Home » Eclipse Projects » GEF » GEF Editor with Palette and Toolbar
| | |
| Re: GEF Editor with Palette and Toolbar [message #516410 is a reply to message #516388] |
Tue, 23 February 2010 20:35   |
 h1055071
Messages: 335
Registered: July 2009 |
Senior Member |
|
|
On 23/02/2010 20:13, Barry Dresdner wrote:
> Ah, excellent question/suggestion.
> Our UI team in their infinite wisdom prefers a toolbar within the editor
> along with a palette.
> We can actually get a GEF editor working with the toolbar as long as it
> doesn't have the palette (extends GraphicalEditor)
> Once we add the palette (extends GraphicalEditorWithFlyoutPalette), then we
> run into major issues.
> Most likely a layout issue or a problem with where the toolbar is added.
> thanks
>
> "Phillipus"<p.beauvoir@dadabeatnik.com> wrote in message
> news:hm1b9s$v99$1@build.eclipse.org...
>> On 23/02/2010 14:53, Barry Dresdner wrote:
>>> Hi, has anyone created a GEF editor with both a flyout palette and a
>>> toolbar? I need to create a graphical editor that supports zoom in and
>>> out,
>>> and contains a toolbar that does not zoom. I have tried creating an
>>> editor
>>> that extends GraphicalEditorWithFlyoutPalette, and I have overridden the
>>> createGraphicalViewer method. In createGraphicalViewer, I have attached
>>> a
>>> toolbar to the parent Composite. I also used a ScalableRootEditPart.
>>> However, I am running into different issues because of the palette. Any
>>> suggestions or reference(s) to example(s) would be greatly appreciated.
>>> Thanks alot - Barry
>>>
>>>
>>
>> Where is the toolbar? Why not put it on the main toolbat area of you app?
>>
>
>
Yes, I'm not a fan of localised toolbars. Sounds like you need to
experiment with the toolbar's parent.
|
|
|
| Re: GEF Editor with Palette and Toolbar [message #516411 is a reply to message #516410] |
Tue, 23 February 2010 16:04 |
Barry Dresdner
Messages: 75
Registered: July 2009 |
Member |
|
|
Yes. That's what we are doing. I was just hoping someone may have done
this already and can provide a little insight to help speed things along.
thanks
"Phillipus" <p.beauvoir@dadabeatnik.com> wrote in message
news:hm1e5o$mab$1@build.eclipse.org...
> On 23/02/2010 20:13, Barry Dresdner wrote:
>> Ah, excellent question/suggestion.
>> Our UI team in their infinite wisdom prefers a toolbar within the editor
>> along with a palette.
>> We can actually get a GEF editor working with the toolbar as long as it
>> doesn't have the palette (extends GraphicalEditor)
>> Once we add the palette (extends GraphicalEditorWithFlyoutPalette), then
>> we
>> run into major issues.
>> Most likely a layout issue or a problem with where the toolbar is added.
>> thanks
>>
>> "Phillipus"<p.beauvoir@dadabeatnik.com> wrote in message
>> news:hm1b9s$v99$1@build.eclipse.org...
>>> On 23/02/2010 14:53, Barry Dresdner wrote:
>>>> Hi, has anyone created a GEF editor with both a flyout palette and a
>>>> toolbar? I need to create a graphical editor that supports zoom in and
>>>> out,
>>>> and contains a toolbar that does not zoom. I have tried creating an
>>>> editor
>>>> that extends GraphicalEditorWithFlyoutPalette, and I have overridden
>>>> the
>>>> createGraphicalViewer method. In createGraphicalViewer, I have
>>>> attached
>>>> a
>>>> toolbar to the parent Composite. I also used a ScalableRootEditPart.
>>>> However, I am running into different issues because of the palette.
>>>> Any
>>>> suggestions or reference(s) to example(s) would be greatly appreciated.
>>>> Thanks alot - Barry
>>>>
>>>>
>>>
>>> Where is the toolbar? Why not put it on the main toolbat area of you
>>> app?
>>>
>>
>>
>
> Yes, I'm not a fan of localised toolbars. Sounds like you need to
> experiment with the toolbar's parent.
>
|
|
|
| Re: GEF Editor with Palette and Toolbar [message #516452 is a reply to message #516411] |
Wed, 24 February 2010 04:22 |
Vijay Raj
Messages: 608
Registered: July 2009 |
Senior Member |
|
|
Override createPartControl of your editor..
@Override
public void createPartControl(Composite parent)
{
Composite c = new Composite(parent, SWT.None);
c.setLayout(new GridLayout(1, true));
ToolBar tb = new ToolBar(c, SWT.None);
tb.setLayoutData(new org.eclipse.swt.layout.GridData(
org.eclipse.swt.layout.GridData.FILL_HORIZONTAL));
ToolItem ti1 = new ToolItem(tb, SWT.PUSH);
ti1.setText("Tool item 1");
ToolItem ti2 = new ToolItem(tb, SWT.PUSH);
ti2.setText("Tool item 2");
ToolItem ti3 = new ToolItem(tb, SWT.PUSH);
ti3.setText("Tool item 3");
ToolItem ti4 = new ToolItem(tb, SWT.PUSH);
ti4.setText("Tool item 4");
Composite composite = new Composite(c, SWT.None);
composite.setLayoutData(new GridData(GridData.FILL_BOTH));
composite.setLayout(new FillLayout());
super.createPartControl(composite);
}
is it this you want or somthing else...
