Eclipse Community Forums: M2T (model-to-text transformation)

Help

Home

Home » Modeling » M2T (model-to-text transformation) » [xpand] ignores applied stereotypes

Show: Today's Messages :: Show Polls :: Message Navigator

[xpand] ignores applied stereotypes [message #500256]

Wed, 25 November 2009 14:11

Andre Albert

Messages: 25
Registered: July 2009

Junior Member

i started updgrading from oaw4.2 to the current eclipse.xpand based on.

I am using an uml2 3.0.0 based model.

unfortunately, all my template do not work correctly since the do not properly recognize applied stereotypes. Either

«DEFINE root FOR MyProfile::MyStereotype»
or
(MyProfile::MyStereotype).isInstance(elem)

wont work as expected.

Reading in the model with its applied profiles / stereotypes did not throw any exceptions.

the workflow looks like

<workflow>

<bean class="org.eclipse.emf.mwe.utils.StandaloneSetup">
<platformUri value="../ground-core-model/" />
<registerGeneratedEPackage value="org.eclipse.uml2.uml.UMLPackage"/>
<registerEcoreFile value="../ground-core-model/Profiles/${projectProfileFile}"/ >
</bean>

<component class="org.eclipse.emf.mwe.utils.Reader">
<uri value="${modelFile}" />
<modelSlot value="${modelSlot}" />
</component>

<component id="generator" class="org.eclipse.xpand2.Generator" srcPath="${baseDir}">
<metaModel idRef="uml2"/>

<metaModel id="entityProfile" class="org.eclipse.xtend.typesystem.uml2.profile.ProfileMetaModel ">
<profile value="../ground-core-model/Profiles/${entityProfileFile}"/ >
</metaModel>

<expand value="templates::Root::Root FOR ${modelSlot}"/>

<outlet path="${srcGenPath}">
<postprocessor class="org.eclipse.xpand2.output.JavaBeautifier" configFile="oaw/formatter.xml" />

</outlet>

</component>
</workflow>

does someone have a little hint for me?

Thanks
Andre

Report message to a moderator

Re: [xpand] ignores applied stereotypes [message #500269 is a reply to message #500256]

Wed, 25 November 2009 14:26

ekkehard gentz

Messages: 118
Registered: July 2009
Location: rosenheim, Germany, bavar...

Senior Member

This is a multi-part message in MIME format.
--------------070602070209080504010306
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit

I have not the time to look at this in detail yet, because just
preparing democamp in frankfurt tomorrow...

but perhaps it helps: I have summarized my experiences migrating from
oaw to xpand/xtend/mwe here:
http://ekkescorner.wordpress.com/blog-series/modeling-oaw/

ekke

Andre Albert schrieb:
> i started updgrading from oaw4.2 to the current eclipse.xpand based on.
>
> I am using an uml2 3.0.0 based model.
>
> unfortunately, all my template do not work correctly since the do not
> properly recognize applied stereotypes. Either
>
> «DEFINE root FOR MyProfile::MyStereotype»
> or (MyProfile::MyStereotype).isInstance(elem)
>
> wont work as expected.
>
> Reading in the model with its applied profiles / stereotypes did not
> throw any exceptions.
>
> the workflow looks like
>
> <workflow>
>
> <bean class="org.eclipse.emf.mwe.utils.StandaloneSetup">
> <platformUri value="../ground-core-model/" />
> <registerGeneratedEPackage
> value="org.eclipse.uml2.uml.UMLPackage"/>
> <registerEcoreFile
> value="../ground-core-model/Profiles/${projectProfileFile}"/ >
> </bean>
>
> <component class="org.eclipse.emf.mwe.utils.Reader">
> <uri value="${modelFile}" />
> <modelSlot value="${modelSlot}" />
> </component>
>
> <component id="generator" class="org.eclipse.xpand2.Generator"
> srcPath="${baseDir}">
> <metaModel idRef="uml2"/>
>
> <metaModel id="entityProfile"
> class="org.eclipse.xtend.typesystem.uml2.profile.ProfileMetaModel ">
> <profile
> value="../ground-core-model/Profiles/${entityProfileFile}"/ >
> </metaModel>
>
> <expand value="templates::Root::Root FOR ${modelSlot}"/>
>
> <outlet path="${srcGenPath}">
> <postprocessor
> class="org.eclipse.xpand2.output.JavaBeautifier"
> configFile="oaw/formatter.xml" />
>
> </outlet>
>
> </component>
> </workflow>
>
> does someone have a little hint for me?
>
> Thanks
> Andre

