Home » Archived » OHF » problem with H3ET tool
| | |
| Re: problem with H3ET tool [message #28309 is a reply to message #28271] |
Wed, 14 February 2007 03:41   |
Eclipse User |
|
|
|
Originally posted by: giuseppe.italiano.agic.it
Here's my mif
But I have same problem with all mifs, so I don't think the problem is in
it.
I've attached also my project file list (probably very confused), maybe
something is wrong there
Best regards
Giuseppe
"Dennis Nguyen" <dennisn@jivamedical.com> ha scritto nel messaggio
news:equ12f$qq6$1@utils.eclipse.org...
> Hi,
>
> The missing root is because it can't find your mif file entry point(s).
> If not, something else is amiss. If you can attached the mif file, maybe
> we can help.
>
> No ideas about the path problem though.
>
> Regards.
> Dennis
>
> Giuseppe wrote:
>> Hi,
>> solved the problem, just a stupid case sensitive one (mif folder instead
>> than Mif).
>> But now I have root combo empty at last step as in attachment. Why? What
>> is
>> missing?
>>
>> p.s: I have some problem with paths, because I had to set in
>> datatypes-its-xml-source.xml absolute paths for
>> MANIFEST.ent and vt.dtd
>> Any idea?
>> "Giuseppe" <giuseppe.italiano@agic.it> ha scritto nel messaggio
>> news:eqsabd$91b$1@utils.eclipse.org...
>>> Hi guys,
>>> when I try to create a new Message Instance I receive the error in
>>> attachment. Any idea????
>>> Thanks in advance.
>>> Bye
>>>
>>>
>>>
>>
>>
|
|
|
| Re: problem with H3ET tool [message #28348 is a reply to message #28309] |
Thu, 15 February 2007 01:18 |
| Eclipse User |
|
|
|
Originally posted by: dennisn.jivamedical.com
Hi Giuseppe,
I am afraid that you're missing a critical file: cmetList.mif. However,
even with that file, you still may had problem generating the message as
the tools can't find one of: COCT_MT050000UV01, COCT_MT050000UV or
COCT_MT050000.
At the moment, the setup required for successfully generated a message
is complex, and I've been told that we would release a reference project
with everything setup so you can generate message. For further info,
please check this wikki by Brandon:
http://wiki.eclipse.org/index.php/H3ET_Project_Configuration
Regards,
Dennis
Giuseppe wrote:
> Here's my mif
> But I have same problem with all mifs, so I don't think the problem is in
> it.
> I've attached also my project file list (probably very confused), maybe
> something is wrong there
> Best regards
>
> Giuseppe
>
> "Dennis Nguyen" <dennisn@jivamedical.com> ha scritto nel messaggio
> news:equ12f$qq6$1@utils.eclipse.org...
>> Hi,
>>
>> The missing root is because it can't find your mif file entry point(s).
>> If not, something else is amiss. If you can attached the mif file, maybe
>> we can help.
>>
>> No ideas about the path problem though.
>>
>> Regards.
>> Dennis
>>
>> Giuseppe wrote:
>>> Hi,
>>> solved the problem, just a stupid case sensitive one (mif folder instead
>>> than Mif).
>>> But now I have root combo empty at last step as in attachment. Why? What
>>> is
>>> missing?
>>>
>>> p.s: I have some problem with paths, because I had to set in
>>> datatypes-its-xml-source.xml absolute paths for
>>> MANIFEST.ent and vt.dtd
>>> Any idea?
>>> "Giuseppe" <giuseppe.italiano@agic.it> ha scritto nel messaggio
>>> news:eqsabd$91b$1@utils.eclipse.org...
>>>> Hi guys,
>>>> when I try to create a new Message Instance I receive the error in
>>>> attachment. Any idea????
>>>> Thanks in advance.
>>>> Bye
>>>>
>>>>
>>>>
>>>
>
>
|
|
|
| OHF and Connectathon [message #28386 is a reply to message #28348] |
Fri, 16 February 2007 01:03 |
| Eclipse User |
|
|
|
Originally posted by: mvt91.free.fr
Hello,
I'll be in Berlin next April as connectathon monitor.
I'd like to know if I can use :
OHF stand alone to improve my IHE Knowledge (with which data's ?)
OHF as "monitor support tool" to validate the tests I'll have to
"supervise"
Thanks
Michel
|
|
| |
| Re: problem with H3ET tool [message #577989 is a reply to message #28234] |
Tue, 13 February 2007 22:52 |
| Eclipse User |
|
|
|
Hi,
The missing root is because it can't find your mif file entry point(s).
If not, something else is amiss. If you can attached the mif file, maybe
we can help.
No ideas about the path problem though.
Regards.
Dennis
Giuseppe wrote:
> Hi,
> solved the problem, just a stupid case sensitive one (mif folder instead
> than Mif).
> But now I have root combo empty at last step as in attachment. Why? What is
> missing?
