| Re: [udig-dev] Eclipse4 testing |
Just noticed this now, will check it out when I get a moment.
Good you found the problem!
> On Oct 22, 2014, at 7:00 AM, Tom Schindl <tom.schindl@xxxxxxxxxxxxxxx> wrote:
>
> Hi,
>
> I tracked down the problem of the editor actions not showing up as desired.
>
> The bug is in the compat layer which does not honor
> "EditorActionBarContributor#contributeToCoolBar" hence the items don't
> show up. See https://bugs.eclipse.org/bugs/show_bug.cgi?id=448365
>
> The only current work around - not sure it has any - I've pushed my
> change to
> https://github.com/BestSolution-at/uDig/commit/90f5e916409f734f90bcffc6a56d9f59d25806ff
>
> Tom
>
>> On 21.10.14 13:23, Tom Schindl wrote:
>> BTW it looks like the walk-through and Quickstart Links on the website
>> are broken!
>>
>> Tom
>>
>>> On 21.10.14 13:09, Tom Schindl wrote:
>>> Hi,
>>>
>>> Jody showed me how to reproduce the problem but I haven't yet been able
>>> to find the solution (although i had it on my list for last week).
>>>
>>> Tom
>>>
>>>> On 21.10.14 12:38, Moser-Spitzenstaetter Ludwig wrote:
>>>> How did your Hangout end?
>>>>
>>>>
>>>>
>>>> *Bakk. Techn. Ludwig M. Spitzenstätter*
>>>>
>>>> Naturwissenschaftliche Sammlungen
>>>>
>>>>
>>>>
>>>> *Tiroler Landesmuseen-Betriebsgesellschaft m.b.H.
>>>> *Feldstrasse 11a, 6020 Innsbruck
>>>> Tel +43 512 594 89-425 Fax DW -440__
>>>>
>>>> _l.spitzenstaetter@tiroler-landesmuseen.at_
>>>>
>>>> www.tiroler-landesmuseen.at <http://www.tiroler-landesmuseen.at> |
>>>> www.biooffice.at <http://www.biooffice.at/>
>>>>
>>>>
>>>>
>>>> *Von:*udig-dev-bounces@xxxxxxxxxxxxxxxx
>>>> [mailto:udig-dev-bounces@xxxxxxxxxxxxxxxx] *Im Auftrag von *Tom Schindl
>>>> *Gesendet:* Mittwoch, 08. Oktober 2014 19:32
>>>> *An:* uDig project developer discussion
>>>> *Betreff:* Re: [udig-dev] Eclipse4 testing
>>>>
>>>>
>>>>
>>>> Sure will update tomorrow
>>>>
>>>> Von meinem iPhone gesendet
>>>>
>>>>
>>>> Am 08.10.2014 um 19:23 schrieb Jody Garnett <jody.garnett@xxxxxxxxx
>>>> <mailto:jody.garnett@xxxxxxxxx>>:
>>>>
>>>> Thanks Tom, you managed to hit the Canadian holiday of thanksgiving
>>>> (we are further north then the US so we have our fall harvest a
>>>> month earlier).
>>>>
>>>>
>>>>
>>>> Could we bump that back a day :)
>>>>
>>>>
>>>> Jody Garnett
>>>>
>>>>
>>>>
>>>> On Wed, Oct 8, 2014 at 7:18 AM, Tom Schindl
>>>> <tom.schindl@xxxxxxxxxxxxxxx <mailto:tom.schindl@xxxxxxxxxxxxxxx>>
>>>> wrote:
>>>>
>>>> Hi,
>>>>
>>>> I've create a google hangout for Monday 13th of October at 19:00 CEST is
>>>> this Ok for you?
>>>>
>>>> Others are naturally free to join
>>>> https://plus.google.com/u/0/events/c8vdan4315df4q5mppacvj4rfng
>>>>
>>>> Tom
>>>>
>>>>> On 06.10.14 19:43, Jody Garnett wrote:
>>>>> Morning Tom,
>>>>>
>>>>> Would you like to invite me (and any other interested parties) to a
>>>>> google hangout (using world clock meeting planner
>>>> <http://www.timeanddate.com/worldclock/meetingtime.html?month=10&day=7&year=2014&p1=87&p2=1091&iv=0>
>>>>> is a good way to establish a time).
