Skip to main content


Eclipse Community Forums
Forum Search:

Search      Help    Register    Login    Home
Home » Modeling » EMF » Re: [Teneo] Generate CDO - Hibernate OR Mapping
Re: [Teneo] Generate CDO - Hibernate OR Mapping [message #509314] Thu, 21 January 2010 22:43 Go to next message
Martin Taal is currently offline Martin TaalFriend
Messages: 5468
Registered: July 2009
Senior Member
Hi Austin,
I am afraid that the information on that elver.org page is quite outdated. I am currently writing documentation for CDO
and Teneo in the eclipse wiki which will replace this page. I am almost finished with a first complete draft (almost ==
about an hour of work left which I am doing right now).

The documentation can be found here:
http://wiki.eclipse.org/CDO_Hibernate_Store

One tutorial page is not yet finished and I need to make a small diagram on another page, but other than that it should
all be quite informative (I hope...).

One disclaimer, I want to ask Eike and the rest of the CDO team for feedback and it is therefore possible that the
content and structure will change. Ofcourse if you have feedback then that's also welcomed.

The last thing is, to use CDO and Teneo together you need to use CDO 3.0 and Teneo 1.2.0. The quality of the CDO
Hibernate store has dramatically improved in the CDO 3.0 development phase. Currently 540 testcases pass (out of 580),
the remaining 40 test cases are primarily 'officially' not supported features (auditing). The page above explains
how/where you can download CDO 3.0 and the other dependencies.

And support for CDO and Teneo is given on the main EMF newsgroup which I added to the cc.

gr. Martin

Austin Teng wrote:
> Sorry, just realized that my news client was missing my email address.
>

> -- Austin
>
> <address_is@invalid.invalid> wrote:
>> Teneo gurus,
>>
>> I'm missing the CDO option in the Teneo context menu referred to by
>> http://www.elver.org/hibernate/cdo.html Is there a specific version
>> of
>> Teneo required for this to appear? Is there something I need to do to
>> make Teneo "aware" of CDO?
>>
>> CDO: 2.0 20090616
>> Teneo: 1.1.2 20091216
>> EMF: 2.5
>> Eclipse: 3.5
>> Hibernate: 3.3.2
>>
>> Thanks,
>> Austin


--

With Regards, Martin Taal

Springsite/Elver.org
Office: Hardwareweg 4, 3821 BV Amersfoort
Postal: Nassaulaan 7, 3941 EC Doorn
The Netherlands
Cell: +31 (0)6 288 48 943
Tel: +31 (0)84 420 2397
Fax: +31 (0)84 225 9307
Mail: mtaal@springsite.com - mtaal@elver.org
Web: www.springsite.com - www.elver.org
Re: [Teneo] Generate CDO - Hibernate OR Mapping [message #509328 is a reply to message #509314] Fri, 22 January 2010 00:54 Go to previous messageGo to next message
Eclipse UserFriend
Originally posted by: austin.teng.siemens.com

Martin,

Thanks for such a quick and complete response. I look forward to
looking through the new documentation. I'll direct future
questions/feedback to the main EMF newsgroup.

Thanks,
Austin


On 1/21/10 4:43 PM, Martin Taal wrote:
> Hi Austin,
> I am afraid that the information on that elver.org page is quite
> outdated. I am currently writing documentation for CDO and Teneo in the
> eclipse wiki which will replace this page. I am almost finished with a
> first complete draft (almost == about an hour of work left which I am
> doing right now).
>
> The documentation can be found here:
> http://wiki.eclipse.org/CDO_Hibernate_Store
>
> One tutorial page is not yet finished and I need to make a small diagram
> on another page, but other than that it should all be quite informative
> (I hope...).
>
> One disclaimer, I want to ask Eike and the rest of the CDO team for
> feedback and it is therefore possible that the content and structure
> will change. Ofcourse if you have feedback then that's also welcomed.
>
> The last thing is, to use CDO and Teneo together you need to use CDO 3.0
> and Teneo 1.2.0. The quality of the CDO Hibernate store has dramatically
> improved in the CDO 3.0 development phase. Currently 540 testcases pass
> (out of 580), the remaining 40 test cases are primarily 'officially' not
> supported features (auditing). The page above explains how/where you can
> download CDO 3.0 and the other dependencies.
>
> And support for CDO and Teneo is given on the main EMF newsgroup which I
> added to the cc.
>
> gr. Martin
>
> Austin Teng wrote:
>> Sorry, just realized that my news client was missing my email address.
>>
>
>> -- Austin
>>
>> <address_is@invalid.invalid> wrote:
>>> Teneo gurus,
>>>
>>> I'm missing the CDO option in the Teneo context menu referred to by
>>> http://www.elver.org/hibernate/cdo.html Is there a specific version
>>> of
>>> Teneo required for this to appear? Is there something I need to do to
>>> make Teneo "aware" of CDO?
>>>
>>> CDO: 2.0 20090616 Teneo: 1.1.2 20091216
>>> EMF: 2.5
>>> Eclipse: 3.5
>>> Hibernate: 3.3.2
>>>
>>> Thanks,
>>> Austin
>
>
Re: [Teneo] Generate CDO - Hibernate OR Mapping [message #509360 is a reply to message #509314] Fri, 22 January 2010 04:00 Go to previous messageGo to next message
Eike Stepper is currently offline Eike StepperFriend
Messages: 6451
Registered: July 2009
Senior Member
Hi Martin,

You're setting the bar high! That's excellent.

