[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
[
List Home]
|
[dsdp-tm-dev] RE: dsdp-tm-dev Digest, Vol 50, Issue 3
|
Vrushali,
timeout --> how long RSE will try to make a connection before it gives up.
If you can connect, then timeout is OK for you.
keepalive --> after what time of inactivity RSE will send a keepalive packet
to keep the server from closing the seemingly inactive connection.
The default for keepalive is 300 (5 minutes). Your server may require 40
(40 seconds) to make sure it doesn't close the connection after a minute.
Cheers,
--
Martin Oberhuber, Senior Member of Technical Staff, Wind River
Target Management Project Lead, DSDP PMC Member
http://www.eclipse.org/dsdp/tm
> -----Original Message-----
> From: vrushali babar [mailto:vrush_com@xxxxxxxxx]
> Sent: Wednesday, September 23, 2009 10:11 AM
> To: dsdp-tm-dev@xxxxxxxxxxx; Oberhuber, Martin
> Subject: Re: dsdp-tm-dev Digest, Vol 50, Issue 3
>
> Hi,
>
> I'm litle confussed between two terms here,
> 1 - timeout
> 2 - keepalive
>
> I'm not much clear about the difference between two.
> Once I connect to Remote server,I need the connection to be
> up for an hour.
> I tried setting different values for timeout and keepalive
> but nothing worked. So is it possible to explain the meanings
> of above mentioned two terms and possible settings to keep
> the connection up for an hour?
>
> Thanks a lot in advance,
>
> Vrushali.
>
> --- On Thu, 9/17/09, dsdp-tm-dev-request@xxxxxxxxxxx
> <dsdp-tm-dev-request@xxxxxxxxxxx> wrote:
>
> > From: dsdp-tm-dev-request@xxxxxxxxxxx
> <dsdp-tm-dev-request@xxxxxxxxxxx>
> > Subject: dsdp-tm-dev Digest, Vol 50, Issue 3
> > To: dsdp-tm-dev@xxxxxxxxxxx
> > Date: Thursday, September 17, 2009, 8:22 PM
> > Send dsdp-tm-dev mailing list
> > submissions to
> > dsdp-tm-dev@xxxxxxxxxxx
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > or, via email, send a message with subject or body 'help'
> > to
> > dsdp-tm-dev-request@xxxxxxxxxxx
> >
> > You can reach the person managing the list at
> > dsdp-tm-dev-owner@xxxxxxxxxxx
> >
> > When replying, please edit your Subject line so it is more
> > specific
> > than "Re: Contents of dsdp-tm-dev digest..."
> >
> >
> > Today's Topics:
> >
> > 1. Re: dsdp-tm-dev Digest, Vol 50, Issue
> > 2 (vrushali babar)
> > 2. RE: Re: dsdp-tm-dev Digest, Vol 50,
> > Issue 2 (Oberhuber, Martin)
> >
> >
> >
> ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Thu, 17 Sep 2009 05:40:53 -0700 (PDT)
> > From: vrushali babar <vrush_com@xxxxxxxxx>
> > Subject: [dsdp-tm-dev] Re: dsdp-tm-dev Digest, Vol 50,
> > Issue 2
> > To: dsdp-tm-dev@xxxxxxxxxxx
> > Message-ID: <39166.58465.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > Content-Type: text/plain; charset=iso-8859-1
> >
> > Hi Martin,
> >
> > Thanks for your reply.
> > I can SSH to remote server by using RSE and even by command
> > line.
> > In case of command line, even if I leave my machine idle
> > for 3-4 hours, my connection remains as it is.
> > But in case of RSE, even if I leave my machine idle for 5
> > mins, whatever connections I've made, I need to reconnect to
> > all of them.
> >
> > To make connection I'm using following code
> >
> >
> >
> >
> > private void connect(final ISubSystem subsys, final
> > IProgressMonitor monitor) {
> > //
> > monitor.beginTask("Connecting", 10);
> > if (!subsys.isConnected()) {
> > final Exception[] exception = new
> > Exception[1];
> > exception[0] = null;
> >
> > Display.getDefault().syncExec(new Runnable() {
> > public void run() {
> > try {
> > ((SubSystem)
> > subsys).promptForPassword();
> > } catch (Exception e)
> > {
> >
> > exception[0] = e;
> > }
> > }
> > });
> > try {
> >
> >
> > subsys.getConnectorService().connect(monitor);
> > } catch (Exception e) {
> > e.printStackTrace();
> > }
> > if (subsys.isConnected()) {
> > // Notify connect status change
> > Display.getDefault().asyncExec(new
> > Runnable() {
> > public void run() {
> > IPropertySet ps[] =
> > subsys.getConnectorService().getPropertySets();
> > for(int i=0
> > ;i<ps.length;i++)
> >
> > System.out.println(i+1 + "\tName" + ps[i].getName());
> >
> >
> > //ps[0].
> >
> >
> > RSECorePlugin.getTheSystemRegistry()
> >
> >
> >
> > .connectedStatusChange(subsys, true, false);
> > }
> > });
> > }
> > }
> > // monitor.done();
> > }
> >
> >
> > With the above code I can work well if I'm not leaving
> > Eclipse instance idle even for 2 mins. But otherwise I need
> > to reconnect.
> > Please suggest if I'm going somewhere wrong or if I need to
> > do anything different.
> >
> > Stuck badly.
> >
> > Thanks a lot in advance,
> > Vrushali.
> >
> >
> >
> > --- On Thu, 9/17/09, dsdp-tm-dev-request@xxxxxxxxxxx
> > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > wrote:
> >
> > > From: dsdp-tm-dev-request@xxxxxxxxxxx
> > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > Subject: dsdp-tm-dev Digest, Vol 50, Issue 2
> > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > Date: Thursday, September 17, 2009, 3:50 PM
> > > Send dsdp-tm-dev mailing list
> > > submissions to
> > > dsdp-tm-dev@xxxxxxxxxxx
> > >
> > > To subscribe or unsubscribe via the World Wide Web,
> > visit
> > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > or, via email, send a message with subject or body
> > 'help'
> > > to
> > > dsdp-tm-dev-request@xxxxxxxxxxx
> > >
> > > You can reach the person managing the list at
> > > dsdp-tm-dev-owner@xxxxxxxxxxx
> > >
> > > When replying, please edit your Subject line so it is
> > more
> > > specific
> > > than "Re: Contents of dsdp-tm-dev digest..."
