Home » Archived » Test and Performance Tools Platform (TPTP) » how to run in standard mode
| | | | | | |
Re: how to run in standard mode [message #138568 is a reply to message #138556] |
Thu, 20 November 2008 11:29 |
Paul Slauenwhite Messages: 975 Registered: July 2009 |
Senior Member |
|
|
Yes, that is the right workspace. Does the context workspace get created
when you run the test? If not, does the context workbench appear? If not,
are there any errors in your .log file?
Paul
"Asha " <asha@readiminds.com> wrote in message
news:697466ee4db8588a6e14b6f88c7025e8$1@www.eclipse.org...
> Hi Paul,
> I defined behaviour for test cases.the workspace specified is "
> ${workspace_loc}/../auto-gui-workspace".is this right? Paul Slauenwhite
> wrote:
>
>> Hi Asha,
>> Do you have a behaviour defined for your test suite? Does the
>> workspace specified in the AGR test suite editor (Overview tab) get
>> created?
>
>> I would suggest that you have something wrong with your install. Cna
>> you try reinstalling using these installation instructions:
>
>>
> http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0
>
>> Paul
>> "Asha " <asha@readiminds.com> wrote in message
>> news:7c73259f22a371f60e3402990ce1533f$1@www.eclipse.org...
>>> Hi, no error is coming.there should be another workbench open when we
>>> run in standard mode, but in my case the current workbench closed and
>>> after that nthg happens. and when i open the workbench then i didn' get
>>> the testsuite.execution file.
>>>
>>> Paul Slauenwhite wrote:
>>>
>>>> Hi Asha,
>>>> Do you have a behaviour defined for your test suite? If so, does
>>>> the context workbench appear? If not, are there any errors in your
>>>> .log files in both your workspace and the workspace specified in the
>>>> AGR test suite editor (Overview tab)?
>>>
>>>> Paul
>>>> "Asha " <asha@readiminds.com> wrote in message
>>>> news:28899a5bf6b2f6b411895703b9d25683$1@www.eclipse.org...
>>>>> hi..I follow all the steps written in "An Introduction to Using TPTP's
>>>>> Automated GUI Recorder" document for running test cases in standard
>>>>> mode. but still i m not able to run it .after running nothing
>>>>> happens.can anyone tell me in detail (Step wise)for running test cases
>>>>> in standard mode..
>>>>>
>>>
>>>
>
>
|
|
|
Re: how to run in standard mode [message #138580 is a reply to message #138568] |
Thu, 20 November 2008 11:40 |
Asha Messages: 28 Registered: July 2009 |
Junior Member |
|
|
Hi Paul,
In error log i get error as "Invalid preference page path:
Icon Style" .but i m not able to get test log file, how can i see test log
file.
Paul Slauenwhite wrote:
> Yes, that is the right workspace. Does the context workspace get created
> when you run the test? If not, does the context workbench appear? If not,
> are there any errors in your .log file?
> Paul
> "Asha " <asha@readiminds.com> wrote in message
> news:697466ee4db8588a6e14b6f88c7025e8$1@www.eclipse.org...
>> Hi Paul,
>> I defined behaviour for test cases.the workspace specified is "
>> ${workspace_loc}/../auto-gui-workspace".is this right? Paul Slauenwhite
>> wrote:
>>
>>> Hi Asha,
>>> Do you have a behaviour defined for your test suite? Does the
>>> workspace specified in the AGR test suite editor (Overview tab) get
>>> created?
>>
>>> I would suggest that you have something wrong with your install. Cna
>>> you try reinstalling using these installation instructions:
>>
>>>
>>
http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0
>>
>>> Paul
>>> "Asha " <asha@readiminds.com> wrote in message
>>> news:7c73259f22a371f60e3402990ce1533f$1@www.eclipse.org...
>>>> Hi, no error is coming.there should be another workbench open when we
>>>> run in standard mode, but in my case the current workbench closed and
>>>> after that nthg happens. and when i open the workbench then i didn' get
>>>> the testsuite.execution file.
>>>>
>>>> Paul Slauenwhite wrote:
>>>>
>>>>> Hi Asha,
>>>>> Do you have a behaviour defined for your test suite? If so, does
>>>>> the context workbench appear? If not, are there any errors in your
>>>>> .log files in both your workspace and the workspace specified in the
>>>>> AGR test suite editor (Overview tab)?
>>>>
>>>>> Paul
>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>> news:28899a5bf6b2f6b411895703b9d25683$1@www.eclipse.org...
>>>>>> hi..I follow all the steps written in "An Introduction to Using TPTP's
>>>>>> Automated GUI Recorder" document for running test cases in standard
>>>>>> mode. but still i m not able to run it .after running nothing
>>>>>> happens.can anyone tell me in detail (Step wise)for running test cases
>>>>>> in standard mode..
>>>>>>
>>>>
>>>>
>>
>>
|
|
|
Re: how to run in standard mode [message #138628 is a reply to message #138580] |
Fri, 21 November 2008 06:37 |
Asha Messages: 28 Registered: July 2009 |
Junior Member |
|
|
The error "Invalid preference page path: Icon Style" is not related with
automated test cases.Other than that i not getting any error in error log
file..
Asha wrote:
> Hi Paul,
> In error log i get error as "Invalid preference page path:
> Icon Style" .but i m not able to get test log file, how can i see test log
> file.
> Paul Slauenwhite wrote:
>> Yes, that is the right workspace. Does the context workspace get created
>> when you run the test? If not, does the context workbench appear? If not,
>> are there any errors in your .log file?
>> Paul
>> "Asha " <asha@readiminds.com> wrote in message
>> news:697466ee4db8588a6e14b6f88c7025e8$1@www.eclipse.org...
>>> Hi Paul,
>>> I defined behaviour for test cases.the workspace specified is "
>>> ${workspace_loc}/../auto-gui-workspace".is this right? Paul Slauenwhite
>>> wrote:
>>>
>>>> Hi Asha,
>>>> Do you have a behaviour defined for your test suite? Does the
>>>> workspace specified in the AGR test suite editor (Overview tab) get
>>>> created?