--

ekke (ekkehard gentz)
independent software-architect
senior erp-consultant
eclipse | osgi | equinox | mdsd | oaw | emf | uml
max-josefs-platz 30, D-83022 rosenheim, germany
mailto:ekke@ekkes-corner.org
homepage (de): http://gentz-software.de
blog (en): http://ekkes-corner.org
twitter: @ekkescorner
skype: ekkes-corner
Steuer-Nr: 156/220/30931 FA Rosenheim, UST-ID: DE189929490

--------------070602070209080504010306
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: 8bit

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=UTF-8" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
I have not the time to look at this in detail yet, because just
preparing democamp in frankfurt tomorrow... 
 
but perhaps it helps: I have summarized my experiences migrating from
oaw to xpand/xtend/mwe here: 
<a class="moz-txt-link-freetext" href="http://ekkescorner.wordpress.com/blog-series/modeling-oaw/">http://ekkescorner.wordpress.com/blog-series/modeling-oaw/</a> 
 
ekke 
 
Andre Albert schrieb:
<blockquote cite="mid:hejdur$6dj$1@build.eclipse.org" type="cite">i
started updgrading from oaw4.2 to the current eclipse.xpand based on.
 
 
I am using an uml2 3.0.0 based model.
 
 
unfortunately, all my template do not work correctly since the do not
properly recognize applied stereotypes. Either
 
 
«DEFINE root FOR MyProfile::MyStereotype»
 
or (MyProfile::MyStereotype).isInstance(elem)
 
 
wont work as expected.
 
 
Reading in the model with its applied profiles / stereotypes did not
throw any exceptions.
 
 
the workflow looks like
 
 
<workflow>
 
 
 <bean class="org.eclipse.emf.mwe.utils.StandaloneSetup">
 
 <platformUri value="../ground-core-model/" />
 
 <registerGeneratedEPackage
value="org.eclipse.uml2.uml.UMLPackage"/>
 
 <registerEcoreFile
value="../ground-core-model/Profiles/${projectProfileFile}"/ >
 
 </bean>
 
 
 <component class="org.eclipse.emf.mwe.utils.Reader">
 
 <uri value="${modelFile}" />
 
 <modelSlot value="${modelSlot}" />
 
 </component>
 
 
 <component id="generator" class="org.eclipse.xpand2.Generator"
srcPath="${baseDir}">
 
 <metaModel idRef="uml2"/>
 
 
 <metaModel id="entityProfile"
class="org.eclipse.xtend.typesystem.uml2.profile.ProfileMetaModel ">
 
 <profile
value="../ground-core-model/Profiles/${entityProfileFile}"/ >
 
 </metaModel>
 
 
 <expand value="templates::Root::Root FOR ${modelSlot}"/>
 
 
 <outlet path="${srcGenPath}">
 
 <postprocessor
class="org.eclipse.xpand2.output.JavaBeautifier"
configFile="oaw/formatter.xml" />
 
 
 </outlet>
 
 
 </component>
 
</workflow>
 
 
does someone have a little hint for me?
 
 
Thanks
 
Andre
 
</blockquote>
 
 
<div class="moz-signature">-- 
 ekke (ekkehard gentz) 
 independent software-architect 
senior erp-consultant 
 eclipse | osgi | equinox | mdsd | oaw | emf |
uml 
max-josefs-platz 30, D-83022 rosenheim, germany 
<a class="moz-txt-link-freetext" href="mailto:ekke@ekkes-corner.org">mailto:ekke@ekkes-corner.org</a> 
homepage (de): <a class="moz-txt-link-freetext" href="http://gentz-software.de">http://gentz-software.de</a> 
blog (en): <a class="moz-txt-link-freetext" href="http://ekkes-corner.org">http://ekkes-corner.org</a> 
twitter: @ekkescorner 
skype: ekkes-corner 
 Steuer-Nr: 156/220/30931 FA Rosenheim, UST-ID:
DE189929490 
 
