Eclipse Community Forums: 4DIAC - Framework for Distributed Industrial Automation and Control » Compiling forte with xilinx toolchain failed

Home » Eclipse Projects » 4DIAC - Framework for Distributed Industrial Automation and Control » Compiling forte with xilinx toolchain failed

Compiling forte with xilinx toolchain failed [message #1828095]

Mon, 01 June 2020 09:11

Eclipse User

when i choose the arm-xilinx-linux-gnueabi-gcc,arm-xilinx-linux-gnueabi-g++
under toolchain in cmake, the errors occur

The C compiler identification is unknown
The CXX compiler identification is unknown

So can't we use the xlinx toolchain?

Re: Compiling forte with xilinx toolchain failed [message #1828118 is a reply to message #1828095]

Tue, 02 June 2020 03:02

Eclipse User

With that information I must admit I can not say it. But i would guess it is a setting issue because sofar we could get every toolchain working.

Re: Compiling forte with xilinx toolchain failed [message #1828120 is a reply to message #1828118]

Tue, 02 June 2020 03:15

Eclipse User

I installed vivado 2019.2 then i use the gnu under E:\Xilinx\Vitis\2019.2\gnu\aarch32\nt\gcc-arm-linux-gnueabi\bin
the the cmake-gui can configure it, but i don't know how to link a library(.a) with forte, in cmake-gui or develepment tool

Re: Compiling forte with xilinx toolchain failed [message #1828123 is a reply to message #1828120]

Tue, 02 June 2020 03:23

Eclipse User

never used that thing. any log messages that could help? more detailed error messages

Re: Compiling forte with xilinx toolchain failed [message #1828124 is a reply to message #1828123]

Tue, 02 June 2020 03:36

Eclipse User

he C compiler identification is unknown
The CXX compiler identification is unknown
Check for working C compiler: E:/M1600/Codesourcery/bin/arm-xilinx-linux-gnueabi-gcc
Check for working C compiler: E:/M1600/Codesourcery/bin/arm-xilinx-linux-gnueabi-gcc - broken
CMake Error at D:/1600/cmake-3.17.0-rc3-win64-x64/share/cmake-3.17/Modules/CMakeTestCCompiler.cmake:60 (message):
The C compiler

"E:/M1600/Codesourcery/bin/arm-xilinx-linux-gnueabi-gcc"

is not able to compile a simple test program.

It fails with the following output:

Change Dir: D:/1600/forte-incubation_1.12.0/bin12/CMakeFiles/CMakeTmp

Run Build Command(s):D:/PROGRA~1/mingw64/bin/mingw32-make.exe cmTC_d7343/fast && D:/PROGRA~1/mingw64/bin/mingw32-make.exe -f CMakeFiles\cmTC_d7343.dir\build.make CMakeFiles/cmTC_d7343.dir/build

mingw32-make.exe[1]: Entering directory 'D:/1600/forte-incubation_1.12.0/bin12/CMakeFiles/CMakeTmp'

Building C object CMakeFiles/cmTC_d7343.dir/testCCompiler.c.o

E:\M1600\Codesourcery\bin\arm-xilinx-linux-gnueabi-gcc -o CMakeFiles\cmTC_d7343.dir\testCCompiler.c.o -c D:\1600\forte-incubation_1.12.0\bin12\CMakeFiles\CMakeTmp\testCCompiler.c

process_begin: CreateProcess(E:\M1600\Codesourcery\bin\arm-xilinx-linux-gnueabi-gcc, E:\M1600\Codesourcery\bin\arm-xilinx-linux-gnueabi-gcc -o CMakeFiles\cmTC_d7343.dir\testCCompiler.c.o -c D:\1600\forte-incubation_1.12.0\bin12\CMakeFiles\CMakeTmp\testCCompiler.c, ...) failed.

make (e=193): Error 193

mingw32-make.exe[1]: *** [CMakeFiles\cmTC_d7343.dir\build.make:82: CMakeFiles/cmTC_d7343.dir/testCCompiler.c.o] Error 193

mingw32-make.exe[1]: Leaving directory 'D:/1600/forte-incubation_1.12.0/bin12/CMakeFiles/CMakeTmp'

mingw32-make.exe: *** [Makefile:137: cmTC_d7343/fast] Error 2

CMake will not be able to correctly generate this project.
Call Stack (most recent call first):
CMakeLists.txt:17 (PROJECT)

Configuring incomplete, errors occurred!
See also "D:/1600/forte-incubation_1.12.0/bin12/CMakeFiles/CMakeOutput.log".
See also "D:/1600/forte-incubation_1.12.0/bin12/CMakeFiles/CMakeError.log".

