Eclipse Community Forums: C / C++ IDE (CDT)

Home » Language IDEs » C / C++ IDE (CDT) » C-Build make

Thu, 24 October 2002 08:06

Eclipse User

Originally posted by: dieschemm.t-online.de

Hello,

I am running Eclipse 2.0.1 with CDT F3 on QNX Neutrino.

I make a Hello World Program and try to build an exutable.
Now I get an error message in the C-Build Window

If I save the *.c file I get this error message
make
make: *** No targets specified and no makefile found. Stop.

If I do Project/Rebuild Project I get this Error message
make clean all
make: *** No rule to make target 'clean'. Stop.

If I do Project/Rebuild All I get this message
make -k clean all
make: *** No rule to make target 'clean'.
make: *** No rule to make target 'all'.

Inside a shell, the command 'make clean all' or only 'make' works well.

Thanks for your help

Re: C-Build make [message #47064 is a reply to message #47034]

Thu, 24 October 2002 08:11

Eclipse User

May be you forgot to write makefile or put it down in incorrect place....

Hope it helps,
Igor S. Zamyatin
Interstron Ltd.
----------------------------------------
email: isz@interstron.ru
tel: +7 (095) 269-4713
cell: +7 (902) 659-5838
www: http://www.interstron.ru

Dieter Schemmelmann wrote:

> Hello,

> I am running Eclipse 2.0.1 with CDT F3 on QNX Neutrino.

> I make a Hello World Program and try to build an exutable.
> Now I get an error message in the C-Build Window

> If I save the *.c file I get this error message
> make
> make: *** No targets specified and no makefile found. Stop.

> If I do Project/Rebuild Project I get this Error message
> make clean all
> make: *** No rule to make target 'clean'. Stop.

> If I do Project/Rebuild All I get this message
> make -k clean all
> make: *** No rule to make target 'clean'.
> make: *** No rule to make target 'all'.

> Inside a shell, the command 'make clean all' or only 'make' works well.

> Thanks for your help

Re: C-Build make [message #47094 is a reply to message #47064]

Thu, 24 October 2002 08:46

Eclipse User

Originally posted by: dieschemm.t-online.de

the makefile and the Hello.c is in the project directory.

"Igor S. Zamyatin" schrieb:
>
> May be you forgot to write makefile or put it down in incorrect place....

Re: C-Build make [message #47123 is a reply to message #47094]

Thu, 24 October 2002 10:26

Eclipse User

Originally posted by: johan.nosp.m.appeal.se

Shouldn't it be named "Makefile" and not "makefile"?

Cheers //Johan

Dieter Schemmelmann wrote:
> the makefile and the Hello.c is in the project directory.
>
>
> "Igor S. Zamyatin" schrieb:
>
>> May be you forgot to write makefile or put it down in incorrect place....
>

Re: C-Build make [message #47185 is a reply to message #47123]

Thu, 24 October 2002 10:44

Eclipse User

Originally posted by: dieschemm.t-online.de

Thanks but it make no difference between Makefile and makefile

make is searching for booth.

Inside a shell make works well.

Johan Walles schrieb:
>
> Shouldn't it be named "Makefile" and not "makefile"?
>
> Cheers //Johan
>

Re: C-Build make [message #47202 is a reply to message #47185]

Thu, 24 October 2002 10:25

Eclipse User

Try to use Eclipse Debugger to find out what happens if you want.

You may start investigation from org.eclipse.cdt.core.CBuilder class and
function "build"

Igor S. Zamyatin

> Thanks but it make no difference between Makefile and makefile

> make is searching for booth.

> Inside a shell make works well.

> Johan Walles schrieb:
> >
> > Shouldn't it be named "Makefile" and not "makefile"?
> >
> > Cheers //Johan
> >

Re: C-Build make [message #47226 is a reply to message #47202]

Thu, 24 October 2002 10:57

Eclipse User

Originally posted by: dieschemm.t-online.de

How can I start the eclipse debugger I have the complete sdk
environment but never start the debugger.

"Igor S. Zamyatin" schrieb:
>
> Try to use Eclipse Debugger to find out what happens if you want.
>
> You may start investigation from org.eclipse.cdt.core.CBuilder class and
> function "build"
>
> Igor S. Zamyatin
>

Re: C-Build make [message #47256 is a reply to message #47202]

Thu, 24 October 2002 11:00

Eclipse User

Originally posted by: dieschemm.t-online.de

Or where is the best starting point in documentation to compile and
debug eclipse itself ?