> > >
> > >
> > > Today's Topics:
> > >
> > > 1. Re: dsdp-tm-dev Digest, Vol 50, Issue
> > > 1 (vrushali babar)
> > > 2. Re: Connection timed out
> > > error...RSEG1058 (vrushali babar)
> > > 3. RE: Re: Connection timed out
> > > error...RSEG1058 (Oberhuber, Martin)
> > >
> > >
> > >
> >
> ----------------------------------------------------------------------
> > >
> > > Message: 1
> > > Date: Wed, 16 Sep 2009 21:29:22 -0700 (PDT)
> > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > Subject: [dsdp-tm-dev] Re: dsdp-tm-dev Digest, Vol
> > 50,
> > > Issue 1
> > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > Message-ID: <327503.2668.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > Content-Type: text/plain; charset=iso-8859-1
> > >
> > >
> > > Hi David,
> > >
> > > I'm using SSH option to make connection. is there any
> > > method by which i can extend the connection timeout
> > range?
> > >
> > > Thanks,
> > > Vrushali.
> > >
> > > --- On Wed, 9/16/09, dsdp-tm-dev-request@xxxxxxxxxxx
> > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > wrote:
> > >
> > > > From: dsdp-tm-dev-request@xxxxxxxxxxx
> > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > Subject: dsdp-tm-dev Digest, Vol 50, Issue 1
> > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > Date: Wednesday, September 16, 2009, 9:30 PM
> > > > Send dsdp-tm-dev mailing list
> > > > submissions to
> > > > dsdp-tm-dev@xxxxxxxxxxx
> > > >
> > > > To subscribe or unsubscribe via the World Wide
> > Web,
> > > visit
> > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > or, via email, send a message with subject or
> > body
> > > 'help'
> > > > to
> > > > dsdp-tm-dev-request@xxxxxxxxxxx
> > > >
> > > > You can reach the person managing the list at
> > > > dsdp-tm-dev-owner@xxxxxxxxxxx
> > > >
> > > > When replying, please edit your Subject line so
> > it is
> > > more
> > > > specific
> > > > than "Re: Contents of dsdp-tm-dev digest..."
> > > >
> > > >
> > > > Today's Topics:
> > > >
> > > > 1. Connection timed out error...RSEG1058
> > > > (vrushali babar)
> > > > 2. Re: Connection timed out
> > > > error...RSEG1058 (David McKnight)
> > > >
> > > >
> > > >
> > >
> >
> ----------------------------------------------------------------------
> > > >
> > > > Message: 1
> > > > Date: Tue, 15 Sep 2009 22:21:40 -0700 (PDT)
> > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > Subject: [dsdp-tm-dev] Connection timed out
> > > > error...RSEG1058
> > > > To: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>
> > > > Message-ID: <749327.98085.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > Content-Type: text/plain; charset=us-ascii
> > > >
> > > > Hi,
> > > >
> > > > I'm using RSE-SDK-3.1 and Eclipse 3.5. I could
> > make
> > > > connection to remote server programmatically but
> > > suffering
> > > > from connection timed out error RSEG1058, saying
> > > 'Connect to
> > > > Remote_server_name was cancelled'.
> > > >
> > > > I tried setting Connection timeout using
> > Preference
> > > page
> > > > (Windows -> Preferences -> Remote Systems
> > ->
> > > Data
> > > > Store) by setting the value to 64800000 but
> > still
> > > doesn't
> > > > seemed to be solving my problem.
> > > > Even after making the change in connection
> > timeout
> > > range,
> > > > i'm getting disconnected with the very short
> > period
> > > of
> > > > time.
> > > >
> > > > So I am in need of some way to set connection
> > timeout
> > > when
> > > > I'm connecting to remote server. Please provide
> > > pointers and
> > > > even anyone could tell me what is the default
> > > timeout?
> > > >
> > > > Thanks in advance,
> > > > Vrushali.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > Message: 2
> > > > Date: Wed, 16 Sep 2009 06:29:23 -0400
> > > > From: David McKnight <dmcknigh@xxxxxxxxxx>
> > > > Subject: Re: [dsdp-tm-dev] Connection timed out
> > > > error...RSEG1058
> > > > To: Target Management developer discussions
> > <dsdp-tm-dev@xxxxxxxxxxx>
> > > > Cc: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>,
> > > > dsdp-tm-dev-bounces@xxxxxxxxxxx
> > > > Message-ID:
> > > >
> <OF8AD2D2CB.5B377555-ON85257633.00398581-85257633.00399F04@xxxxxxxxxx>
> > > > Content-Type: text/plain; charset="us-ascii"
> > > >
> > > > Skipped content of type
> > > multipart/alternative--------------
> > > > next part --------------
> > > > A non-text attachment was scrubbed...
> > > > Name: graycol.gif
> > > > Type: image/gif
> > > > Size: 105 bytes
> > > > Desc: not available
> > > > Url :
> https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
s/20090916/602c221b/graycol.gif
> > > > -------------- next part --------------
> > > > A non-text attachment was scrubbed...
> > > > Name: pic26832.gif
> > > > Type: image/gif
> > > > Size: 1255 bytes
> > > > Desc: not available
> > > > Url :
> https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
s/20090916/602c221b/pic26832.gif
> > > > -------------- next part --------------
> > > > A non-text attachment was scrubbed...
> > > > Name: ecblank.gif
> > > > Type: image/gif
> > > > Size: 45 bytes
> > > > Desc: not available
> > > > Url :
> https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
s/20090916/602c221b/ecblank.gif
> > > >
> > > > ------------------------------
> > > >
> > > > _______________________________________________
> > > > dsdp-tm-dev mailing list
> > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > >
> > > >
> > > > End of dsdp-tm-dev Digest, Vol 50, Issue 1
> > > > ******************************************
> > > >
> > >
> > >
> > >
> > >
> > >
> > > ------------------------------
> > >
> > > Message: 2
> > > Date: Thu, 17 Sep 2009 00:09:05 -0700 (PDT)
> > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > Subject: [dsdp-tm-dev] Re: Connection timed out
> > > error...RSEG1058
> > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > Message-ID: <113449.25932.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > Content-Type: text/plain; charset=iso-8859-1
> > >
> > >
> > > Hi David,
> > >
> > > I'm trying to SSH connection. Looked for any manual
> > setting
> > > available to set connection time out range but didn't
> > find
> > > anything (Whatever I got was for Dstore).
> > > While searching, i came across the following bug id
> > >
> > > https://bugs.eclipse.org/bugs/show_bug.cgi?id=219936
> > >
> > > so looks like there is some solution available.
> > > Till now i have finished following
> > > - getting instance if IHost
> > > - getting related ISubsystem
> > > - Getting credentials if not yet provided and
> > connecting to
> > > remote server
> > >
> > > but stuck at connection time out error.
> > > Can you suggest if there is any method to set
> > connection
> > > time out?
> > > Help would be really grateful.
> > >
> > > Thanks a ton,
> > > Vrushali.
