Home » Archived » GMT (Generative Modeling Technologies) » [Epsilon][Eugenia]Multiple compartments problem
| | |
Re: [Epsilon][Eugenia]Multiple compartments problem [message #385200 is a reply to message #385196] |
Wed, 27 August 2008 11:45 |
Louis Rose Messages: 440 Registered: July 2009 Location: York, United Kingdom |
Senior Member |
|
|
Louis Rose wrote:
> Kimon Polychroniadis wrote:
>> O/H Kimon Polychroniadis έγραψε:
>>> Hello,
>>>
>>> I seem to be having a problem with inclusion relationships. In
>>> previous versions of EuGENia, I didnt have any problem but now I get
>>> an error message. The class is the following:
>>>
>>> @gmf.diagram
>>> @gmf.node(label="name")
>>> class MyModel{
>>> attr String name;
>>> @gmf.compartment
>>> val StaticView[*] structuralElements;
>>> @gmf.compartment
>>> val DynamicView[*] dynamicElements;
>>> @gmf.compartment
>>> val OrganizationalView[*] organizationalElements;
>>> @gmf.compartment
>>> val MyModel[*] modelViews;
>>> }
>>>
>>> The error message is "Node is referenced from multiple containers
>>> with different 'List Layout' values".
>>>
>>> Could you give me any hint on what is the problem?
>>>
>>> Best regards,
>>> Kimon
>> No ideas so far?? :(
>>
>> K.
>
> Hi Kimon,
>
> Apologies for the delay; Dimitrios is on vacation, and I've been unwell
> this week. I shall take a look at this now, and determine what the
> problem is.
>
> Many thanks,
> Louis.
Hi Kimon,
I've been able to reproduce the problem - it seems to be originating
from the GMF validation of the generator model.
For the source your provided above, I believe it is safe to ignore this
error message, and generate the diagram editor.
When Dimitrios is back from his vacation, we will investigate further
and see if there is a better solution to this problem.
Let us know if encounter any further problems.
Many thanks,
Louis.
|
|
|
Re: [Epsilon][Eugenia]Multiple compartments problem [message #385202 is a reply to message #385200] |
Wed, 27 August 2008 12:40 |
Kimon Polychroniadis Messages: 30 Registered: July 2009 |
Member |
|
|
You are right, the diagram editor seems to work just fine, despite the
error messages..!!
Thank you very much for your help,
K.
O/H Louis Rose έγραψε:
> Louis Rose wrote:
>> Kimon Polychroniadis wrote:
>>> O/H Kimon Polychroniadis έγραψε:
>>>> Hello,
>>>>
>>>> I seem to be having a problem with inclusion relationships. In
>>>> previous versions of EuGENia, I didnt have any problem but now I get
>>>> an error message. The class is the following:
>>>>
>>>> @gmf.diagram
>>>> @gmf.node(label="name")
>>>> class MyModel{
>>>> attr String name;
>>>> @gmf.compartment
>>>> val StaticView[*] structuralElements;
>>>> @gmf.compartment
>>>> val DynamicView[*] dynamicElements;
>>>> @gmf.compartment
>>>> val OrganizationalView[*] organizationalElements;
>>>> @gmf.compartment
>>>> val MyModel[*] modelViews;
>>>> }
>>>>
>>>> The error message is "Node is referenced from multiple containers
>>>> with different 'List Layout' values".
>>>>
>>>> Could you give me any hint on what is the problem?
>>>>
>>>> Best regards,
>>>> Kimon
>>> No ideas so far?? :(
>>>
>>> K.
>>
>> Hi Kimon,
>>
>> Apologies for the delay; Dimitrios is on vacation, and I've been
>> unwell this week. I shall take a look at this now, and determine what
>> the problem is.
>>
>> Many thanks,
>> Louis.
>
> Hi Kimon,
>
> I've been able to reproduce the problem - it seems to be originating
> from the GMF validation of the generator model.
>
> For the source your provided above, I believe it is safe to ignore this
> error message, and generate the diagram editor.