>>>
>>>> I would suggest that you have something wrong with your install. Cna
>>>> you try reinstalling using these installation instructions:
>>>
>>>>
>>>
>
http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0
>>>
>>>> Paul
>>>> "Asha " <asha@readiminds.com> wrote in message
>>>> news:7c73259f22a371f60e3402990ce1533f$1@www.eclipse.org...
>>>>> Hi, no error is coming.there should be another workbench open when we
>>>>> run in standard mode, but in my case the current workbench closed and
>>>>> after that nthg happens. and when i open the workbench then i didn' get
>>>>> the testsuite.execution file.
>>>>>
>>>>> Paul Slauenwhite wrote:
>>>>>
>>>>>> Hi Asha,
>>>>>> Do you have a behaviour defined for your test suite? If so, does
>>>>>> the context workbench appear? If not, are there any errors in your
>>>>>> .log files in both your workspace and the workspace specified in the
>>>>>> AGR test suite editor (Overview tab)?
>>>>>
>>>>>> Paul
>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>> news:28899a5bf6b2f6b411895703b9d25683$1@www.eclipse.org...
>>>>>>> hi..I follow all the steps written in "An Introduction to Using TPTP's
>>>>>>> Automated GUI Recorder" document for running test cases in standard
>>>>>>> mode. but still i m not able to run it .after running nothing
>>>>>>> happens.can anyone tell me in detail (Step wise)for running test cases
>>>>>>> in standard mode..
>>>>>>>
>>>>>
>>>>>
>>>
>>>
|
|
|
Re: how to run in standard mode [message #138640 is a reply to message #138628] |
Fri, 21 November 2008 11:27 |
Paul Slauenwhite Messages: 975 Registered: July 2009 |
Senior Member |
|
|
Asha,
I would suggest that you try reinstallating the TPTP all-in-one
(http://www.eclipse.org/tptp/home/downloads/?ver=4.5.1) and the AGR (see
http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0).
Paul
"Asha " <asha@readiminds.com> wrote in message
news:20618c8f40ff239685c2cb50ba98a99e$1@www.eclipse.org...
> The error "Invalid preference page path: Icon Style" is not related with
> automated test cases.Other than that i not getting any error in error log
> file..
>
> Asha wrote:
>
>> Hi Paul,
>
>> In error log i get error as "Invalid preference page path:
>> Icon Style" .but i m not able to get test log file, how can i see test
>> log file.
>
>> Paul Slauenwhite wrote:
>
>>> Yes, that is the right workspace. Does the context workspace get
>>> created when you run the test? If not, does the context workbench
>>> appear? If not, are there any errors in your .log file?
>
>>> Paul
>>> "Asha " <asha@readiminds.com> wrote in message
>>> news:697466ee4db8588a6e14b6f88c7025e8$1@www.eclipse.org...
>>>> Hi Paul,
>>>> I defined behaviour for test cases.the workspace specified is "
>>>> ${workspace_loc}/../auto-gui-workspace".is this right? Paul Slauenwhite
>>>> wrote:
>>>>
>>>>> Hi Asha,
>>>>> Do you have a behaviour defined for your test suite? Does the
>>>>> workspace specified in the AGR test suite editor (Overview tab) get
>>>>> created?
>>>>
>>>>> I would suggest that you have something wrong with your install.
>>>>> Cna you try reinstalling using these installation instructions:
>>>>
>>>>>
>>>>
>>
> http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0
>>>>
>>>>> Paul
>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>> news:7c73259f22a371f60e3402990ce1533f$1@www.eclipse.org...
>>>>>> Hi, no error is coming.there should be another workbench open when we
>>>>>> run in standard mode, but in my case the current workbench closed and
>>>>>> after that nthg happens. and when i open the workbench then i didn'
>>>>>> get the testsuite.execution file.
>>>>>>
>>>>>> Paul Slauenwhite wrote:
>>>>>>
>>>>>>> Hi Asha,
>>>>>>> Do you have a behaviour defined for your test suite? If so,
>>>>>>> does the context workbench appear? If not, are there any errors in
>>>>>>> your .log files in both your workspace and the workspace specified
>>>>>>> in the AGR test suite editor (Overview tab)?
>>>>>>
>>>>>>> Paul
>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>> news:28899a5bf6b2f6b411895703b9d25683$1@www.eclipse.org...
>>>>>>>> hi..I follow all the steps written in "An Introduction to Using
>>>>>>>> TPTP's Automated GUI Recorder" document for running test cases in
>>>>>>>> standard mode. but still i m not able to run it .after running
>>>>>>>> nothing happens.can anyone tell me in detail (Step wise)for running
>>>>>>>> test cases in standard mode..
>>>>>>>>
>>>>>>
>>>>>>
>>>>
>>>>
>
>
|
|
|
Re: how to run in standard mode [message #138651 is a reply to message #138640] |
Fri, 21 November 2008 12:38 |
Asha Messages: 28 Registered: July 2009 |
Junior Member |
|
|
I can't install TPTP 4.5 as i m using 3.3 version of eclipse but i will
reinstall everything for TPTP 4.4
Paul Slauenwhite wrote:
> Asha,
> I would suggest that you try reinstallating the TPTP all-in-one
> (http://www.eclipse.org/tptp/home/downloads/?ver=4.5.1) and the AGR (see
>
http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0).
> Paul
> "Asha " <asha@readiminds.com> wrote in message
> news:20618c8f40ff239685c2cb50ba98a99e$1@www.eclipse.org...
>> The error "Invalid preference page path: Icon Style" is not related with
>> automated test cases.Other than that i not getting any error in error log
>> file..
>>
>> Asha wrote:
>>
>>> Hi Paul,
>>
>>> In error log i get error as "Invalid preference page path:
>>> Icon Style" .but i m not able to get test log file, how can i see test
>>> log file.
>>
>>> Paul Slauenwhite wrote:
>>
>>>> Yes, that is the right workspace. Does the context workspace get
>>>> created when you run the test? If not, does the context workbench
>>>> appear? If not, are there any errors in your .log file?
