Home » Archived » OHF » question on STEM
question on STEM [message #31750] |
Fri, 13 July 2007 15:40 |
Eclipse User |
|
|
|
Originally posted by: araratjan.yahoo.com
Hi,
I am not sure how many of you guys use the new recently released version
of STEM, but anyway, here it goes. I am not able to create my own
scenarios. Here is what i was doing (steps):
New -> STEM project -> entered the name
After this, I am not able to add new scenarios, models, etc. It would not
recognize the project I already created -- "Invalid name" -- although the
name is exactly the same as the project name I created. Am I doind
something wrong?
Thanks for help!
AA
|
|
| |
Re: question on STEM [message #32244 is a reply to message #32103] |
Thu, 19 July 2007 19:09 |
Eclipse User |
|
|
|
Originally posted by: araratjan.geocities.com
Hi Dan,
Thanks for the reply. This is my logic/approach to creating a new project:
First thing needed to be created, I thought, was a Project, because all
other pieces (e.g. scenario, model) need to have a project to be "housed"
in. I presume this is the correct approach. So, I click on New -->
Project, then give a name to the project (e.g. flu). Now, in Stem Project
Explorer window I have a project named flu. When I expand that folder, I
have 5 subfolders: decorators, graphs, models, scenarios, sequencers.
Then, I try to populate these folders by right-clicking and choosing New
Wizards --> Other and then trying to select an appropriate task. But this
is when the my project flu is not recognized. Maybe I am doing something
wrong all along?
Any help is greatly appreciated!
Thanks,
Armen
|
|
|
Re: question on STEM [message #32279 is a reply to message #32244] |
Thu, 19 July 2007 20:15 |
Daniel Ford Messages: 148 Registered: July 2009 Location: New York |
Senior Member |
|
|
Armen,
I just went through these steps and it worked for me :-) The wizards
display an error message of "Invalid Name" if the name of the things you're
trying to create is blank or otherwise invalid. The name of the project is
selectable from the combo box listing all projects. What happens when you
enter a name for a graph or model?
Dan
--
Daniel Ford
IBM Almaden Research Center
San Jose, CA
"Armen" <araratjan@geocities.com> wrote in message
news:367327c728bbd0b0735242893e7dcd10$1@www.eclipse.org...
> Hi Dan,
>
> Thanks for the reply. This is my logic/approach to creating a new project:
>
> First thing needed to be created, I thought, was a Project, because all
> other pieces (e.g. scenario, model) need to have a project to be "housed"
> in. I presume this is the correct approach. So, I click on New -->
> Project, then give a name to the project (e.g. flu). Now, in Stem Project
> Explorer window I have a project named flu. When I expand that folder, I
> have 5 subfolders: decorators, graphs, models, scenarios, sequencers.
> Then, I try to populate these folders by right-clicking and choosing New
> Wizards --> Other and then trying to select an appropriate task. But this
> is when the my project flu is not recognized. Maybe I am doing something
> wrong all along?
>
> Any help is greatly appreciated!
>
> Thanks,
>
> Armen
>
|
|
|
Re: question on STEM [message #32314 is a reply to message #32279] |
Fri, 20 July 2007 14:43 |
Eclipse User |
|
|
|
Originally posted by: araratjan.yahoo.com
Hi Dan,
I am still getting the error "Invalid name" for the Project even though
that project is shown in STEM project explorer... Is it possible to post a
step-by-step guide to creating a new project?
Thanks a lot!
Armen
|
|
|
Re: question on STEM [message #32349 is a reply to message #32314] |
Fri, 20 July 2007 18:20 |
Daniel Ford Messages: 148 Registered: July 2009 Location: New York |
Senior Member |
|
|
Armen,
there is a bug open for the creating project tutorial
https://bugs.eclipse.org/bugs/show_bug.cgi?id=188398
I'm having trouble visualizing exactly what the problem is. Is it that when
you use the new project wizard it rejects the name you supply as invalid?
Or is it when you use a different wizard, say to create a model, it doesn't
allow you to select an existing project?
Either is a bug, but not one I'm seeing on Windows, perhaps there's some
Linux issue. Could you enter a bug report please and describe how to
reproduce it.
In the later case, however, note that a message of "Invalid Name" refers to
the name of the new thing being created not the project. Only valid
projects appear in the combo box and their names would not be reported as
invalid.
Dan
--
Daniel Ford
IBM Almaden Research Center
San Jose, CA
"armen" <araratjan@yahoo.com> wrote in message
news:a7ec16880e0a24aa7c5f2b98ad76de7e$1@www.eclipse.org...
