Re: [paho-dev] Paho MQTT Embedded C Client Support

["Mike Tran" <miketran@xxxxxxxxxx>]

Hi Michell,

You cannot use the sample code "as
is"  - It depends on the setup / configuration of broker.  For
example, when I was testing with messagsight.demos.ibm.com , I had to remove
username and password:
        data.clientID.cstring
= "miketran-pub";
        data.keepAliveInterval
= 20;
        data.cleansession
= 1;
        //data.username.cstring
= "testuser";
        //data.password.cstring
= "testpassword";
        data.MQTTVersion
= 4;

Sorry, there is no checking the sample
code. You will need to write more code for check for success / failure.

--
Regards,
Mike Tran
Phone: 512-286-8959 (T/L: 363-8959)
IBM Austin, Texas



From:      
 Michell Castaño <mcastano@xxxxxxxxxxxx>
To:      
 Mike Tran/Austin/IBM@IBMUS
Cc:      
 paho-dev@xxxxxxxxxxx
Date:      
 09/27/2016 01:45 PM
Subject:    
   Re: [paho-dev]
Paho MQTT Embedded C Client Support

---

Hi, Mike

I have another client to subscribe to the topic "LaHermosa/#".
This topic is listening with the broker "broker.hivemq.com"
in the port 1883, so:

The client qos0pub shows a "succesfully published"
but in the broker subscriber do not appear nothing.

Now, I use another client, this time a websocket client
at the same broker, and this are the results:

Thanks, again for your kind attention.


2016-09-27 12:04 GMT-05:00 Michell Castaño <mcastano@xxxxxxxxxxxx>:
Hi, Mike

For the Paho Embedded C Client I am using the next library:

https://github.com/eclipse/paho.mqtt.embedded-c/tree/master/MQTTPacket/samples

I work in C and I obtained this results:

Perhaps, do you know, why don't running?
Thanks, again for your kind attention.



2016-09-27 10:53 GMT-05:00 Mike Tran <miketran@xxxxxxxxxx>:
Hello Michell,

There are some example code that may help you get started with the Paho
Embedded C client.

If you are using the C++ library: https://github.com/eclipse/paho.mqtt.embedded-c/tree/master/MQTTClient/samples/linux

If you are using the C libray: https://github.com/eclipse/paho.mqtt.embedded-c/tree/master/MQTTClient/samples/linux

I have used the Paho Embedded C client on a few devices.  I have not
seen any publish issues. 

--
Regards,
Mike Tran




From:        Michell
Castaño <mcastano@xxxxxxxxxxxx>
To:        paho-dev@xxxxxxxxxxx
Cc:        Michell
Castaño <mcastano@xxxxxxxxxxxx>
Date:        09/27/2016
09:50 AM
Subject:        [paho-dev]
Paho MQTT Embedded C Client Support
Sent by:        paho-dev-bounces@xxxxxxxxxxx

---

Good Morning
Members of Paho-dev

Best Regard

 

I'm Michell from Colombiaand I have been testing the Embedded MQTT Client C library (https://eclipse.org/paho/clients/c/embedded/) but although I obtained a successful test with the pub0sub1 sample, I can not tell the same with qos0pub sample,because this do not publish the payload required by me, into the broker of testing.

Please, do you can support me with this?

Beforehand, thanks a lot for your kind attention.

See you son._______________________________________________
paho-dev mailing list
paho-dev@xxxxxxxxxxx
To change your delivery options, retrieve your password, or unsubscribe from this list, visit
https://dev.eclipse.org/mailman/listinfo/paho-dev