> > >
> > >
> > > --- On Wed, 9/16/09, dsdp-tm-dev-request@xxxxxxxxxxx
> > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > wrote:
> > >
> > > > From: dsdp-tm-dev-request@xxxxxxxxxxx
> > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > Subject: dsdp-tm-dev Digest, Vol 50, Issue 1
> > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > Date: Wednesday, September 16, 2009, 9:30 PM
> > > > Send dsdp-tm-dev mailing list
> > > > submissions to
> > > > dsdp-tm-dev@xxxxxxxxxxx
> > > >
> > > > To subscribe or unsubscribe via the World Wide
> > Web,
> > > visit
> > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > or, via email, send a message with subject or
> > body
> > > 'help'
> > > > to
> > > > dsdp-tm-dev-request@xxxxxxxxxxx
> > > >
> > > > You can reach the person managing the list at
> > > > dsdp-tm-dev-owner@xxxxxxxxxxx
> > > >
> > > > When replying, please edit your Subject line so
> > it is
> > > more
> > > > specific
> > > > than "Re: Contents of dsdp-tm-dev digest..."
> > > >
> > > >
> > > > Today's Topics:
> > > >
> > > > 1. Connection timed out error...RSEG1058
> > > > (vrushali babar)
> > > > 2. Re: Connection timed out
> > > > error...RSEG1058 (David McKnight)
> > > >
> > > >
> > > >
> > >
> >
> ----------------------------------------------------------------------
> > > >
> > > > Message: 1
> > > > Date: Tue, 15 Sep 2009 22:21:40 -0700 (PDT)
> > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > Subject: [dsdp-tm-dev] Connection timed out
> > > > error...RSEG1058
> > > > To: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>
> > > > Message-ID: <749327.98085.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > Content-Type: text/plain; charset=us-ascii
> > > >
> > > > Hi,
> > > >
> > > > I'm using RSE-SDK-3.1 and Eclipse 3.5. I could
> > make
> > > > connection to remote server programmatically but
> > > suffering
> > > > from connection timed out error RSEG1058, saying
> > > 'Connect to
> > > > Remote_server_name was cancelled'.
> > > >
> > > > I tried setting Connection timeout using
> > Preference
> > > page
> > > > (Windows -> Preferences -> Remote Systems
> > ->
> > > Data
> > > > Store) by setting the value to 64800000 but
> > still
> > > doesn't
> > > > seemed to be solving my problem.
> > > > Even after making the change in connection
> > timeout
> > > range,
> > > > i'm getting disconnected with the very short
> > period
> > > of
> > > > time.
> > > >
> > > > So I am in need of some way to set connection
> > timeout
> > > when
> > > > I'm connecting to remote server. Please provide
> > > pointers and
> > > > even anyone could tell me what is the default
> > > timeout?
> > > >
> > > > Thanks in advance,
> > > > Vrushali.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > Message: 2
> > > > Date: Wed, 16 Sep 2009 06:29:23 -0400
> > > > From: David McKnight <dmcknigh@xxxxxxxxxx>
> > > > Subject: Re: [dsdp-tm-dev] Connection timed out
> > > > error...RSEG1058
> > > > To: Target Management developer discussions
> > <dsdp-tm-dev@xxxxxxxxxxx>
> > > > Cc: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>,
> > > > dsdp-tm-dev-bounces@xxxxxxxxxxx
> > > > Message-ID:
> > > >
> <OF8AD2D2CB.5B377555-ON85257633.00398581-85257633.00399F04@xxxxxxxxxx>
> > > > Content-Type: text/plain; charset="us-ascii"
> > > >
> > > > Skipped content of type
> > > multipart/alternative--------------
> > > > next part --------------
> > > > A non-text attachment was scrubbed...
> > > > Name: graycol.gif
> > > > Type: image/gif
> > > > Size: 105 bytes
> > > > Desc: not available
> > > > Url :
> https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
s/20090916/602c221b/graycol.gif
> > > > -------------- next part --------------
> > > > A non-text attachment was scrubbed...
> > > > Name: pic26832.gif
> > > > Type: image/gif
> > > > Size: 1255 bytes
> > > > Desc: not available
> > > > Url :
> https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
s/20090916/602c221b/pic26832.gif
> > > > -------------- next part --------------
> > > > A non-text attachment was scrubbed...
> > > > Name: ecblank.gif
> > > > Type: image/gif
> > > > Size: 45 bytes
> > > > Desc: not available
> > > > Url :
> https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
s/20090916/602c221b/ecblank.gif
> > > >
> > > > ------------------------------
> > > >
> > > > _______________________________________________
> > > > dsdp-tm-dev mailing list
> > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > >
> > > >
> > > > End of dsdp-tm-dev Digest, Vol 50, Issue 1
> > > > ******************************************
> > > >
> > >
> > >
> > >
> > >
> > >
> > > ------------------------------
> > >
> > > Message: 3
> > > Date: Thu, 17 Sep 2009 12:19:41 +0200
> > > From: "Oberhuber, Martin" <Martin.Oberhuber@xxxxxxxxxxxxx>
> > > Subject: RE: [dsdp-tm-dev] Re: Connection timed out
> > > error...RSEG1058
> > > To: "Target Management developer discussions"
> > > <dsdp-tm-dev@xxxxxxxxxxx>
> > > Message-ID:
> > >
> <460801A4097E3D4CA04CC64EE64858480ADD8C80@xxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > Content-Type: text/plain; charset="iso-8859-1"
> > >
> > > Vrushali,
> > >
> > > I doubt that you really have a timeout problem.
> > >
> > > Can you connect your host with some commandline tool
> > > outside
> > > Eclipse? Is sftp-server available on your remote
> > host?
> > >
> > > I suggest that you try the TM-Terminal to connect to
> > your
> > > host.
> > > This just needs a shell and no sftp-server -- and
> > allows
> > > setting
> > > a timeout value directly in its UI.
> > >
> > > RSE also allows setting a timeout value in the
> > connection
> > > wizard
> > > or connection properties, see attached.
> > >
> > > Cheers,
> > > --
> > > Martin Oberhuber, Senior Member of Technical Staff,
> > Wind
> > > River
> > > Target Management Project Lead, DSDP PMC Member
> > > http://www.eclipse.org/dsdp/tm
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: dsdp-tm-dev-bounces@xxxxxxxxxxx
> > >
> > > > [mailto:dsdp-tm-dev-bounces@xxxxxxxxxxx]
> > > On Behalf Of vrushali babar
> > > > Sent: Thursday, September 17, 2009 9:09 AM
> > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > Subject: [dsdp-tm-dev] Re: Connection timed out
> > > error...RSEG1058
> > > >
> > > >
> > > > Hi David,
> > > >
> > > > I'm trying to SSH connection. Looked for any
> > manual
> > > setting
> > > > available to set connection time out range but
> > didn't
> > > find
> > > > anything (Whatever I got was for Dstore).
