Skip to main content


Eclipse Community Forums

      Home
Home » Archived » BIRT » PageCount with bookmark(PageCount with bookmark)
PageCount with bookmark [message #748331] Mon, 24 October 2011 12:34 Go to next message
Eclipse UserFriend
HI,



We created a report with two tables in such a way , that the date from first table is displayed in HTML and from the second is displayed in Excel, to have this differentiation we introduced a bookmark between these two tables.

IN rptdocumnet we display total page count and that counts the number of pages for both the tables, is there any way we can count only the pages from first table till bookmark and exclude second table as it goes to excel .

Can we get sample code for this to be included in our rptdesign files.

Thanks,
KKP
Re: PageCount with bookmark [message #748366 is a reply to message #748331] Mon, 24 October 2011 13:02 Go to previous messageGo to next message
Eclipse UserFriend
You could try to use a page script and page variables for this. Look at
the attached example that puts a custom page n of m in the header. The
script looks for instances of the first table header in the output
before incrementing current page and page total.

Jason

On 10/24/2011 12:34 PM, kkp wrote:
> HI,
>
>
>
> We created a report with two tables in such a way , that the date from
> first table is displayed in HTML and from the second is displayed in
> Excel, to have this differentiation we introduced a bookmark between
> these two tables.
>
> IN rptdocumnet we display total page count and that counts the number of
> pages for both the tables, is there any way we can count only the pages
> from first table till bookmark and exclude second table as it goes to
> excel .
>
> Can we get sample code for this to be included in our rptdesign files.
>
> Thanks,
> KKP
Re: PageCount with bookmark [message #748370 is a reply to message #748331] Mon, 24 October 2011 13:02 Go to previous messageGo to next message
Eclipse UserFriend
You could try to use a page script and page variables for this. Look at
the attached example that puts a custom page n of m in the header. The
script looks for instances of the first table header in the output
before incrementing current page and page total.

Jason

On 10/24/2011 12:34 PM, kkp wrote:
> HI,
>
>
>
> We created a report with two tables in such a way , that the date from
> first table is displayed in HTML and from the second is displayed in
> Excel, to have this differentiation we introduced a bookmark between
> these two tables.
>
> IN rptdocumnet we display total page count and that counts the number of
> pages for both the tables, is there any way we can count only the pages
> from first table till bookmark and exclude second table as it goes to
> excel .
>
> Can we get sample code for this to be included in our rptdesign files.
>
> Thanks,
> KKP
Re: PageCount with bookmark [message #748374 is a reply to message #748331] Mon, 24 October 2011 13:02 Go to previous messageGo to next message
Eclipse UserFriend
You could try to use a page script and page variables for this. Look at
the attached example that puts a custom page n of m in the header. The
script looks for instances of the first table header in the output
before incrementing current page and page total.

Jason

On 10/24/2011 12:34 PM, kkp wrote:
> HI,
>
>
>
> We created a report with two tables in such a way , that the date from
> first table is displayed in HTML and from the second is displayed in
> Excel, to have this differentiation we introduced a bookmark between
> these two tables.
>
> IN rptdocumnet we display total page count and that counts the number of
> pages for both the tables, is there any way we can count only the pages
> from first table till bookmark and exclude second table as it goes to
> excel .
>
> Can we get sample code for this to be included in our rptdesign files.
>
> Thanks,
> KKP
Re: PageCount with bookmark [message #748377 is a reply to message #748331] Mon, 24 October 2011 13:02 Go to previous messageGo to next message
Eclipse UserFriend
You could try to use a page script and page variables for this. Look at
the attached example that puts a custom page n of m in the header. The
script looks for instances of the first table header in the output
before incrementing current page and page total.

Jason

On 10/24/2011 12:34 PM, kkp wrote:
> HI,
>
>
>
> We created a report with two tables in such a way , that the date from
> first table is displayed in HTML and from the second is displayed in
> Excel, to have this differentiation we introduced a bookmark between
> these two tables.
>
> IN rptdocumnet we display total page count and that counts the number of
> pages for both the tables, is there any way we can count only the pages
> from first table till bookmark and exclude second table as it goes to
> excel .
>
> Can we get sample code for this to be included in our rptdesign files.
>
> Thanks,
> KKP
Re: PageCount with bookmark [message #748382 is a reply to message #748331] Mon, 24 October 2011 13:02 Go to previous messageGo to next message
Eclipse UserFriend
You could try to use a page script and page variables for this. Look at
the attached example that puts a custom page n of m in the header. The
script looks for instances of the first table header in the output
before incrementing current page and page total.