>>
>>>> Paul
>>>> "Asha " <asha@readiminds.com> wrote in message
>>>> news:697466ee4db8588a6e14b6f88c7025e8$1@www.eclipse.org...
>>>>> Hi Paul,
>>>>> I defined behaviour for test cases.the workspace specified is "
>>>>> ${workspace_loc}/../auto-gui-workspace".is this right? Paul Slauenwhite
>>>>> wrote:
>>>>>
>>>>>> Hi Asha,
>>>>>> Do you have a behaviour defined for your test suite? Does the
>>>>>> workspace specified in the AGR test suite editor (Overview tab) get
>>>>>> created?
>>>>>
>>>>>> I would suggest that you have something wrong with your install.
>>>>>> Cna you try reinstalling using these installation instructions:
>>>>>
>>>>>>
>>>>>
>>>
>>
http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0
>>>>>
>>>>>> Paul
>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>> news:7c73259f22a371f60e3402990ce1533f$1@www.eclipse.org...
>>>>>>> Hi, no error is coming.there should be another workbench open when we
>>>>>>> run in standard mode, but in my case the current workbench closed and
>>>>>>> after that nthg happens. and when i open the workbench then i didn'
>>>>>>> get the testsuite.execution file.
>>>>>>>
>>>>>>> Paul Slauenwhite wrote:
>>>>>>>
>>>>>>>> Hi Asha,
>>>>>>>> Do you have a behaviour defined for your test suite? If so,
>>>>>>>> does the context workbench appear? If not, are there any errors in
>>>>>>>> your .log files in both your workspace and the workspace specified
>>>>>>>> in the AGR test suite editor (Overview tab)?
>>>>>>>
>>>>>>>> Paul
>>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>>> news:28899a5bf6b2f6b411895703b9d25683$1@www.eclipse.org...
>>>>>>>>> hi..I follow all the steps written in "An Introduction to Using
>>>>>>>>> TPTP's Automated GUI Recorder" document for running test cases in
>>>>>>>>> standard mode. but still i m not able to run it .after running
>>>>>>>>> nothing happens.can anyone tell me in detail (Step wise)for running
>>>>>>>>> test cases in standard mode..
>>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>
>>>>>
>>
>>
|
|
|
Re: how to run in standard mode [message #138689 is a reply to message #138651] |
Mon, 24 November 2008 10:00 |
Asha Messages: 28 Registered: July 2009 |
Junior Member |
|
|
Hello Paul ,
I installed it again now its showing one error as
('IWAT4039E The Test Execution Harness reported the following
problems:Failed to retrieve the context that should be used to run the
test cases in').what is that
Asha wrote:
> I can't install TPTP 4.5 as i m using 3.3 version of eclipse but i will
> reinstall everything for TPTP 4.4
> Paul Slauenwhite wrote:
>> Asha,
>> I would suggest that you try reinstallating the TPTP all-in-one
>> (http://www.eclipse.org/tptp/home/downloads/?ver=4.5.1) and the AGR (see
>>
>
http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0).
>> Paul
>> "Asha " <asha@readiminds.com> wrote in message
>> news:20618c8f40ff239685c2cb50ba98a99e$1@www.eclipse.org...
>>> The error "Invalid preference page path: Icon Style" is not related with
>>> automated test cases.Other than that i not getting any error in error log
>>> file..
>>>
>>> Asha wrote:
>>>
>>>> Hi Paul,
>>>
>>>> In error log i get error as "Invalid preference page path:
>>>> Icon Style" .but i m not able to get test log file, how can i see test
>>>> log file.
>>>
>>>> Paul Slauenwhite wrote:
>>>
>>>>> Yes, that is the right workspace. Does the context workspace get
>>>>> created when you run the test? If not, does the context workbench
>>>>> appear? If not, are there any errors in your .log file?
>>>
>>>>> Paul
>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>> news:697466ee4db8588a6e14b6f88c7025e8$1@www.eclipse.org...
>>>>>> Hi Paul,
>>>>>> I defined behaviour for test cases.the workspace specified is "
>>>>>> ${workspace_loc}/../auto-gui-workspace".is this right? Paul Slauenwhite
>>>>>> wrote:
>>>>>>
>>>>>>> Hi Asha,
>>>>>>> Do you have a behaviour defined for your test suite? Does the
>>>>>>> workspace specified in the AGR test suite editor (Overview tab) get
>>>>>>> created?
>>>>>>
>>>>>>> I would suggest that you have something wrong with your install.
>>>>>>> Cna you try reinstalling using these installation instructions:
>>>>>>
>>>>>>>
>>>>>>
>>>>
>>>
>
http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0
>>>>>>
>>>>>>> Paul
>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>> news:7c73259f22a371f60e3402990ce1533f$1@www.eclipse.org...
>>>>>>>> Hi, no error is coming.there should be another workbench open when we
>>>>>>>> run in standard mode, but in my case the current workbench closed and
>>>>>>>> after that nthg happens. and when i open the workbench then i didn'
>>>>>>>> get the testsuite.execution file.
>>>>>>>>
>>>>>>>> Paul Slauenwhite wrote:
>>>>>>>>
>>>>>>>>> Hi Asha,
>>>>>>>>> Do you have a behaviour defined for your test suite? If so,
>>>>>>>>> does the context workbench appear? If not, are there any errors in
>>>>>>>>> your .log files in both your workspace and the workspace specified
>>>>>>>>> in the AGR test suite editor (Overview tab)?
>>>>>>>>
>>>>>>>>> Paul
>>>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>>>> news:28899a5bf6b2f6b411895703b9d25683$1@www.eclipse.org...
>>>>>>>>>> hi..I follow all the steps written in "An Introduction to Using
>>>>>>>>>> TPTP's Automated GUI Recorder" document for running test cases in
>>>>>>>>>> standard mode. but still i m not able to run it .after running
>>>>>>>>>> nothing happens.can anyone tell me in detail (Step wise)for running
>>>>>>>>>> test cases in standard mode..