"Igor S. Zamyatin" schrieb:
>
> Try to use Eclipse Debugger to find out what happens if you want.
>
> You may start investigation from org.eclipse.cdt.core.CBuilder class and
> function "build"
>
> Igor S. Zamyatin
>

Re: C-Build make [message #47416 is a reply to message #47226]

Fri, 25 October 2002 01:57

Eclipse User

You need to start Eclipse(parent) and choose "Debug as Runtime
WorkBench" and then New workbench(child) will appear. You need to open CDT
Perspective in child, create there C++ Project, and then build them. In
the same time in the parent you can set breakpoints, step, stop, run
process in child workbench and so on.

Igor S. Zamyatin

> How can I start the eclipse debugger I have the complete sdk
> environment but never start the debugger.

> "Igor S. Zamyatin" schrieb:
> >
> > Try to use Eclipse Debugger to find out what happens if you want.
> >
> > You may start investigation from org.eclipse.cdt.core.CBuilder class and
> > function "build"
> >
> > Igor S. Zamyatin
> >

Re: C-Build make [message #47477 is a reply to message #47416]

Fri, 25 October 2002 06:11

Eclipse User

Originally posted by: dieschemm.t-online.de

First I get no choice for JRE (Runtime environment)
Forgot to launch j9 (special qnx problem)

Eclipse seem to run in debug mode (it run two times parent und work)

But now I have no choice to set breakpoints. In windows I have only the
possibility to set breakpoints on exception functions in qnx I have no
choice for breakpoints.

On this weekend I will setup a unix PC to compare actions on qnx and on
unix.

Thanks for your help

Dieter Schemmelmann

"Igor S. Zamyatin" schrieb:
>
> You need to start Eclipse(parent) and choose "Debug as Runtime
> WorkBench" and then New workbench(child) will appear. You need to open CDT
> Perspective in child, create there C++ Project, and then build them. In
> the same time in the parent you can set breakpoints, step, stop, run
> process in child workbench and so on.
>
> Igor S. Zamyatin
>

Re: C-Build make [message #47841 is a reply to message #47034]

Tue, 29 October 2002 02:43

Eclipse User

Originally posted by: jhering.avecs-bergen.de

Hallo Dieter,

please try to use in Build Settings -> Build Command
make -C <your directory where the Makefile is located"

and here an sample Makefile which work as discribed

CC = cc
CFLAGS = -g2 -I./

LD_FLAGS = -lform -lmenu -lpanel -lncurses -lsocket

..c.o:
$(CC) -c $(CCFLAGS) $<
all: modbus

modbus:modbus.c
$(CC) $(CFLAGS) $@.c $(LD_FLAGS) -o $@

clean:
rm -f modbus

Dieter Schemmelmann wrote:

>Hello,
>
>I am running Eclipse 2.0.1 with CDT F3 on QNX Neutrino.
>
>I make a Hello World Program and try to build an exutable.
>Now I get an error message in the C-Build Window
>
>If I save the *.c file I get this error message
>make
>make: *** No targets specified and no makefile found. Stop.
>
>If I do Project/Rebuild Project I get this Error message
>make clean all
>make: *** No rule to make target 'clean'. Stop.
>
>If I do Project/Rebuild All I get this message
>make -k clean all
>make: *** No rule to make target 'clean'.
>make: *** No rule to make target 'all'.
>
>
>Inside a shell, the command 'make clean all' or only 'make' works well.
>
>Thanks for your help
>
>

--
____________________________________________________________ _
Joerg Hering
Chief Developer VDR
e-mail: jhering@avecs-bergen.de
privat: hering.ruegen@t-online.de
mobile: jhering.ruegen@gmx.de
------------------------------------------------------------ -
AVECS Bergen GmbH
development department
Billrothstraße 11a
D-18528 Bergen auf Rügen
------------------------------------------------------------ -
Tel.: +49 3838 2119101
Fax: +49 3838 2119105
Mobile: +49 172 3896974
URL: http://www.avecs-bergen.de
____________________________________________________________ _

Previous Topic:	NEWB Question - Error Highlighting -Why
Next Topic:	CDT process spawner

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Oct 19 01:27:42 EDT 2025

.:: Contact :: Home ::.

Breadcrumbs

Sign up to our Newsletter