Skip to main content
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [List Home]
Re: [aperi-dev] Couldnt make SAN simulator to work
Hi,
 
Yes i was able to do it however not sure whats the way for CIMOM, i tried with Configuration based option while running setup and chose to create new Cimom Instance.
 
I did chosen for DS8000 and other option for MOF files n all and completed the setup.
 
However if i start the CIMOM it stops on the screen but stucked at the screen and doesnt show like port no n all.
 
Dont know Snapshot based will help or config based will help.
 
Well lemme come to the bas epoint.
 
I am new to storage and wanna learn about DS and SAN swicthes etc. so want a simulator where i can practise on these technologies so was looking at this software,
 
What do i do :-).
 
Help Ramani.
 


 
On Thu, Feb 28, 2008 at 2:03 PM, Ramani R Routray <routrayr@xxxxxxxxxx> wrote:
Hi Vikas,

If, you are able to start the SAN Simulator successfully by starting
simulator_start_cimom.bat - it should be up and running.

You are right, you can use Aperi SRM to discover and browse the details of
the simulated device. You can also access the details of the simulated
device from SAN Simulator by one of the following ways:
     i) writing a small java program using SBLIM CIM Client
( http://sblim.wiki.sourceforge.net/CimClient). SBLIM CIMClient jar file is
also packaged inside SAN Simulator. You should find it inside
SIMULATOR_HOME\lib
     ii) Using SBLIM ECUTE explorer
( http://sblim.wiki.sourceforge.net/Ecute ).

regards,
Ramani R. Routray
IBM Almaden Research Center




            "Vikas Bajaj"
            <vikabajaj@gmail.
            com>                                                       To
            Sent by:                  "Aperi Development"
            aperi-dev-bounces         <aperi-dev@xxxxxxxxxxx>
            @eclipse.org                                               cc

                                                                  Subject
            02/28/2008 12:08          Re: [aperi-dev] Couldnt make SAN
            AM                        simulator to work


            Please respond to
            Aperi Development
            <aperi-dev@eclips
                 e.org>






Oh Hi Ramani,

Seems i made you confused a bit.

I installed SAN simulator an dhope its installed fine. Now to simualte or
work on the devices i need to access it.

For that i hope SNM is required. I may be wrong but dont know how to get
access to SAN simulator to work on.

Please correct me if i am wrong.

On Thu, Feb 28, 2008 at 1:27 PM, Ramani R Routray <routrayr@xxxxxxxxxx>
wrote:
 Hi Vikas,

 I think, you are having problem installing Aperi Storage Resource Manager
 ( Your screenshot of error message is for Aperi SRM).

 The video I sent you, shows all the steps to install and use Aperi
 Storage
 Network Simulator / SAN Simulator. This tool provides a simulated CIM
 agent. What step are you getting problem while installing SAN Simulator ?

 regards,
 Ramani R. Routray
 IBM Almaden Research Center




             "Vikas Bajaj"
             <vikabajaj@gmail.
             com>                                                       To
             Sent by:                  "Aperi Development"
             aperi-dev-bounces         <aperi-dev@xxxxxxxxxxx>
             @eclipse.org                                               cc

                                                                   Subject
             02/27/2008 11:35          Re: [aperi-dev] Couldnt make SAN
             PM                        simulator to work


             Please respond to
             Aperi Development
             <aperi-dev@eclips
                  e.org>






 Hi,
 I uninstalled JAV and reinstalled Sun Java 1.4.2 and now the error got
 changed while installing SAN manager..

 However i still feel, JDBC error will come again once i move on from
 this.

 Someone who made SAN simulator work, can help me with the exact things
 which he has on his PC>

 Vikas

 On Thu, Feb 28, 2008 at 11:37 AM, Vikas Bajaj <vikabajaj@xxxxxxxxx>
 wrote:
  Hi Nissam,

  Yes unfortunately, i did that.  But manifest folder was not there. The
  manifest file was in  C:\SAN1\Aperi\plugins\org.eclipse.aperi.db_1.0.0

  and i renamed it.,

  I am running DB2 and its has the DB to connect, dont know how its not
  working.

  Regards
  Vikas Bajaj

  On Thu, Feb 28, 2008 at 11:36 AM, Nissamudeen Rawther <
  rnissamudeen@xxxxxxxxxx> wrote:
   Hi
      ok ,for the storage manager you need to copy the driver files to the
   plugin directories.
      1. Locate the DB2 JDBC driver that was installed during the DB2
         installation. On WinHi Nissamdows, check C:\Program Files\IBM
         \SQLLIB\Java. The filenames are db2jcc.jar and
         db2jcc_license_cu.jar.
      1. Copy the driver files to the following Aperi directories:
      2. [aperi_install_dir]\plugins\org.eclipse.aperi.db_1.0.0
         [aperi_install_dir]\gui\plugins
      1. Go to [aperi_install_dir]\plugins\org.eclipse.aperi.db_1.0.0
         \MANIFEST.
      2. Delete MANIFEST.MF.
      3. Rename DB2-MANIFEST.MF to MANIFEST.MF.
   You already did these steps also?.
   You were able to start the storage manager with Derby as the database?

   best rgds
   nissam

   >>> "Vikas Bajaj" <vikabajaj@xxxxxxxxx> 2/28/2008 11:23 AM >>>
   Hi Missan,

   Thanks for replying, however i did copied the files :-( and they are
   still there.

