I think that if we have a descriptive Ganymede Category
("Remote Access and Mobile Devlopment") as well as descriptive project names
("Tools for Mobile Linux") then the ProviderName fits in nicely using our
acronym: "Eclipse.org - DSDP" given
that our homepage is also on http://eclipse.org/dsdp and googling for
"DSDP" does bring us up on 2nd rank (right after the Deep Sea Drilling Project
:)
As
said, I'm committing "Eclipse.org - DSDP" now but I can change
later if desired.
Cheers,
--
Martin Oberhuber, Senior Member of Technical
Staff, Wind River
Target Management Project
Lead, DSDP PMC Member
Like the icon. Pull the trigger.
Mauren suggests that we could come up with a more
descriptive providerName. Thoughts?
-E
Hi again,
I
think we need to agree on a common naming for the DSDP icon in our branding
plugins to ensure that our contributions all map to the same icon. Attached is
the proposed icon with its proposed name:
"dsdp32.png".
I'm
picking this up now into my branding plugins, along with provider name
"Eclipse.org - DSDP".
Let's see what it'll look like in Galileo RC1, we can still change it
if we don't like it (personally, I think it's perfect).
Cheers,
--
Martin Oberhuber, Senior Member of Technical
Staff, Wind River
Target Management
Project Lead, DSDP PMC Member
I agree. I like it better to the left so the orbit
isn't obscured.
Ship it!!!!
-E
I like dsdp32x32-2 (with the larger phone) very much
indeed! What do others think? Shall we pick it for RC1 ?
Cheers,
--
Martin Oberhuber, Senior Member of Technical
Staff, Wind River
Target Management
Project Lead, DSDP PMC Member
Here’s
the phone on the left intersecting with the orbit in two different phones
sizes.
From:
dsdp-pmc-bounces@xxxxxxxxxxx [mailto:dsdp-pmc-bounces@xxxxxxxxxxx] On
Behalf Of Oberhuber, Martin Sent: Monday, May 11, 2009 1:12
PM To: DSDP PMC list Subject: RE: [dsdp-pmc] dsdp
& CDT logos
(Moving
the phone to the left would probably have the same / similar
effect).
Cheers,
--
Martin Oberhuber,
Senior Member of Technical Staff, Wind
River
Target
Management Project Lead, DSDP PMC Member
http://www.eclipse.org/dsdp/tm
From: Oberhuber,
Martin Sent: Montag, 11. Mai 2009 19:11 To: 'DSDP
PMC list' Subject: RE: [dsdp-pmc] dsdp & CDT logos
Excellent!
My
only thought is, can we make the phone/board icon little larger such
that the ring around eclipse intersects the phone where the board starts
showing up?
Cheers,
--
Martin Oberhuber,
Senior Member of Technical Staff, Wind
River
Target
Management Project Lead, DSDP PMC Member
http://www.eclipse.org/dsdp/tm
From:
dsdp-pmc-bounces@xxxxxxxxxxx [mailto:dsdp-pmc-bounces@xxxxxxxxxxx]
On Behalf Of Gaff, Doug Sent: Montag, 11. Mai 2009
17:58 To: DSDP PMC list Subject: RE: [dsdp-pmc]
dsdp & CDT logos
I’m
playing with the modeling PNG file, since I’m not sure we have an AI
file with the modeling about box icon.
I
messed up the transparency, but do folks generally like this. No DSDP,
just the phone icon in the corner.
From:
dsdp-pmc-bounces@xxxxxxxxxxx [mailto:dsdp-pmc-bounces@xxxxxxxxxxx]
On Behalf Of Oberhuber, Martin Sent: Monday, May 11,
2009 10:07 AM To: DSDP PMC list;
hoopergaff@xxxxxxxxx Subject: RE: [dsdp-pmc] dsdp & CDT
logos
Hi
Doug & Brenda,
attached
is what the About dialog currently looks like in Galileo
M7.
I
think it will be better to get rid of the halo / glow, and have the
Eclipse
ball
same size as all the others but with the mobile phone / board
icon
overlaid.
Perhaps it would work to take the Modeling icon as
base?
Icon
owners in attached about are (from left to
right)
- Eclipse
- TPTP
- Eclipse
BIRT Project
- Eclipse.org
- Eclpise
Modeling Project
- Eclipse.org
(Subversive)
- Eclipse.org
- Eclipse
Data Tools Platform
- Eclipse.org
(CDT)
- Eclipse.org
- Eclipse.org
(Webtools)
- Eclipse.org
(Buckminster)
- Eclipse.org
- DSDP
- Eclipse.org
- Eclipse.org
- ECF
--
Martin Oberhuber,
Senior Member of Technical Staff, Wind
River
Target
Management Project Lead, DSDP PMC Member
http://www.eclipse.org/dsdp/tm
From:
dsdp-pmc-bounces@xxxxxxxxxxx [mailto:dsdp-pmc-bounces@xxxxxxxxxxx]
On Behalf Of Gaff, Doug Sent: Freitag, 08. Mai 2009
16:19 To: DSDP PMC list;
hoopergaff@xxxxxxxxx Subject: RE: [dsdp-pmc] dsdp &
CDT logos
We
squared off the large version and resized to 32x32, but I think the
large orbit is making the globe too small. We’ll fix it this
weekend.