Jason

On 10/24/2011 12:34 PM, kkp wrote:
> HI,
>
>
>
> We created a report with two tables in such a way , that the date from
> first table is displayed in HTML and from the second is displayed in
> Excel, to have this differentiation we introduced a bookmark between
> these two tables.
>
> IN rptdocumnet we display total page count and that counts the number of
> pages for both the tables, is there any way we can count only the pages
> from first table till bookmark and exclude second table as it goes to
> excel .
>
> Can we get sample code for this to be included in our rptdesign files.
>
> Thanks,
> KKP
Re: PageCount with bookmark [message #748386 is a reply to message #748331] Mon, 24 October 2011 13:02 Go to previous messageGo to next message
Eclipse UserFriend
You could try to use a page script and page variables for this. Look at
the attached example that puts a custom page n of m in the header. The
script looks for instances of the first table header in the output
before incrementing current page and page total.

Jason

On 10/24/2011 12:34 PM, kkp wrote:
> HI,
>
>
>
> We created a report with two tables in such a way , that the date from
> first table is displayed in HTML and from the second is displayed in
> Excel, to have this differentiation we introduced a bookmark between
> these two tables.
>
> IN rptdocumnet we display total page count and that counts the number of
> pages for both the tables, is there any way we can count only the pages
> from first table till bookmark and exclude second table as it goes to
> excel .
>
> Can we get sample code for this to be included in our rptdesign files.
>
> Thanks,
> KKP
Re: PageCount with bookmark [message #748390 is a reply to message #748331] Mon, 24 October 2011 13:02 Go to previous messageGo to next message
Eclipse UserFriend
You could try to use a page script and page variables for this. Look at
the attached example that puts a custom page n of m in the header. The
script looks for instances of the first table header in the output
before incrementing current page and page total.

Jason

On 10/24/2011 12:34 PM, kkp wrote:
> HI,
>
>
>
> We created a report with two tables in such a way , that the date from
> first table is displayed in HTML and from the second is displayed in
> Excel, to have this differentiation we introduced a bookmark between
> these two tables.
>
> IN rptdocumnet we display total page count and that counts the number of
> pages for both the tables, is there any way we can count only the pages
> from first table till bookmark and exclude second table as it goes to
> excel .
>
> Can we get sample code for this to be included in our rptdesign files.
>
> Thanks,
> KKP
Re: PageCount with bookmark [message #748393 is a reply to message #748331] Mon, 24 October 2011 13:02 Go to previous messageGo to next message
Eclipse UserFriend
You could try to use a page script and page variables for this. Look at
the attached example that puts a custom page n of m in the header. The
script looks for instances of the first table header in the output
before incrementing current page and page total.

Jason

On 10/24/2011 12:34 PM, kkp wrote:
> HI,
>
>
>
> We created a report with two tables in such a way , that the date from
> first table is displayed in HTML and from the second is displayed in
> Excel, to have this differentiation we introduced a bookmark between
> these two tables.
>
> IN rptdocumnet we display total page count and that counts the number of
> pages for both the tables, is there any way we can count only the pages
> from first table till bookmark and exclude second table as it goes to
> excel .
>
> Can we get sample code for this to be included in our rptdesign files.
>
> Thanks,
> KKP
Re: PageCount with bookmark [message #748398 is a reply to message #748331] Mon, 24 October 2011 13:02 Go to previous messageGo to next message
Eclipse UserFriend
You could try to use a page script and page variables for this. Look at
the attached example that puts a custom page n of m in the header. The
script looks for instances of the first table header in the output
before incrementing current page and page total.

