Skip to main content


Eclipse Community Forums
Forum Search:

Search      Help    Register    Login    Home
Home » Language IDEs » PHP Development Tools (PDT) » not suspend when debugging with xdebug(plz help me)
not suspend when debugging with xdebug [message #524220] Wed, 31 March 2010 08:24 Go to next message
No way is currently offline No wayFriend
Messages: 5
Registered: March 2010
Junior Member
Hi, everybody.

I using PDT 2.1 with all package and Xdebug. Everything seems okay, but Eclipse wasn't suspend at break point or first line when I was debugging.
This is image:
http://i97.photobucket.com/albums/l236/cinhat_2006/3-31-20103-21-39PM.png

Thanks.
Re: not suspend when debugging with xdebug [message #524228 is a reply to message #524220] Wed, 31 March 2010 09:01 Go to previous messageGo to next message
Eclipse UserFriend
Originally posted by: dkel50.hotremovemail.com

Try reading
http://www.eclipse.org/pdt/documents/XDebugGuideForPDT2.0.pd f

Dave Kelsey

On 31/03/10 09:24, No way wrote:
> Hi, everybody.
>
> I using PDT 2.1 with all package and Xdebug. Everything seems okay, but
> Eclipse wasn't suspend at break point or first line when I was debugging.
> This is image:
>
>
> Thanks.
Re: not suspend when debugging with xdebug [message #524237 is a reply to message #524220] Wed, 31 March 2010 09:41 Go to previous messageGo to next message
No way is currently offline No wayFriend
Messages: 5
Registered: March 2010
Junior Member
thank you, Dave.

I had read this guide.
I don't know way to eclipse suspend as this image in this guide.

Sry for my dump.

I try debug script but eclipse terminal, not suspend as this guide.

http://i97.photobucket.com/albums/l236/cinhat_2006/temp/3-31-20104-38-34PM.png
Re: not suspend when debugging with xdebug [message #524255 is a reply to message #524220] Wed, 31 March 2010 05:52 Go to previous messageGo to next message
Eclipse UserFriend
Originally posted by: dkel50.hotremovemail.com

Ensure xdebug is loaded and configured correctly. run a script with
phpinfo() in it to get the output.

If you are php 5.2 ensure you load xdebug with the appropriate
zend_extension or zend_extension_ts call in php.ini depending on whether
you are using thread safe or non thread safe.

if you are php 5.3 ensure you use just zend_extension.

try using the xdebug calls such as xdebug_break() in your script to see
if that suspends

Dave Kelsey

On 31/03/10 09:24, No way wrote:
> Hi, everybody.
>
> I using PDT 2.1 with all package and Xdebug. Everything seems okay, but
> Eclipse wasn't suspend at break point or first line when I was debugging.
> This is image:
>
>
> Thanks.
Re: not suspend when debugging with xdebug [message #524256 is a reply to message #524220] Wed, 31 March 2010 05:52 Go to previous messageGo to next message
Eclipse UserFriend
Originally posted by: dkel50.hotremovemail.com

Also ensure that zend_optimiser is not enabled, check out the FAQ at
http://www.xdebug.org for more info.

Dave Kelsey

On 31/03/10 09:24, No way wrote:
> Hi, everybody.
>
> I using PDT 2.1 with all package and Xdebug. Everything seems okay, but
> Eclipse wasn't suspend at break point or first line when I was debugging.
> This is image:
>
>
> Thanks.
Re: not suspend when debugging with xdebug [message #524450 is a reply to message #524220] Thu, 01 April 2010 02:26 Go to previous messageGo to next message
No way is currently offline No wayFriend
Messages: 5
Registered: March 2010
Junior Member
thank you, Dave.

I sure Xdebug configured and loaded corectly.
This is parametter of Xdebug in phpinfo(); and I don't install Zend Optimizer.

this is configure in php.ini
[XDEBUG]
;xDebug Configuration starts
zend_extension_ts = "C:\wamp\bin\php\php5.2.11\ext\php_xdebug-2.1.0beta3-5.2-vc6.dll"

xdebug.profiler_output_dir = "c:\wamp\tmp\xdebug"
xdebug.profiler_output_name = "cachegrind.out.%p"
xdebug.profiler_enable = 0
xdebug.profiler_append=0
xdebug.extended_info=1
xdebug.remote_enable=true
xdebug.remote_handler="dbgp"
xdebug.remote_mode=req
xdebug.remote_host="localhost"
xdebug.remote_port=10001
xdebug.idekey="XDebug"
xdebug.remote_log="c:\wamp\tmp\xdebug\xdebug_remot.log"
xdebug.show_exception_trace=0
xdebug.show_local_vars=1
xdebug.show_mem_delta=0
xdebug.trace_format=0

;xDebug Configuration ends 


Xdebug parametters:
http://i97.photobucket.com/albums/l236/cinhat_2006/temp/4-1-20109-15-42AM.png

and error themes:
http://i97.photobucket.com/albums/l236/cinhat_2006/temp/4-1-20109-19-31AM.png
Re: not suspend when debugging with xdebug [message #524538 is a reply to message #524450] Thu, 01 April 2010 10:24 Go to previous messageGo to next message
Eclipse UserFriend
Originally posted by: dkel50.hotremovemail.com

I see you are capturing the log from xdebug could you post that from a
run that fails ?