From:
dsdp-pmc-bounces@xxxxxxxxxxx [mailto:dsdp-pmc-bounces@xxxxxxxxxxx]
On Behalf Of Oberhuber, Martin Sent: Wednesday, May
06, 2009 4:04 PM To: DSDP PMC list;
hoopergaff@xxxxxxxxx Subject: RE: [dsdp-pmc] dsdp &
CDT logos
Yes,
I was talking about the glow. And yes, my concern
was
that
the icon might look too small if the entire glow were
part
of
the reduced size version.
Cheers,
--
Martin Oberhuber,
Senior Member of Technical Staff, Wind
River
Target
Management Project Lead, DSDP PMC Member
http://www.eclipse.org/dsdp/tm
From:
dsdp-pmc-bounces@xxxxxxxxxxx [mailto:dsdp-pmc-bounces@xxxxxxxxxxx]
On Behalf Of Gaff, Doug Sent: Mittwoch, 06. Mai
2009 18:39 To: DSDP PMC list;
hoopergaff@xxxxxxxxx Subject: RE: [dsdp-pmc] dsdp &
CDT logos
Martin,
when you say remove the halo, are you talking about the glow
around the planet? (Folks: your image viewer needs to show
transparent as black to see the halo. I’ve put the two side by
side so we can see the difference. Modeling is scaled up, which is
why it looks pixilated.)
I
don’t really have a problem with the glow, personally. The width
of the orbit may force the plane to look too small when it’s scale
down, though.
If
everyone agrees on #5, Brenda and I can work with that.

From:
dsdp-pmc-bounces@xxxxxxxxxxx [mailto:dsdp-pmc-bounces@xxxxxxxxxxx]
On Behalf Of Oberhuber, Martin Sent: Tuesday, May
05, 2009 4:00 PM To: DSDP PMC list;
hoopergaff@xxxxxxxxx Subject: RE: [dsdp-pmc] dsdp &
CDT logos
I
agree with eric:
Initially
I liked 1 better, but I like it how the orbit intersects with the
phone in 5.
It's
surprising how well the icons look even if scaled down to 16x16
pix.
It's
high time that we agree on ONE icon for the about dialog, which
needs to be 32 x 32 pix.
See
the "ECLIPSE32.PNG" icon attached, which I'm currently using for
reference, as well as
modeling32.png
-- I think we should rescale the dsdp icon like modeling, perhaps
getting rid
of
the halo.
Resulting
icon should be "dsdp32.png" -- I think it's important that we use
all the same
icon
name, in order to make sure that our contributions can be
collapsed on the about
dialog.
Deadline
for having all checked in and released is RC1, which is in 2 weeks
already:
https://bugs.eclipse.org/bugs/show_bug.cgi?id=252813
http://wiki.eclipse.org/Galileo#Milestones_and_Release_Candidates
Cheers,
--
Martin Oberhuber,
Senior Member of Technical Staff, Wind
River
Target
Management Project Lead, DSDP PMC Member
http://www.eclipse.org/dsdp/tm
From:
dsdp-pmc-bounces@xxxxxxxxxxx
[mailto:dsdp-pmc-bounces@xxxxxxxxxxx] On Behalf Of
CLONINGER ERIC-DCP874 Sent: Sonntag, 03. Mai 2009
20:14 To: DSDP PMC list Subject: RE:
[dsdp-pmc] dsdp & CDT logos
Thanks
Brenda.
My
preferences, in order
5
1
2
4
3
6
-E
From:
dsdp-pmc-bounces@xxxxxxxxxxx
[mailto:dsdp-pmc-bounces@xxxxxxxxxxx] On Behalf Of Brenda
Gaff Sent: Saturday, May 02, 2009 8:33
PM To: 'DSDP PMC list' Subject: RE:
[dsdp-pmc] dsdp & CDT logos
Hi
everybody,
Great
Big Thanks to Daniel for this logo…very nice. Attached are six
options that merge Daniels and some of the others we’ve been
working on. I may want to change the color of the device screen
to better complement the eclipse colors. Also I could use some
feedback on the actual placement of “dsdp” and the icon…along
with sizing of these elements and upper v. lower-case options.
Take a look…
Brenda
From:
dsdp-pmc-bounces@xxxxxxxxxxx
[mailto:dsdp-pmc-bounces@xxxxxxxxxxx] On Behalf Of Daniel
Barboza Franco Sent: Wednesday, April 29, 2009 5:12
PM To: DSDP PMC list Subject: RE: [dsdp-pmc]
dsdp & CDT logos
Yes,
from scratch J
I
am sending you the upright version in separate files and the xcf
(GIMP) that contains the original layers.
Daniel.
From:
dsdp-pmc-bounces@xxxxxxxxxxx
[mailto:dsdp-pmc-bounces@xxxxxxxxxxx] On Behalf Of Gaff,
Doug Sent: quarta-feira, 29 de abril de 2009
17:47 To: DSDP PMC list Subject: RE:
[dsdp-pmc] dsdp & CDT logos
Hi
Daniel,
That
phone icon is really cool! Did you make it yourself? Do you have
an upright version too?
Many
thanks for the contribution.
Doug
Gaff
From:
dsdp-pmc-bounces@xxxxxxxxxxx
[mailto:dsdp-pmc-bounces@xxxxxxxxxxx] On Behalf Of Daniel
Barboza Franco Sent: Wednesday, April 29, 2009 4:28
PM To: dsdp-pmc@xxxxxxxxxxx Subject: RE:
[dsdp-pmc] dsdp & CDT logos
Hi
dsdp guys!
I was
thinking in something like a device as a space ship or a
monolith (Kubrick/Clarke 2001) targeting the Eclipse
logo.
The
idea is attached. Maybe it can give you guys more
ideas.
Daniel.
|