Attachment: snap1.png
(Size: 9.32KB, Downloaded 97 times)

[Updated on: Tue, 02 June 2020 03:37] by Moderator

Re: Compiling forte with xilinx toolchain failed [message #1828126 is a reply to message #1828124]

Tue, 02 June 2020 03:49

Eclipse User

the interesting information would be in:
See also "D:/1600/forte-incubation_1.12.0/bin12/CMakeFiles/CMakeOutput.log".
See also "D:/1600/forte-incubation_1.12.0/bin12/CMakeFiles/CMakeError.log".

but i also see a few things that you could consider:
1. I don't think that E:\M1600\Codesourcery\bin is the right directory as target root. In my setups the bin was never the correct one
2. if it is a very special platform you may need a target configuration cmake file with additional compiler and linker flags
3. since quite some time we recommend that the build directory should not be within the forte code that you downloaded. This makes it easier for you to seperate your developments from the offical forte code.

Re: Compiling forte with xilinx toolchain failed [message #1828129 is a reply to message #1828126]

Tue, 02 June 2020 04:18

Eclipse User

both
E:\M1600\Codesourcery\bin and E:/M1600/Codesourcery/arm-xilinx-linux-gnueabi/bin
didn't work, they had the same error in CMakeError.log

Compiler: E:/M1600/Codesourcery/arm-xilinx-linux-gnueabi/bin/gcc
Build flags:
Id flags:

The output was:
%1 is not a valid Win32 application

i downloaded two different versions of xilinx toolchian, but none of them worked.

Re: Compiling forte with xilinx toolchain failed [message #1828130 is a reply to message #1828126]

Tue, 02 June 2020 04:20

Eclipse User

No Message Body

Attachment: CMakeError.log
(Size: 6.60KB, Downloaded 109 times)

Re: Compiling forte with xilinx toolchain failed [message #1828135 is a reply to message #1828129]

Tue, 02 June 2020 05:15

Eclipse User

joy woo wrote on Tue, 02 June 2020 08:18

both
E:\M1600\Codesourcery\bin and E:/M1600/Codesourcery/arm-xilinx-linux-gnueabi/bin
didn't work, they had the same error in CMakeError.log

for me it is never a bin directory. for any linaro toolchain always the toolchain root file seems to work best.

joy woo wrote on Tue, 02 June 2020 08:18

Compiler: E:/M1600/Codesourcery/arm-xilinx-linux-gnueabi/bin/gcc
Build flags:
Id flags:

The output was:
%1 is not a valid Win32 application

i downloaded two different versions of xilinx toolchian, but none of them worked.

I think there are some cross compilation settings missing. Cmake is trying to check if the application generated works for your host OS. There are some options that can tweak that. Please search for cross compilation and CMake to check for them.

Re: Compiling forte with xilinx toolchain failed [message #1828141 is a reply to message #1828135]

Tue, 02 June 2020 10:16

Eclipse User

how to add libary .a into forte in cmake-gui ?

Re: Compiling forte with xilinx toolchain failed [message #1828142 is a reply to message #1828141]

Tue, 02 June 2020 10:20

Eclipse User

linker options?

Re: Compiling forte with xilinx toolchain failed [message #1828143 is a reply to message #1828142]

Tue, 02 June 2020 10:23

Eclipse User

I didn't find it

Attachment: s2.png
(Size: 46.00KB, Downloaded 96 times)

Re: Compiling forte with xilinx toolchain failed [message #1828416 is a reply to message #1828143]

Tue, 09 June 2020 08:42

Eclipse User

in CMakeList.txt under forte/src

if(FORTE_BUILD_EXECUTABLE)
ADD_EXECUTABLE (forte $<TARGET_OBJECTS:FORTE_LITE> ${SOURCE_EXECUTABLE_CPP} ${FORTE_EXECUTABLE_H})
set_target_properties(forte PROPERTIES LINK_FLAGS "${link_flags}")
TARGET_LINK_LIBRARIES (forte ${LINK_LIBRARY})
TARGET_LINK_LIBRARIES (forte ${ADT_LIBRARIES})
ADD_DEPENDENCIES (forte FORTE_LITE)
install(TARGETS forte RUNTIME DESTINATION bin)
message("Building executable")
endif(FORTE_BUILD_EXECUTABLE)

in another file CmakeList.txt
i add :
forte_add_include_directories(${CMAKE_CURRENT_SOURCE_DIR})
forte_add_sourcefile_h (ADT_Motion_Pulse.h ADT_Motion_Unit.h)
then i can compile static library into forte

Previous Topic:	Type Export in 4diac 1.12.2
Next Topic:	forte+freertos+lwip on stm32 flash problem

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Jul 24 23:40:58 EDT 2025

.:: Contact :: Home ::.

Breadcrumbs

Sign up to our Newsletter