[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
[
List Home]
|
Re: [cross-project-issues-dev] Migrating SimRel files this weekend to Git
|
The re-enable part is in the b3aggrcon
file. There is now an enabled="fasle" attribute for your contribution
(in master branch) that you have to remove, commit, and push.
Not sue what the status of the "kepler
flag" is for simultaneous release in the Portal. AFAIK, the EMO is
planning to roll-out their new Portal soon and I am assume that will all
be handled then.
The "re-enable" contribution
is independent of that. (They could be made related ... but ... not sure
anyone is thinking that far ahead).
Thanks!
From:
Ed Merks <ed.merks@xxxxxxxxx>
To:
David M Williams/Raleigh/IBM@IBMUS,
Cc:
dennis.huebner@xxxxxxxxx
Date:
08/07/2012 03:30 AM
Subject:
Re: [cross-project-issues-dev]
Migrating SimRel files this weekend to Git
David,
I'm not sure what I need to do to reenable EMF and XSD from the referenced
bugzilla. I went to the portal to manage modeling.emf.emf, but I
don't see Kepler in the choices:
Regards,
Ed
On 07/08/2012 1:56 AM, David M Williams wrote:
Ok, all done
The main changes were in
http://wiki.eclipse.org/Simrel/Contributing_to_Simrel_Aggregation_Build
Which itself was renamed from previous "Juno specific" version
(Seems things are constant and steady enough to justify one document for
both Juno and Kepler).
If I've missed anything (or, anything unclear) let me me know.
Most important, in the master branch (for Kepler), I have disabled every
contribution and will require projects to re-enable themselves as a sign
they are intending to participate in Kepler (See bug 365738).
The bad news is there is a large "order effect" here. For example,
EMF and GEF must re-enable themselves before WTP (or nearly anyone else)
could correctly aggregate.
The good news is that I put an early "warm-up I build" in for
Eclipse and Equinox (and, yes, enabled them) and from some quick checks,
it appears everyone still builds with the Platform's Kepler M1 (at least,
as of right now, with warm-up) so ... the point is ... many low level projects
such as EMF or GEF could likely re-enable themselves quickly before any
new contributions were made/ready, thereby enabling your consuming projects
to re-enable themselves too. Put another way, there is no reason to wait
until your designated +n day to re-enable yourself, and if you do, it'd
likely complicate getting M1 done.
This complete the 5 steps outlined in my original note. Transition complete
.... now on to business.
Both Kepler M1 and Juno RC1 complete the same week (final contributions
from 8/20 to 8/22). That will be a busy week, so anything that can be done
early, even if done as "warmup" willl likely help that week complete
on time.
Thanks,
From: David
M Williams/Raleigh/IBM@IBMUS
To: Cross
project issues <cross-project-issues-dev@xxxxxxxxxxx>,
Date: 08/06/2012
12:52 AM
Subject: Re:
[cross-project-issues-dev] Migrating SimRel files this weekend
to Git
Sent by: cross-project-issues-dev-bounces@xxxxxxxxxxx
Just to keep all informed. I have migrated sim rel file to Git
https://bugs.eclipse.org/bugs/show_bug.cgi?id=359240
And have the builds working at
https://hudson.eclipse.org/hudson/view/Repository%20Aggregation/
But have not yet update any related documentation or "how to"
information, which I will be working on this week and post again when "all
done".
https://bugs.eclipse.org/bugs/show_bug.cgi?id=386655
So, no need to worry about much till then, but ... reserve some time later
in the week for worrying :)
In the mean time, if you can't resist poking around :) remember that master
of org.eclipse.simrel.build will be for Kepler and the Juno_maintenance
branch will be for Juno SR1.
As before, the resulting p2 repositories for Kepler staging will be
http://download.eclipse.org/releases/staging
while Juno SR1 p2 staging will be at
http://download.eclipse.org/releases/maintenance
Whew,
From: David
M Williams/Raleigh/IBM@IBMUS
To: Cross
project issues <cross-project-issues-dev@xxxxxxxxxxx>,
Date: 08/03/2012
01:56 PM
Subject: [cross-project-issues-dev]
Migrating SimRel files this weekend to Git
Sent by: cross-project-issues-dev-bounces@xxxxxxxxxxx
Just an FYI that I will be moving the Sim Rel files over to Git this weekend.
It would not really hurt much if you continued to make changes today or
tomorrow ... but, you might have to do them again depending on exact timing.
The build did get back to runnable state with just one feature disabled
and in communication with the team (SOA BPEL) the person to "really
fix" the issue is still out on holiday.