>
> When Dimitrios is back from his vacation, we will investigate further
> and see if there is a better solution to this problem.
>
> Let us know if encounter any further problems.
>
> Many thanks,
> Louis.
|
|
|
Re: [Epsilon][Eugenia]Multiple compartments problem [message #385284 is a reply to message #385202] |
Sat, 30 August 2008 07:18 |
Dimitrios Kolovos Messages: 1776 Registered: July 2009 |
Senior Member |
|
|
Hi Kimon,
I've seen this message before but in all cases it was - as Louis
suggested - safe to just ignore it. I'll investigate a bit more on its
meaning in the next few days.
Cheers,
Dimitrios
Kimon Polychroniadis wrote:
> You are right, the diagram editor seems to work just fine, despite the
> error messages..!!
>
> Thank you very much for your help,
> K.
>
> O/H Louis Rose έγραψε:
>> Louis Rose wrote:
>>> Kimon Polychroniadis wrote:
>>>> O/H Kimon Polychroniadis έγραψε:
>>>>> Hello,
>>>>>
>>>>> I seem to be having a problem with inclusion relationships. In
>>>>> previous versions of EuGENia, I didnt have any problem but now I
>>>>> get an error message. The class is the following:
>>>>>
>>>>> @gmf.diagram
>>>>> @gmf.node(label="name")
>>>>> class MyModel{
>>>>> attr String name;
>>>>> @gmf.compartment
>>>>> val StaticView[*] structuralElements;
>>>>> @gmf.compartment
>>>>> val DynamicView[*] dynamicElements;
>>>>> @gmf.compartment
>>>>> val OrganizationalView[*] organizationalElements;
>>>>> @gmf.compartment
>>>>> val MyModel[*] modelViews;
>>>>> }
>>>>>
>>>>> The error message is "Node is referenced from multiple containers
>>>>> with different 'List Layout' values".
>>>>>
>>>>> Could you give me any hint on what is the problem?
>>>>>
>>>>> Best regards,
>>>>> Kimon
>>>> No ideas so far?? :(
>>>>
>>>> K.
>>>
>>> Hi Kimon,
>>>
>>> Apologies for the delay; Dimitrios is on vacation, and I've been
>>> unwell this week. I shall take a look at this now, and determine what
>>> the problem is.
>>>
>>> Many thanks,
>>> Louis.
>>
>> Hi Kimon,
>>
>> I've been able to reproduce the problem - it seems to be originating
>> from the GMF validation of the generator model.
>>
>> For the source your provided above, I believe it is safe to ignore
>> this error message, and generate the diagram editor.
>>
>> When Dimitrios is back from his vacation, we will investigate further
>> and see if there is a better solution to this problem.
>>
>> Let us know if encounter any further problems.
>>
>> Many thanks,
>> Louis.
|
|
|
Re: [Epsilon][Eugenia]Multiple compartments problem [message #385299 is a reply to message #385284] |
Sat, 30 August 2008 07:49 |
Dimitrios Kolovos Messages: 1776 Registered: July 2009 |
Senior Member |
|
|
As a general remark about the latest EuGENia-related posts, I should
remind that posts about Epsilon should be prefixed with [Epsilon] only
and not with [Epsilon][xxx] (where xxx a language or tool provided by
Epsilon) as indicated in www.eclipse.org/gmt/epsilon.
This is dictated by the structure of the GMT project and the newsgroup
policy (http://wiki.eclipse.org/index.php/GMT).
Cheers,
Dimitrios
Dimitrios Kolovos wrote:
> Hi Kimon,
>
> I've seen this message before but in all cases it was - as Louis
> suggested - safe to just ignore it. I'll investigate a bit more on its
> meaning in the next few days.
>
> Cheers,
> Dimitrios
>
> Kimon Polychroniadis wrote:
>> You are right, the diagram editor seems to work just fine, despite the
>> error messages..!!
>>
>> Thank you very much for your help,
>> K.