Cheers
Dave Kelsey

On 01/04/10 03:26, No way wrote:
> thank you, Dave.
>
> I sure Xdebug configured and loaded corectly. This is parametter of
> Xdebug in phpinfo(); and I don't install Zend Optimizer.
>
> this is configure in php.ini
>
> [XDEBUG]
> ;xDebug Configuration starts
> zend_extension_ts =
> " C:\wamp\bin\php\php5.2.11\ext\php_xdebug-2.1.0beta3-5.2-vc6. dll "
>
> xdebug.profiler_output_dir = "c:\wamp\tmp\xdebug"
> xdebug.profiler_output_name = "cachegrind.out.%p"
> xdebug.profiler_enable = 0
> xdebug.profiler_append=0
> xdebug.extended_info=1
> xdebug.remote_enable=true
> xdebug.remote_handler="dbgp"
> xdebug.remote_mode=req
> xdebug.remote_host="localhost"
> xdebug.remote_port=10001
> xdebug.idekey="XDebug"
> xdebug.remote_log="c:\wamp\tmp\xdebug\xdebug_remot.log"
> xdebug.show_exception_trace=0
> xdebug.show_local_vars=1
> xdebug.show_mem_delta=0
> xdebug.trace_format=0
>
> ;xDebug Configuration ends
>
> Xdebug parametters:
>
>
> and error themes:
>
Re: not suspend when debugging with xdebug [message #524717 is a reply to message #524538] Fri, 02 April 2010 01:50 Go to previous messageGo to next message
No way is currently offline No wayFriend
Messages: 5
Registered: March 2010
Junior Member
yes, that's right. I created a error when running a web page to see error themes of Xdebug.

Eclipse User wrote on Thu, 01 April 2010 06:24
Originally posted by: dkel50.hotremovemail.com

I see you are capturing the log from xdebug could you post that from a
run that fails ?

Cheers
Dave Kelsey
>

Re: not suspend when debugging with xdebug [message #524807 is a reply to message #524717] Fri, 02 April 2010 15:23 Go to previous messageGo to next message
Eclipse UserFriend
Originally posted by: dkel50.hotremovemail.com

Sorry I think you misunderstood. Can you post the output in the log of
you trying to run a web page to debug ?

Dave Kelsey

On 02/04/10 02:50, No way wrote:
> yes, that's right. I created a error when running a web page to see
> error themes of Xdebug.
>
> Eclipse User wrote on Thu, 01 April 2010 06:24
>> Originally posted by: dkel50.hotremovemail.com
>>
>> I see you are capturing the log from xdebug could you post that from a
>> run that fails ?
>>
>> Cheers
>> Dave Kelsey
>> >
>
>
Re: not suspend when debugging with xdebug [message #524863 is a reply to message #524807] Sat, 03 April 2010 04:20 Go to previous messageGo to next message
No way is currently offline No wayFriend
Messages: 5
Registered: March 2010
Junior Member
thank Dave,

this is log of xdebug:
-> <init xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" fileuri="file:///C:/wamp/www/testdebug/test.php" language="PHP" protocol_version="1.0" appid="2104" session="127002765789012" idekey="ECLIPSE_DBGP"><engine version="2.1.0rc1-dev"><![CDATA[Xdebug]]></engine><author><![CDATA[Derick Rethans]]></author><url><![CDATA[http://xdebug.org]]></url><copyright><![CDATA[Copyright (c) 2002-2010 by Derick Rethans]]></copyright></init>

<- feature_set -i 143 -n show_hidden -v 1
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_set" transaction_id="143" feature="show_hidden" success="1"></response>

<- feature_set -i 144 -n max_depth -v 3
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_set" transaction_id="144" feature="max_depth" success="1"></response>

<- feature_set -i 145 -n max_children -v 31
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_set" transaction_id="145" feature="max_children" success="1"></response>

<- feature_get -i 146 -n encoding
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_get" transaction_id="146" feature_name="encoding" supported="1"><![CDATA[iso-8859-1]]></response>

<- feature_get -i 147 -n supports_async
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_get" transaction_id="147" feature_name="supports_async" supported="1"><![CDATA[0]]></response>

<- stdout -i 148 -c 1
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="stdout" transaction_id="148" success="1"></response>

<- stderr -i 149 -c 1
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="stderr" transaction_id="149" success="0"></response>