I started to review the articles. May I apply a few changes directly in
the wiki? I suspect that's why it is in a wiki :P

Cheers
/Eike

----
http://thegordian.blogspot.com
http://twitter.com/eikestepper



Martin Taal schrieb:
> Hi Austin,
> I am afraid that the information on that elver.org page is quite
> outdated. I am currently writing documentation for CDO and Teneo in
> the eclipse wiki which will replace this page. I am almost finished
> with a first complete draft (almost == about an hour of work left
> which I am doing right now).
>
> The documentation can be found here:
> http://wiki.eclipse.org/CDO_Hibernate_Store
>
> One tutorial page is not yet finished and I need to make a small
> diagram on another page, but other than that it should all be quite
> informative (I hope...).
>
> One disclaimer, I want to ask Eike and the rest of the CDO team for
> feedback and it is therefore possible that the content and structure
> will change. Ofcourse if you have feedback then that's also welcomed.
>
> The last thing is, to use CDO and Teneo together you need to use CDO
> 3.0 and Teneo 1.2.0. The quality of the CDO Hibernate store has
> dramatically improved in the CDO 3.0 development phase. Currently 540
> testcases pass (out of 580), the remaining 40 test cases are primarily
> 'officially' not supported features (auditing). The page above
> explains how/where you can download CDO 3.0 and the other dependencies.
>
> And support for CDO and Teneo is given on the main EMF newsgroup which
> I added to the cc.
>
> gr. Martin
>
> Austin Teng wrote:
>> Sorry, just realized that my news client was missing my email address.
>>
>
>> -- Austin
>>
>> <address_is@invalid.invalid> wrote:
>>> Teneo gurus,
>>>
>>> I'm missing the CDO option in the Teneo context menu referred to by
>>> http://www.elver.org/hibernate/cdo.html Is there a specific version
>>> of
>>> Teneo required for this to appear? Is there something I need to do to
>>> make Teneo "aware" of CDO?
>>>
>>> CDO: 2.0 20090616 Teneo: 1.1.2 20091216
>>> EMF: 2.5
>>> Eclipse: 3.5
>>> Hibernate: 3.3.2
>>>
>>> Thanks,
>>> Austin
>
>


Re: [Teneo] Generate CDO - Hibernate OR Mapping [message #509415 is a reply to message #509360] Fri, 22 January 2010 11:56 Go to previous message
Martin Taal is currently offline Martin TaalFriend
Messages: 5468
Registered: July 2009
Senior Member
Hi Eike,
Yes please just make the changes, as you say it is a wiki :-)

gr. Martin

Eike Stepper wrote:
> Hi Martin,
>
> You're setting the bar high! That's excellent.
>
> I started to review the articles. May I apply a few changes directly in
> the wiki? I suspect that's why it is in a wiki :P
>
> Cheers
> /Eike
>
> ----
> http://thegordian.blogspot.com
> http://twitter.com/eikestepper
>
>
>
> Martin Taal schrieb:
>> Hi Austin,
>> I am afraid that the information on that elver.org page is quite
>> outdated. I am currently writing documentation for CDO and Teneo in
>> the eclipse wiki which will replace this page. I am almost finished
>> with a first complete draft (almost == about an hour of work left
>> which I am doing right now).
>>
>> The documentation can be found here:
>> http://wiki.eclipse.org/CDO_Hibernate_Store
>>
>> One tutorial page is not yet finished and I need to make a small
>> diagram on another page, but other than that it should all be quite
>> informative (I hope...).
>>
>> One disclaimer, I want to ask Eike and the rest of the CDO team for
>> feedback and it is therefore possible that the content and structure
>> will change. Ofcourse if you have feedback then that's also welcomed.
>>
>> The last thing is, to use CDO and Teneo together you need to use CDO
>> 3.0 and Teneo 1.2.0. The quality of the CDO Hibernate store has
>> dramatically improved in the CDO 3.0 development phase. Currently 540
>> testcases pass (out of 580), the remaining 40 test cases are primarily
>> 'officially' not supported features (auditing). The page above
>> explains how/where you can download CDO 3.0 and the other dependencies.
>>
>> And support for CDO and Teneo is given on the main EMF newsgroup which
>> I added to the cc.
>>
>> gr. Martin
>>
>> Austin Teng wrote:
>>> Sorry, just realized that my news client was missing my email address.
>>>
>>> -- Austin
>>>
>>> <address_is@invalid.invalid> wrote:
>>>> Teneo gurus,
>>>>
>>>> I'm missing the CDO option in the Teneo context menu referred to by
>>>> http://www.elver.org/hibernate/cdo.html Is there a specific version
>>>> of
>>>> Teneo required for this to appear? Is there something I need to do to
>>>> make Teneo "aware" of CDO?
>>>>
>>>> CDO: 2.0 20090616 Teneo: 1.1.2 20091216
>>>> EMF: 2.5
>>>> Eclipse: 3.5
>>>> Hibernate: 3.3.2
>>>>
>>>> Thanks,
>>>> Austin
>>


--

With Regards, Martin Taal

Springsite/Elver.org
Office: Hardwareweg 4, 3821 BV Amersfoort
Postal: Nassaulaan 7, 3941 EC Doorn
The Netherlands
Cell: +31 (0)6 288 48 943
Tel: +31 (0)84 420 2397
Fax: +31 (0)84 225 9307
Mail: mtaal@springsite.com - mtaal@elver.org
Web: www.springsite.com - www.elver.org
Previous Topic:[CDO] Graceful server shutdown when running without a console
Next Topic:Root class for models?
Goto Forum:
  


Current Time: Thu Nov 21 11:32:35 GMT 2019

Powered by FUDForum. Page generated in 0.02046 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.2.
Copyright ©2001-2010 FUDforum Bulletin Board Software

Back to the top