That’s not a really good solution as it disrupts other people
and makes it difficult to release changes that do need to be released,
especially if it takes a while to iron out potential problems. What do people
do to test structural changes (changes to features and/or build)?
From:
wtp-dev-bounces@xxxxxxxxxxx [mailto:wtp-dev-bounces@xxxxxxxxxxx] On Behalf
Of Helen Zhang
Sent: Thursday, February 21, 2008 3:02 PM
To: wtp-dev@xxxxxxxxxxx
Subject: RE: [wtp-dev] Please give it a try -> WTP Bach Build
instructions
Hi Konstantin,
The easiest way to do this is to committing your changes in to HEAD, and then
do an N build instead of an I build, specifying the project wtp-R3.0-N.
Contents in N build should be similar to that of an I build, and you'd
probably want to know if it works in a N build as well... : )
Regards,
Helen Zhang
Release Engineer, Project Manager
Rational Architecture Management Project Management Office
Eclipse Webtools Platform (WTP)
IBM Toronto Software Lab | 8200 Warden Ave. | Markham | L6G 1C7
Email: hjzhang@xxxxxxxxxx | Phone: 905-413-3443 | T/L: 969-3443
"Konstantin
Komissarchik" <kosta@xxxxxxx>
Sent by:
wtp-dev-bounces@xxxxxxxxxxx
02/21/2008
03:51 PM
Please respond to
"General discussion of project-wide or architectural issues."
<wtp-dev@xxxxxxxxxxx>
|
|
To
|
"General
discussion of project-wide or architectural issues."
<wtp-dev@xxxxxxxxxxx>
|
cc
|
|
Subject
|
RE:
[wtp-dev] Please give it a try -> WTP Bach Build instructions
|
|
Helen,
I
was able to run a WTP build using these instructions. Thanks! Now I am trying
to do a build with some local changes (to test those changes). Basically, I
want to skip the whole "get stuff from cvs" phase and just build what
I have. I do want to get as far as generating the build results page, etc. Any
idea, how I could do that?
-
Konstantin
From:
wtp-dev-bounces@xxxxxxxxxxx [mailto:wtp-dev-bounces@xxxxxxxxxxx] On Behalf
Of Helen Zhang
Sent: Thursday, February 21, 2008 12:23 PM
To: wtp-dev@xxxxxxxxxxx
Subject: Re: [wtp-dev] Please give it a try -> WTP Bach Build
instructions
Thank you for trying Naci.
I've updated the wiki page with your suggestions. As well as to comment
out a line in the ant.sh file, let me know if you can get further into
the build Thanks!
Regards,
Helen
Zhang
Release Engineer, Project Manager
Rational Architecture Management Project Management Office
Eclipse Webtools Platform (WTP)
IBM Toronto Software Lab | 8200 Warden Ave. | Markham | L6G 1C7
Email: hjzhang@xxxxxxxxxx | Phone: 905-413-3443 | T/L: 969-3443
Naci
Dai <naci.dai@xxxxxxxxxxxxx>
Sent by: wtp-dev-bounces@xxxxxxxxxxx
02/12/2008
09:46 AM
Please respond to
"General discussion of project-wide or architectural issues."
<wtp-dev@xxxxxxxxxxx>
|
|
To
|
"General
discussion of project-wide or architectural issues."
<wtp-dev@xxxxxxxxxxx>
|
cc
|
|
Subject
|
Re:
[wtp-dev] Please give it a try -> WTP Bach Build instructions
|
|
Hi Helen,
Thank you for documenting the build. I tried your instructions on a SUSE
Linux 10.1. Here is as far as I could get I took some notes. I will try
more and report :-)
-------------
Just a personal preference - But I think it would be better to call it local
builds as opposed to batch builds
Step 1) Do I need JDK 1.5 or 1.4? It would be good to clarify why
they are both needed.
It would be better to say 2.0.x
stream requires...
Step 2) The instructions assume that the build machine is a linux box. I
think it would be quite hard ro run it elsewhere. It would be good to
make a note of that and maybe provide pointers for people who would like to try
to build it on windows (i.e get cvs, unzip etc, put it on your path etc.)
Of course they will have to convert all the shell scripts.