>>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>
>>>>>>
>>>
>>>
|
|
|
Re: how to run in standard mode [message #138710 is a reply to message #138689] |
Mon, 24 November 2008 11:45 |
Paul Slauenwhite Messages: 975 Registered: July 2009 |
Senior Member |
|
|
Hi Asha,
This error is caused by an incorrect/faulty path to the workbench
instance used to run the AGR tests. I believe you have a faulty
configuration.
Note, in TPTP 4.5, the AGR was moved from a Technology Preview component
to an As-Is component. As-Is components are primarily provided for prior
users but imply no support (for example, defects, news group, and mailing
lists). As such, we are unable to debug your problem.
Paul
"Asha " <asha@readiminds.com> wrote in message
news:3ef408ce355c1d1584ccb2e0a8a89bb5$1@www.eclipse.org...
> Hello Paul ,
>
> I installed it again now its showing one error as
> ('IWAT4039E The Test Execution Harness reported the following
> problems:Failed to retrieve the context that should be used to run the
> test cases in').what is that
> Asha wrote:
>
>> I can't install TPTP 4.5 as i m using 3.3 version of eclipse but i will
>> reinstall everything for TPTP 4.4
>> Paul Slauenwhite wrote:
>
>>> Asha,
>>> I would suggest that you try reinstallating the TPTP all-in-one
>>> (http://www.eclipse.org/tptp/home/downloads/?ver=4.5.1) and the AGR (see
>>
> http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0).
>
>>> Paul
>>> "Asha " <asha@readiminds.com> wrote in message
>>> news:20618c8f40ff239685c2cb50ba98a99e$1@www.eclipse.org...
>>>> The error "Invalid preference page path: Icon Style" is not related
>>>> with automated test cases.Other than that i not getting any error in
>>>> error log file..
>>>>
>>>> Asha wrote:
>>>>
>>>>> Hi Paul,
>>>>
>>>>> In error log i get error as "Invalid preference page
>>>>> path: Icon Style" .but i m not able to get test log file, how can i
>>>>> see test log file.
>>>>
>>>>> Paul Slauenwhite wrote:
>>>>
>>>>>> Yes, that is the right workspace. Does the context workspace get
>>>>>> created when you run the test? If not, does the context workbench
>>>>>> appear? If not, are there any errors in your .log file?
>>>>
>>>>>> Paul
>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>> news:697466ee4db8588a6e14b6f88c7025e8$1@www.eclipse.org...
>>>>>>> Hi Paul,
>>>>>>> I defined behaviour for test cases.the workspace specified is
>>>>>>> " ${workspace_loc}/../auto-gui-workspace".is this right? Paul
>>>>>>> Slauenwhite wrote:
>>>>>>>
>>>>>>>> Hi Asha,
>>>>>>>> Do you have a behaviour defined for your test suite? Does the
>>>>>>>> workspace specified in the AGR test suite editor (Overview tab) get
>>>>>>>> created?
>>>>>>>
>>>>>>>> I would suggest that you have something wrong with your
>>>>>>>> install. Cna you try reinstalling using these installation
>>>>>>>> instructions:
>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>
>>>>
>>
> http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0
>>>>>>>
>>>>>>>> Paul
>>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>>> news:7c73259f22a371f60e3402990ce1533f$1@www.eclipse.org...
>>>>>>>>> Hi, no error is coming.there should be another workbench open when
>>>>>>>>> we run in standard mode, but in my case the current workbench
>>>>>>>>> closed and after that nthg happens. and when i open the workbench
>>>>>>>>> then i didn' get the testsuite.execution file.
>>>>>>>>>
>>>>>>>>> Paul Slauenwhite wrote:
>>>>>>>>>
>>>>>>>>>> Hi Asha,
>>>>>>>>>> Do you have a behaviour defined for your test suite? If so,
>>>>>>>>>> does the context workbench appear? If not, are there any errors
>>>>>>>>>> in your .log files in both your workspace and the workspace
>>>>>>>>>> specified in the AGR test suite editor (Overview tab)?
>>>>>>>>>
>>>>>>>>>> Paul
>>>>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>>>>> news:28899a5bf6b2f6b411895703b9d25683$1@www.eclipse.org...
>>>>>>>>>>> hi..I follow all the steps written in "An Introduction to Using
>>>>>>>>>>> TPTP's Automated GUI Recorder" document for running test cases
>>>>>>>>>>> in standard mode. but still i m not able to run it .after
>>>>>>>>>>> running nothing happens.can anyone tell me in detail (Step
>>>>>>>>>>> wise)for running test cases in standard mode..
>>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>>
>>>>
>>>>
>
>
|
|
|
Re: how to run in standard mode [message #138759 is a reply to message #138710] |
Tue, 25 November 2008 05:18 |
Asha Messages: 28 Registered: July 2009 |
Junior Member |
|
|
hello Paul,
Now i m able to run in standard mode.yesterday i didn't
restart my system after intalling all things. now its running but it
always failed.
Paul Slauenwhite wrote:
> Hi Asha,
> This error is caused by an incorrect/faulty path to the workbench
> instance used to run the AGR tests. I believe you have a faulty
> configuration.
> Note, in TPTP 4.5, the AGR was moved from a Technology Preview component
> to an As-Is component. As-Is components are primarily provided for prior
> users but imply no support (for example, defects, news group, and mailing
> lists). As such, we are unable to debug your problem.
> Paul
> "Asha " <asha@readiminds.com> wrote in message
> news:3ef408ce355c1d1584ccb2e0a8a89bb5$1@www.eclipse.org...
>> Hello Paul ,
>>
>> I installed it again now its showing one error as
>> ('IWAT4039E The Test Execution Harness reported the following
>> problems:Failed to retrieve the context that should be used to run the
>> test cases in').what is that
>> Asha wrote:
>>
>>> I can't install TPTP 4.5 as i m using 3.3 version of eclipse but i will
>>> reinstall everything for TPTP 4.4
>>> Paul Slauenwhite wrote:
>>
>>>> Asha,
>>>> I would suggest that you try reinstallating the TPTP all-in-one
>>>> (http://www.eclipse.org/tptp/home/downloads/?ver=4.5.1) and the AGR (see
>>>
>>
http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0).
