how to set up Eclipse & JBoss to hotswap [message #45485] |
Tue, 11 February 2003 08:18 |
Eclipse User |
|
|
|
Originally posted by: please_do_not_reply.hotmail.com
I'm using Eclipse with Tomcat (using the Tomcat plugin) and I'm curious how
to set it up to use JBoss so I can add a Session Bean to my project. With
tomcat I have tomcat use the WEB-INF directory under my project. But with
JBoss it needs to be under the JBoss directory. If I could tell JBoss that
my server directory was my project directory it'd be a piece of cake but
JBoss can't do this.
|
|
|
Re: how to set up Eclipse & JBoss to hotswap [message #45582 is a reply to message #45485] |
Tue, 11 February 2003 13:01 |
Eclipse User |
|
|
|
Originally posted by: please_do_not_reply.hotmail.com
I found the JBoss-IDE "plugin" for Eclipse and installed that. It starts
and stops the server, other than that it doesn't do much that the EASIE
plugin from Genuitec does. Now the only "problem" is that every time I
recompile an object that I deploy to JBoss, I have to run an ANT target to
copy the files to the jboss server/deploy directory. It'd be great if this
last step could be eliminated. Some ideas:
1) Make the eclipse project within the JBoss folder and set the output path
to be inside the server/deploy dir
2) Modify JBoss so that a server directory can reside outside the JBoss
hierarchy (and inside the eclipse project)
I'm curious if anyone has any ideas on this.
Michael
|
|
|
Re: how to set up Eclipse & JBoss to hotswap [message #45612 is a reply to message #45582] |
Tue, 11 February 2003 13:22 |
Eclipse User |
|
|
|
Originally posted by: sten.mindware.se
I believe you can set the project output folder to be a link to the JBoss
server/deploy folder in Eclipse 2.1 (M4).
Sten
"Michael" <please_do_not_reply@hotmail.com> skrev i meddelandet
news:b2aqng$pf5$1@rogue.oti.com...
> I found the JBoss-IDE "plugin" for Eclipse and installed that. It starts
> and stops the server, other than that it doesn't do much that the EASIE
> plugin from Genuitec does. Now the only "problem" is that every time I
> recompile an object that I deploy to JBoss, I have to run an ANT target to
> copy the files to the jboss server/deploy directory. It'd be great if
this
> last step could be eliminated. Some ideas:
>
> 1) Make the eclipse project within the JBoss folder and set the output
path
> to be inside the server/deploy dir
>
> 2) Modify JBoss so that a server directory can reside outside the JBoss
> hierarchy (and inside the eclipse project)
>
> I'm curious if anyone has any ideas on this.
>
> Michael
>
>
|
|
|
Re: how to set up Eclipse & JBoss to hotswap [message #45729 is a reply to message #45612] |
Tue, 11 February 2003 15:21 |
Eclipse User |
|
|
|
Originally posted by: please_do_not_reply.hotmail.com
You're correct, this is a new feature since Eclipse 2.0 (I believe, never
noticed it before).
I actually took the opposite approach, I downloaded a win32 app called
"junction" to make a symbolic link from the jboss/server/deploy directory to
my project/deploy directory. That way I can better manage the
configurations and stuff. So far it's working great.
"Sten Rosendahl" <sten@mindware.se> wrote in message
news:b2arvk$qdu$1@rogue.oti.com...
> I believe you can set the project output folder to be a link to the JBoss
> server/deploy folder in Eclipse 2.1 (M4).
>
> Sten
>
> "Michael" <please_do_not_reply@hotmail.com> skrev i meddelandet
> news:b2aqng$pf5$1@rogue.oti.com...
> > I found the JBoss-IDE "plugin" for Eclipse and installed that. It
starts
> > and stops the server, other than that it doesn't do much that the EASIE
> > plugin from Genuitec does. Now the only "problem" is that every time I
> > recompile an object that I deploy to JBoss, I have to run an ANT target
to
> > copy the files to the jboss server/deploy directory. It'd be great if
> this
> > last step could be eliminated. Some ideas:
> >
> > 1) Make the eclipse project within the JBoss folder and set the output
> path
> > to be inside the server/deploy dir
> >
> > 2) Modify JBoss so that a server directory can reside outside the JBoss
> > hierarchy (and inside the eclipse project)
> >
> > I'm curious if anyone has any ideas on this.
