Home » Language IDEs » C / C++ IDE (CDT) » setting breakpoint while program runs
| setting breakpoint while program runs [message #72039] |
Wed, 28 May 2003 14:15  |
Eclipse User |
|
|
|
Originally posted by: andrayk.futurewayNOSPAM.com
Hello,
my program was running under debugger's control when I attempted to set
breakpoint in the code line that I was interested in. I tried to set
breakpoint in regular fashion, i.e. by double clicking on the left margin
in the Editor. The following has happened: program immediately got
suspended at random point in it's text segment (i.e. not on the line that
I attempted to set breakpoint on); the fat dot appear on the left margin
of
the code line that I double clicked on. That fat dot resembled regular
breakpoint sign, but it was actually different - it didn't have the short
stick (as regular breakpoint has). I went to "Breakpoint" tab in "Debug"
view, and found new breakpoint listed there. I checked it's properties;
they appear to be pretty much like those of regular breakpoints (i.e. it
was
enabled, had ignore count of zero, and no conditions attached). But when
I resumed execution, program didn't break on this breakpoint - it was
totally ignored. I tried enabling/diabling this "breakpoint", but it
made no difference - it was always ignored. My question is, what does
that fat blue dot means ?
Thanks in advance,
Andray
|
|
|
| Re: setting breakpoint while program runs [message #72076 is a reply to message #72039] |
Wed, 28 May 2003 14:30  |
| Eclipse User |
|
|
|
Originally posted by: mikhailk.qnx.com
Fat blue dot is a regular image for a breakpoint. If breakpoint is set at
some debug session CDT adds the check sign (you called it "short stick") to
this image.
Which version of CDT are you using? The problem you are describing is a bug
and it is supposed to be fixed in 1.1.
"Andray Kaganovsky" <andrayk@futurewayNOSPAM.com> wrote in message
news:bb2ubf$gpt$1@rogue.oti.com...
> Hello,
>
> my program was running under debugger's control when I attempted to set
> breakpoint in the code line that I was interested in. I tried to set
> breakpoint in regular fashion, i.e. by double clicking on the left margin
> in the Editor. The following has happened: program immediately got
> suspended at random point in it's text segment (i.e. not on the line that
> I attempted to set breakpoint on); the fat dot appear on the left margin
> of
> the code line that I double clicked on. That fat dot resembled regular
> breakpoint sign, but it was actually different - it didn't have the short
> stick (as regular breakpoint has). I went to "Breakpoint" tab in "Debug"
> view, and found new breakpoint listed there. I checked it's properties;
> they appear to be pretty much like those of regular breakpoints (i.e. it
> was
> enabled, had ignore count of zero, and no conditions attached). But when
> I resumed execution, program didn't break on this breakpoint - it was
> totally ignored. I tried enabling/diabling this "breakpoint", but it
> made no difference - it was always ignored. My question is, what does
> that fat blue dot means ?
>
> Thanks in advance,
> Andray
>
|
|
|
| Re: setting breakpoint while program runs [message #72197 is a reply to message #72076] |
Wed, 28 May 2003 16:55 |
| Eclipse User |
|
|
|
Originally posted by: andrayk.futurewayNOSPAM.com
Thanks for the quick answer, Mikhail. I use CDT 1.0.1. I actually came
across
this problem when I was using latest QNX Momentcis 6.2.1 PE, and decided
to check it on my RH 9.0 box, where I encountered this bug as well. I hope
it is indeed fixed in CDT 1.1.
Should I post problem report about this bug at QDN as well ?
regards, Andray
Mikhail Khodjaiants wrote:
> Fat blue dot is a regular image for a breakpoint. If breakpoint is set at
> some debug session CDT adds the check sign (you called it "short stick") to
> this image.
> Which version of CDT are you using? The problem you are describing is a bug
> and it is supposed to be fixed in 1.1.
> "Andray Kaganovsky" <andrayk@futurewayNOSPAM.com> wrote in message
> news:bb2ubf$gpt$1@rogue.oti.com...
> > Hello,
> >
> > my program was running under debugger's control when I attempted to set
> > breakpoint in the code line that I was interested in. I tried to set
> > breakpoint in regular fashion, i.e. by double clicking on the left margin
> > in the Editor. The following has happened: program immediately got
> > suspended at random point in it's text segment (i.e. not on the line that
> > I attempted to set breakpoint on); the fat dot appear on the left margin
> > of
> > the code line that I double clicked on. That fat dot resembled regular
> > breakpoint sign, but it was actually different - it didn't have the short
> > stick (as regular breakpoint has). I went to "Breakpoint" tab in "Debug"
> > view, and found new breakpoint listed there. I checked it's properties;
> > they appear to be pretty much like those of regular breakpoints (i.e. it
> > was
> > enabled, had ignore count of zero, and no conditions attached). But when
> > I resumed execution, program didn't break on this breakpoint - it was
> > totally ignored. I tried enabling/diabling this "breakpoint", but it
> > made no difference - it was always ignored. My question is, what does
> > that fat blue dot means ?