> > > > While searching, i came across the following bug
> > id
> > > >
> > > > https://bugs.eclipse.org/bugs/show_bug.cgi?id=219936
> > > >
> > > > so looks like there is some solution available.
> > > > Till now i have finished following
> > > > - getting instance if IHost
> > > > - getting related ISubsystem
> > > > - Getting credentials if not yet provided and
> > > connecting to
> > > > remote server
> > > >
> > > > but stuck at connection time out error.
> > > > Can you suggest if there is any method to set
> > > connection time out?
> > > > Help would be really grateful.
> > > >
> > > > Thanks a ton,
> > > > Vrushali.
> > > >
> > > >
> > > > --- On Wed, 9/16/09, dsdp-tm-dev-request@xxxxxxxxxxx
> > >
> > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > wrote:
> > > >
> > > > > From: dsdp-tm-dev-request@xxxxxxxxxxx
> > >
> > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > Subject: dsdp-tm-dev Digest, Vol 50, Issue
> > 1
> > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > Date: Wednesday, September 16, 2009, 9:30
> > PM
> > > > > Send dsdp-tm-dev mailing list
> > > > > submissions to
> > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > >
> > > > > To subscribe or unsubscribe via the World
> > Wide
> > > Web, visit
> > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > or, via email, send a message with subject
> > or
> > > body 'help'
> > > > > to
> > > > > dsdp-tm-dev-request@xxxxxxxxxxx
> > > > >
> > > > > You can reach the person managing the list
> > at
> > > > > dsdp-tm-dev-owner@xxxxxxxxxxx
> > > > >
> > > > > When replying, please edit your Subject line
> > so
> > > it is more
> > > > > specific
> > > > > than "Re: Contents of dsdp-tm-dev
> > digest..."
> > > > >
> > > > >
> > > > > Today's Topics:
> > > > >
> > > > > 1. Connection timed out
> > error...RSEG1058
> > > > > (vrushali babar)
> > > > > 2. Re: Connection timed out
> > > > > error...RSEG1058 (David McKnight)
> > > > >
> > > > >
> > > > >
> > > >
> > >
> >
> ----------------------------------------------------------------------
> > > > >
> > > > > Message: 1
> > > > > Date: Tue, 15 Sep 2009 22:21:40 -0700 (PDT)
> > > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > > Subject: [dsdp-tm-dev] Connection timed out
> > > > > error...RSEG1058
> > > > > To: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > Message-ID: <749327.98085.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > > Content-Type: text/plain; charset=us-ascii
> > > > >
> > > > > Hi,
> > > > >
> > > > > I'm using RSE-SDK-3.1 and Eclipse 3.5. I
> > could
> > > make
> > > > > connection to remote server programmatically
> > but
> > > suffering
> > > > > from connection timed out error RSEG1058,
> > saying
> > > 'Connect to
> > > > > Remote_server_name was cancelled'.
> > > > >
> > > > > I tried setting Connection timeout using
> > > Preference page
> > > > > (Windows -> Preferences -> Remote
> > Systems
> > > -> Data
> > > > > Store) by setting the value to 64800000 but
> > still
> > > doesn't
> > > > > seemed to be solving my problem.
> > > > > Even after making the change in connection
> > > timeout range,
> > > > > i'm getting disconnected with the very
> > short
> > > period of
> > > > > time.
> > > > >
> > > > > So I am in need of some way to set
> > connection
> > > timeout when
> > > > > I'm connecting to remote server. Please
> > provide
> > > pointers and
> > > > > even anyone could tell me what is the
> > default
> > > timeout?
> > > > >
> > > > > Thanks in advance,
> > > > > Vrushali.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ------------------------------
> > > > >
> > > > > Message: 2
> > > > > Date: Wed, 16 Sep 2009 06:29:23 -0400
> > > > > From: David McKnight <dmcknigh@xxxxxxxxxx>
> > > > > Subject: Re: [dsdp-tm-dev] Connection timed
> > out
> > > > > error...RSEG1058
> > > > > To: Target Management developer discussions
> >
> > > > <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > Cc: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>,
> > > > > dsdp-tm-dev-bounces@xxxxxxxxxxx
> > > > > Message-ID:
> > > > >
> > > >
> <OF8AD2D2CB.5B377555-ON85257633.00398581-85257633.00399F04@xxxxxxxxxx>
> > > > > Content-Type: text/plain;
> > charset="us-ascii"
> > > > >
> > > > > Skipped content of type
> > > multipart/alternative--------------
> > > > > next part --------------
> > > > > A non-text attachment was scrubbed...
> > > > > Name: graycol.gif
> > > > > Type: image/gif
> > > > > Size: 105 bytes
> > > > > Desc: not available
> > > > > Url :
> > > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > s/20090916/602c221b/graycol.gif
> > > > > -------------- next part --------------
> > > > > A non-text attachment was scrubbed...
> > > > > Name: pic26832.gif
> > > > > Type: image/gif
> > > > > Size: 1255 bytes
> > > > > Desc: not available
> > > > > Url :
> > > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > s/20090916/602c221b/pic26832.gif
> > > > > -------------- next part --------------
> > > > > A non-text attachment was scrubbed...
> > > > > Name: ecblank.gif
> > > > > Type: image/gif
> > > > > Size: 45 bytes
> > > > > Desc: not available
> > > > > Url :
> > > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > s/20090916/602c221b/ecblank.gif
> > > > >
> > > > > ------------------------------
> > > > >
> > > > >
> > _______________________________________________
> > > > > dsdp-tm-dev mailing list
> > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > >
> > > > >
> > > > > End of dsdp-tm-dev Digest, Vol 50, Issue 1
> > > > > ******************************************
> > > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > dsdp-tm-dev mailing list
> > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > >
> > > -------------- next part --------------
> > > A non-text attachment was scrubbed...
> > > Name: sshTimeout.gif
> > > Type: image/gif
> > > Size: 13796 bytes
> > > Desc: sshTimeout.gif
> > > Url :
> https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
s/20090917/6db77751/sshTimeout.gif
> > >
> > > ------------------------------
> > >
> > > _______________________________________________
> > > dsdp-tm-dev mailing list
> > > dsdp-tm-dev@xxxxxxxxxxx
> > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > >
> > >
> > > End of dsdp-tm-dev Digest, Vol 50, Issue 2
> > > ******************************************
> > >
> >
> >
> >
> >
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Thu, 17 Sep 2009 16:52:12 +0200
> > From: "Oberhuber, Martin" <Martin.Oberhuber@xxxxxxxxxxxxx>
> > Subject: RE: [dsdp-tm-dev] Re: dsdp-tm-dev Digest, Vol 50,
> > Issue 2
> > To: "Target Management developer discussions"
> > <dsdp-tm-dev@xxxxxxxxxxx>
> > Message-ID:
> >
> <460801A4097E3D4CA04CC64EE64858480ADD8D81@xxxxxxxxxxxxxxxxxxxxxxxxxx>
> > Content-Type: text/plain;
> > charset="iso-8859-1"
> >
> > Oh.