>>
>> O/H Louis Rose έγραψε:
>>> Louis Rose wrote:
>>>> Kimon Polychroniadis wrote:
>>>>> O/H Kimon Polychroniadis έγραψε:
>>>>>> Hello,
>>>>>>
>>>>>> I seem to be having a problem with inclusion relationships. In
>>>>>> previous versions of EuGENia, I didnt have any problem but now I
>>>>>> get an error message. The class is the following:
>>>>>>
>>>>>> @gmf.diagram
>>>>>> @gmf.node(label="name")
>>>>>> class MyModel{
>>>>>> attr String name;
>>>>>> @gmf.compartment
>>>>>> val StaticView[*] structuralElements;
>>>>>> @gmf.compartment
>>>>>> val DynamicView[*] dynamicElements;
>>>>>> @gmf.compartment
>>>>>> val OrganizationalView[*] organizationalElements;
>>>>>> @gmf.compartment
>>>>>> val MyModel[*] modelViews;
>>>>>> }
>>>>>>
>>>>>> The error message is "Node is referenced from multiple containers
>>>>>> with different 'List Layout' values".
>>>>>>
>>>>>> Could you give me any hint on what is the problem?
>>>>>>
>>>>>> Best regards,
>>>>>> Kimon
>>>>> No ideas so far?? :(
>>>>>
>>>>> K.
>>>>
>>>> Hi Kimon,
>>>>
>>>> Apologies for the delay; Dimitrios is on vacation, and I've been
>>>> unwell this week. I shall take a look at this now, and determine
>>>> what the problem is.
>>>>
>>>> Many thanks,
>>>> Louis.
>>>
>>> Hi Kimon,
>>>
>>> I've been able to reproduce the problem - it seems to be originating
>>> from the GMF validation of the generator model.
>>>
>>> For the source your provided above, I believe it is safe to ignore
>>> this error message, and generate the diagram editor.
>>>
>>> When Dimitrios is back from his vacation, we will investigate further
>>> and see if there is a better solution to this problem.
>>>
>>> Let us know if encounter any further problems.
>>>
>>> Many thanks,
>>> Louis.
|
|
| | |
Re: [Epsilon][Eugenia]Multiple compartments problem [message #620441 is a reply to message #385196] |
Wed, 27 August 2008 11:45 |
Louis Rose Messages: 440 Registered: July 2009 Location: York, United Kingdom |
Senior Member |
|
|
Louis Rose wrote:
> Kimon Polychroniadis wrote:
>> O/H Kimon Polychroniadis έγραψε:
>>> Hello,
>>>
>>> I seem to be having a problem with inclusion relationships. In
>>> previous versions of EuGENia, I didnt have any problem but now I get
>>> an error message. The class is the following:
>>>
>>> @gmf.diagram
>>> @gmf.node(label="name")
>>> class MyModel{
>>> attr String name;
>>> @gmf.compartment
>>> val StaticView[*] structuralElements;
>>> @gmf.compartment
>>> val DynamicView[*] dynamicElements;
>>> @gmf.compartment
>>> val OrganizationalView[*] organizationalElements;
>>> @gmf.compartment
>>> val MyModel[*] modelViews;
>>> }
>>>
>>> The error message is "Node is referenced from multiple containers
>>> with different 'List Layout' values".
>>>
>>> Could you give me any hint on what is the problem?
>>>
>>> Best regards,
>>> Kimon
>> No ideas so far?? :(
>>
>> K.
>
> Hi Kimon,
>
> Apologies for the delay; Dimitrios is on vacation, and I've been unwell
> this week. I shall take a look at this now, and determine what the
> problem is.
>
> Many thanks,
> Louis.
Hi Kimon,
I've been able to reproduce the problem - it seems to be originating
from the GMF validation of the generator model.
For the source your provided above, I believe it is safe to ignore this
error message, and generate the diagram editor.
When Dimitrios is back from his vacation, we will investigate further
and see if there is a better solution to this problem.
Let us know if encounter any further problems.