>>>>>
>>>>> The issues (and test plan) are the same as reported earlier - going
>>>>> through walkthrough 1 and walkthrough 2 resulted in two primary
>>>> issues:
>>>>>
>>>>> 1) map editor navigational controls (zoom to extent and similar) were
>>>>> not displayed in the toolbar. They show up in the menubar, so we are
>>>>> probably looking a straightforward migration issues?
>>>>>
>>>>> 2) user interface getting out of sync with EMF model used for
>>>> projects /
>>>>> maps / layers.
>>>>>
>>>>> If we can arrange a hangout I would be happy to share a screen and
>>>> step
>>>>> through walkthrough 1 and walkthrough 2 showing where the above two
>>>>> issues occur.
>>>>>
>>>>> Notes:
>>>>> - I am using uDig 1.4.0 as a baseline to ensure any regressions are a
>>>>> result of migration to Eclipse 4.
>>>>> - uDig master has migrated to GeoTools 11.2 - this is an orthogonal
>>>>> change with surprisingly few lines of code changed (so chances are
>>>>> rebasing your branch against master will be seamless).
>>>>>
>>>>> --
>>>>> Jody
>>>>>
>>>>> Jody Garnett
>>>>>
>>>>> On Mon, Oct 6, 2014 at 3:04 AM, Tom Schindl
>>>> <tom.schindl@xxxxxxxxxxxxxxx <mailto:tom.schindl@xxxxxxxxxxxxxxx>
>>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx>>> wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> Having returned from JavaOne I'm now available for a testing
>>>> session
>>>>> with Jody so that he can show me areas not yet working and I
>>>> can finally
>>>>> fix them.
>>>>>
>>>>> Tom
>>>>>
>>>>>> On 06.10.14 10:44, Moser-Spitzenstaetter Ludwig wrote:
>>>>>> Hello,
>>>>>>
>>>>>>
>>>>>>
>>>>>> I’m waiting for a result to get uDig started up within our
>>>> product, but
>>>>>> for this i wait for a confimration that it is working
>>>> correctly (o rat
>>>>>> least most of it)
>>>>>>
>>>>>>
>>>>>>
>>>>>> So whats the current status?
>>>>>>
>>>>>>
>>>>>>
>>>>>> Thanks in advance
>>>>>>
>>>>>>
>>>>>>
>>>>>> *Bakk. Techn. Ludwig M. Spitzenstätter*
>>>>>>
>>>>>> Naturwissenschaftliche Sammlungen
>>>>>>
>>>>>>
>>>>>>
>>>>>> *Tiroler Landesmuseen-Betriebsgesellschaft m.b.H.
>>>>>> *Feldstrasse 11a, 6020 Innsbruck
>>>>>> Tel +43 512 594 89-425 <tel:%2B43%20512%20594%2089-425>
>>>> <tel:%2B43%20512%20594%2089-425> Fax DW
>>>>> -440__
>>>>>>
>>>>>> _l.spitzenstaetter@xxxxxxxxxxxxxxxxxxxxxxx
>>>> <mailto:l.spitzenstaetter@xxxxxxxxxxxxxxxxxxxxxxx>_
>>>>>>
>>>>>> www.tiroler-landesmuseen.at
>>>> <http://www.tiroler-landesmuseen.at>
>>>> <http://www.tiroler-landesmuseen.at>
>>>>> <http://www.tiroler-landesmuseen.at> |
>>>>>> www.biooffice.at <http://www.biooffice.at>
>>>> <http://www.biooffice.at> <http://www.biooffice.at/>
>>>>>>
>>>>>>
>>>>>>
>>>>>> *Von:*udig-dev-bounces@xxxxxxxxxxxxxxxx
>>>> <mailto:udig-dev-bounces@xxxxxxxxxxxxxxxx>
>>>>> <mailto:udig-dev-bounces@xxxxxxxxxxxxxxxx
>>>> <mailto:udig-dev-bounces@xxxxxxxxxxxxxxxx>>
>>>>>> [mailto:udig-dev-bounces@xxxxxxxxxxxxxxxx
>>>> <mailto:udig-dev-bounces@xxxxxxxxxxxxxxxx>
>>>>> <mailto:udig-dev-bounces@xxxxxxxxxxxxxxxx
>>>> <mailto:udig-dev-bounces@xxxxxxxxxxxxxxxx>>] *Im Auftrag von *Jody
>>>>> Garnett
>>>>>> *Gesendet:* Donnerstag, 28. August 2014 21:13
>>>>>> *An:* Tom Schindl
>>>>>> *Cc:* uDig project developer discussion
>>>>>> *Betreff:* Re: [udig-dev] Eclipse4 testing
>>>>>>
>>>>>>
>>>>>>
>>>>>> Note I want to ensure you (like any developer) gets paid -
>>>> so we can use
>>>>>> this test plan against 1.4.0 to ensure we have not
>>>> misidentified any
>>>>>> bugs as regressions brought on by Luna.