> >
> > Michael
> >
> >
>
>
|
|
|
Re: how to set up Eclipse & JBoss to hotswap [message #45759 is a reply to message #45582] |
Tue, 11 February 2003 15:58 |
Eclipse User |
|
|
|
Originally posted by: please_do_not_reply.hotmail.com
The JBoss-IDE mods to Eclipse broke the refactoring so I had to uninstall it
and go back to EASIE which works just fine. I heard that soon the JBoss-IDE
will integrate nicely with Eclipse (now it's a hack) so hopefully this
problem will go away.
"Michael" <please_do_not_reply@hotmail.com> wrote in message
news:b2aqng$pf5$1@rogue.oti.com...
> I found the JBoss-IDE "plugin" for Eclipse and installed that. It starts
> and stops the server, other than that it doesn't do much that the EASIE
> plugin from Genuitec does. Now the only "problem" is that every time I
> recompile an object that I deploy to JBoss, I have to run an ANT target to
> copy the files to the jboss server/deploy directory. It'd be great if
this
> last step could be eliminated. Some ideas:
>
> 1) Make the eclipse project within the JBoss folder and set the output
path
> to be inside the server/deploy dir
>
> 2) Modify JBoss so that a server directory can reside outside the JBoss
> hierarchy (and inside the eclipse project)
>
> I'm curious if anyone has any ideas on this.
>
> Michael
>
>
|
|
|
Re: how to set up Eclipse & JBoss to hotswap [message #46752 is a reply to message #45729] |
Fri, 21 February 2003 12:26 |
Eclipse User |
|
|
|
Originally posted by: vedsr.hotmail.com
we were using jboss and easie plug-in. it does hot deploy automatically. we
did not need to configure anything. Hot deploy work with jdk 1.4.1. Right?
It is a feature of the JVM.
"Michael" <please_do_not_reply@hotmail.com> wrote in message
news:b2b2v4$rr$1@rogue.oti.com...
> You're correct, this is a new feature since Eclipse 2.0 (I believe, never
> noticed it before).
>
> I actually took the opposite approach, I downloaded a win32 app called
> "junction" to make a symbolic link from the jboss/server/deploy directory
to
> my project/deploy directory. That way I can better manage the
> configurations and stuff. So far it's working great.
>
>
> "Sten Rosendahl" <sten@mindware.se> wrote in message
> news:b2arvk$qdu$1@rogue.oti.com...
> > I believe you can set the project output folder to be a link to the
JBoss
> > server/deploy folder in Eclipse 2.1 (M4).
> >
> > Sten
> >
> > "Michael" <please_do_not_reply@hotmail.com> skrev i meddelandet
> > news:b2aqng$pf5$1@rogue.oti.com...
> > > I found the JBoss-IDE "plugin" for Eclipse and installed that. It
> starts
> > > and stops the server, other than that it doesn't do much that the
EASIE
> > > plugin from Genuitec does. Now the only "problem" is that every time
I
> > > recompile an object that I deploy to JBoss, I have to run an ANT
target
> to
> > > copy the files to the jboss server/deploy directory. It'd be great if
> > this
> > > last step could be eliminated. Some ideas:
> > >
> > > 1) Make the eclipse project within the JBoss folder and set the output
> > path
> > > to be inside the server/deploy dir
> > >
> > > 2) Modify JBoss so that a server directory can reside outside the
JBoss
> > > hierarchy (and inside the eclipse project)
> > >
> > > I'm curious if anyone has any ideas on this.
> > >
> > > Michael
> > >
> > >
> >
> >
>
>
|
|
|
|
|
|
|
|
|
|
Powered by
FUDForum. Page generated in 0.04769 seconds