> >
> > So you are not talking about timeout. You are talking
> > about
> > keepalive. Your server seems to disconnect your connection
> > after 5 minutes of inactivity. So you want RSE to send a
> > keepalive ever "less than 5 minutes".
> >
> > Incidentally, the default for timeout is 300 sec == 5 min.
> > Perhaps you want to reduce it.
> >
> > Cheers,
> > --
> > Martin Oberhuber, Senior Member of Technical Staff, Wind
> > River
> > Target Management Project Lead, DSDP PMC Member
> > http://www.eclipse.org/dsdp/tm
> >
> >
> >
> > > -----Original Message-----
> > > From: dsdp-tm-dev-bounces@xxxxxxxxxxx
> >
> > > [mailto:dsdp-tm-dev-bounces@xxxxxxxxxxx]
> > On Behalf Of vrushali babar
> > > Sent: Thursday, September 17, 2009 2:41 PM
> > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > Subject: [dsdp-tm-dev] Re: dsdp-tm-dev Digest, Vol 50,
> > Issue 2
> > >
> > > Hi Martin,
> > >
> > > Thanks for your reply.
> > > I can SSH to remote server by using RSE and even by
> > command line.
> > > In case of command line, even if I leave my machine
> > idle for
> > > 3-4 hours, my connection remains as it is.
> > > But in case of RSE, even if I leave my machine idle
> > for 5
> > > mins, whatever connections I've made, I need to
> > reconnect to
> > > all of them.
> > >
> > > To make connection I'm using following code
> > >
> > >
> > >
> > >
> > > private void connect(final ISubSystem subsys, final
> > > IProgressMonitor monitor) {
> > > //
> > monitor.beginTask("Connecting", 10);
> > > if (!subsys.isConnected()) {
> > > final Exception[] exception = new
> > Exception[1];
> > > exception[0] =
> > null;
> > >
> > Display.getDefault().syncExec(new Runnable() {
> > > public void
> > run() {
> > > try {
> > > ((SubSystem)
> > subsys).promptForPassword();
> > > } catch
> > (Exception e) {
> > >
> > exception[0] = e;
> > > }
> > > }
> > > });
> > > try {
> >
> > >
> > subsys.getConnectorService().connect(monitor);
> > > } catch (Exception e) {
> > > e.printStackTrace();
> > > }
> > > if (subsys.isConnected()) {
> > > // Notify connect status change
> > > Display.getDefault().asyncExec(new
> > Runnable() {
> > > public void run() {
> > > IPropertySet ps[] =
> > > subsys.getConnectorService().getPropertySets();
> > > for(int i=0
> > ;i<ps.length;i++)
> >
> > > System.out.println(i+1 + "\tName" +
> > ps[i].getName());
> > >
> >
> > //ps[0].
> > >
> >
> >
> > > RSECorePlugin.getTheSystemRegistry()
> > >
> >
> >
> > > .connectedStatusChange(subsys, true, false);
> > > }
> > > });
> > > }
> > > }
> > > //
> > monitor.done();
> > > }
> > >
> > >
> > > With the above code I can work well if I'm not leaving
> >
> > > Eclipse instance idle even for 2 mins. But otherwise I
> > need
> > > to reconnect.
> > > Please suggest if I'm going somewhere wrong or if I
> > need to
> > > do anything different.
> > >
> > > Stuck badly.
> > >
> > > Thanks a lot in advance,
> > > Vrushali.
> > >
> > >
> > >
> > > --- On Thu, 9/17/09, dsdp-tm-dev-request@xxxxxxxxxxx
> >
> > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > wrote:
> > >
> > > > From: dsdp-tm-dev-request@xxxxxxxxxxx
> >
> > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > Subject: dsdp-tm-dev Digest, Vol 50, Issue 2
> > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > Date: Thursday, September 17, 2009, 3:50 PM
> > > > Send dsdp-tm-dev mailing list
> > > > submissions to
> > > > dsdp-tm-dev@xxxxxxxxxxx
> > > >
> > > > To subscribe or unsubscribe via the World Wide
> > Web, visit
> > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > or, via email, send a message with subject or
> > body 'help'
> > > > to
> > > > dsdp-tm-dev-request@xxxxxxxxxxx
> > > >
> > > > You can reach the person managing the list at
> > > > dsdp-tm-dev-owner@xxxxxxxxxxx
> > > >
> > > > When replying, please edit your Subject line so
> > it is more
> > > > specific
> > > > than "Re: Contents of dsdp-tm-dev digest..."
> > > >
> > > >
> > > > Today's Topics:
> > > >
> > > > 1. Re: dsdp-tm-dev Digest, Vol 50, Issue
> > > > 1 (vrushali babar)
> > > > 2. Re: Connection timed out
> > > > error...RSEG1058 (vrushali babar)
> > > > 3. RE: Re: Connection timed out
> > > > error...RSEG1058 (Oberhuber, Martin)
> > > >
> > > >
> > > >
> > >
> >
> ----------------------------------------------------------------------
> > > >
> > > > Message: 1
> > > > Date: Wed, 16 Sep 2009 21:29:22 -0700 (PDT)
> > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > Subject: [dsdp-tm-dev] Re: dsdp-tm-dev Digest,
> > Vol 50,
> > > > Issue 1
> > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > Message-ID: <327503.2668.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > Content-Type: text/plain; charset=iso-8859-1
> > > >
> > > >
> > > > Hi David,
> > > >
> > > > I'm using SSH option to make connection. is there
> > any
> > > > method by which i can extend the connection
> > timeout range?
> > > >
> > > > Thanks,
> > > > Vrushali.
> > > >
> > > > --- On Wed, 9/16/09, dsdp-tm-dev-request@xxxxxxxxxxx
> > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > wrote:
> > > >
> > > > > From: dsdp-tm-dev-request@xxxxxxxxxxx
> > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > Subject: dsdp-tm-dev Digest, Vol 50, Issue
> > 1
> > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > Date: Wednesday, September 16, 2009, 9:30
> > PM
> > > > > Send dsdp-tm-dev mailing list
> > > > > submissions to
> > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > >
> > > > > To subscribe or unsubscribe via the World
> > Wide Web,
> > > > visit
> > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > or, via email, send a message with subject
> > or body
> > > > 'help'
> > > > > to
> > > > > dsdp-tm-dev-request@xxxxxxxxxxx
> > > > >
> > > > > You can reach the person managing the list
> > at
> > > > > dsdp-tm-dev-owner@xxxxxxxxxxx
> > > > >
> > > > > When replying, please edit your Subject line
> > so it is
> > > > more
> > > > > specific
> > > > > than "Re: Contents of dsdp-tm-dev
> > digest..."