>>>>>>
>>>>>> --
>>>>>>
>>>>>> Jody
>>>>>>
>>>>>>
>>>>>> Jody Garnett
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Thu, Aug 28, 2014 at 12:11 PM, Jody Garnett
>>>> <jody.garnett@xxxxxxxxx <mailto:jody.garnett@xxxxxxxxx>
>>>> <mailto:jody.garnett@xxxxxxxxx <mailto:jody.garnett@xxxxxxxxx>>
>>>>>> <mailto:jody.garnett@xxxxxxxxx
>>>> <mailto:jody.garnett@xxxxxxxxx> <mailto:jody.garnett@xxxxxxxxx
>>>> <mailto:jody.garnett@xxxxxxxxx>>>> wrote:
>>>>>>
>>>>>> Given that we are working across different weeks /
>>>> availability /
>>>>>> timezones we should make a test plan that both you and your
>>>> customer can
>>>>>> sign off on.
>>>>>>
>>>>>>
>>>>>>
>>>>>> Normally we use the getting started tutorials as our test
>>>> plan for each
>>>>>> release (these tutorials are specific about what button to
>>>> push when).
>>>>>> It is aimed as an intro but I understand if it requires
>>>> background
>>>>>> knowledge on mapping that makes it difficult to follow.
>>>>>>
>>>>>>
>>>>>>
>>>>>> I will find a wiki page and write up my previous
>>>> email/results in the
>>>>>> form of a test plan so we can refer to specific problem
>>>> steps (sigh).
>>>>>>
>>>>>>
>>>>>>
>>>>>> Is there any wiki that you have access to for this purpose?
>>>> Or should we
>>>>>> set up a shared google doc?
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Jody Garnett
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Thu, Aug 28, 2014 at 11:56 AM, Tom Schindl
>>>>>> <tom.schindl@xxxxxxxxxxxxxxx
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx>
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx>>
>>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx>
>>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx>>>> wrote:
>>>>>>
>>>>>> Fine with me! If you have steps for reproduction just sent
>>>> them over and
>>>>>> I'll try to reproduce myself ;-)
>>>>>>
>>>>>> Tom
>>>>>>
>>>>>>
>>>>>>> On 28.08.14 19:33, Jody Garnett wrote:
>>>>>>> That is the week of foss4g so it will need to be after that.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> On Aug 28, 2014, at 4:00 AM, Tom Schindl
>>>> <tom.schindl@xxxxxxxxxxxxxxx <mailto:tom.schindl@xxxxxxxxxxxxxxx>
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx>>
>>>>
>>>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx>
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx>>>>
>>>>> wrote:
>>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> I'm going to be on holiday next week and have to finish of
>>>> some other
>>>>>>>> work items so I guess we need to postpone this to after
>>>> the my holiday.
>>>>>>>> Would Thursday 11th Sep work for you?