---------------------
why, mr. Anderson, why, why do you persist?
Because I Choose To.
Regards,
Vijay
|
|
|
| Re: GEF Editor with Palette and Toolbar [message #516453 is a reply to message #516411] |
Wed, 24 February 2010 04:23 |
Vijay Raj
Messages: 608
Registered: July 2009 |
Senior Member |
|
|
Override createPartControl of your editor..
@Override
public void createPartControl(Composite parent)
{
Composite c = new Composite(parent, SWT.None);
c.setLayout(new GridLayout(1, true));
ToolBar tb = new ToolBar(c, SWT.None);
tb.setLayoutData(new org.eclipse.swt.layout.GridData(
org.eclipse.swt.layout.GridData.FILL_HORIZONTAL));
ToolItem ti1 = new ToolItem(tb, SWT.PUSH);
ti1.setText("Tool item 1");
ToolItem ti2 = new ToolItem(tb, SWT.PUSH);
ti2.setText("Tool item 2");
ToolItem ti3 = new ToolItem(tb, SWT.PUSH);
ti3.setText("Tool item 3");
ToolItem ti4 = new ToolItem(tb, SWT.PUSH);
ti4.setText("Tool item 4");
Composite composite = new Composite(c, SWT.None);
composite.setLayoutData(new GridData(GridData.FILL_BOTH));
composite.setLayout(new FillLayout());
super.createPartControl(composite);
}
is it this you want or somthing else...
---------------------
why, mr. Anderson, why, why do you persist?
Because I Choose To.
Regards,
Vijay
|
|
|
| Re: GEF Editor with Palette and Toolbar [message #516454 is a reply to message #516411] |
Wed, 24 February 2010 04:23 |
Vijay Raj
Messages: 608
Registered: July 2009 |
Senior Member |
|
|
| Quote: | Override createPartControl of your editor..
@Override
public void createPartControl(Composite parent)
{
Composite c = new Composite(parent, SWT.None);
c.setLayout(new GridLayout(1, true));
ToolBar tb = new ToolBar(c, SWT.None);
tb.setLayoutData(new org.eclipse.swt.layout.GridData(
org.eclipse.swt.layout.GridData.FILL_HORIZONTAL));
ToolItem ti1 = new ToolItem(tb, SWT.PUSH);
ti1.setText("Tool item 1");
ToolItem ti2 = new ToolItem(tb, SWT.PUSH);
ti2.setText("Tool item 2");
ToolItem ti3 = new ToolItem(tb, SWT.PUSH);
ti3.setText("Tool item 3");
ToolItem ti4 = new ToolItem(tb, SWT.PUSH);
ti4.setText("Tool item 4");
Composite composite = new Composite(c, SWT.None);
composite.setLayoutData(new GridData(GridData.FILL_BOTH));
composite.setLayout(new FillLayout());
super.createPartControl(composite);
}
is it this you want or somthing else...
|
i did this on shapes example and it worked...
---------------------
why, mr. Anderson, why, why do you persist?
Because I Choose To.
Regards,
Vijay
[Updated on: Wed, 24 February 2010 04:25] Report message to a moderator |
|
|
| Re: GEF Editor with Palette and Toolbar [message #516595 is a reply to message #516454] |
Wed, 24 February 2010 09:18 |
Barry Dresdner
Messages: 75
Registered: July 2009 |
Member |
|
|
Hi Vijay,
That is exactly what I needed!
It is simple and works beautifully with the palette.
thank you very much,
Barry
"vijay" <vijay.rajonline@gmail.com> wrote in message
news:hm29kp$lf2$1@build.eclipse.org...
> Override createPartControl of your editor..
>
> @Override
> public void createPartControl(Composite parent)
> {
> Composite c = new Composite(parent, SWT.None);
> c.setLayout(new GridLayout(1, true));
> ToolBar tb = new ToolBar(c, SWT.None);
> tb.setLayoutData(new org.eclipse.swt.layout.GridData(
> org.eclipse.swt.layout.GridData.FILL_HORIZONTAL));
> ToolItem ti1 = new ToolItem(tb, SWT.PUSH);
> ti1.setText("Tool item 1");
> ToolItem ti2 = new ToolItem(tb, SWT.PUSH);
> ti2.setText("Tool item 2");
> ToolItem ti3 = new ToolItem(tb, SWT.PUSH);
> ti3.setText("Tool item 3");
> ToolItem ti4 = new ToolItem(tb, SWT.PUSH);
> ti4.setText("Tool item 4");
> Composite composite = new Composite(c, SWT.None);
> composite.setLayoutData(new GridData(GridData.FILL_BOTH));
> composite.setLayout(new FillLayout());
> super.createPartControl(composite);
> }
> is it this you want or somthing else...
> --
> ---------------------
> Regards,
> Vijay
|
|
|
Goto Forum:
Current Time: Fri Apr 26 16:05:29 GMT 2024
Powered by FUDForum. Page generated in 0.04422 seconds |
] 
Search
Help
Register
Login
Home