> Hi Dan,
>
> I am still getting the error "Invalid name" for the Project even though
> that project is shown in STEM project explorer... Is it possible to post a
> step-by-step guide to creating a new project?
>
> Thanks a lot!
>
> Armen
>
|
|
|
Re: question on STEM [message #32384 is a reply to message #32349] |
Fri, 20 July 2007 19:30 |
Eclipse User |
|
|
|
Originally posted by: araratjan.yahoo.com
I see now where my mistake was. I thought that "invalid name" referred to
the project name, but it simply meant that I have not yet specified a name
fo rthe scenario/model/etc... I think the screen could be more intiutive:
i.e. instead of saying "invalied name" it could say "enter a valid name".
Thanks for the clarification.
|
|
| | |
Re: question on STEM [message #580272 is a reply to message #32103] |
Thu, 19 July 2007 19:09 |
Eclipse User |
|
|
|
Originally posted by: araratjan.geocities.com
Hi Dan,
Thanks for the reply. This is my logic/approach to creating a new project:
First thing needed to be created, I thought, was a Project, because all
other pieces (e.g. scenario, model) need to have a project to be "housed"
in. I presume this is the correct approach. So, I click on New -->
Project, then give a name to the project (e.g. flu). Now, in Stem Project
Explorer window I have a project named flu. When I expand that folder, I
have 5 subfolders: decorators, graphs, models, scenarios, sequencers.
Then, I try to populate these folders by right-clicking and choosing New
Wizards --> Other and then trying to select an appropriate task. But this
is when the my project flu is not recognized. Maybe I am doing something
wrong all along?
Any help is greatly appreciated!
Thanks,
Armen
|
|
|
Re: question on STEM [message #580293 is a reply to message #32244] |
Thu, 19 July 2007 20:15 |
Daniel Ford Messages: 148 Registered: July 2009 Location: New York |
Senior Member |
|
|
Armen,
I just went through these steps and it worked for me :-) The wizards
display an error message of "Invalid Name" if the name of the things you're
trying to create is blank or otherwise invalid. The name of the project is
selectable from the combo box listing all projects. What happens when you
enter a name for a graph or model?
Dan
--
Daniel Ford
IBM Almaden Research Center
San Jose, CA
"Armen" <araratjan@geocities.com> wrote in message
news:367327c728bbd0b0735242893e7dcd10$1@www.eclipse.org...
> Hi Dan,
>
> Thanks for the reply. This is my logic/approach to creating a new project:
>
> First thing needed to be created, I thought, was a Project, because all
> other pieces (e.g. scenario, model) need to have a project to be "housed"
> in. I presume this is the correct approach. So, I click on New -->
> Project, then give a name to the project (e.g. flu). Now, in Stem Project
> Explorer window I have a project named flu. When I expand that folder, I
> have 5 subfolders: decorators, graphs, models, scenarios, sequencers.
> Then, I try to populate these folders by right-clicking and choosing New
> Wizards --> Other and then trying to select an appropriate task. But this
> is when the my project flu is not recognized. Maybe I am doing something
> wrong all along?
>
> Any help is greatly appreciated!
>
> Thanks,
>
> Armen
>
|
|
| |
Re: question on STEM [message #580337 is a reply to message #32314] |
Fri, 20 July 2007 18:20 |
Daniel Ford Messages: 148 Registered: July 2009 Location: New York |
Senior Member |
|
|
Armen,
there is a bug open for the creating project tutorial
https://bugs.eclipse.org/bugs/show_bug.cgi?id=188398
I'm having trouble visualizing exactly what the problem is. Is it that when
you use the new project wizard it rejects the name you supply as invalid?
Or is it when you use a different wizard, say to create a model, it doesn't
allow you to select an existing project?
Either is a bug, but not one I'm seeing on Windows, perhaps there's some
Linux issue. Could you enter a bug report please and describe how to
reproduce it.
In the later case, however, note that a message of "Invalid Name" refers to
the name of the new thing being created not the project. Only valid
projects appear in the combo box and their names would not be reported as
invalid.
Dan
--
Daniel Ford
IBM Almaden Research Center
San Jose, CA
"armen" <araratjan@yahoo.com> wrote in message
news:a7ec16880e0a24aa7c5f2b98ad76de7e$1@www.eclipse.org...
> Hi Dan,
>
> I am still getting the error "Invalid name" for the Project even though
> that project is shown in STEM project explorer... Is it possible to post a
> step-by-step guide to creating a new project?
>
> Thanks a lot!
>
> Armen
>
|
|
| | |
Goto Forum:
Current Time: Mon Sep 23 23:56:28 GMT 2024
Powered by FUDForum. Page generated in 0.03479 seconds
|