>>
>>>> Paul
>>>> "Asha " <asha@readiminds.com> wrote in message
>>>> news:20618c8f40ff239685c2cb50ba98a99e$1@www.eclipse.org...
>>>>> The error "Invalid preference page path: Icon Style" is not related
>>>>> with automated test cases.Other than that i not getting any error in
>>>>> error log file..
>>>>>
>>>>> Asha wrote:
>>>>>
>>>>>> Hi Paul,
>>>>>
>>>>>> In error log i get error as "Invalid preference page
>>>>>> path: Icon Style" .but i m not able to get test log file, how can i
>>>>>> see test log file.
>>>>>
>>>>>> Paul Slauenwhite wrote:
>>>>>
>>>>>>> Yes, that is the right workspace. Does the context workspace get
>>>>>>> created when you run the test? If not, does the context workbench
>>>>>>> appear? If not, are there any errors in your .log file?
>>>>>
>>>>>>> Paul
>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>> news:697466ee4db8588a6e14b6f88c7025e8$1@www.eclipse.org...
>>>>>>>> Hi Paul,
>>>>>>>> I defined behaviour for test cases.the workspace specified is
>>>>>>>> " ${workspace_loc}/../auto-gui-workspace".is this right? Paul
>>>>>>>> Slauenwhite wrote:
>>>>>>>>
>>>>>>>>> Hi Asha,
>>>>>>>>> Do you have a behaviour defined for your test suite? Does the
>>>>>>>>> workspace specified in the AGR test suite editor (Overview tab) get
>>>>>>>>> created?
>>>>>>>>
>>>>>>>>> I would suggest that you have something wrong with your
>>>>>>>>> install. Cna you try reinstalling using these installation
>>>>>>>>> instructions:
>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>
>>>>>
>>>
>>
http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0
>>>>>>>>
>>>>>>>>> Paul
>>>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>>>> news:7c73259f22a371f60e3402990ce1533f$1@www.eclipse.org...
>>>>>>>>>> Hi, no error is coming.there should be another workbench open when
>>>>>>>>>> we run in standard mode, but in my case the current workbench
>>>>>>>>>> closed and after that nthg happens. and when i open the workbench
>>>>>>>>>> then i didn' get the testsuite.execution file.
>>>>>>>>>>
>>>>>>>>>> Paul Slauenwhite wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi Asha,
>>>>>>>>>>> Do you have a behaviour defined for your test suite? If so,
>>>>>>>>>>> does the context workbench appear? If not, are there any errors
>>>>>>>>>>> in your .log files in both your workspace and the workspace
>>>>>>>>>>> specified in the AGR test suite editor (Overview tab)?
>>>>>>>>>>
>>>>>>>>>>> Paul
>>>>>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>>>>>> news:28899a5bf6b2f6b411895703b9d25683$1@www.eclipse.org...
>>>>>>>>>>>> hi..I follow all the steps written in "An Introduction to Using
>>>>>>>>>>>> TPTP's Automated GUI Recorder" document for running test cases
>>>>>>>>>>>> in standard mode. but still i m not able to run it .after
>>>>>>>>>>>> running nothing happens.can anyone tell me in detail (Step
>>>>>>>>>>>> wise)for running test cases in standard mode..
>>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>
>>>>>
>>
>>
|
|
|
Re: how to run in standard mode [message #138771 is a reply to message #138759] |
Tue, 25 November 2008 11:28 |
Paul Slauenwhite Messages: 975 Registered: July 2009 |
Senior Member |
|
|
Asha, good news. I would suggest that there is something wrong with your
recording to cause the failure.
Paul
"Asha " <asha@readiminds.com> wrote in message
news:1ecb977c124d7d17611a89bca34216db$1@www.eclipse.org...
> hello Paul,
> Now i m able to run in standard mode.yesterday i didn't
> restart my system after intalling all things. now its running but it
> always failed.
>
> Paul Slauenwhite wrote:
>
>> Hi Asha,
>> This error is caused by an incorrect/faulty path to the workbench
>> instance used to run the AGR tests. I believe you have a faulty
>> configuration.
>
>> Note, in TPTP 4.5, the AGR was moved from a Technology Preview
>> component to an As-Is component. As-Is components are primarily provided
>> for prior users but imply no support (for example, defects, news group,
>> and mailing lists). As such, we are unable to debug your problem.
>
>> Paul
>> "Asha " <asha@readiminds.com> wrote in message
>> news:3ef408ce355c1d1584ccb2e0a8a89bb5$1@www.eclipse.org...
>>> Hello Paul ,
>>>
>>> I installed it again now its showing one error as
>>> ('IWAT4039E The Test Execution Harness reported the following
>>> problems:Failed to retrieve the context that should be used to run the
>>> test cases in').what is that
>>> Asha wrote:
>>>
>>>> I can't install TPTP 4.5 as i m using 3.3 version of eclipse but i
>>>> will reinstall everything for TPTP 4.4
>>>> Paul Slauenwhite wrote:
>>>
>>>>> Asha,
>>>>> I would suggest that you try reinstallating the TPTP all-in-one
>>>>> (http://www.eclipse.org/tptp/home/downloads/?ver=4.5.1) and the AGR
>>>>> (see
>>>>
>>>
> http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0).
>>>
>>>>> Paul
>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>> news:20618c8f40ff239685c2cb50ba98a99e$1@www.eclipse.org...
>>>>>> The error "Invalid preference page path: Icon Style" is not related
>>>>>> with automated test cases.Other than that i not getting any error in
>>>>>> error log file..
>>>>>>
>>>>>> Asha wrote:
>>>>>>
>>>>>>> Hi Paul,
>>>>>>
>>>>>>> In error log i get error as "Invalid preference page
>>>>>>> path: Icon Style" .but i m not able to get test log file, how can i
>>>>>>> see test log file.
>>>>>>
>>>>>>> Paul Slauenwhite wrote:
>>>>>>
>>>>>>>> Yes, that is the right workspace. Does the context workspace get
>>>>>>>> created when you run the test? If not, does the context workbench
>>>>>>>> appear? If not, are there any errors in your .log file?