Many thanks,
Louis.
|
|
|
Re: [Epsilon][Eugenia]Multiple compartments problem [message #620445 is a reply to message #385200] |
Wed, 27 August 2008 12:40 |
Kimon Polychroniadis Messages: 30 Registered: July 2009 |
Member |
|
|
You are right, the diagram editor seems to work just fine, despite the
error messages..!!
Thank you very much for your help,
K.
O/H Louis Rose έγραψε:
> Louis Rose wrote:
>> Kimon Polychroniadis wrote:
>>> O/H Kimon Polychroniadis έγραψε:
>>>> Hello,
>>>>
>>>> I seem to be having a problem with inclusion relationships. In
>>>> previous versions of EuGENia, I didnt have any problem but now I get
>>>> an error message. The class is the following:
>>>>
>>>> @gmf.diagram
>>>> @gmf.node(label="name")
>>>> class MyModel{
>>>> attr String name;
>>>> @gmf.compartment
>>>> val StaticView[*] structuralElements;
>>>> @gmf.compartment
>>>> val DynamicView[*] dynamicElements;
>>>> @gmf.compartment
>>>> val OrganizationalView[*] organizationalElements;
>>>> @gmf.compartment
>>>> val MyModel[*] modelViews;
>>>> }
>>>>
>>>> The error message is "Node is referenced from multiple containers
>>>> with different 'List Layout' values".
>>>>
>>>> Could you give me any hint on what is the problem?
>>>>
>>>> Best regards,
>>>> Kimon
>>> No ideas so far?? :(
>>>
>>> K.
>>
>> Hi Kimon,
>>
>> Apologies for the delay; Dimitrios is on vacation, and I've been
>> unwell this week. I shall take a look at this now, and determine what
>> the problem is.
>>
>> Many thanks,
>> Louis.
>
> Hi Kimon,
>
> I've been able to reproduce the problem - it seems to be originating
> from the GMF validation of the generator model.
>
> For the source your provided above, I believe it is safe to ignore this
> error message, and generate the diagram editor.
>
> When Dimitrios is back from his vacation, we will investigate further
> and see if there is a better solution to this problem.
>
> Let us know if encounter any further problems.
>
> Many thanks,
> Louis.
|
|
|
Re: [Epsilon][Eugenia]Multiple compartments problem [message #621681 is a reply to message #385202] |
Sat, 30 August 2008 07:18 |
Dimitrios Kolovos Messages: 1776 Registered: July 2009 |
Senior Member |
|
|
Hi Kimon,
I've seen this message before but in all cases it was - as Louis
suggested - safe to just ignore it. I'll investigate a bit more on its
meaning in the next few days.
Cheers,
Dimitrios
Kimon Polychroniadis wrote:
> You are right, the diagram editor seems to work just fine, despite the
> error messages..!!
>
> Thank you very much for your help,
> K.
>
> O/H Louis Rose έγραψε:
>> Louis Rose wrote:
>>> Kimon Polychroniadis wrote:
>>>> O/H Kimon Polychroniadis έγραψε:
>>>>> Hello,
>>>>>
>>>>> I seem to be having a problem with inclusion relationships. In
>>>>> previous versions of EuGENia, I didnt have any problem but now I
>>>>> get an error message. The class is the following:
>>>>>
>>>>> @gmf.diagram
>>>>> @gmf.node(label="name")
>>>>> class MyModel{
>>>>> attr String name;
>>>>> @gmf.compartment
>>>>> val StaticView[*] structuralElements;
>>>>> @gmf.compartment
>>>>> val DynamicView[*] dynamicElements;
>>>>> @gmf.compartment
>>>>> val OrganizationalView[*] organizationalElements;
>>>>> @gmf.compartment
>>>>> val MyModel[*] modelViews;
>>>>> }
>>>>>
>>>>> The error message is "Node is referenced from multiple containers
>>>>> with different 'List Layout' values".
>>>>>
>>>>> Could you give me any hint on what is the problem?
>>>>>
>>>>> Best regards,
>>>>> Kimon
>>>> No ideas so far?? :(
>>>>
>>>> K.
>>>
>>> Hi Kimon,
>>>
>>> Apologies for the delay; Dimitrios is on vacation, and I've been
>>> unwell this week. I shall take a look at this now, and determine what
>>> the problem is.
