Eclipse Community Forums: GEF

Home » Eclipse Projects » GEF » PolygonFigure

Tue, 14 September 2004 18:05

Eclipse User

Originally posted by: seasnake.gmx.li

I'm using a Polygon to draw a rhombus but i get a strange behavior:

When the rightmost vertex and the bottom vertex of rhombus match the bound
of the constrain used to place the Figure in editor then moving the edit
part with mouse lets the selection handles stay where the edit part was
and the Figure itself is moved. I can interrupt moving the Figure around
and start again, but this has no effect on selection handles.

Drawing a rhombus smaller or greater than the constrain provides the
desired behavior.

Is there a solution to avoid this problem?

Best regards
Ilja

Re: PolygonFigure [message #150877 is a reply to message #150863]

Tue, 14 September 2004 18:47

Eclipse User

I don't understand what you're saying. Are you saying that you're
experiencing this problem in the case where the rhombus is a square? Please
clarify what the problem is.

"Ilja" <seasnake@gmx.li> wrote in message news:ci7pus$6to$1@eclipse.org...
> I'm using a Polygon to draw a rhombus but i get a strange behavior:
>
> When the rightmost vertex and the bottom vertex of rhombus match the bound
> of the constrain used to place the Figure in editor then moving the edit
> part with mouse lets the selection handles stay where the edit part was
> and the Figure itself is moved. I can interrupt moving the Figure around
> and start again, but this has no effect on selection handles.
>
> Drawing a rhombus smaller or greater than the constrain provides the
> desired behavior.
>
> Is there a solution to avoid this problem?
>
> Best regards
> Ilja
>

Re: PolygonFigure [message #151101 is a reply to message #150863]

Wed, 15 September 2004 12:41

Eclipse User

Originally posted by: none.us.ibm.com

There is a Figure class called Polygon. It is not designed to be dragged or
placed by its bounds. Have you created your own class called
PolygonFigure??
"Ilja" <seasnake@gmx.li> wrote in message news:ci7pus$6to$1@eclipse.org...
> I'm using a Polygon to draw a rhombus but i get a strange behavior:
>
> When the rightmost vertex and the bottom vertex of rhombus match the bound
> of the constrain used to place the Figure in editor then moving the edit
> part with mouse lets the selection handles stay where the edit part was
> and the Figure itself is moved. I can interrupt moving the Figure around
> and start again, but this has no effect on selection handles.
>
> Drawing a rhombus smaller or greater than the constrain provides the
> desired behavior.
>
> Is there a solution to avoid this problem?
>
> Best regards
> Ilja
>

Re: PolygonFigure [message #151133 is a reply to message #151101]

Wed, 15 September 2004 15:39

Eclipse User

Originally posted by: seasnake.gmx.li

I didn't create a PolygonFigure. Here the refreshVisuals code:

protected void refreshVisuals() {
Association assoc = (Association) getModel();
Polygon outline = (Polygon) getFigure();
Point leftTopCornerLoc = assoc.getLocation();
Dimension size = assoc.getSizes();

PointList vertices = new PointList(4);

Point rhombusVertex = new Point();
// vertex in the top middle of the rect
rhombusVertex.x = leftTopCornerLoc.x + size.width / 2;
rhombusVertex.y = leftTopCornerLoc.y;
vertices.addPoint(rhombusVertex);

rhombusVertex = new Point();
// vertex in the right middle of the rect
rhombusVertex.x = leftTopCornerLoc.x + size.width;
rhombusVertex.y = leftTopCornerLoc.y + size.height / 2;
vertices.addPoint(rhombusVertex);

rhombusVertex = new Point();
// vertex in the bottom middle of the rect
rhombusVertex.x = leftTopCornerLoc.x + size.width / 2;
rhombusVertex.y = leftTopCornerLoc.y + size.height;
vertices.addPoint(rhombusVertex);

rhombusVertex = new Point();
// vertex in the left middle of the rect
rhombusVertex.x = leftTopCornerLoc.x;
rhombusVertex.y = leftTopCornerLoc.y + size.height / 2;
vertices.addPoint(rhombusVertex);

outline.setPoints(vertices);

Rectangle r = new Rectangle(leftTopCornerLoc, size);
((GraphicalEditPart) getParent()).setLayoutConstraint(this, outline,
r);
}

Randy Hudson wrote:

> There is a Figure class called Polygon. It is not designed to be dragged or
> placed by its bounds. Have you created your own class called
> PolygonFigure??
> "Ilja" <seasnake@gmx.li> wrote in message news:ci7pus$6to$1@eclipse.org...
> > I'm using a Polygon to draw a rhombus but i get a strange behavior:
> >
> > When the rightmost vertex and the bottom vertex of rhombus match the bound
> > of the constrain used to place the Figure in editor then moving the edit
> > part with mouse lets the selection handles stay where the edit part was
> > and the Figure itself is moved. I can interrupt moving the Figure around
> > and start again, but this has no effect on selection handles.
> >
> > Drawing a rhombus smaller or greater than the constrain provides the
> > desired behavior.
> >
> > Is there a solution to avoid this problem?
> >
> > Best regards
> > Ilja
> >

Re: PolygonFigure [message #151141 is a reply to message #150877]

Wed, 15 September 2004 15:40

Eclipse User

Originally posted by: seasnake.gmx.li

here is my code:

protected void refreshVisuals() {
Association assoc = (Association) getModel();
Polygon outline = (Polygon) getFigure();
Point leftTopCornerLoc = assoc.getLocation();
Dimension size = assoc.getSizes();

PointList vertices = new PointList(4);

