Home » Archived » Buckminster » dynamic property refs
| |
| Re: dynamic property refs [message #387955 is a reply to message #387952] |
Tue, 21 July 2009 14:39   |
 Johannes Utzig
Messages: 329
Registered: July 2009 |
Senior Member |
|
|
Hi Henrik,
comments below:
Henrik Lindberg schrieb:
> Hm,
> I don't think there is a way to use the result of a property operation
> as a property key. That would require something like:
> <bc:propertyRef> <bc:split ... > .... <bc:propertyRef />
> Or some sort of indirection function when setting the key="..."
> attribute. Neither is available.
>
Ok, that's what I thought, but I wasn't sure if I'm just missing something.
> Some ideas:
> - transform the property file to a webpage with hrefs to the files and
> use matcher to pick things
> - transform the property file to a rmap :)
Guess what, that's exactly what I did while waiting for a reply. JET
makes things like that easy :)
Only thing that doesn't work is if the path points to a directory
instead of a single file (yes, I know how ugly that is :) ). I guess I
need to write my own reader for that.
> - write a property reader type
> - modify propertyRef to allow indirection (don't know if this creates
> new problems though).
>
> - henrik
>
Best regards and thanks for the quick response,
Johannes
> Johannes Utzig wrote:
>> Hi,
>>
>> I'm currently having some issues with property expansion in my rmap.
>> What I'm trying to do is to connect a legacy system that contains
>> artifacts and resolve them with an URL reader. The artifacts are
>> published on a samba share and there is an automatically generated
>> properties file that contains paths that are relative to the project
>> that produces the artifact (the artifact name is the property key).
>> In my CSPEC(X)s I refer to these artifacts by "ProjectName/ArtifactName".
>>
>> Currently my rmap looks like this:
>> <searchPath name="MyArtifacts">
>> <provider readerType="url" componentTypes="jar">
>> <uri format="file://share/artifacts/{0}/{1}">
>> <bc:split pattern="/">
>> <bc:propertyRef key="buckminster.component" />
>> </bc:split>
>> </uri>
>> </provider>
>> </searchPath>
>>
>> Now this will result in
>> file://share/artifacts/ProjectName/ArtifactName but what I really want
>> is file://share/artifacts/ProjectName/relative/path.
>> In other words: I need to use 'ArtifactName' (which is {1} in the uri
>> format) itself as a property key that gets expanded. Is there a way to
>> do that?
>>
>> Best regards,
>> Johannes
|
|
|
| Re: dynamic property refs [message #387957 is a reply to message #387952] |
Tue, 21 July 2009 14:45 |
|
Property expansion should be recursive actually, so if something expands to something that needs expansion, that
expansion too will happen. There's a depth limit that prevents endless recursion.
- thomas
Henrik Lindberg wrote:
> Hm,
> I don't think there is a way to use the result of a property operation
> as a property key. That would require something like:
> <bc:propertyRef> <bc:split ... > .... <bc:propertyRef />
> Or some sort of indirection function when setting the key="..."
> attribute. Neither is available.
>
> Some ideas:
> - transform the property file to a webpage with hrefs to the files and
> use matcher to pick things
> - transform the property file to a rmap :)
> - write a property reader type
> - modify propertyRef to allow indirection (don't know if this creates
> new problems though).
>
> - henrik
>
> Johannes Utzig wrote:
>> Hi,
>>
>> I'm currently having some issues with property expansion in my rmap.
>> What I'm trying to do is to connect a legacy system that contains
>> artifacts and resolve them with an URL reader. The artifacts are
>> published on a samba share and there is an automatically generated
>> properties file that contains paths that are relative to the project
>> that produces the artifact (the artifact name is the property key).
>> In my CSPEC(X)s I refer to these artifacts by "ProjectName/ArtifactName".
>>
>> Currently my rmap looks like this:
>> <searchPath name="MyArtifacts">
>> <provider readerType="url" componentTypes="jar">
>> <uri format="file://share/artifacts/{0}/{1}">
>> <bc:split pattern="/">
>> <bc:propertyRef key="buckminster.component" />
>> </bc:split>
>> </uri>
>> </provider>
>> </searchPath>
>>
>> Now this will result in
>> file://share/artifacts/ProjectName/ArtifactName but what I really want
>> is file://share/artifacts/ProjectName/relative/path.
>> In other words: I need to use 'ArtifactName' (which is {1} in the uri
>> format) itself as a property key that gets expanded. Is there a way to
>> do that?