> >
> > Thanks in advance,
> > Andray
> >
|
|
|
| Re: setting breakpoint while program runs [message #72214 is a reply to message #72197] |
Wed, 28 May 2003 17:56 |
| Eclipse User |
|
|
|
Originally posted by: mikhailk.qnx.com
I don't think it is necessary. The CDT part of QNX Momentcis 6.3 is based on
1.1.
Thanks for trying CDT.
Regards,
Mikhail
"Andray Kaganovsky" <andrayk@futurewayNOSPAM.com> wrote in message
news:bb37ns$pqg$1@rogue.oti.com...
> Thanks for the quick answer, Mikhail. I use CDT 1.0.1. I actually came
> across
> this problem when I was using latest QNX Momentcis 6.2.1 PE, and decided
> to check it on my RH 9.0 box, where I encountered this bug as well. I hope
> it is indeed fixed in CDT 1.1.
>
> Should I post problem report about this bug at QDN as well ?
>
> regards, Andray
>
> Mikhail Khodjaiants wrote:
>
> > Fat blue dot is a regular image for a breakpoint. If breakpoint is set
at
> > some debug session CDT adds the check sign (you called it "short stick")
to
> > this image.
> > Which version of CDT are you using? The problem you are describing is a
bug
> > and it is supposed to be fixed in 1.1.
>
> > "Andray Kaganovsky" <andrayk@futurewayNOSPAM.com> wrote in message
> > news:bb2ubf$gpt$1@rogue.oti.com...
> > > Hello,
> > >
> > > my program was running under debugger's control when I attempted to
set
> > > breakpoint in the code line that I was interested in. I tried to set
> > > breakpoint in regular fashion, i.e. by double clicking on the left
margin
> > > in the Editor. The following has happened: program immediately got
> > > suspended at random point in it's text segment (i.e. not on the line
that
> > > I attempted to set breakpoint on); the fat dot appear on the left
margin
> > > of
> > > the code line that I double clicked on. That fat dot resembled regular
> > > breakpoint sign, but it was actually different - it didn't have the
short
> > > stick (as regular breakpoint has). I went to "Breakpoint" tab in
"Debug"
> > > view, and found new breakpoint listed there. I checked it's
properties;
> > > they appear to be pretty much like those of regular breakpoints (i.e.
it
> > > was
> > > enabled, had ignore count of zero, and no conditions attached). But
when
> > > I resumed execution, program didn't break on this breakpoint - it was
> > > totally ignored. I tried enabling/diabling this "breakpoint", but it
> > > made no difference - it was always ignored. My question is, what does
> > > that fat blue dot means ?
> > >
> > > Thanks in advance,
> > > Andray
> > >
>
>
>
>
>
|
|
|
| Re: setting breakpoint while program runs [message #72251 is a reply to message #72076] |
Wed, 28 May 2003 19:13 |
| Eclipse User |
|
|
|
Originally posted by: andrayk.futurewayNOSPAM.com
This bug is indeed fixed in CDT 1.1.
Andray
Mikhail Khodjaiants wrote:
> Fat blue dot is a regular image for a breakpoint. If breakpoint is set at
> some debug session CDT adds the check sign (you called it \"short stick\") to
> this image.
> Which version of CDT are you using? The problem you are describing is a bug
> and it is supposed to be fixed in 1.1.
> \"Andray Kaganovsky\" <andrayk@futurewayNOSPAM.com> wrote in message
> news:bb2ubf$gpt$1@rogue.oti.com...
> > Hello,
> >
> > my program was running under debugger\'s control when I attempted to set
> > breakpoint in the code line that I was interested in. I tried to set
> > breakpoint in regular fashion, i.e. by double clicking on the left margin
> > in the Editor. The following has happened: program immediately got
> > suspended at random point in it\'s text segment (i.e. not on the line that
> > I attempted to set breakpoint on); the fat dot appear on the left margin
> > of
> > the code line that I double clicked on. That fat dot resembled regular
> > breakpoint sign, but it was actually different - it didn\'t have the short
> > stick (as regular breakpoint has). I went to \"Breakpoint\" tab in
\"Debug\"
> > view, and found new breakpoint listed there. I checked it\'s properties;
> > they appear to be pretty much like those of regular breakpoints (i.e. it
> > was
> > enabled, had ignore count of zero, and no conditions attached). But when
> > I resumed execution, program didn\'t break on this breakpoint - it was
> > totally ignored. I tried enabling/diabling this \"breakpoint\", but it
> > made no difference - it was always ignored. My question is, what does
> > that fat blue dot means ?
> >
> > Thanks in advance,
> > Andray
> >
|
|
|
Goto Forum:
Current Time: Sun Jul 27 12:53:02 EDT 2025
Powered by FUDForum. Page generated in 0.05922 seconds |
Home