>>>>>>
>>>>>>>> Paul
>>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>>> news:697466ee4db8588a6e14b6f88c7025e8$1@www.eclipse.org...
>>>>>>>>> Hi Paul,
>>>>>>>>> I defined behaviour for test cases.the workspace specified
>>>>>>>>> is " ${workspace_loc}/../auto-gui-workspace".is this right? Paul
>>>>>>>>> Slauenwhite wrote:
>>>>>>>>>
>>>>>>>>>> Hi Asha,
>>>>>>>>>> Do you have a behaviour defined for your test suite? Does
>>>>>>>>>> the workspace specified in the AGR test suite editor (Overview
>>>>>>>>>> tab) get created?
>>>>>>>>>
>>>>>>>>>> I would suggest that you have something wrong with your
>>>>>>>>>> install. Cna you try reinstalling using these installation
>>>>>>>>>> instructions:
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>
>>>>
>>>
> http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0
>>>>>>>>>
>>>>>>>>>> Paul
>>>>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>>>>> news:7c73259f22a371f60e3402990ce1533f$1@www.eclipse.org...
>>>>>>>>>>> Hi, no error is coming.there should be another workbench open
>>>>>>>>>>> when we run in standard mode, but in my case the current
>>>>>>>>>>> workbench closed and after that nthg happens. and when i open
>>>>>>>>>>> the workbench then i didn' get the testsuite.execution file.
>>>>>>>>>>>
>>>>>>>>>>> Paul Slauenwhite wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi Asha,
>>>>>>>>>>>> Do you have a behaviour defined for your test suite? If
>>>>>>>>>>>> so, does the context workbench appear? If not, are there any
>>>>>>>>>>>> errors in your .log files in both your workspace and the
>>>>>>>>>>>> workspace specified in the AGR test suite editor (Overview
>>>>>>>>>>>> tab)?
>>>>>>>>>>>
>>>>>>>>>>>> Paul
>>>>>>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>>>>>>> news:28899a5bf6b2f6b411895703b9d25683$1@www.eclipse.org...
>>>>>>>>>>>>> hi..I follow all the steps written in "An Introduction to
>>>>>>>>>>>>> Using TPTP's Automated GUI Recorder" document for running test
>>>>>>>>>>>>> cases in standard mode. but still i m not able to run it
>>>>>>>>>>>>> .after running nothing happens.can anyone tell me in detail
>>>>>>>>>>>>> (Step wise)for running test cases in standard mode..
>>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>
>>>>>>
>>>
>>>
>
>
|
|
|
Re: how to run in standard mode [message #138784 is a reply to message #138771] |
Wed, 26 November 2008 03:56 |
Asha Messages: 28 Registered: July 2009 |
Junior Member |
|
|
the test cases which i have created running fine in quick mode but in
standard mode it showing error as
There was an error while running the macro associated with the test case:
Test. org.eclipse.core.runtime.CoreException: Error while executing a
macro command: MacroCommand [item-expand, line 3]
at
org.eclipse.tptp.test.auto.gui.internal.commands.MacroComman dShell.createPlaybackException(MacroCommandShell.java:1261)
at
org.eclipse.tptp.test.auto.gui.internal.commands.MacroComman dShell.access$11(MacroCommandShell.java:1258)
at
org.eclipse.tptp.test.auto.gui.internal.commands.MacroComman dShell$4.run(MacroCommandShell.java:1214)
at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:3 5)
at
org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchr onizer.java:123)
at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.jav a:3659)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java :3296)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.jav a:2389)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:22 19)
at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
at
org.eclipse.core.databinding.observable.Realm.runWithDefault (Realm.java:289)
at
org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Work bench.java:461)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.j ava:149)
at
org.eclipse.ui.internal.ide.application.IDEApplication.start (IDEApplication.java:106)
at
org.eclipse.equinox.internal.app.EclipseAppHandle.run(Eclips eAppHandle.java:153)
at
org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher .runApplication(EclipseAppLauncher.java:106)
at
org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher .start(EclipseAppLauncher.java:76)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseS tarter.java:363)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseS tarter.java:176)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java: 504)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:443)
at org.eclipse.equinox.launcher.Main.run(Main.java:1169)
at org.eclipse.equinox.launcher.Main.main(Main.java:1144)
at org.eclipse.core.launcher.Main.main(Main.java:30)
Paul Slauenwhite wrote:
> Asha, good news. I would suggest that there is something wrong with your
> recording to cause the failure.
> Paul
> "Asha " <asha@readiminds.com> wrote in message
> news:1ecb977c124d7d17611a89bca34216db$1@www.eclipse.org...
>> hello Paul,
>> Now i m able to run in standard mode.yesterday i didn't
>> restart my system after intalling all things. now its running but it
>> always failed.
>>
>> Paul Slauenwhite wrote:
>>
>>> Hi Asha,
>>> This error is caused by an incorrect/faulty path to the workbench
>>> instance used to run the AGR tests. I believe you have a faulty
>>> configuration.
>>
>>> Note, in TPTP 4.5, the AGR was moved from a Technology Preview
>>> component to an As-Is component. As-Is components are primarily provided
>>> for prior users but imply no support (for example, defects, news group,
>>> and mailing lists). As such, we are unable to debug your problem.
>>
>>> Paul
>>> "Asha " <asha@readiminds.com> wrote in message
>>> news:3ef408ce355c1d1584ccb2e0a8a89bb5$1@www.eclipse.org...
>>>> Hello Paul ,
>>>>
>>>> I installed it again now its showing one error as
>>>> ('IWAT4039E The Test Execution Harness reported the following
>>>> problems:Failed to retrieve the context that should be used to run the
>>>> test cases in').what is that
>>>> Asha wrote:
>>>>
>>>>> I can't install TPTP 4.5 as i m using 3.3 version of eclipse but i
>>>>> will reinstall everything for TPTP 4.4
>>>>> Paul Slauenwhite wrote:
>>>>
>>>>>> Asha,
>>>>>> I would suggest that you try reinstallating the TPTP all-in-one
>>>>>> (http://www.eclipse.org/tptp/home/downloads/?ver=4.5.1) and the AGR
>>>>>> (see
>>>>>
>>>>
>>
http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0).