Jason

On 10/24/2011 12:34 PM, kkp wrote:
> HI,
>
>
>
> We created a report with two tables in such a way , that the date from
> first table is displayed in HTML and from the second is displayed in
> Excel, to have this differentiation we introduced a bookmark between
> these two tables.
>
> IN rptdocumnet we display total page count and that counts the number of
> pages for both the tables, is there any way we can count only the pages
> from first table till bookmark and exclude second table as it goes to
> excel .
>
> Can we get sample code for this to be included in our rptdesign files.
>
> Thanks,
> KKP
Re: PageCount with bookmark [message #748403 is a reply to message #748331] Mon, 24 October 2011 13:02 Go to previous messageGo to next message
Eclipse UserFriend
You could try to use a page script and page variables for this. Look at
the attached example that puts a custom page n of m in the header. The
script looks for instances of the first table header in the output
before incrementing current page and page total.

Jason

On 10/24/2011 12:34 PM, kkp wrote:
> HI,
>
>
>
> We created a report with two tables in such a way , that the date from
> first table is displayed in HTML and from the second is displayed in
> Excel, to have this differentiation we introduced a bookmark between
> these two tables.
>
> IN rptdocumnet we display total page count and that counts the number of
> pages for both the tables, is there any way we can count only the pages
> from first table till bookmark and exclude second table as it goes to
> excel .
>
> Can we get sample code for this to be included in our rptdesign files.
>
> Thanks,
> KKP
Re: PageCount with bookmark [message #748407 is a reply to message #748331] Mon, 24 October 2011 13:02 Go to previous messageGo to next message
Eclipse UserFriend
You could try to use a page script and page variables for this. Look at
the attached example that puts a custom page n of m in the header. The
script looks for instances of the first table header in the output
before incrementing current page and page total.

Jason

On 10/24/2011 12:34 PM, kkp wrote:
> HI,
>
>
>
> We created a report with two tables in such a way , that the date from
> first table is displayed in HTML and from the second is displayed in
> Excel, to have this differentiation we introduced a bookmark between
> these two tables.
>
> IN rptdocumnet we display total page count and that counts the number of
> pages for both the tables, is there any way we can count only the pages
> from first table till bookmark and exclude second table as it goes to
> excel .
>
> Can we get sample code for this to be included in our rptdesign files.
>
> Thanks,
> KKP
Re: PageCount with bookmark [message #748411 is a reply to message #748331] Mon, 24 October 2011 13:02 Go to previous messageGo to next message
Eclipse UserFriend
You could try to use a page script and page variables for this. Look at
the attached example that puts a custom page n of m in the header. The
script looks for instances of the first table header in the output
before incrementing current page and page total.

Jason

On 10/24/2011 12:34 PM, kkp wrote:
> HI,
>
>
>
> We created a report with two tables in such a way , that the date from
> first table is displayed in HTML and from the second is displayed in
> Excel, to have this differentiation we introduced a bookmark between
> these two tables.
>
> IN rptdocumnet we display total page count and that counts the number of
> pages for both the tables, is there any way we can count only the pages
> from first table till bookmark and exclude second table as it goes to
> excel .
>
> Can we get sample code for this to be included in our rptdesign files.
>
> Thanks,
> KKP
Re: PageCount with bookmark [message #748414 is a reply to message #748331] Mon, 24 October 2011 13:02 Go to previous messageGo to next message
Eclipse UserFriend
You could try to use a page script and page variables for this. Look at
the attached example that puts a custom page n of m in the header. The
script looks for instances of the first table header in the output
before incrementing current page and page total.

Jason

On 10/24/2011 12:34 PM, kkp wrote:
> HI,
>
>
>
> We created a report with two tables in such a way , that the date from
> first table is displayed in HTML and from the second is displayed in
> Excel, to have this differentiation we introduced a bookmark between
> these two tables.
>
> IN rptdocumnet we display total page count and that counts the number of
> pages for both the tables, is there any way we can count only the pages
> from first table till bookmark and exclude second table as it goes to
> excel .
>
> Can we get sample code for this to be included in our rptdesign files.
>
> Thanks,
> KKP
Re: PageCount with bookmark [message #748419 is a reply to message #748331] Mon, 24 October 2011 13:02 Go to previous messageGo to next message
Eclipse UserFriend
You could try to use a page script and page variables for this. Look at
the attached example that puts a custom page n of m in the header. The
script looks for instances of the first table header in the output
before incrementing current page and page total.