</div>
</body>
</html>

--------------070602070209080504010306--

ekke
independent software architect

blog: http://ekkes-corner.org
twitter: @ekkescorner

Report message to a moderator

Re: [xpand] ignores applied stereotypes [message #500282 is a reply to message #500256]

Wed, 25 November 2009 14:59

Andre Albert

Messages: 25
Registered: July 2009

Junior Member

thanks for the link

it look interesting for my scenario..
currently starting to reading it

Report message to a moderator

Re: [xpand] ignores applied stereotypes [message #500347 is a reply to message #500256]

Wed, 25 November 2009 17:35

Karsten Thoms

Messages: 762
Registered: July 2009
Location: Dortmund, Germany

Senior Member

Hi Andre!

Use only the ProfileMetaModel, not the UML2 metamodel. The UML2 metamodel is implicitly used by the ProfileMetaModel now.

~Karsten

Need professional support for Xtext, EMF, Eclipse IDE?
Go to: http://devhub.karakun.com
Twitter : @kthoms
Blog : www.karsten-thoms.de

Report message to a moderator

Re: [xpand] ignores applied stereotypes [message #500505 is a reply to message #500256]

Thu, 26 November 2009 13:11

Andre Albert

Messages: 25
Registered: July 2009

Junior Member

Thanks for the answers.

I retested my workflow again and recognized that the handling of stereotype seems to be different to oaw4. A short example template:

«DEFINE Root FOR MyProfile::MyStereotype»
[EXPAND1 Statements here]
«ENDDEFINE»

«DEFINE Root FOR uml::Component»
«IF !(MyProfile::MyStereotype::Project).isInstance(this)»
[EXPAND2 Statements here]
«ENDIF»
[EXPAND3 Statements here]
«ENDDEFINE»

running this template:
EXPAND2 and EXPAND3 become evaluated.

Is it right that the previous statement «DEFINE Root FOR MyProfile::MyStereotype»
as not valid anymore?
I would rather prefer the first on since it is more descriptive instead of some IF switches.

Greetings

Report message to a moderator

Re: [xpand] ignores applied stereotypes [message #500509 is a reply to message #500256]

Thu, 26 November 2009 13:26

Andre Albert

Messages: 25
Registered: July 2009

Junior Member

I am sorry, there was a typing error. There was an ! before the IF evaluation.
So in general my basic problem is still existent.

My eclipse UML Model Editor (the tree) shows all the applied stereotypes, but xpand seems to not recognize them

Report message to a moderator

Re: [xpand] ignores applied stereotypes [message #500531 is a reply to message #500256]

Thu, 26 November 2009 14:35

Andre Albert

Messages: 25
Registered: July 2009

Junior Member

Does this have something to do with the uml2 2.0.0 to uml2 3.0.0 switch.

If I model and define a profile, the source attribute of eAnnotations defining the profile has a reference to "http://www.eclipse.org/uml2/2.0.0/UML"
this also applies to the eAnnotations of the element inside the profile definition

After manually modify them to "http://www.eclipse.org/uml2/3.0.0/UML"
it is not possible to apply this profile anymore.

Does someone have a running workflow for uml2 3.0.0 based models with applied profiles? Please paste it here so that i can look if i missed something to configure

Report message to a moderator

Re: [xpand] ignores applied stereotypes [message #501421 is a reply to message #500256]

Wed, 02 December 2009 09:50

Andre Albert

Messages: 25
Registered: July 2009

Junior Member

Hello,

does the not-resolving of profile stereotypes have something to do with my standalone environment.

Do platform:/resource statements work when not running within a plugin?

I do start my workflows with an ant task which references the required eclipse jar libraries directly. There is no OSGi involved.

Using oaw4.2 this works fine... but after the switch to eclipse.xpand
i do have these profile/stereotype problems

Now i switched back to my previous oaw4.2 environment to be able to work further.. But i realy would to upgrade to the latest eclipse integrated version.

greetings,
andre

Report message to a moderator

Re: [xpand] ignores applied stereotypes [message #501427 is a reply to message #501421]

Wed, 02 December 2009 10:01

ekkehard gentz

Messages: 118
Registered: July 2009
Location: rosenheim, Germany, bavar...