   Regards
   Vikas

   On Thu, Feb 28, 2008 at 11:24 AM, Nissamudeen Rawther <
   rnissamudeen@xxxxxxxxxx> wrote:
     Hi Vikas
        It seems you missed copying the DB2 driver files to the simulator
     lib directory.
        1. Copy the DB2 JDBC driver into the [SIMULATOR_HOME] directory.
 To
           do this, locate the DB2 JDBC driver that was installed during
           the DB2 installation in the Plan for the database repository
           section. On Windows, check C:\Program Files\IBM\SQLLIB\Java.
        2. For DB2 v8.2.: Copy db2java.zip, db2jcc.jar,
           db2jcc_license_cisuz.jar, and db2jcc_license_cu.jar into
           [SIMULATOR_HOME]\lib.
           For DB2 v9.5: Copy db2java.zip and db2jcc.jar into
           [SIMULATOR_HOME]\lib.
     best rgds
     nissam

     >>> "Vikas Bajaj" <?vikabajaj@gmail.com> 2/28/2008 10:32 AM >>>
     Hi,

     Infact this is the screen shot of error message.


     Thanks for you help ramani.

     Regards
     Vikas Bajaj
     On Thu, Feb 28, 2008 at 10:17 AM, Vikas Bajaj <.vikabajaj@xxxxxxxxxx>
     wrote:
      Hi Ramani,

      Thanks for your quick reply, however i followed the instructions but
      coulndt get it works.

      When i install Storage Network manager, it finishes the setup but
      under error it shows that it couldnt find JDBC driver.

      If you are online, let me know, you can take control of my system
 and
      help me out.

      Your help will be appriciated,,

      Regards
      Vikas Bajaj

      On Thu, Feb 28, 2008 at 10:10 AM, Ramani R Routray <
      routrayr@xxxxxxxxxx> wrote:
        Hi Vikas,

        You can follow the instructions at URL
        (

 http://www.eclipse.org/aperi/documentation/r4/install_simulator.php..
         ) to
        download and install SAN Simulator. User guide is also available
 at
        URL
        ( http://www.eclipse.org/aperi/documentation/r4/SAN Simulator User
        Guide.pdf. ).



        Let me know exactly which step, your Simulator installation fails.
        I can
        quickly guide you to make it work. It's a very simple set of
        install steps
        and takes about 10 minutes to install and use. Also pls. find
        attached, a
        movie that captures an installation and usage scenario.
         (See attached file: Demo-Simulator-30-Oct-2007.wmv)

        regards,
        Ramani R. Routray
        IBM Almaden Research Center




                    "Vikas Bajaj"
                    <vikabajaj@gmail.
                    com>
        To
                    Sent by:                  aperi-dev@xxxxxxxxxxx
                    aperi-dev-bounces
        cc
                    @eclipse.org

        Subject
                                              [aperi-dev] Couldnt make SAN
                    02/27/2008 08:02          simulator to work
                    PM


                    Please respond to
                    Aperi Development
                    <aperi-dev@eclips
                         e.org>.






        Hi,

        Just not able to make work the SAN simulator.

        Anyone who can tell that how SAN simulator and SAN network manager
        works.

        I installed SAN simulator but SAN network manager gives error as
        server
        doesnt start.

        Help me

        Vikas _______________________________________________
        aperi-dev mailing list
        aperi-dev@xxxxxxxxxxx
        https://dev.eclipse.org/mailman/listinfo/aperi-dev

        _______________________________________________
        aperi-dev mailing list
        aperi-dev@xxxxxxxxxxx
        https://dev.eclipse.org/mailman/listinfo/aperi-dev




     _______________________________________________
     aperi-dev mailing list
     aperi-dev@xxxxxxxxxxx
     https://dev.eclipse.org/mailman/listinfo/aperi-dev



   _______________________________________________
   aperi-dev mailing list
   aperi-dev@xxxxxxxxxxx
   https://dev.eclipse.org/mailman/listinfo/aperi-dev


 (See attached file: error1.JPG)
 _______________________________________________
 aperi-dev mailing list
 aperi-dev@xxxxxxxxxxx
 https://dev.eclipse.org/mailman/listinfo/aperi-dev

 _______________________________________________
 aperi-dev mailing list
 aperi-dev@xxxxxxxxxxx
 https://dev.eclipse.org/mailman/listinfo/aperi-dev

_______________________________________________
aperi-dev mailing list
aperi-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/aperi-dev


_______________________________________________
aperi-dev mailing list
aperi-dev@xxxxxxxxxxx
https://dev.eclipse.org/mailman/listinfo/aperi-dev

Back to the top