>>
>> Best regards,
>> Johannes
|
|
| | |
| Re: dynamic property refs [message #388386 is a reply to message #387964] |
Tue, 28 July 2009 15:09 |
Johannes Utzig
Messages: 329
Registered: July 2009 |
Senior Member |
|
|
Hi,
I'm sorry to bother you again, but I simply can't get this to work.
This gives me an illegal argument exception:
<searchPath name="Artifacts">
<provider readerType="url" componentTypes="jar">
<uri format="file://share/artifacts/${{0}}/">
<bc:constant value="user.language" />
</uri>
</provider>
</searchPath>
E [0039] : java.lang.IllegalArgumentException: can't parse argument
number {0}: can't parse argument number {0}
Quoting it (file://share/artifacts/$'{'{0}'}')
doesn't expand the property and leads to an URISyntaxException:
java.net.URISyntaxException: Illegal character in path at index 24:
file://share/artifacts/${user.language}/
This works however:
<uri format="file://share/artifacts/{0}/">
<bc:constant value="${user.language}" />
</uri>
This doesn't:
<uri format="file://share/artifacts/{0}/">
<bc:format format="{0}{1}{2}">
<bc:constant value="${" />
<bc:constant value="user.language" />
<bc:constant value="}" />
</bc:format>
</uri>
ERROR java.net.URISyntaxException: Illegal character in path at
index 24: file://share/artifacts/${user.language}/
(using user.language doesn't make much sense of course, in my real case
I use buckminster.component. user.language just makes the example self
contained without a bunch of properties for every buckminster.component
in the query).
So, I'm really out of ideas on how this is supposed to work. It's great
that properties get expanded like that, but I just don't understand how
I can use the value of buckminster.component in the key for a property
that will actually get expanded.
Best regards,
Johannes
Johannes Utzig schrieb:
> Oh wow, I didn't know that would work. I thought only the
> Message-Format patterns {n} would be allowed in uri element.
>
> Thanks a lot I will try that tomorrow
>
> Best regards,
> Johannes
>
> Henrik Lindberg schrieb:
>> Thomas explained this to me as well - if a value contains
>> "${property}" it will be expanded. So all that is needed should be:
>> <uri format="file://share/artifacts/{0}/${{1}}">
>>
>> i.e. use {1} as the name of a property.
>>
>> - henrik
>>
>> Thomas Hallgren wrote:
>>> Property expansion should be recursive actually, so if something
>>> expands to something that needs expansion, that expansion too will
>>> happen. There's a depth limit that prevents endless recursion.
>>>
>>> - thomas
>>>
>>> Henrik Lindberg wrote:
>>>> Hm,
>>>> I don't think there is a way to use the result of a property
>>>> operation as a property key. That would require something like:
>>>> <bc:propertyRef> <bc:split ... > .... <bc:propertyRef />
>>>> Or some sort of indirection function when setting the key="..."
>>>> attribute. Neither is available.
>>>>
>>>> Some ideas:
>>>> - transform the property file to a webpage with hrefs to the files
>>>> and use matcher to pick things
>>>> - transform the property file to a rmap :)
>>>> - write a property reader type
>>>> - modify propertyRef to allow indirection (don't know if this
>>>> creates new problems though).
>>>>
>>>> - henrik
>>>>
>>>> Johannes Utzig wrote:
>>>>> Hi,
>>>>>
>>>>> I'm currently having some issues with property expansion in my
>>>>> rmap. What I'm trying to do is to connect a legacy system that
>>>>> contains artifacts and resolve them with an URL reader. The
>>>>> artifacts are published on a samba share and there is an
>>>>> automatically generated properties file that contains paths that
>>>>> are relative to the project that produces the artifact (the
>>>>> artifact name is the property key).
>>>>> In my CSPEC(X)s I refer to these artifacts by
>>>>> "ProjectName/ArtifactName".
>>>>>
>>>>> Currently my rmap looks like this:
>>>>> <searchPath name="MyArtifacts">
>>>>> <provider readerType="url" componentTypes="jar">
>>>>> <uri format="file://share/artifacts/{0}/{1}">
>>>>> <bc:split pattern="/">
>>>>> <bc:propertyRef key="buckminster.component" />
>>>>> </bc:split>
>>>>> </uri>
>>>>> </provider>
>>>>> </searchPath>
>>>>>
>>>>> Now this will result in
>>>>> file://share/artifacts/ProjectName/ArtifactName but what I really
>>>>> want is file://share/artifacts/ProjectName/relative/path.