Step 3) Checkout failed as described on the wiki
cvs [export aborted]: absolute pathnames invalid for server (specified
`/home/ndai/wtp-build
needed to use a relative path:
cd /home/ndai/wtp-build
cvs -Q -f -d :pserver:anonymous@xxxxxxxxxxxxxxx:/cvsroot/webtools export -d
./releng.control -r HEAD webtools.releng/releng.control
Step 4) I did copy the localBuild files to ../local-props made the mods
- I was under the impression that I needed to copy commonVariations.shsource
but I realized later it was not the case.
Step 5) ant.sh is not executable when you export from cvs, need to make it
executable (chmod +x)
And running the command caused an error message:
./ant.sh: line 17: commonVariations.shsource: No such file or directory
Checking the file, I defined the environment variable RELENG_CONTROL and got a
little further but ended with other error messages (primarily complaining
about Xvfb - and Java Home
ndai@killbill:~/wtp-build/releng.control>
./ant.sh –f cc_project_build.xml –Dprojectname=wtp-R3.0-I
~/wtp-build/releng.control ~/wtp-build/releng.control
Project Home: /home/ndai/wtp-build/releng.control
Build Home: /home/ndai/wtp-build
DISPLAY: 127.0.0.1:1.0
JAVA_4_HOME: /usr/lib/jvm/java-1_4_2-sun-1.4.2.16
JAVA_5_HOME: /usr/java/jdk1.5.0_14
ANT_HOME: /home/ndai/dev/apache-ant-1.7.0/
PATH:
/home/ndai/dev/apache-ant-1.7.0//bin:/usr/java/jdk1.5.0_14/bin:/home/ndai/dev/apache-maven-2.0.8/bin:/home/ndai/dev/apache-ant-1.7.0/bin:/opt/ibm/db2/V9.5/bin:/usr/local/pgsql/bin:/home/ndai/dev/apache-maven-2.0.8/bin:/home/ndai/dev/apache-maven-2.0.8/bin:/home/ndai/dev/apache-ant-1.7.0/bin:/opt/ibm/db2/V9.5/bin:/usr/local/pgsql/bin:/home/ndai/dev/apache-maven-2.0.8/bin:/home/ndai/dev/apache-maven-2.0.8/bin:/home/ndai/dev/apache-ant-1.7.0/bin:/opt/ibm/db2/V9.5/bin:/home/ndai/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/lib/jvm/jre/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:/opt/novell/iprint/bin
BASEOS: linux
BASEWS: gtk
BASEARCH: x86
LOCAL_BUILD_PROPERTIES_DIR: /home/ndai/wtp-build/localprops
remember to check that X virtual frame buffer is running for
headless JUnit testing
ndai 23597 23585 0 14:27 pts/0 00:00:00 grep
Xvfb
~/wtp-build/releng.control
: command not found
Error: JAVA_HOME is not defined correctly.
/bin/javaot execute /usr/lib/jvm/java-1_4_2-sun-1.4.2.16
Hi there,
Here's some instructions on how to setup a WTP batch build locally. Please
give it a try and see if these instructions work on your local box, and
any feedback is welcome (feel free to make updates on the wiki directly).
Please post questions on wtp-releng for any clarifications. Thank you!
http://wiki.eclipse.org/WTP_Batch_Build
Regards,
Helen Zhang
Release Engineer, Project Manager
Rational Architecture Management Project Management Office
Eclipse Webtools Platform (WTP)
IBM Toronto Software Lab | 8200 Warden Ave. | Markham | L6G 1C7
Email: hjzhang@xxxxxxxxxx
| Phone: 905-413-3443 | T/L: 969-3443
_______________________________________________
wtp-dev mailing list
wtp-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/wtp-dev
_______________________________________________
wtp-dev mailing list
wtp-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/wtp-dev
Notice: This email message, together with any attachments, may contain
information of BEA Systems, Inc., its subsidiaries and affiliated entities,
that may be confidential, proprietary, copyrighted and/or legally privileged,
and is intended solely for the use of the individual or entity named in this
message. If you are not the intended recipient, and have received this message
in error, please immediately return this by email and then delete it._______________________________________________
wtp-dev mailing list
wtp-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/wtp-dev