>>>
>>> Many thanks,
>>> Louis.
>>
>> Hi Kimon,
>>
>> I've been able to reproduce the problem - it seems to be originating
>> from the GMF validation of the generator model.
>>
>> For the source your provided above, I believe it is safe to ignore
>> this error message, and generate the diagram editor.
>>
>> When Dimitrios is back from his vacation, we will investigate further
>> and see if there is a better solution to this problem.
>>
>> Let us know if encounter any further problems.
>>
>> Many thanks,
>> Louis.
|
|
|
Re: [Epsilon][Eugenia]Multiple compartments problem [message #621687 is a reply to message #385284] |
Sat, 30 August 2008 07:49 |
Dimitrios Kolovos Messages: 1776 Registered: July 2009 |
Senior Member |
|
|
As a general remark about the latest EuGENia-related posts, I should
remind that posts about Epsilon should be prefixed with [Epsilon] only
and not with [Epsilon][xxx] (where xxx a language or tool provided by
Epsilon) as indicated in www.eclipse.org/gmt/epsilon.
This is dictated by the structure of the GMT project and the newsgroup
policy (http://wiki.eclipse.org/index.php/GMT).
Cheers,
Dimitrios
Dimitrios Kolovos wrote:
> Hi Kimon,
>
> I've seen this message before but in all cases it was - as Louis
> suggested - safe to just ignore it. I'll investigate a bit more on its
> meaning in the next few days.
>
> Cheers,
> Dimitrios
>
> Kimon Polychroniadis wrote:
>> You are right, the diagram editor seems to work just fine, despite the
>> error messages..!!
>>
>> Thank you very much for your help,
>> K.
>>
>> O/H Louis Rose έγραψε:
>>> Louis Rose wrote:
>>>> Kimon Polychroniadis wrote:
>>>>> O/H Kimon Polychroniadis έγραψε:
>>>>>> Hello,
>>>>>>
>>>>>> I seem to be having a problem with inclusion relationships. In
>>>>>> previous versions of EuGENia, I didnt have any problem but now I
>>>>>> get an error message. The class is the following:
>>>>>>
>>>>>> @gmf.diagram
>>>>>> @gmf.node(label="name")
>>>>>> class MyModel{
>>>>>> attr String name;
>>>>>> @gmf.compartment
>>>>>> val StaticView[*] structuralElements;
>>>>>> @gmf.compartment
>>>>>> val DynamicView[*] dynamicElements;
>>>>>> @gmf.compartment
>>>>>> val OrganizationalView[*] organizationalElements;
>>>>>> @gmf.compartment
>>>>>> val MyModel[*] modelViews;
>>>>>> }
>>>>>>
>>>>>> The error message is "Node is referenced from multiple containers
>>>>>> with different 'List Layout' values".
>>>>>>
>>>>>> Could you give me any hint on what is the problem?
>>>>>>
>>>>>> Best regards,
>>>>>> Kimon
>>>>> No ideas so far?? :(
>>>>>
>>>>> K.
>>>>
>>>> Hi Kimon,
>>>>
>>>> Apologies for the delay; Dimitrios is on vacation, and I've been
>>>> unwell this week. I shall take a look at this now, and determine
>>>> what the problem is.
>>>>
>>>> Many thanks,
>>>> Louis.
>>>
>>> Hi Kimon,
>>>
>>> I've been able to reproduce the problem - it seems to be originating
>>> from the GMF validation of the generator model.
>>>
>>> For the source your provided above, I believe it is safe to ignore
>>> this error message, and generate the diagram editor.
>>>
>>> When Dimitrios is back from his vacation, we will investigate further
>>> and see if there is a better solution to this problem.
>>>
>>> Let us know if encounter any further problems.
>>>
>>> Many thanks,
>>> Louis.
|
|
|
Goto Forum:
Current Time: Wed Sep 25 21:30:17 GMT 2024
Powered by FUDForum. Page generated in 0.08063 seconds
|