Jason

On 10/24/2011 12:34 PM, kkp wrote:
> HI,
>
>
>
> We created a report with two tables in such a way , that the date from
> first table is displayed in HTML and from the second is displayed in
> Excel, to have this differentiation we introduced a bookmark between
> these two tables.
>
> IN rptdocumnet we display total page count and that counts the number of
> pages for both the tables, is there any way we can count only the pages
> from first table till bookmark and exclude second table as it goes to
> excel .
>
> Can we get sample code for this to be included in our rptdesign files.
>
> Thanks,
> KKP
Re: PageCount with bookmark [message #748422 is a reply to message #748331] Mon, 24 October 2011 13:02 Go to previous messageGo to next message
Eclipse UserFriend
You could try to use a page script and page variables for this. Look at
the attached example that puts a custom page n of m in the header. The
script looks for instances of the first table header in the output
before incrementing current page and page total.

Jason

On 10/24/2011 12:34 PM, kkp wrote:
> HI,
>
>
>
> We created a report with two tables in such a way , that the date from
> first table is displayed in HTML and from the second is displayed in
> Excel, to have this differentiation we introduced a bookmark between
> these two tables.
>
> IN rptdocumnet we display total page count and that counts the number of
> pages for both the tables, is there any way we can count only the pages
> from first table till bookmark and exclude second table as it goes to
> excel .
>
> Can we get sample code for this to be included in our rptdesign files.
>
> Thanks,
> KKP
Re: PageCount with bookmark [message #748426 is a reply to message #748331] Mon, 24 October 2011 13:02 Go to previous messageGo to next message
Eclipse UserFriend
You could try to use a page script and page variables for this. Look at
the attached example that puts a custom page n of m in the header. The
script looks for instances of the first table header in the output
before incrementing current page and page total.

Jason

On 10/24/2011 12:34 PM, kkp wrote:
> HI,
>
>
>
> We created a report with two tables in such a way , that the date from
> first table is displayed in HTML and from the second is displayed in
> Excel, to have this differentiation we introduced a bookmark between
> these two tables.
>
> IN rptdocumnet we display total page count and that counts the number of
> pages for both the tables, is there any way we can count only the pages
> from first table till bookmark and exclude second table as it goes to
> excel .
>
> Can we get sample code for this to be included in our rptdesign files.
>
> Thanks,
> KKP
Re: PageCount with bookmark [message #749610 is a reply to message #748426] Tue, 25 October 2011 06:22 Go to previous messageGo to next message
Eclipse UserFriend
Hi Jason

This works fine but We want to include this as a library.
In library we cannot include Report variables and Page variables.

Please suggest some alternate way of acheiving this without variables(Report or Page variables, as they cannot be included in the library).

We tried to set a global variable and retrieve its value in the master page in on render method. But it doesn't work.
Please find attached the rptdesign.
Re: PageCount with bookmark [message #749976 is a reply to message #749610] Tue, 25 October 2011 10:54 Go to previous message
Eclipse UserFriend
On your master page use a label instead of a data item and put this in
the onRender:

this.text = reportContext.getPersistentGlobalVariable("pagtot");

Jason

On 10/25/2011 6:22 AM, kkp wrote:
> Hi Jason
>
> This works fine but We want to include this as a library.
> In library we cannot include Report variables and Page variables.
>
> Please suggest some alternate way of acheiving this without variables(Report or Page variables, as they cannot be included in the library).
>
> We tried to set a global variable and retrieve its value in the master page in on render method. But it doesn't work.
> Please find attached the rptdesign.
Previous Topic:Simplified Analytic Dashboard Setup in Yellowfin 5.2
Next Topic:View hyperlinks in weblogic server
Goto Forum:
  


Current Time: Thu Jul 24 22:30:21 EDT 2025

Powered by FUDForum. Page generated in 0.33415 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.2.
Copyright ©2001-2010 FUDforum Bulletin Board Software

Back to the top

Sign up to our Newsletter

A fresh new issue delivered monthly