Senior Member

This is a multi-part message in MIME format.
--------------070608060700030902060508
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit

Andre Albert schrieb:
> ...
>
> Using oaw4.2 this works fine... but after the switch to eclipse.xpand
> i do have these profile/stereotype problems
> Now i switched back to my previous oaw4.2 environment to be able to
> work further.. But i realy would to upgrade to the latest eclipse
> integrated version.
>
> greetings,
> andre
andre,

are you using eclipse galileo or helios ?

ekke

--

ekke (ekkehard gentz)
independent software-architect
senior erp-consultant
eclipse | osgi | equinox | mdsd | oaw | emf | uml
max-josefs-platz 30, D-83022 rosenheim, germany
mailto:ekke@ekkes-corner.org
homepage (de): http://gentz-software.de
blog (en): http://ekkes-corner.org
twitter: @ekkescorner
skype: ekkes-corner
Steuer-Nr: 156/220/30931 FA Rosenheim, UST-ID: DE189929490

--------------070608060700030902060508
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: 7bit

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=UTF-8" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Andre Albert schrieb:
<blockquote cite="mid:hf5d8t$og7$1@build.eclipse.org" type="cite">... 
 
Using oaw4.2 this works fine... but after the switch to eclipse.xpand
 
i do have these profile/stereotype problems 
Now i switched back to my previous oaw4.2 environment to be able to
work further.. But i realy would to upgrade to the latest eclipse
integrated version.
 
 
greetings,
 
andre
 
</blockquote>
andre, 
 
are you using eclipse galileo or helios ? 
 
ekke 
 
<div class="moz-signature">-- 
 ekke (ekkehard gentz) 
 independent software-architect 
senior erp-consultant 
 eclipse | osgi | equinox | mdsd | oaw | emf |
uml 
max-josefs-platz 30, D-83022 rosenheim, germany 
<a class="moz-txt-link-freetext" href="mailto:ekke@ekkes-corner.org">mailto:ekke@ekkes-corner.org</a> 
homepage (de): <a class="moz-txt-link-freetext" href="http://gentz-software.de">http://gentz-software.de</a> 
blog (en): <a class="moz-txt-link-freetext" href="http://ekkes-corner.org">http://ekkes-corner.org</a> 
twitter: @ekkescorner 
skype: ekkes-corner 
 Steuer-Nr: 156/220/30931 FA Rosenheim, UST-ID:
DE189929490 
 
</div>
</body>
</html>

--------------070608060700030902060508--

ekke
independent software architect

blog: http://ekkes-corner.org
twitter: @ekkescorner

Report message to a moderator

Re: [xpand] ignores applied stereotypes [message #501429 is a reply to message #500256]

Wed, 02 December 2009 10:09

Andre Albert

Messages: 25
Registered: July 2009

Junior Member

Hi,
thanks for the quick reply.

I do use eclipse 3.5.1 which is galileo.

i did donwload the "Eclipse Modeling Tools (includes Incubating components) (371 MB)" packaged eclipse which is listed at http://www.eclipse.org/downloads/

Report message to a moderator

Re: [xpand] ignores applied stereotypes [message #501439 is a reply to message #501429]

Wed, 02 December 2009 11:00

ekkehard gentz

Messages: 118
Registered: July 2009
Location: rosenheim, Germany, bavar...

Senior Member

This is a multi-part message in MIME format.
--------------070206000808010707050504
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit

Andre Albert schrieb:
> Hi,
> thanks for the quick reply.
>
> I do use eclipse 3.5.1 which is galileo.
>
> i did donwload the "Eclipse Modeling Tools (includes Incubating
> components) (371 MB)" packaged eclipse which is listed at
> http://www.eclipse.org/downloads/
>
I have no problems with galileo and 0.7.2 - yetserday I got problems
using newest helios + emf + uml ... still testing what causes it

--

ekke (ekkehard gentz)
independent software-architect
senior erp-consultant
eclipse | osgi | equinox | mdsd | oaw | emf | uml
max-josefs-platz 30, D-83022 rosenheim, germany
mailto:ekke@ekkes-corner.org
homepage (de): http://gentz-software.de
blog (en): http://ekkes-corner.org
twitter: @ekkescorner
skype: ekkes-corner
Steuer-Nr: 156/220/30931 FA Rosenheim, UST-ID: DE189929490

--------------070206000808010707050504
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: 8bit

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=UTF-8" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Andre Albert schrieb:
<blockquote cite="mid:hf5edf$ufd$1@build.eclipse.org" type="cite">Hi,
 
thanks for the quick reply.
 
