Eclipse Community Forums: GEF » Copy GEF diagram as WMF?

Home » Eclipse Projects » GEF » Copy GEF diagram as WMF?

Copy GEF diagram as WMF? [message #194961]

Tue, 06 September 2005 15:42

Eclipse User

Does the GEF have support to copy a diagram as a WMF (Windows Meta File) via
the clipboard to another application? Or maybe this is part of SWT?

Re: Copy GEF diagram as WMF? [message #195205 is a reply to message #194961]

Thu, 08 September 2005 13:06

Eclipse User

Originally posted by: none.unknown.com

Sorry, no.

"Felix L J Mayer" <felix.mayer@objectaid.com> wrote in message
news:dfkr6e$qs$1@news.eclipse.org...
> Does the GEF have support to copy a diagram as a WMF (Windows Meta File)
via
> the clipboard to another application? Or maybe this is part of SWT?
>
>

Re: Copy GEF diagram as WMF? [message #195388 is a reply to message #195205]

Fri, 09 September 2005 13:40

Eclipse User

Is that no to both questions or just the first one?

"Pratik Shah" <none@unknown.com> wrote in message
news:dfpr3h$juj$1@news.eclipse.org...
> Sorry, no.
>
> "Felix L J Mayer" <felix.mayer@objectaid.com> wrote in message
> news:dfkr6e$qs$1@news.eclipse.org...
>> Does the GEF have support to copy a diagram as a WMF (Windows Meta File)
> via
>> the clipboard to another application? Or maybe this is part of SWT?
>>
>>
>
>

Re: Copy GEF diagram as WMF? [message #195433 is a reply to message #195388]

Fri, 09 September 2005 14:21

Eclipse User

Originally posted by: none.unknown.com

I think SWT is irrelevant since you're trying to capture Draw2d figures.
You can ask on the SWT newsgroup to be sure, but AFAIK there's no such
support in SWT either.

You can, however, capture the GEF diagram as an Image. So you might want to
see if you can find a converter that can convert the image into the WMF
format.

"Felix L J Mayer" <felix.mayer@objectaid.com> wrote in message
news:dfsh6f$gl$1@news.eclipse.org...
> Is that no to both questions or just the first one?
>
> "Pratik Shah" <none@unknown.com> wrote in message
> news:dfpr3h$juj$1@news.eclipse.org...
> > Sorry, no.
> >
> > "Felix L J Mayer" <felix.mayer@objectaid.com> wrote in message
> > news:dfkr6e$qs$1@news.eclipse.org...
> >> Does the GEF have support to copy a diagram as a WMF (Windows Meta
File)
> > via
> >> the clipboard to another application? Or maybe this is part of SWT?
> >>
> >>
> >
> >
>
>

Re: Copy GEF diagram as WMF? [message #195448 is a reply to message #195433]

Fri, 09 September 2005 15:06

Eclipse User

An image would be better than nothing, could you point me to the right
place?

The nice thing about WMF is that it is a vector-based format, so conversion
of an image to WMF should not be possible.

"Pratik Shah" <none@unknown.com> wrote in message
news:dfsjqj$3u1$1@news.eclipse.org...
>I think SWT is irrelevant since you're trying to capture Draw2d figures.
> You can ask on the SWT newsgroup to be sure, but AFAIK there's no such
> support in SWT either.
>
> You can, however, capture the GEF diagram as an Image. So you might want
> to
> see if you can find a converter that can convert the image into the WMF
> format.
>
> "Felix L J Mayer" <felix.mayer@objectaid.com> wrote in message
> news:dfsh6f$gl$1@news.eclipse.org...
>> Is that no to both questions or just the first one?
>>
>> "Pratik Shah" <none@unknown.com> wrote in message
>> news:dfpr3h$juj$1@news.eclipse.org...
>> > Sorry, no.
>> >
>> > "Felix L J Mayer" <felix.mayer@objectaid.com> wrote in message
>> > news:dfkr6e$qs$1@news.eclipse.org...
>> >> Does the GEF have support to copy a diagram as a WMF (Windows Meta
> File)
>> > via
>> >> the clipboard to another application? Or maybe this is part of SWT?
>> >>
>> >>
>> >
>> >
>>
>>
>
>

Re: Copy GEF diagram as WMF? [message #195716 is a reply to message #195448]

Tue, 13 September 2005 03:30

Eclipse User

Originally posted by: markus.nosse.gmx.net

Hi,

I have implemented a function to save a gef viewer as an image. One
possibility is to create an (SWT) image in memory and paint the figure you
want into this image. Here is how I did it:

