)
>     at 
> org.locationtech.geomesa.utils.stats.WholeNumberBinnedArray.<init>(BinnedArray.scala:134)
>     at 
> org.locationtech.geomesa.utils.stats.BinnedGeometryArray.<init>(BinnedArray.scala:213)
>     at 
> org.locationtech.geomesa.utils.stats.BinnedArray$.apply(BinnedArray.scala:121)
>     at 
> org.locationtech.geomesa.utils.stats.Histogram.<init>(Histogram.scala:36)
>     at 
> org.locationtech.geomesa.utils.stats.StatParser$$anonfun$org$locationtech$geomesa$utils$stats$StatParser$$histogram$1$$anonfun$apply$7.apply(StatParser.scala:113)
>     at 
> org.locationtech.geomesa.utils.stats.StatParser$$anonfun$org$locationtech$geomesa$utils$stats$StatParser$$histogram$1$$anonfun$apply$7.apply(StatParser.scala:107)
>     at 
> org.parboiled.scala.rules.Rule$$anonfun$exec$4.apply(Rule.scala:221)
>     at 
> org.parboiled.scala.rules.Rule$$anonfun$exec$4.apply(Rule.scala:217)
>     at 
> org.parboiled.scala.rules.Rule$$anonfun$push$1.apply(Rule.scala:133)
>     at 
> org.parboiled.scala.rules.Rule$$anonfun$push$1.apply(Rule.scala:132)
>     at org.parboiled.scala.rules.Rule$$anon$1.run(Rule.scala:129)
>     at org.parboiled.matchers.ActionMatcher.match(ActionMatcher.java:96)
>     at 
> org.parboiled.parserunners.BasicParseRunner.match(BasicParseRunner.java:77)
>     at org.parboiled.MatcherContext.runMatcher(MatcherContext.java:351)
>     ... 42 more
> 2017-07-01 12:59:04,242 | ERROR | [Thread-11] | 
> (Reports_Consumer.java:134) - After closing consumer