>>>>> In other words: I need to use 'ArtifactName' (which is {1} in the
>>>>> uri format) itself as a property key that gets expanded. Is there a
>>>>> way to do that?
>>>>>
>>>>> Best regards,
>>>>> Johannes
|
|
| |
| Re: dynamic property refs [message #388394 is a reply to message #388389] |
Tue, 28 July 2009 19:56 |
Johannes Utzig
Messages: 329
Registered: July 2009 |
Senior Member |
|
|
Hi Henrik,
this works of course, but it's not solving my problem. In this setup,
${user.language} will be expanded to its value and that will be used as
a key, but I need buckminster.component to be expanded and use that to
build a new property key and that's what doesn't seem to work (that's
why I introduced the constants in the example, because if it would work
with a constant, it would probably also work with buckminster.component
+ propertyRef).
Maybe you have another idea, I'm out of them :)
Best regards and thank you,
Johannes
Henrik Lindberg schrieb:
> Hm,
> I can see why the ${{0}} does not work... the {0} is expanded last (duh
> - I should not have suggested that in the first place...)
>
> Here is another attempt:
> <uri format="file://share/artifacts/{0}" >
> <bc:propertyRef key="${user.language}" />
> </uri>
>
> - henrik
>
> Johannes Utzig wrote:
>> Hi,
>>
>> I'm sorry to bother you again, but I simply can't get this to work.
>> This gives me an illegal argument exception:
>> <searchPath name="Artifacts">
>> <provider readerType="url" componentTypes="jar">
>> <uri format="file://share/artifacts/${{0}}/">
>> <bc:constant value="user.language" />
>> </uri>
>> </provider>
>> </searchPath>
>> E [0039] : java.lang.IllegalArgumentException: can't parse argument
>> number {0}: can't parse argument number {0}
>>
>> Quoting it (file://share/artifacts/$'{'{0}'}')
>> doesn't expand the property and leads to an URISyntaxException:
>> java.net.URISyntaxException: Illegal character in path at index 24:
>> file://share/artifacts/${user.language}/
>>
>> This works however:
>> <uri format="file://share/artifacts/{0}/">
>> <bc:constant value="${user.language}" />
>> </uri>
>>
>> This doesn't:
>> <uri format="file://share/artifacts/{0}/">
>> <bc:format format="{0}{1}{2}">
>> <bc:constant value="${" />
>> <bc:constant value="user.language" />
>> <bc:constant value="}" />
>> </bc:format> </uri>
>> ERROR java.net.URISyntaxException: Illegal character in path
>> at index 24: file://share/artifacts/${user.language}/
>>
>> (using user.language doesn't make much sense of course, in my real
>> case I use buckminster.component. user.language just makes the example
>> self contained without a bunch of properties for every
>> buckminster.component in the query).
>>
>> So, I'm really out of ideas on how this is supposed to work. It's
>> great that properties get expanded like that, but I just don't
>> understand how I can use the value of buckminster.component in the key
>> for a property that will actually get expanded.
>>
>> Best regards,
>> Johannes
>>
>>
>>
|
|
|
| Re: dynamic property refs [message #388395 is a reply to message #388394] |
Tue, 28 July 2009 21:19 |
|
Hi Johannes,
I'm not sure what it is you are trying to do here:
<constant value="${buckminster.component}"/>
is exactly the same as
<propertyRef key="buckminster.component"/>
but
<propertyRef key="${buckminster.component}"/>
will give you the value of a property with a key that corresponds to the component name. If you want to add things to
that, you can of course do:
<propertyRef key="${buckminster.component}.foo.bar"/>
So what use-case is it that isn't covered?
Regards,
Thomas Hallgren
Johannes Utzig wrote:
> Hi Henrik,
>
> this works of course, but it's not solving my problem. In this setup,
> ${user.language} will be expanded to its value and that will be used as
> a key, but I need buckminster.component to be expanded and use that to
> build a new property key and that's what doesn't seem to work (that's
> why I introduced the constants in the example, because if it would work
> with a constant, it would probably also work with buckminster.component
> + propertyRef).
>
>
> Maybe you have another idea, I'm out of them :)
>
> Best regards and thank you,
> Johannes
>
> Henrik Lindberg schrieb:
>> Hm,
>> I can see why the ${{0}} does not work... the {0} is expanded last
>> (duh - I should not have suggested that in the first place...)