> > > > >
> > > > >
> > > > > Today's Topics:
> > > > >
> > > > > 1. Connection timed out
> > error...RSEG1058
> > > > > (vrushali babar)
> > > > > 2. Re: Connection timed out
> > > > > error...RSEG1058 (David McKnight)
> > > > >
> > > > >
> > > > >
> > > >
> > >
> >
> ----------------------------------------------------------------------
> > > > >
> > > > > Message: 1
> > > > > Date: Tue, 15 Sep 2009 22:21:40 -0700 (PDT)
> > > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > > Subject: [dsdp-tm-dev] Connection timed out
> > > > > error...RSEG1058
> > > > > To: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > Message-ID: <749327.98085.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > > Content-Type: text/plain; charset=us-ascii
> > > > >
> > > > > Hi,
> > > > >
> > > > > I'm using RSE-SDK-3.1 and Eclipse 3.5. I
> > could make
> > > > > connection to remote server programmatically
> > but
> > > > suffering
> > > > > from connection timed out error RSEG1058,
> > saying
> > > > 'Connect to
> > > > > Remote_server_name was cancelled'.
> > > > >
> > > > > I tried setting Connection timeout using
> > Preference
> > > > page
> > > > > (Windows -> Preferences -> Remote
> > Systems ->
> > > > Data
> > > > > Store) by setting the value to 64800000 but
> > still
> > > > doesn't
> > > > > seemed to be solving my problem.
> > > > > Even after making the change in connection
> > timeout
> > > > range,
> > > > > i'm getting disconnected with the very short
> > period
> > > > of
> > > > > time.
> > > > >
> > > > > So I am in need of some way to set
> > connection timeout
> > > > when
> > > > > I'm connecting to remote server. Please
> > provide
> > > > pointers and
> > > > > even anyone could tell me what is the
> > default
> > > > timeout?
> > > > >
> > > > > Thanks in advance,
> > > > > Vrushali.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ------------------------------
> > > > >
> > > > > Message: 2
> > > > > Date: Wed, 16 Sep 2009 06:29:23 -0400
> > > > > From: David McKnight <dmcknigh@xxxxxxxxxx>
> > > > > Subject: Re: [dsdp-tm-dev] Connection timed
> > out
> > > > > error...RSEG1058
> > > > > To: Target Management developer discussions
> >
> > > <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > Cc: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>,
> > > > > dsdp-tm-dev-bounces@xxxxxxxxxxx
> > > > > Message-ID:
> > > > >
> > >
> <OF8AD2D2CB.5B377555-ON85257633.00398581-85257633.00399F04@xxxxxxxxxx>
> > > > > Content-Type: text/plain;
> > charset="us-ascii"
> > > > >
> > > > > Skipped content of type
> > > > multipart/alternative--------------
> > > > > next part --------------
> > > > > A non-text attachment was scrubbed...
> > > > > Name: graycol.gif
> > > > > Type: image/gif
> > > > > Size: 105 bytes
> > > > > Desc: not available
> > > > > Url :
> > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > s/20090916/602c221b/graycol.gif
> > > > > -------------- next part --------------
> > > > > A non-text attachment was scrubbed...
> > > > > Name: pic26832.gif
> > > > > Type: image/gif
> > > > > Size: 1255 bytes
> > > > > Desc: not available
> > > > > Url :
> > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > s/20090916/602c221b/pic26832.gif
> > > > > -------------- next part --------------
> > > > > A non-text attachment was scrubbed...
> > > > > Name: ecblank.gif
> > > > > Type: image/gif
> > > > > Size: 45 bytes
> > > > > Desc: not available
> > > > > Url :
> > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > s/20090916/602c221b/ecblank.gif
> > > > >
> > > > > ------------------------------
> > > > >
> > > > >
> > _______________________________________________
> > > > > dsdp-tm-dev mailing list
> > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > >
> > > > >
> > > > > End of dsdp-tm-dev Digest, Vol 50, Issue 1
> > > > > ******************************************
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > Message: 2
> > > > Date: Thu, 17 Sep 2009 00:09:05 -0700 (PDT)
> > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > Subject: [dsdp-tm-dev] Re: Connection timed out
> > > > error...RSEG1058
> > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > Message-ID: <113449.25932.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > Content-Type: text/plain; charset=iso-8859-1
> > > >
> > > >
> > > > Hi David,
> > > >
> > > > I'm trying to SSH connection. Looked for any
> > manual setting
> > > > available to set connection time out range but
> > didn't find
> > > > anything (Whatever I got was for Dstore).
> > > > While searching, i came across the following bug
> > id
> > > >
> > > > https://bugs.eclipse.org/bugs/show_bug.cgi?id=219936
> > > >
> > > > so looks like there is some solution available.
> > > > Till now i have finished following
> > > > - getting instance if IHost
> > > > - getting related ISubsystem
> > > > - Getting credentials if not yet provided and
> > connecting to
> > > > remote server
> > > >
> > > > but stuck at connection time out error.
> > > > Can you suggest if there is any method to set
> > connection
> > > > time out?
> > > > Help would be really grateful.
> > > >
> > > > Thanks a ton,
> > > > Vrushali.
> > > >
> > > >
> > > > --- On Wed, 9/16/09, dsdp-tm-dev-request@xxxxxxxxxxx
> > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > wrote:
> > > >
> > > > > From: dsdp-tm-dev-request@xxxxxxxxxxx
> > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > Subject: dsdp-tm-dev Digest, Vol 50, Issue
> > 1
> > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > Date: Wednesday, September 16, 2009, 9:30
> > PM
> > > > > Send dsdp-tm-dev mailing list
> > > > > submissions to
> > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > >
> > > > > To subscribe or unsubscribe via the World
> > Wide Web,
> > > > visit
> > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > or, via email, send a message with subject
> > or body
> > > > 'help'
> > > > > to
> > > > > dsdp-tm-dev-request@xxxxxxxxxxx
> > > > >
> > > > > You can reach the person managing the list
> > at
> > > > > dsdp-tm-dev-owner@xxxxxxxxxxx
> > > > >
> > > > > When replying, please edit your Subject line
> > so it is
> > > > more
> > > > > specific
> > > > > than "Re: Contents of dsdp-tm-dev
> > digest..."