ScrollingGraphicalViewer viewer = ...;
// get printable layers, only those will be included in the image
LayerManager lm =
(LayerManager)viewer.getEditPartRegistry().get(LayerManager. ID);
IFigure f = lm.getLayer(LayerConstants.PRINTABLE_LAYERS);

// use SWT features to capture the image
Image capture = new Image(viewer.getControl().getDisplay(),
f.getBounds().width, f.getBounds().height);
GC imageGC = new GC(capture);
Graphics graphics = new SWTGraphics(imageGC);
f.paint(graphics);

// save captured image to a file. again, this is SWT.
// Note that in v2.1 not too many graphic formats are supported.
// Refer to the ImageLoader source code to learn more
try {
ImageLoader imageloader = new ImageLoader();
imageloader.data = new ImageData[1];
imageloader.data[0] = capture.getImageData();
imageloader.save(filename, SWT.IMAGE_BMP);
} finally {
graphics.dispose();
imageGC.dispose();
capture.dispose();
}

-- markus

Re: Copy GEF diagram as WMF? [message #195753 is a reply to message #195716]

Tue, 13 September 2005 09:46

Eclipse User

Originally posted by: sunil_kamath.nohotspammail.com

"Markus" <markus.nosse@gmx.net> wrote in message
news:575e57d9bd925b92558b042a83a09ced$1@www.eclipse.org...
> Hi,
>
> I have implemented a function to save a gef viewer as an image. One
> possibility is to create an (SWT) image in memory and paint the figure you
> want into this image. Here is how I did it:
>
[snip]

GEF already does this.
See org.eclipse.draw2d.parts.ScrollableThumbnal, specifically the
SelectorFigure inner class.
---
Sunil

Re: Copy GEF diagram as WMF? [message #201333 is a reply to message #195753]

Mon, 31 October 2005 11:51

Eclipse User

For saving the image to the clipboard in BMP format, there is a very
useful data transfer class written by Philip Schatz at:

http://www.philschatz.com/space/ImageDataTransfer/

Benedict

Sunil Kamath wrote:
> "Markus" <markus.nosse@gmx.net> wrote in message
> news:575e57d9bd925b92558b042a83a09ced$1@www.eclipse.org...
>
>>Hi,
>>
>>I have implemented a function to save a gef viewer as an image. One
>>possibility is to create an (SWT) image in memory and paint the figure you
>>want into this image. Here is how I did it:
>>
>
> [snip]
>
> GEF already does this.
> See org.eclipse.draw2d.parts.ScrollableThumbnal, specifically the
> SelectorFigure inner class.
> ---
> Sunil
>
>

Re: Copy GEF diagram as WMF? [message #202428 is a reply to message #194961]

Wed, 09 November 2005 11:21

Eclipse User

Maybe you'll find this useful:

http://sourceforge.net/projects/tritos

It's not WMF but its successor EMF (not to be mistaken with Eclipse
Modeling Framework ;) ). Of course, it's only working with Win32.

Jens

Re: Copy GEF diagram as WMF? [message #243415 is a reply to message #201333]

Thu, 05 June 2008 23:51

Eclipse User

Originally posted by: nhadt.cybersoft-vn.com

Dear all,

Does someone know what is the license for Image data transfer written by
Philip Schatz?

Thanks a lot,
Nha Dang

benedict heal wrote:
>
> For saving the image to the clipboard in BMP format, there is a very
> useful data transfer class written by Philip Schatz at:
>
> http://www.philschatz.com/space/ImageDataTransfer/
>
> Benedict
>
>
>
> Sunil Kamath wrote:
>> "Markus" <markus.nosse@gmx.net> wrote in message
>> news:575e57d9bd925b92558b042a83a09ced$1@www.eclipse.org...
>>
>>> Hi,
>>>
>>> I have implemented a function to save a gef viewer as an image. One
>>> possibility is to create an (SWT) image in memory and paint the
>>> figure you want into this image. Here is how I did it:
>>>
>>
>> [snip]
>>
>> GEF already does this.
>> See org.eclipse.draw2d.parts.ScrollableThumbnal, specifically the
>> SelectorFigure inner class.
>> ---
>> Sunil
>>

Previous Topic:	Zest's GraphNode#initFigure() and Graph#registerItem() called twice unnecessarily?
Next Topic:	Problems with GEF diagram editor in a ViewPart

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Jul 23 05:25:45 EDT 2025

.:: Contact :: Home ::.

Breadcrumbs

Sign up to our Newsletter