Point rhombusVertex = new Point();
// vertex in the top middle of the rect
rhombusVertex.x = leftTopCornerLoc.x + size.width / 2;
rhombusVertex.y = leftTopCornerLoc.y;
vertices.addPoint(rhombusVertex);

rhombusVertex = new Point();
// vertex in the right middle of the rect
rhombusVertex.x = leftTopCornerLoc.x + size.width;
rhombusVertex.y = leftTopCornerLoc.y + size.height / 2;
vertices.addPoint(rhombusVertex);

rhombusVertex = new Point();
// vertex in the bottom middle of the rect
rhombusVertex.x = leftTopCornerLoc.x + size.width / 2;
rhombusVertex.y = leftTopCornerLoc.y + size.height;
vertices.addPoint(rhombusVertex);

rhombusVertex = new Point();
// vertex in the left middle of the rect
rhombusVertex.x = leftTopCornerLoc.x;
rhombusVertex.y = leftTopCornerLoc.y + size.height / 2;
vertices.addPoint(rhombusVertex);

outline.setPoints(vertices);

Rectangle r = new Rectangle(leftTopCornerLoc, size);
((GraphicalEditPart) getParent()).setLayoutConstraint(this, outline,
r);
}

Pratik Shah wrote:

> I don't understand what you're saying. Are you saying that you're
> experiencing this problem in the case where the rhombus is a square? Please
> clarify what the problem is.

> "Ilja" <seasnake@gmx.li> wrote in message news:ci7pus$6to$1@eclipse.org...
> > I'm using a Polygon to draw a rhombus but i get a strange behavior:
> >
> > When the rightmost vertex and the bottom vertex of rhombus match the bound
> > of the constrain used to place the Figure in editor then moving the edit
> > part with mouse lets the selection handles stay where the edit part was
> > and the Figure itself is moved. I can interrupt moving the Figure around
> > and start again, but this has no effect on selection handles.
> >
> > Drawing a rhombus smaller or greater than the constrain provides the
> > desired behavior.
> >
> > Is there a solution to avoid this problem?
> >
> > Best regards
> > Ilja
> >

Re: PolygonFigure [message #151149 is a reply to message #151133]

Wed, 15 September 2004 17:34

Eclipse User

Originally posted by: none.us.ibm.com

XYLayout will be calling setBounds() which is not supported by Polygon.
But, besides that, there is a bug in your code. You cannot paint on the
right and bottom sides of the bounding box, so you should either make the
box bigger, or bring in the points by 1 pixel.

"Ilja" <seasnake@gmx.li> wrote in message news:cia5pv$2ng$1@eclipse.org...
> I didn't create a PolygonFigure. Here the refreshVisuals code:
>
> protected void refreshVisuals() {
> Association assoc = (Association) getModel();
> Polygon outline = (Polygon) getFigure();
> Point leftTopCornerLoc = assoc.getLocation();
> Dimension size = assoc.getSizes();
>
> PointList vertices = new PointList(4);
>
> Point rhombusVertex = new Point();
> // vertex in the top middle of the rect
> rhombusVertex.x = leftTopCornerLoc.x + size.width / 2;
> rhombusVertex.y = leftTopCornerLoc.y;
> vertices.addPoint(rhombusVertex);
>
> rhombusVertex = new Point();
> // vertex in the right middle of the rect
> rhombusVertex.x = leftTopCornerLoc.x + size.width;
> rhombusVertex.y = leftTopCornerLoc.y + size.height / 2;
> vertices.addPoint(rhombusVertex);
>
> rhombusVertex = new Point();
> // vertex in the bottom middle of the rect
> rhombusVertex.x = leftTopCornerLoc.x + size.width / 2;
> rhombusVertex.y = leftTopCornerLoc.y + size.height;
> vertices.addPoint(rhombusVertex);
>
> rhombusVertex = new Point();
> // vertex in the left middle of the rect
> rhombusVertex.x = leftTopCornerLoc.x;
> rhombusVertex.y = leftTopCornerLoc.y + size.height / 2;
> vertices.addPoint(rhombusVertex);
>
> outline.setPoints(vertices);
>
>
> Rectangle r = new Rectangle(leftTopCornerLoc, size);
> ((GraphicalEditPart) getParent()).setLayoutConstraint(this, outline,
> r);
> }
>
> Randy Hudson wrote:
>
> > There is a Figure class called Polygon. It is not designed to be
dragged or
> > placed by its bounds. Have you created your own class called
> > PolygonFigure??
> > "Ilja" <seasnake@gmx.li> wrote in message
news:ci7pus$6to$1@eclipse.org...
> > > I'm using a Polygon to draw a rhombus but i get a strange behavior:
> > >
> > > When the rightmost vertex and the bottom vertex of rhombus match the
bound
> > > of the constrain used to place the Figure in editor then moving the
edit
> > > part with mouse lets the selection handles stay where the edit part
was
> > > and the Figure itself is moved. I can interrupt moving the Figure
around
> > > and start again, but this has no effect on selection handles.
> > >
> > > Drawing a rhombus smaller or greater than the constrain provides the
> > > desired behavior.
> > >
> > > Is there a solution to avoid this problem?
> > >
> > > Best regards
> > > Ilja
> > >
>
>

Re: PolygonFigure [message #151156 is a reply to message #151149]

Wed, 15 September 2004 17:59

Eclipse User

Originally posted by: seasnake.gmx.li

Hi Randy, thank you. Well there is no bug the "bug" will occur when I
whould subtract 1 from the width and the height. And this lead to behavior
described below.

I will follow your advise and just make my rhombus 1 pixel smaller than my
bounding rect.

Thank you for your help

Best regards
Ilja

Previous Topic:	Link Connection not deleted when connected to a child of a deleted parent.
Next Topic:	Hatching

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Sep 18 04:54:46 EDT 2025

.:: Contact :: Home ::.

Breadcrumbs

Sign up to our Newsletter