 
I do use eclipse 3.5.1 which is galileo.
 
 
i did donwload the "Eclipse Modeling Tools (includes Incubating
components) (371 MB)" packaged eclipse which is listed at
<a class="moz-txt-link-freetext" href="http://www.eclipse.org/downloads/">http://www.eclipse.org/downloads/</a>
 
 
</blockquote>
I have no problems with galileo and 0.7.2 - yetserday I got problems
using newest helios + emf + uml ... still testing what causes it 
 
<div class="moz-signature">-- 
 ekke (ekkehard gentz) 
 independent software-architect 
senior erp-consultant 
 eclipse | osgi | equinox | mdsd | oaw | emf |
uml 
max-josefs-platz 30, D-83022 rosenheim, germany 
<a class="moz-txt-link-freetext" href="mailto:ekke@ekkes-corner.org">mailto:ekke@ekkes-corner.org</a> 
homepage (de): <a class="moz-txt-link-freetext" href="http://gentz-software.de">http://gentz-software.de</a> 
blog (en): <a class="moz-txt-link-freetext" href="http://ekkes-corner.org">http://ekkes-corner.org</a> 
twitter: @ekkescorner 
skype: ekkes-corner 
 Steuer-Nr: 156/220/30931 FA Rosenheim, UST-ID:
DE189929490 
 
</div>
</body>
</html>

--------------070206000808010707050504--

ekke
independent software architect

blog: http://ekkes-corner.org
twitter: @ekkescorner

Report message to a moderator

Re: [xpand] ignores applied stereotypes [message #501807 is a reply to message #500256]

Thu, 03 December 2009 21:38

Andre Albert

Messages: 25
Registered: July 2009

Junior Member

Hello again,

to avoid switching back to oaw4.2, I upload a simple scenario of an uml model (containing only one class) and a profile (only one stereotype).
There is a simple workflow that triggers a simple xpt template with only 3 rules.

I uploaded this simple standalone scenario to free file hoster.
Since working standalone, all required libs are packaged inside the zipped eclipse project. Also a generate.xml Ant script can be found for a quick run.
All the required libs are from the same eclipse version (there should be no internal conflicts)

The link is:

http://www.filedropper.com/xpandsimple

Please, can some working with xpand look over this simple example and look why this stereotype is ignored?

thanks..

greetings, andre

[Updated on: Thu, 03 December 2009 21:42]

Report message to a moderator

Re: [xpand] ignores applied stereotypes [message #502077 is a reply to message #501807]

Sat, 05 December 2009 09:01

Christian Dietrich

Messages: 14720
Registered: July 2009

Senior Member

hello Andre,

modifiying the workflow like this sould do the trick in your sample

<component class="org.eclipse.emf.mwe.utils.Reader">
			<uri value="platform:/resource/OAWtest/model/Model.uml" />
			<modelSlot value="model" />
	</component>

for more information have a look at https://bugs.eclipse.org/bugs/show_bug.cgi?id=284464 too.

Christian

Twitter : @chrdietrich
Blog : https://www.dietrich-it.de
Day Job: https://www.everest-systems.com

Report message to a moderator

Re: [xpand] ignores applied stereotypes [message #502079 is a reply to message #500256]

Sat, 05 December 2009 09:32

Andre Albert

Messages: 25
Registered: July 2009

Junior Member

Thank you really much Christian,

you make my day, this solved the problem. I am happy that i can migrate my project now.

Greetings,
Andre

Report message to a moderator

Previous Topic:	UML2 MetaModel not applied
Next Topic:	UML class descriptions to wsdl annotations

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sat Oct 05 03:01:00 GMT 2024

.:: Contact :: Home ::.

Breadcrumbs

Sign up to our Newsletter