So, we will be close to Juno SR0, but probably not exact.
The hardest part for me this weekend will be updating all the "how
to" wiki pages, etc., so (after Monday) if people see areas I've missed,
let me know.
I'll try to remember to turn off "notifications" as I'm sure
a couple of aggregation builds will fail as I put new system in place,
but if you see any such messages this weekend, you can safely ignore them.
And, thanks Henrik for the reminder to tag the initial version in Git with
JunoSR0 ... I would have forgotten. The final one in CVS was tagged with
JunoRC4b.
I'll be off line this afternoon but will check mail and this list before
actually starting the work this evening, so if anyone has any concerns
or questions, feel free to say.
I'll document details in bug 359240
https://bugs.eclipse.org/bugs/show_bug.cgi?id=359240
And give notice to this list when things are ready and set to go.
Thanks,
From: David
M Williams/Raleigh/IBM@IBMUS
To: cross-project-issues-dev@xxxxxxxxxxx,
Date: 07/31/2012
08:46 PM
Subject: [cross-project-issues-dev]
Kepler initial daze
Sent by: cross-project-issues-dev-bounces@xxxxxxxxxxx
I have turned back on the aggregation builds.
Not surprisingly it failed right away, since, I suspect, many projects
still need to update their URLs to their final Juno release repository.
There are a couple of activities going on over the next week to 10 days,
such that it would be to your advantage to get those up to date in the
next few days. That is, updating so the "Juno Release" builds
again.
Here's an outline of what is quickly coming up (I propose).
First, transition to Git. [1] I have been exploring and experimenting with
moving the aggregation files and build to Git and am feeling confident
enough to say we'll do it in about a week. So, at some point, let's say
Friday, 8/3, will be the official "cut off" time for CVS changes.
After that, I suspect there will be a little "down time" while
I actually do the move, and get things working again before it'd make sense
to make official changes to your Git files. So, anything not building by
Friday will just be disabled.
Second, change in aggregation build project name. [1] As we "rethink"
this stuff, as we move to Git, and a new release, it makes sense to change
the name of the projects to a persistent name, that won't change from release
to release, and instead we'll just make persistent branches of those projects.
The name currently proposed for new project will be "org.eclipse.simrel.builds"
which will initially be a "copy" of "org.eclipse.juno.builds"
(done after Friday 8/3).
Third, right after we migrate to Git, and get the build running again with
those Git repos, we will branch master of "org.eclipse.simrel.builds"
to Juno_maintenance. From that point on, master will be for Kepler and
Juno_maintenance for Juno SR1. I expect this all to happen before
Kepler M1 +0 which is 8/10 [2] (And Juno SR1 aggregation starts shortly
after that. [3] )
Fourth, we need the maintenance branch to be able to build at any time
... so, everyone needs to get and keep that up to date, if anything breaks
from what ever your final release was (which, should be unlikely). But
...
Fifth, due to some discussions in some bug somewhere [4], it was decided
that as we start a new release, ALL projects will start off disabled in
the aggregation build. The project team will need to re-enable when they
are ready and committed to Kepler, which should be for M1 for those participating
in Juno. That would be by 8/22 at the latest. Anyone in Juno, but
not in Kepler M1 will be assumed to not be participating in Kepler or having
some troubles. Projects new to Kepler (still) have until M4 (at the latest)
to join the train (but, can join earlier, if they'd like!).
So, a lot is proposed to be happening over the next week. I will keep you
informed along the way, but ... if anyone wants to update your CVS files
one last time, now is the time to do it.
Comments, suggestions, questions, and your cooperation :) will be most
welcome.
Thanks,
[1] https://bugs.eclipse.org/bugs/show_bug.cgi?id=359240
[2] http://wiki.eclipse.org/Kepler/Simultaneous_Release_Plan#Schedule
[3] http://wiki.eclipse.org/Juno/Simultaneous_Release_Plan#SR1
[4] https://bugs.eclipse.org/bugs/show_bug.cgi?id=365738
_______________________________________________
cross-project-issues-dev mailing list
cross-project-issues-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/cross-project-issues-dev
_______________________________________________
cross-project-issues-dev mailing list
cross-project-issues-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/cross-project-issues-dev
_______________________________________________
cross-project-issues-dev mailing list
cross-project-issues-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/cross-project-issues-dev
_______________________________________________
cross-project-issues-dev mailing list
cross-project-issues-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/cross-project-issues-dev
Attachment:
STG50990
Description: Binary data