>>
>> Here is another attempt:
>> <uri format="file://share/artifacts/{0}" >
>> <bc:propertyRef key="${user.language}" />
>> </uri>
>>
>> - henrik
>>
>> Johannes Utzig wrote:
>>> Hi,
>>>
>>> I'm sorry to bother you again, but I simply can't get this to work.
>>> This gives me an illegal argument exception:
>>> <searchPath name="Artifacts">
>>> <provider readerType="url" componentTypes="jar">
>>> <uri format="file://share/artifacts/${{0}}/">
>>> <bc:constant value="user.language" />
>>> </uri>
>>> </provider>
>>> </searchPath>
>>> E [0039] : java.lang.IllegalArgumentException: can't parse argument
>>> number {0}: can't parse argument number {0}
>>>
>>> Quoting it (file://share/artifacts/$'{'{0}'}')
>>> doesn't expand the property and leads to an URISyntaxException:
>>> java.net.URISyntaxException: Illegal character in path at index 24:
>>> file://share/artifacts/${user.language}/
>>>
>>> This works however:
>>> <uri format="file://share/artifacts/{0}/">
>>> <bc:constant value="${user.language}" />
>>> </uri>
>>>
>>> This doesn't:
>>> <uri format="file://share/artifacts/{0}/">
>>> <bc:format format="{0}{1}{2}">
>>> <bc:constant value="${" />
>>> <bc:constant value="user.language" />
>>> <bc:constant value="}" />
>>> </bc:format> </uri>
>>> ERROR java.net.URISyntaxException: Illegal character in path
>>> at index 24: file://share/artifacts/${user.language}/
>>>
>>> (using user.language doesn't make much sense of course, in my real
>>> case I use buckminster.component. user.language just makes the
>>> example self contained without a bunch of properties for every
>>> buckminster.component in the query).
>>>
>>> So, I'm really out of ideas on how this is supposed to work. It's
>>> great that properties get expanded like that, but I just don't
>>> understand how I can use the value of buckminster.component in the
>>> key for a property that will actually get expanded.
>>>
>>> Best regards,
>>> Johannes
>>>
>>>
>>>
|
|
|
| Re: dynamic property refs [message #388397 is a reply to message #388395] |
Wed, 29 July 2009 07:29 |
Johannes Utzig
Messages: 329
Registered: July 2009 |
Senior Member |
|
|
Hi Thomas,
the thing that I can't seem to get to work is this:
A property of the name artifact.ARTIFACTNAME.path has a value that is
the relative path to the artifact from the project that produced it. Now
to use buckminster for the resolution I need three pieces of information:
-the name of the artifact
-the name of the project that produced the artifact
-the property value of artifact.ARTIFACTNAME.path
The parent/child hierarchie seemed close enough to me to Maven + Parent
poms, so I decided to encode the information about the parent project
the same way:
projectName/artifactName is my component name.
Now to look up the relative path I need to split buckminster.component
and use the artifact name as a property key but I can't get it to work.
This is how it currently looks like. It's obvious why it doesn't work,
the 'format' creates a string artifact.artifactName.path, not a
property, but how would I treat it as a property?
<searchPath name="Artifacts">
<provider readerType="url" componentTypes="jar">
<!-- the artifact will be in
//share/artifacts/projectName/${artifact.artifactName.path} -->
<uri format="file://share/artifacts/{1}/{0}">
<bc:format format="artifact.{1}.path" >
<bc:split pattern="/">
<bc:propertyRef key="buckminster.component" />
</bc:split>
</bc:format>
<bc:split pattern="/">
<bc:propertyRef key="buckminster.component" />
</bc:split>
</uri>
</provider>
</searchPath>
I think what I'd need now is a propertyRef that alows the value of a
nested child element to be the key, then I could resolve my property.
But maybe I'm just missing the obvious here...
Best regards,
Johannes
Thomas Hallgren schrieb:
> Hi Johannes,
> I'm not sure what it is you are trying to do here:
>
> <constant value="${buckminster.component}"/>
>
> is exactly the same as
>
> <propertyRef key="buckminster.component"/>
>
> but
>
> <propertyRef key="${buckminster.component}"/>
>
> will give you the value of a property with a key that corresponds to the
> component name. If you want to add things to that, you can of course do:
>
> <propertyRef key="${buckminster.component}.foo.bar"/>
>
> So what use-case is it that isn't covered?