>>>>>>>>
>>>>>>>> Tom
>>>>>>>>
>>>>>>>>> On 26.08.14 08:37, Jody Garnett wrote:
>>>>>>>>> Hello Tom:
>>>>>>>>>
>>>>>>>>> I would be happy to screen share (Skype or google
>>>> hangout) and
>>>>>>>>> demonstrate the issues I encountered. Please let me know
>>>> when you are
>>>>>>>>> available.
>>>>>>>>>
>>>>>>>>> I did try and take notes with my initial reports on the
>>>> data sets and
>>>>>>>>> steps used, hopefuly we can retrace these steps together.
>>>>>>>>>
>>>>>>>>> Jody
>>>>>>>>>
>>>>>>>>> Jody Garnett
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Aug 20, 2014 at 3:56 AM, Tom Schindl
>>>>>>>>> <tom.schindl@xxxxxxxxxxxxxxx
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx>
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx>>
>>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx>
>>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx>>>
>>>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx>
>>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx>>
>>>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx>
>>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx
>>>> <mailto:tom.schindl@xxxxxxxxxxxxxxx>>>>> wrote:
>>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> I think I'll have time this Friday afternoon to look
>>>> at some
>>>>> of the
>>>>>>>>> problems but for that I need a description how I can
>>>>> reproduce the
>>>>>>>>> problem.
>>>>>>>>>
>>>>>>>>> It's naturally also possible that we setup a screensharing
>>>>> session so
>>>>>>>>> that you can demostrate me the problem.
>>>>>>>>>
>>>>>>>>> Tom
>>>>>>>>>
>>>>>>>>>> On 16.08.14 01:24, Jody Garnett wrote:
>>>>>>>>>> Just double checking we are sorting out E4 issues with
>>>> Tom before
>>>>>>>>>> upgrading GeoTools. This allows us to be assured the
>>>> issues are
>>>>>>>>> entirely
>>>>>>>>>> due to change RCP, EMF, etc... and not due to change of
>>>> underlying
>>>>>>>>>> geotools library.
>>>>>>>>>>
>>>>>>>>>> Now we are in position to test udig on E4 platform and
>>>>> collaborate
>>>>>>>>>> on branch
>>>> https://github.com/uDig/udig-platform/tree/luna-support to
>>>>> upgrade
>>>>>>>>>> geotools.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Tom are you able to track that branch? (and possibly
>>>> issue pull
>>>>>>>>> requests
>>>>>>>>>> against it?)
>>>>>>>>>>
>>>>>>>>>> I tried to report several issues with the branch that
>>>> did not make
>>>>>>>>> your
>>>>>>>>>> list Frank, adding them below with a (+)
>>>>>>>>>>
>>>>>>>>>> Next steps (for luna-support):
>>>>>>>>>> * testing phase with the current alpha2
>>>>>>>>>> (+) ensure "action tools" show up in toolbar
>>>>>>>>>> (+) restart issues around map save/load
>>>>>>>>>> * fix #E4 upgrade bugs together with Tom
>>>>>>>>>> * merge this branch back to master
>>>>>>>>>>
>>>>>>>>>> Upgrade GeoTools:
>>>>>>>>>> (+) Table View fix
>>>>>>>>>> * afterwards we can
>>>>>>>>>> merge
>>>>> https://github.com/uDig/udig-platform/tree/udig-gt-11-snapshot
>>>> into
>>>>>>>>> master
>>>>>>>>>> as well
>>>>>>>>>> * creating an other Alpha release to test with
>>>>>>>>>> * finalize uDig 2.0.0 (with installer that contain JRE
>>>> and so
>>>>> on) -
>>>>>>>>>> which will not really be a LocationTech release because of
>>>>> IP/CQ stuff
>>>>>>>>>>
>>>>>>>>>> LocationTech Release:
>>>>>>>>>> (+) Change to GeoTools 11.2 (this is the one I am getting
>>>>> reviewed for
>>>>>>>>>> geogig)
>>>>>>>>>>
>>>>>>>>>> * next goal to make a LocationTech Release
>>>>>>>>>> * bundles and features hosted at LoactionTech
>>>> (maven/p2
>>>>> update
>>>>>>>>>> sites)
>>>>>>>>>> * installers builds we can still provide from
>>>>> Refractions based
>>>>>>>>>> on Release from LocationTech (sources at github,
>>>> hosting of
>>>>> final
>>>>>>>>>> package installers and JRE's at Refractions research)
>>>>>>>>>>
>>>>>>>>>> Does this makes sense to you? If so, I would like to
>>>> create
>>>>>>>>> tasks -
>>>>>>>>>> bugzilla or still in JIRA? What would yoe prefer
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Bugzilla, GitHub or Jira. I am personally terrible at using
>>>>> Bugzilla
>>>>>>>>>> but perhaps that is just me? I do not mind much either way.