>>>>
>>>>>> Paul
>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>> news:20618c8f40ff239685c2cb50ba98a99e$1@www.eclipse.org...
>>>>>>> The error "Invalid preference page path: Icon Style" is not related
>>>>>>> with automated test cases.Other than that i not getting any error in
>>>>>>> error log file..
>>>>>>>
>>>>>>> Asha wrote:
>>>>>>>
>>>>>>>> Hi Paul,
>>>>>>>
>>>>>>>> In error log i get error as "Invalid preference page
>>>>>>>> path: Icon Style" .but i m not able to get test log file, how can i
>>>>>>>> see test log file.
>>>>>>>
>>>>>>>> Paul Slauenwhite wrote:
>>>>>>>
>>>>>>>>> Yes, that is the right workspace. Does the context workspace get
>>>>>>>>> created when you run the test? If not, does the context workbench
>>>>>>>>> appear? If not, are there any errors in your .log file?
>>>>>>>
>>>>>>>>> Paul
>>>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>>>> news:697466ee4db8588a6e14b6f88c7025e8$1@www.eclipse.org...
>>>>>>>>>> Hi Paul,
>>>>>>>>>> I defined behaviour for test cases.the workspace specified
>>>>>>>>>> is " ${workspace_loc}/../auto-gui-workspace".is this right? Paul
>>>>>>>>>> Slauenwhite wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi Asha,
>>>>>>>>>>> Do you have a behaviour defined for your test suite? Does
>>>>>>>>>>> the workspace specified in the AGR test suite editor (Overview
>>>>>>>>>>> tab) get created?
>>>>>>>>>>
>>>>>>>>>>> I would suggest that you have something wrong with your
>>>>>>>>>>> install. Cna you try reinstalling using these installation
>>>>>>>>>>> instructions:
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>
>>>>
>>
http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0
>>>>>>>>>>
>>>>>>>>>>> Paul
>>>>>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>>>>>> news:7c73259f22a371f60e3402990ce1533f$1@www.eclipse.org...
>>>>>>>>>>>> Hi, no error is coming.there should be another workbench open
>>>>>>>>>>>> when we run in standard mode, but in my case the current
>>>>>>>>>>>> workbench closed and after that nthg happens. and when i open
>>>>>>>>>>>> the workbench then i didn' get the testsuite.execution file.
>>>>>>>>>>>>
>>>>>>>>>>>> Paul Slauenwhite wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Asha,
>>>>>>>>>>>>> Do you have a behaviour defined for your test suite? If
>>>>>>>>>>>>> so, does the context workbench appear? If not, are there any
>>>>>>>>>>>>> errors in your .log files in both your workspace and the
>>>>>>>>>>>>> workspace specified in the AGR test suite editor (Overview
>>>>>>>>>>>>> tab)?
>>>>>>>>>>>>
>>>>>>>>>>>>> Paul
>>>>>>>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>>>>>>>> news:28899a5bf6b2f6b411895703b9d25683$1@www.eclipse.org...
>>>>>>>>>>>>>> hi..I follow all the steps written in "An Introduction to
>>>>>>>>>>>>>> Using TPTP's Automated GUI Recorder" document for running test
>>>>>>>>>>>>>> cases in standard mode. but still i m not able to run it
>>>>>>>>>>>>>> .after running nothing happens.can anyone tell me in detail
>>>>>>>>>>>>>> (Step wise)for running test cases in standard mode..
>>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>>>
>>>>
>>>>
>>
>>
|
|
|
Re: how to run in standard mode [message #138797 is a reply to message #138784] |
Wed, 26 November 2008 12:00 |
Paul Slauenwhite Messages: 975 Registered: July 2009 |
Senior Member |
|
|
Asha,
Check line 3 for what widget/view/dialog/etc. it is using. Often, the
local workbench (quick mode) has preferences (eliminating certain dialogs
asking to set the preferences) or resources in the workspace that are not in
the context workbench/workspace, thereby causing failures when running in
standard mode. Always start recording in a new workspace, simulating the
running the running environment.
Paul
"Asha " <asha@readiminds.com> wrote in message
news:7ff9bed2e02bced3464a38bd82d11e8f$1@www.eclipse.org...
> the test cases which i have created running fine in quick mode but in
> standard mode it showing error as
> There was an error while running the macro associated with the test case:
> Test. org.eclipse.core.runtime.CoreException: Error while executing a
> macro command: MacroCommand [item-expand, line 3]
> at
> org.eclipse.tptp.test.auto.gui.internal.commands.MacroComman dShell.createPlaybackException(MacroCommandShell.java:1261)
> at
> org.eclipse.tptp.test.auto.gui.internal.commands.MacroComman dShell.access$11(MacroCommandShell.java:1258)
> at
> org.eclipse.tptp.test.auto.gui.internal.commands.MacroComman dShell$4.run(MacroCommandShell.java:1214)
> at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:3 5)
> at
> org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchr onizer.java:123)
> at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.jav a:3659)
> at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java :3296)
> at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.jav a:2389)
> at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
> at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:22 19)
> at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
> at
> org.eclipse.core.databinding.observable.Realm.runWithDefault (Realm.java:289)
> at
> org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Work bench.java:461)
> at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.j ava:149)
> at
> org.eclipse.ui.internal.ide.application.IDEApplication.start (IDEApplication.java:106)
> at
> org.eclipse.equinox.internal.app.EclipseAppHandle.run(Eclips eAppHandle.java:153)
> at
> org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher .runApplication(EclipseAppLauncher.java:106)
> at
> org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher .start(EclipseAppLauncher.java:76)
> at
> org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseS tarter.java:363)
> at
> org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseS tarter.java:176)
> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
> at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
> at java.lang.reflect.Method.invoke(Unknown Source)
> at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java: 504)
> at org.eclipse.equinox.launcher.Main.basicRun(Main.java:443)
> at org.eclipse.equinox.launcher.Main.run(Main.java:1169)
> at org.eclipse.equinox.launcher.Main.main(Main.java:1144)
> at org.eclipse.core.launcher.Main.main(Main.java:30)
>
> Paul Slauenwhite wrote:
>
>> Asha, good news. I would suggest that there is something wrong with your
>> recording to cause the failure.