> > > > >
> > > > >
> > > > > Today's Topics:
> > > > >
> > > > > 1. Connection timed out
> > error...RSEG1058
> > > > > (vrushali babar)
> > > > > 2. Re: Connection timed out
> > > > > error...RSEG1058 (David McKnight)
> > > > >
> > > > >
> > > > >
> > > >
> > >
> >
> ----------------------------------------------------------------------
> > > > >
> > > > > Message: 1
> > > > > Date: Tue, 15 Sep 2009 22:21:40 -0700 (PDT)
> > > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > > Subject: [dsdp-tm-dev] Connection timed out
> > > > > error...RSEG1058
> > > > > To: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > Message-ID: <749327.98085.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > > Content-Type: text/plain; charset=us-ascii
> > > > >
> > > > > Hi,
> > > > >
> > > > > I'm using RSE-SDK-3.1 and Eclipse 3.5. I
> > could make
> > > > > connection to remote server programmatically
> > but
> > > > suffering
> > > > > from connection timed out error RSEG1058,
> > saying
> > > > 'Connect to
> > > > > Remote_server_name was cancelled'.
> > > > >
> > > > > I tried setting Connection timeout using
> > Preference
> > > > page
> > > > > (Windows -> Preferences -> Remote
> > Systems ->
> > > > Data
> > > > > Store) by setting the value to 64800000 but
> > still
> > > > doesn't
> > > > > seemed to be solving my problem.
> > > > > Even after making the change in connection
> > timeout
> > > > range,
> > > > > i'm getting disconnected with the very short
> > period
> > > > of
> > > > > time.
> > > > >
> > > > > So I am in need of some way to set
> > connection timeout
> > > > when
> > > > > I'm connecting to remote server. Please
> > provide
> > > > pointers and
> > > > > even anyone could tell me what is the
> > default
> > > > timeout?
> > > > >
> > > > > Thanks in advance,
> > > > > Vrushali.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ------------------------------
> > > > >
> > > > > Message: 2
> > > > > Date: Wed, 16 Sep 2009 06:29:23 -0400
> > > > > From: David McKnight <dmcknigh@xxxxxxxxxx>
> > > > > Subject: Re: [dsdp-tm-dev] Connection timed
> > out
> > > > > error...RSEG1058
> > > > > To: Target Management developer discussions
> >
> > > <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > Cc: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>,
> > > > > dsdp-tm-dev-bounces@xxxxxxxxxxx
> > > > > Message-ID:
> > > > >
> > >
> <OF8AD2D2CB.5B377555-ON85257633.00398581-85257633.00399F04@xxxxxxxxxx>
> > > > > Content-Type: text/plain;
> > charset="us-ascii"
> > > > >
> > > > > Skipped content of type
> > > > multipart/alternative--------------
> > > > > next part --------------
> > > > > A non-text attachment was scrubbed...
> > > > > Name: graycol.gif
> > > > > Type: image/gif
> > > > > Size: 105 bytes
> > > > > Desc: not available
> > > > > Url :
> > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > s/20090916/602c221b/graycol.gif
> > > > > -------------- next part --------------
> > > > > A non-text attachment was scrubbed...
> > > > > Name: pic26832.gif
> > > > > Type: image/gif
> > > > > Size: 1255 bytes
> > > > > Desc: not available
> > > > > Url :
> > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > s/20090916/602c221b/pic26832.gif
> > > > > -------------- next part --------------
> > > > > A non-text attachment was scrubbed...
> > > > > Name: ecblank.gif
> > > > > Type: image/gif
> > > > > Size: 45 bytes
> > > > > Desc: not available
> > > > > Url :
> > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > s/20090916/602c221b/ecblank.gif
> > > > >
> > > > > ------------------------------
> > > > >
> > > > >
> > _______________________________________________
> > > > > dsdp-tm-dev mailing list
> > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > >
> > > > >
> > > > > End of dsdp-tm-dev Digest, Vol 50, Issue 1
> > > > > ******************************************
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > Message: 3
> > > > Date: Thu, 17 Sep 2009 12:19:41 +0200
> > > > From: "Oberhuber, Martin" <Martin.Oberhuber@xxxxxxxxxxxxx>
> > > > Subject: RE: [dsdp-tm-dev] Re: Connection timed
> > out
> > > > error...RSEG1058
> > > > To: "Target Management developer discussions"
> > > > <dsdp-tm-dev@xxxxxxxxxxx>
> > > > Message-ID:
> > > >
> > >
> <460801A4097E3D4CA04CC64EE64858480ADD8C80@xxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > Content-Type: text/plain; charset="iso-8859-1"
> > > >
> > > > Vrushali,
> > > >
> > > > I doubt that you really have a timeout problem.
> > > >
> > > > Can you connect your host with some commandline
> > tool
> > > > outside
> > > > Eclipse? Is sftp-server available on your remote
> > host?
> > > >
> > > > I suggest that you try the TM-Terminal to connect
> > to your
> > > > host.
> > > > This just needs a shell and no sftp-server -- and
> > allows
> > > > setting
> > > > a timeout value directly in its UI.
> > > >
> > > > RSE also allows setting a timeout value in the
> > connection
> > > > wizard
> > > > or connection properties, see attached.
> > > >
> > > > Cheers,
> > > > --
> > > > Martin Oberhuber, Senior Member of Technical
> > Staff, Wind
> > > > River
> > > > Target Management Project Lead, DSDP PMC Member
> > > > http://www.eclipse.org/dsdp/tm
> > > >
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: dsdp-tm-dev-bounces@xxxxxxxxxxx
> > > >
> > > > > [mailto:dsdp-tm-dev-bounces@xxxxxxxxxxx]
> > > > On Behalf Of vrushali babar
> > > > > Sent: Thursday, September 17, 2009 9:09 AM
> > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > Subject: [dsdp-tm-dev] Re: Connection timed
> > out
> > > > error...RSEG1058
> > > > >
> > > > >
> > > > > Hi David,
> > > > >
> > > > > I'm trying to SSH connection. Looked for any
> > manual
> > > > setting
> > > > > available to set connection time out range
> > but didn't
> > > > find
> > > > > anything (Whatever I got was for Dstore).
> > > > > While searching, i came across the following
> > bug id
> > > > >
> > > > > https://bugs.eclipse.org/bugs/show_bug.cgi?id=219936
> > > > >
> > > > > so looks like there is some solution
> > available.
> > > > > Till now i have finished following
> > > > > - getting instance if IHost
> > > > > - getting related ISubsystem
> > > > > - Getting credentials if not yet provided
> > and
> > > > connecting to
> > > > > remote server
> > > > >
> > > > > but stuck at connection time out error.
> > > > > Can you suggest if there is any method to
> > set
> > > > connection time out?
> > > > > Help would be really grateful.
> > > > >
> > > > > Thanks a ton,
> > > > > Vrushali.