>
> p.s: I have some problem with paths, because I had to set in
> datatypes-its-xml-source.xml absolute paths for
> MANIFEST.ent and vt.dtd
> Any idea?
> "Giuseppe" <giuseppe.italiano@agic.it> ha scritto nel messaggio
> news:eqsabd$91b$1@utils.eclipse.org...
>> Hi guys,
>> when I try to create a new Message Instance I receive the error in
>> attachment. Any idea????
>> Thanks in advance.
>> Bye
>>
>>
>>
>
>
|
|
|
| Re: problem with H3ET tool [message #578024 is a reply to message #28271] |
Wed, 14 February 2007 03:41 |
| Eclipse User |
|
|
|
Here's my mif
But I have same problem with all mifs, so I don't think the problem is in
it.
I've attached also my project file list (probably very confused), maybe
something is wrong there
Best regards
Giuseppe
"Dennis Nguyen" <dennisn@jivamedical.com> ha scritto nel messaggio
news:equ12f$qq6$1@utils.eclipse.org...
> Hi,
>
> The missing root is because it can't find your mif file entry point(s).
> If not, something else is amiss. If you can attached the mif file, maybe
> we can help.
>
> No ideas about the path problem though.
>
> Regards.
> Dennis
>
> Giuseppe wrote:
>> Hi,
>> solved the problem, just a stupid case sensitive one (mif folder instead
>> than Mif).
>> But now I have root combo empty at last step as in attachment. Why? What
>> is
>> missing?
>>
>> p.s: I have some problem with paths, because I had to set in
>> datatypes-its-xml-source.xml absolute paths for
>> MANIFEST.ent and vt.dtd
>> Any idea?
>> "Giuseppe" <giuseppe.italiano@agic.it> ha scritto nel messaggio
>> news:eqsabd$91b$1@utils.eclipse.org...
>>> Hi guys,
>>> when I try to create a new Message Instance I receive the error in
>>> attachment. Any idea????
>>> Thanks in advance.
>>> Bye
>>>
>>>
>>>
>>
>>
|
|
|
| Re: problem with H3ET tool [message #578055 is a reply to message #28309] |
Thu, 15 February 2007 01:18 |
| Eclipse User |
|
|
|
Hi Giuseppe,
I am afraid that you're missing a critical file: cmetList.mif. However,
even with that file, you still may had problem generating the message as
the tools can't find one of: COCT_MT050000UV01, COCT_MT050000UV or
COCT_MT050000.
At the moment, the setup required for successfully generated a message
is complex, and I've been told that we would release a reference project
with everything setup so you can generate message. For further info,
please check this wikki by Brandon:
http://wiki.eclipse.org/index.php/H3ET_Project_Configuration
Regards,
Dennis
Giuseppe wrote:
> Here's my mif
> But I have same problem with all mifs, so I don't think the problem is in
> it.
> I've attached also my project file list (probably very confused), maybe
> something is wrong there
> Best regards
>
> Giuseppe
>
> "Dennis Nguyen" <dennisn@jivamedical.com> ha scritto nel messaggio
> news:equ12f$qq6$1@utils.eclipse.org...
>> Hi,
>>
>> The missing root is because it can't find your mif file entry point(s).
>> If not, something else is amiss. If you can attached the mif file, maybe
>> we can help.
>>
>> No ideas about the path problem though.
>>
>> Regards.
>> Dennis
>>
>> Giuseppe wrote:
>>> Hi,
>>> solved the problem, just a stupid case sensitive one (mif folder instead
>>> than Mif).
>>> But now I have root combo empty at last step as in attachment. Why? What
>>> is
>>> missing?
>>>
>>> p.s: I have some problem with paths, because I had to set in
>>> datatypes-its-xml-source.xml absolute paths for
>>> MANIFEST.ent and vt.dtd
>>> Any idea?
>>> "Giuseppe" <giuseppe.italiano@agic.it> ha scritto nel messaggio
>>> news:eqsabd$91b$1@utils.eclipse.org...
>>>> Hi guys,
>>>> when I try to create a new Message Instance I receive the error in
>>>> attachment. Any idea????
>>>> Thanks in advance.
>>>> Bye
>>>>
>>>>
>>>>
>>>
>
>
|
|
|
| OHF and Connectathon [message #578086 is a reply to message #28348] |
Fri, 16 February 2007 01:03 |
| Eclipse User |
|
|
|
Originally posted by: mvt91.free.fr
Hello,
I'll be in Berlin next April as connectathon monitor.
I'd like to know if I can use :
OHF stand alone to improve my IHE Knowledge (with which data's ?)
OHF as "monitor support tool" to validate the tests I'll have to
"supervise"
Thanks
Michel
|
|
|
Goto Forum:
Current Time: Fri May 02 00:04:08 EDT 2025
Powered by FUDForum. Page generated in 0.03352 seconds |
Home