>>>>>>>>>>
>>>>>>>>>> Jody
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> udig-dev mailing list
>>>>
>>>>>> udig-dev@xxxxxxxxxxxxxxxx <mailto:udig-dev@xxxxxxxxxxxxxxxx>
>>>> <mailto:udig-dev@xxxxxxxxxxxxxxxx <mailto:udig-dev@xxxxxxxxxxxxxxxx>>
>>>>>> To change your delivery options, retrieve your password, or
>>>>> unsubscribe from this list, visit
>>>>>> https://locationtech.org/mailman/listinfo/udig-dev
>>>>>
>>>>> _______________________________________________
>>>>> udig-dev mailing list
>>>>> udig-dev@xxxxxxxxxxxxxxxx <mailto:udig-dev@xxxxxxxxxxxxxxxx>
>>>> <mailto:udig-dev@xxxxxxxxxxxxxxxx <mailto:udig-dev@xxxxxxxxxxxxxxxx>>
>>>>
>>>>> To change your delivery options, retrieve your password, or
>>>>> unsubscribe from this list, visit
>>>>> https://locationtech.org/mailman/listinfo/udig-dev
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> udig-dev mailing list
>>>>> udig-dev@xxxxxxxxxxxxxxxx <mailto:udig-dev@xxxxxxxxxxxxxxxx>
>>>>> To change your delivery options, retrieve your password, or
>>>> unsubscribe from this list, visit
>>>>> https://locationtech.org/mailman/listinfo/udig-dev
>>>>
>>>> _______________________________________________
>>>> udig-dev mailing list
>>>> udig-dev@xxxxxxxxxxxxxxxx <mailto:udig-dev@xxxxxxxxxxxxxxxx>
>>>> To change your delivery options, retrieve your password, or
>>>> unsubscribe from this list, visit
>>>> https://locationtech.org/mailman/listinfo/udig-dev
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> udig-dev mailing list
>>>> udig-dev@xxxxxxxxxxxxxxxx <mailto:udig-dev@xxxxxxxxxxxxxxxx>
>>>> To change your delivery options, retrieve your password, or
>>>> unsubscribe from this list, visit
>>>> https://locationtech.org/mailman/listinfo/udig-dev
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> udig-dev mailing list
>>>> udig-dev@xxxxxxxxxxxxxxxx
>>>> To change your delivery options, retrieve your password, or unsubscribe from this list, visit
>>>> https://locationtech.org/mailman/listinfo/udig-dev
>>>
>>> _______________________________________________
>>> udig-dev mailing list
>>> udig-dev@xxxxxxxxxxxxxxxx
>>> To change your delivery options, retrieve your password, or unsubscribe from this list, visit
>>> https://locationtech.org/mailman/listinfo/udig-dev
>>
>> _______________________________________________
>> udig-dev mailing list
>> udig-dev@xxxxxxxxxxxxxxxx
>> To change your delivery options, retrieve your password, or unsubscribe from this list, visit
>> https://locationtech.org/mailman/listinfo/udig-dev
>
> _______________________________________________
> udig-dev mailing list
> udig-dev@xxxxxxxxxxxxxxxx
> To change your delivery options, retrieve your password, or unsubscribe from this list, visit
> https://locationtech.org/mailman/listinfo/udig-dev
_______________________________________________
udig-dev mailing list
udig-dev@xxxxxxxxxxxxxxxx
To change your delivery options, retrieve your password, or unsubscribe from this list, visit
https://locationtech.org/mailman/listinfo/udig-dev