<- breakpoint_set -i 150 -t line -f file:///C:%5Cwamp%5Cwww%5Ctestdebug%5Ctest.php -n 4
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="breakpoint_set" transaction_id="150" id="21040001"></response>

<- step_into -i 151
-> <stream xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" type="stdout" encoding="base64"><![CDATA[Mw==]]></stream>

-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="step_into" transaction_id="151" status="stopping" reason="ok"></response>

<- stop -i 152
-> <response xmlns="urn:debugger_protocol_v1" xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="stop" transaction_id="152" status="stopped" reason="ok"></response>

Re: not suspend when debugging with xdebug [message #525301 is a reply to message #524863] Tue, 06 April 2010 03:28 Go to previous message
Eclipse UserFriend
Originally posted by: dkel50.hotremovemail.com

The output shows me that PDT is doing everything correctly. I see a
breakpoint being set on line 4 for c:\wamp\www\testdebug\test.php and I
see that is the initial script being executed. I see it doing a step
into which means it should stop at the first line but doesn't. I also
see a value of 3 being output. Could you post your script just in case I
there is something there that may cause the problem.

I don't know why this isn't working. Did you try adding an
xdebug_break(); line into your code and see if that works ? The only
other thing I can suggest is you try the xdebug mailing list and see if
you can get some help there.

Dave Kelsey

On 03/04/10 05:20, No way wrote:
> thank Dave,
>
> this is log of xdebug:
>
> -> <init xmlns="urn:debugger_protocol_v1"
> xmlns:xdebug="http://xdebug.org/dbgp/xdebug"
> fileuri="file:///C:/wamp/www/testdebug/test.php" language="PHP"
> protocol_version="1.0" appid="2104" session="127002765789012"
> idekey="ECLIPSE_DBGP"><engine
> version="2.1.0rc1-dev"><![CDATA[Xdebug]]></engine><author ><![CDATA[Derick Rethans]]></author><url><![CDATA[http://xdebug.org]]></url><copyright><![CDATA[Copyright
> (c) 2002-2010 by Derick Rethans]]></copyright></init>
>
> <- feature_set -i 143 -n show_hidden -v 1
> -> <response xmlns="urn:debugger_protocol_v1"
> xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_set"
> transaction_id="143" feature="show_hidden" success="1"></response>
>
> <- feature_set -i 144 -n max_depth -v 3
> -> <response xmlns="urn:debugger_protocol_v1"
> xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_set"
> transaction_id="144" feature="max_depth" success="1"></response>
>
> <- feature_set -i 145 -n max_children -v 31
> -> <response xmlns="urn:debugger_protocol_v1"
> xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_set"
> transaction_id="145" feature="max_children" success="1"></response>
>
> <- feature_get -i 146 -n encoding
> -> <response xmlns="urn:debugger_protocol_v1"
> xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_get"
> transaction_id="146" feature_name="encoding"
> supported="1"><![CDATA[iso-8859-1]]></response>
>
> <- feature_get -i 147 -n supports_async
> -> <response xmlns="urn:debugger_protocol_v1"
> xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="feature_get"
> transaction_id="147" feature_name="supports_async"
> supported="1"><![CDATA[0]]></response>
>
> <- stdout -i 148 -c 1
> -> <response xmlns="urn:debugger_protocol_v1"
> xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="stdout"
> transaction_id="148" success="1"></response>
>
> <- stderr -i 149 -c 1
> -> <response xmlns="urn:debugger_protocol_v1"
> xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="stderr"
> transaction_id="149" success="0"></response>
>
> <- breakpoint_set -i 150 -t line -f
> file:///C:%5Cwamp%5Cwww%5Ctestdebug%5Ctest.php -n 4
> -> <response xmlns="urn:debugger_protocol_v1"
> xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="breakpoint_set"
> transaction_id="150" id="21040001"></response>
>
> <- step_into -i 151
> -> <stream xmlns="urn:debugger_protocol_v1"
> xmlns:xdebug="http://xdebug.org/dbgp/xdebug" type="stdout"
> encoding="base64"><![CDATA[Mw==]]></stream>
>
> -> <response xmlns="urn:debugger_protocol_v1"
> xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="step_into"
> transaction_id="151" status="stopping" reason="ok"></response>
>
> <- stop -i 152
> -> <response xmlns="urn:debugger_protocol_v1"
> xmlns:xdebug="http://xdebug.org/dbgp/xdebug" command="stop"
> transaction_id="152" status="stopped" reason="ok"></response>
>
>
Previous Topic:Setting debug script variables
Next Topic:Autocomplete HTML/CSS
Goto Forum:
  


Current Time: Wed Oct 09 18:39:05 GMT 2024

Powered by FUDForum. Page generated in 0.06063 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.2.
Copyright ©2001-2010 FUDforum Bulletin Board Software

Back to the top