> > > > >
> > > > >
> > > > > --- On Wed, 9/16/09, dsdp-tm-dev-request@xxxxxxxxxxx
> > > >
> > > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > wrote:
> > > > >
> > > > > > From: dsdp-tm-dev-request@xxxxxxxxxxx
> > > >
> > > > > <dsdp-tm-dev-request@xxxxxxxxxxx>
> > > > > > Subject: dsdp-tm-dev Digest, Vol 50,
> > Issue 1
> > > > > > To: dsdp-tm-dev@xxxxxxxxxxx
> > > > > > Date: Wednesday, September 16, 2009,
> > 9:30 PM
> > > > > > Send dsdp-tm-dev mailing list
> > > > > > submissions to
> > > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > > >
> > > > > > To subscribe or unsubscribe via the
> > World Wide
> > > > Web, visit
> > > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > > or, via email, send a message with
> > subject or
> > > > body 'help'
> > > > > > to
> > > > > > dsdp-tm-dev-request@xxxxxxxxxxx
> > > > > >
> > > > > > You can reach the person managing the
> > list at
> > > > > > dsdp-tm-dev-owner@xxxxxxxxxxx
> > > > > >
> > > > > > When replying, please edit your Subject
> > line so
> > > > it is more
> > > > > > specific
> > > > > > than "Re: Contents of dsdp-tm-dev
> > digest..."
> > > > > >
> > > > > >
> > > > > > Today's Topics:
> > > > > >
> > > > > > 1. Connection timed out
> > error...RSEG1058
> > > > > > (vrushali babar)
> > > > > > 2. Re: Connection timed out
> > > > > > error...RSEG1058 (David McKnight)
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> ----------------------------------------------------------------------
> > > > > >
> > > > > > Message: 1
> > > > > > Date: Tue, 15 Sep 2009 22:21:40 -0700
> > (PDT)
> > > > > > From: vrushali babar <vrush_com@xxxxxxxxx>
> > > > > > Subject: [dsdp-tm-dev] Connection timed
> > out
> > > > > > error...RSEG1058
> > > > > > To: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > > Message-ID: <749327.98085.qm@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > > > > Content-Type: text/plain;
> > charset=us-ascii
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > I'm using RSE-SDK-3.1 and Eclipse 3.5.
> > I could
> > > > make
> > > > > > connection to remote server
> > programmatically but
> > > > suffering
> > > > > > from connection timed out error
> > RSEG1058, saying
> > > > 'Connect to
> > > > > > Remote_server_name was cancelled'.
> > > > > >
> > > > > > I tried setting Connection timeout
> > using
> > > > Preference page
> > > > > > (Windows -> Preferences -> Remote
> > Systems
> > > > -> Data
> > > > > > Store) by setting the value to 64800000
> > but still
> > > > doesn't
> > > > > > seemed to be solving my problem.
> > > > > > Even after making the change in
> > connection
> > > > timeout range,
> > > > > > i'm getting disconnected with the very
> > short
> > > > period of
> > > > > > time.
> > > > > >
> > > > > > So I am in need of some way to set
> > connection
> > > > timeout when
> > > > > > I'm connecting to remote server. Please
> > provide
> > > > pointers and
> > > > > > even anyone could tell me what is the
> > default
> > > > timeout?
> > > > > >
> > > > > > Thanks in advance,
> > > > > > Vrushali.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > ------------------------------
> > > > > >
> > > > > > Message: 2
> > > > > > Date: Wed, 16 Sep 2009 06:29:23 -0400
> > > > > > From: David McKnight <dmcknigh@xxxxxxxxxx>
> > > > > > Subject: Re: [dsdp-tm-dev] Connection
> > timed out
> > > > > > error...RSEG1058
> > > > > > To: Target Management developer
> > discussions
> > > > > <dsdp-tm-dev@xxxxxxxxxxx>
> > > > > > Cc: dsdp-tm <dsdp-tm-dev@xxxxxxxxxxx>,
> > > > > > dsdp-tm-dev-bounces@xxxxxxxxxxx
> > > > > > Message-ID:
> > > > > >
> > > > >
> > >
> <OF8AD2D2CB.5B377555-ON85257633.00398581-85257633.00399F04@xxxxxxxxxx>
> > > > > > Content-Type: text/plain;
> > charset="us-ascii"
> > > > > >
> > > > > > Skipped content of type
> > > > multipart/alternative--------------
> > > > > > next part --------------
> > > > > > A non-text attachment was scrubbed...
> > > > > > Name: graycol.gif
> > > > > > Type: image/gif
> > > > > > Size: 105 bytes
> > > > > > Desc: not available
> > > > > > Url :
> > > > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > > s/20090916/602c221b/graycol.gif
> > > > > > -------------- next part
> > --------------
> > > > > > A non-text attachment was scrubbed...
> > > > > > Name: pic26832.gif
> > > > > > Type: image/gif
> > > > > > Size: 1255 bytes
> > > > > > Desc: not available
> > > > > > Url :
> > > > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > > s/20090916/602c221b/pic26832.gif
> > > > > > -------------- next part
> > --------------
> > > > > > A non-text attachment was scrubbed...
> > > > > > Name: ecblank.gif
> > > > > > Type: image/gif
> > > > > > Size: 45 bytes
> > > > > > Desc: not available
> > > > > > Url :
> > > > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > > > s/20090916/602c221b/ecblank.gif
> > > > > >
> > > > > > ------------------------------
> > > > > >
> > > > > >
> > _______________________________________________
> > > > > > dsdp-tm-dev mailing list
> > > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > > >
> > > > > >
> > > > > > End of dsdp-tm-dev Digest, Vol 50,
> > Issue 1
> > > > > >
> > ******************************************
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > _______________________________________________
> > > > > dsdp-tm-dev mailing list
> > > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > > >
> > > > -------------- next part --------------
> > > > A non-text attachment was scrubbed...
> > > > Name: sshTimeout.gif
> > > > Type: image/gif
> > > > Size: 13796 bytes
> > > > Desc: sshTimeout.gif
> > > > Url :
> > > https://dev.eclipse.org/mailman/private/dsdp-tm-dev/attachment
> > > s/20090917/6db77751/sshTimeout.gif
> > > >
> > > > ------------------------------
> > > >
> > > > _______________________________________________
> > > > dsdp-tm-dev mailing list
> > > > dsdp-tm-dev@xxxxxxxxxxx
> > > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > > >
> > > >
> > > > End of dsdp-tm-dev Digest, Vol 50, Issue 2
> > > > ******************************************
> > > >
> > >
> > >
> > >
> > > _______________________________________________
> > > dsdp-tm-dev mailing list
> > > dsdp-tm-dev@xxxxxxxxxxx
> > > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> > >
> >
> >
> > ------------------------------
> >
> > _______________________________________________
> > dsdp-tm-dev mailing list
> > dsdp-tm-dev@xxxxxxxxxxx
> > https://dev.eclipse.org/mailman/listinfo/dsdp-tm-dev
> >
> >
> > End of dsdp-tm-dev Digest, Vol 50, Issue 3
> > ******************************************
> >
>
>
>
>