On 7/1/17 12:43 PM, David Boyd wrote:
> All:
>
>    I am getting this exception when attempting to update a multi-point 
> feature.   I am not sure what the error means.
>
> Is it triggered by the (-180,-90) in the list?
>
> Is there a specific order to the multipoint list?
>
> Is this a bug?
>
> > 2017-07-01 12:14:43,881 | ERROR | [Thread-9] | 
> > (Reports_Consumer.java:122) - requirement failed: Upper bound must be 
> > greater than lower bound: lower='MULTIPOINT ((-116.2886962890625 
> > 35.62590408325195), (-116.29100036621094 35.640228271484375), 
> > (-116.55487060546875 35.840415954589844), (-116.4508056640625 
> > 35.49846649169922), (-116.43860626220703 35.50336837768555), (-180 
> > -90), (-116.72984313964844 35.94012451171875))'(2424506534976367614) 
> > upper='MULTIPOINT ((-116.2886962890625 35.62590408325195), 
> > (-116.29100036621094 35.640228271484375), (-116.55487060546875 
> > 35.840415954589844), (-116.4508056640625 35.49846649169922), 
> > (-116.43860626220703 35.50336837768555), (-180 -90), 
> > (-116.72984313964844 35.94012451171875))'(2424506534976367614)
> > java.lang.IllegalArgumentException: requirement failed: Upper bound 
> > must be greater than lower bound: lower='MULTIPOINT 
> > ((-116.2886962890625 35.62590408325195), (-116.29100036621094 
> > 35.640228271484375), (-116.55487060546875 35.840415954589844), 
> > (-116.4508056640625 35.49846649169922), (-116.43860626220703 
> > 35.50336837768555), (-180 -90), (-116.72984313964844 
> > 35.94012451171875))'(2424506534976367614) upper='MULTIPOINT 
> > ((-116.2886962890625 35.62590408325195), (-116.29100036621094 
> > 35.640228271484375), (-116.55487060546875 35.840415954589844), 
> > (-116.4508056640625 35.49846649169922), (-116.43860626220703 
> > 35.50336837768555), (-180 -90), (-116.72984313964844 
> > 35.94012451171875))'(2424506534976367614)
> >     at scala.Predef$.require(Predef.scala:224)
> >     at 
> > org.locationtech.geomesa.utils.stats.WholeNumberBinnedArray.<init>(BinnedArray.scala:134)
> >     at 
> > org.locationtech.geomesa.utils.stats.BinnedGeometryArray.<init>(BinnedArray.scala:213)
> >     at 
> > org.locationtech.geomesa.utils.stats.BinnedArray$.apply(BinnedArray.scala:121)
> >     at 
> > org.locationtech.geomesa.utils.stats.Histogram$.expandBins(Histogram.scala:208)
> >     at 
> > org.locationtech.geomesa.utils.stats.Histogram.observe(Histogram.scala:69)
> >     at 
> > org.locationtech.geomesa.utils.stats.SeqStat$$anonfun$observe$1.apply(SeqStat.scala:22)
> >     at 
> > org.locationtech.geomesa.utils.stats.SeqStat$$anonfun$observe$1.apply(SeqStat.scala:22)
> >     at scala.collection.immutable.List.foreach(List.scala:381)
> >     at 
> > org.locationtech.geomesa.utils.stats.SeqStat.observe(SeqStat.scala:22)
> >     at 
> > org.locationtech.geomesa.index.stats.MetadataStatUpdater.add(MetadataBackedStats.scala:325)
> >     at 
> > org.locationtech.geomesa.index.geotools.GeoMesaFeatureWriter.writeFeature(GeoMesaFeatureWriter.scala:135)
> >     at 
> > org.locationtech.geomesa.index.geotools.GeoMesaModifyFeatureWriter$class.write(GeoMesaFeatureWriter.scala:236)
> >     at 
> > org.locationtech.geomesa.accumulo.data.AccumuloModifyFeatureWriter.write(AccumuloFeatureWriter.scala:25)
> >     at 
> > com.incadencecorp.coalesce.framework.persistance.accumulo.AccumuloPersistor.updateFeatureIfExists(AccumuloPersistor.java:1717)
> >     at 
> > com.incadencecorp.coalesce.framework.persistance.accumulo.AccumuloPersistor.addNewFeatureForRecordSet(AccumuloPersistor.java:1499)
> >     at 
> > com.incadencecorp.coalesce.framework.persistance.accumulo.AccumuloPersistor.persistEntitySearchData(AccumuloPersistor.java:1337)
> >     at 
> > com.incadencecorp.coalesce.framework.persistance.accumulo.AccumuloPersistor.persistEntityObject(AccumuloPersistor.java:1144)
> >     at 
> > com.incadencecorp.coalesce.framework.persistance.accumulo.AccumuloPersistor.flattenObject(AccumuloPersistor.java:1057)
> >     at 
> > com.incadencecorp.coalesce.framework.persistance.CoalescePersistorBase.saveEntity(CoalescePersistorBase.java:99)
> >     at 
> > com.incadencecorp.coalesce.framework.CoalesceFramework.saveCoalesceEntity(CoalesceFramework.java:451)
> >     at 
> > com.incadencecorp.oe.ingest.reports.Reports_Consumer.run(Reports_Consumer.java:83)
> >     at java.lang.Thread.run(Thread.java:745)

--
========= mailto:dboyd@xxxxxxxxxxxxxxxxx ============
David W. Boyd
VP,  Data Solutions
10432 Balls Ford, Suite 240
Manassas, VA 20109
office:   +1-703-552-2862
cell:     +1-703-402-7908
============== http://www.incadencecorp.com/ ============
ISO/IEC JTC1 WG9, editor ISO/IEC 20547 Big Data Reference Architecture
Chair ANSI/INCITS TC Big Data
Co-chair NIST Big Data Public Working Group Reference Architecture
First Robotic Mentor - FRC, FTC - www.iliterobotics.org
Board Member- USSTEM Foundation - www.usstem.org

The information contained in this message may be privileged
and/or confidential and protected from disclosure.
If the reader of this message is not the intended recipient
or an employee or agent responsible for delivering this message
to the intended recipient, you are hereby notified that any
dissemination, distribution or copying of this communication
is strictly prohibited.  If you have received this communication
in error, please notify the sender immediately by replying to
this message and deleting the material from any computer.