>
>> Paul
>> "Asha " <asha@readiminds.com> wrote in message
>> news:1ecb977c124d7d17611a89bca34216db$1@www.eclipse.org...
>>> hello Paul,
>>> Now i m able to run in standard mode.yesterday i didn't
>>> restart my system after intalling all things. now its running but it
>>> always failed.
>>>
>>> Paul Slauenwhite wrote:
>>>
>>>> Hi Asha,
>>>> This error is caused by an incorrect/faulty path to the workbench
>>>> instance used to run the AGR tests. I believe you have a faulty
>>>> configuration.
>>>
>>>> Note, in TPTP 4.5, the AGR was moved from a Technology Preview
>>>> component to an As-Is component. As-Is components are primarily
>>>> provided for prior users but imply no support (for example, defects,
>>>> news group, and mailing lists). As such, we are unable to debug your
>>>> problem.
>>>
>>>> Paul
>>>> "Asha " <asha@readiminds.com> wrote in message
>>>> news:3ef408ce355c1d1584ccb2e0a8a89bb5$1@www.eclipse.org...
>>>>> Hello Paul ,
>>>>>
>>>>> I installed it again now its showing one error as
>>>>> ('IWAT4039E The Test Execution Harness reported the following
>>>>> problems:Failed to retrieve the context that should be used to run the
>>>>> test cases in').what is that
>>>>> Asha wrote:
>>>>>
>>>>>> I can't install TPTP 4.5 as i m using 3.3 version of eclipse but i
>>>>>> will reinstall everything for TPTP 4.4
>>>>>> Paul Slauenwhite wrote:
>>>>>
>>>>>>> Asha,
>>>>>>> I would suggest that you try reinstallating the TPTP all-in-one
>>>>>>> (http://www.eclipse.org/tptp/home/downloads/?ver=4.5.1) and the AGR
>>>>>>> (see
>>>>>>
>>>>>
>>>
> http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0).
>>>>>
>>>>>>> Paul
>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>> news:20618c8f40ff239685c2cb50ba98a99e$1@www.eclipse.org...
>>>>>>>> The error "Invalid preference page path: Icon Style" is not related
>>>>>>>> with automated test cases.Other than that i not getting any error
>>>>>>>> in error log file..
>>>>>>>>
>>>>>>>> Asha wrote:
>>>>>>>>
>>>>>>>>> Hi Paul,
>>>>>>>>
>>>>>>>>> In error log i get error as "Invalid preference page
>>>>>>>>> path: Icon Style" .but i m not able to get test log file, how can
>>>>>>>>> i see test log file.
>>>>>>>>
>>>>>>>>> Paul Slauenwhite wrote:
>>>>>>>>
>>>>>>>>>> Yes, that is the right workspace. Does the context workspace get
>>>>>>>>>> created when you run the test? If not, does the context
>>>>>>>>>> workbench appear? If not, are there any errors in your .log
>>>>>>>>>> file?
>>>>>>>>
>>>>>>>>>> Paul
>>>>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>>>>> news:697466ee4db8588a6e14b6f88c7025e8$1@www.eclipse.org...
>>>>>>>>>>> Hi Paul,
>>>>>>>>>>> I defined behaviour for test cases.the workspace
>>>>>>>>>>> specified is " ${workspace_loc}/../auto-gui-workspace".is this
>>>>>>>>>>> right? Paul Slauenwhite wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi Asha,
>>>>>>>>>>>> Do you have a behaviour defined for your test suite? Does
>>>>>>>>>>>> the workspace specified in the AGR test suite editor (Overview
>>>>>>>>>>>> tab) get created?
>>>>>>>>>>>
>>>>>>>>>>>> I would suggest that you have something wrong with your
>>>>>>>>>>>> install. Cna you try reinstalling using these installation
>>>>>>>>>>>> instructions:
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>
>>>>>
>>>
> http://www.eclipse.org/tptp/test/documents/gettingstarted/Au tomated_GUI_Recorder_Getting_Started.html#2.0
>>>>>>>>>>>
>>>>>>>>>>>> Paul
>>>>>>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>>>>>>> news:7c73259f22a371f60e3402990ce1533f$1@www.eclipse.org...
>>>>>>>>>>>>> Hi, no error is coming.there should be another workbench open
>>>>>>>>>>>>> when we run in standard mode, but in my case the current
>>>>>>>>>>>>> workbench closed and after that nthg happens. and when i open
>>>>>>>>>>>>> the workbench then i didn' get the testsuite.execution file.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Paul Slauenwhite wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Asha,
>>>>>>>>>>>>>> Do you have a behaviour defined for your test suite? If
>>>>>>>>>>>>>> so, does the context workbench appear? If not, are there any
>>>>>>>>>>>>>> errors in your .log files in both your workspace and the
>>>>>>>>>>>>>> workspace specified in the AGR test suite editor (Overview
>>>>>>>>>>>>>> tab)?
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Paul
>>>>>>>>>>>>>> "Asha " <asha@readiminds.com> wrote in message
>>>>>>>>>>>>>> news:28899a5bf6b2f6b411895703b9d25683$1@www.eclipse.org...
>>>>>>>>>>>>>>> hi..I follow all the steps written in "An Introduction to
>>>>>>>>>>>>>>> Using TPTP's Automated GUI Recorder" document for running
>>>>>>>>>>>>>>> test cases in standard mode. but still i m not able to run
>>>>>>>>>>>>>>> it .after running nothing happens.can anyone tell me in
>>>>>>>>>>>>>>> detail (Step wise)for running test cases in standard mode..
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>
>>>>>
>>>
>>>
>
>
|
|
|
Goto Forum:
Current Time: Thu Sep 26 16:03:32 GMT 2024
Powered by FUDForum. Page generated in 0.05477 seconds
|