>
> Regards,
> Thomas Hallgren
>
>
> Johannes Utzig wrote:
>> Hi Henrik,
>>
>> this works of course, but it's not solving my problem. In this setup,
>> ${user.language} will be expanded to its value and that will be used
>> as a key, but I need buckminster.component to be expanded and use that
>> to build a new property key and that's what doesn't seem to work
>> (that's why I introduced the constants in the example, because if it
>> would work with a constant, it would probably also work with
>> buckminster.component + propertyRef).
>>
>>
>> Maybe you have another idea, I'm out of them :)
>>
>
>
>> Best regards and thank you,
>> Johannes
>>
>> Henrik Lindberg schrieb:
>>> Hm,
>>> I can see why the ${{0}} does not work... the {0} is expanded last
>>> (duh - I should not have suggested that in the first place...)
>>>
>>> Here is another attempt:
>>> <uri format="file://share/artifacts/{0}" >
>>> <bc:propertyRef key="${user.language}" />
>>> </uri>
>>>
>>> - henrik
>>>
>>> Johannes Utzig wrote:
>>>> Hi,
>>>>
>>>> I'm sorry to bother you again, but I simply can't get this to work.
>>>> This gives me an illegal argument exception:
>>>> <searchPath name="Artifacts">
>>>> <provider readerType="url" componentTypes="jar">
>>>> <uri format="file://share/artifacts/${{0}}/">
>>>> <bc:constant value="user.language" />
>>>> </uri>
>>>> </provider>
>>>> </searchPath>
>>>> E [0039] : java.lang.IllegalArgumentException: can't parse argument
>>>> number {0}: can't parse argument number {0}
>>>>
>>>> Quoting it (file://share/artifacts/$'{'{0}'}')
>>>> doesn't expand the property and leads to an URISyntaxException:
>>>> java.net.URISyntaxException: Illegal character in path at index 24:
>>>> file://share/artifacts/${user.language}/
>>>>
>>>> This works however:
>>>> <uri format="file://share/artifacts/{0}/">
>>>> <bc:constant value="${user.language}" />
>>>> </uri>
>>>>
>>>> This doesn't:
>>>> <uri format="file://share/artifacts/{0}/">
>>>> <bc:format format="{0}{1}{2}">
>>>> <bc:constant value="${" />
>>>> <bc:constant value="user.language" />
>>>> <bc:constant value="}" />
>>>> </bc:format> </uri>
>>>> ERROR java.net.URISyntaxException: Illegal character in path
>>>> at index 24: file://share/artifacts/${user.language}/
>>>>
>>>> (using user.language doesn't make much sense of course, in my real
>>>> case I use buckminster.component. user.language just makes the
>>>> example self contained without a bunch of properties for every
>>>> buckminster.component in the query).
>>>>
>>>> So, I'm really out of ideas on how this is supposed to work. It's
>>>> great that properties get expanded like that, but I just don't
>>>> understand how I can use the value of buckminster.component in the
>>>> key for a property that will actually get expanded.
>>>>
>>>> Best regards,
>>>> Johannes
>>>>
>>>>
>>>>
|
|
|
| Re: dynamic property refs [message #388400 is a reply to message #388397] |
Wed, 29 July 2009 08:05 |
|
Johannes Utzig wrote:
> Hi Thomas,
>
> the thing that I can't seem to get to work is this:
> A property of the name artifact.ARTIFACTNAME.path has a value that is
> the relative path to the artifact from the project that produced it. Now
> to use buckminster for the resolution I need three pieces of information:
> -the name of the artifact
> -the name of the project that produced the artifact
> -the property value of artifact.ARTIFACTNAME.path
>
> The parent/child hierarchie seemed close enough to me to Maven + Parent
> poms, so I decided to encode the information about the parent project
> the same way:
> projectName/artifactName is my component name.
>
> Now to look up the relative path I need to split buckminster.component
> and use the artifact name as a property key but I can't get it to work.
> This is how it currently looks like. It's obvious why it doesn't work,
> the 'format' creates a string artifact.artifactName.path, not a
> property, but how would I treat it as a property?
>
Aha, you need to make part of a property a key for another property. Well, you can do that too :-). You need to use a
propertyElement to declare a new property. You can define new properties on the RMAP top level.
<propertyElement key="artifact.name">
<bc:format format="{1}" >
<bc:split pattern="/">
<bc:propertyRef key="buckminster.component" />
</bc:split>
</bc:format>
</propertyElement>
That defines the new artifact.name property. In the provider uri element you should then be able to do:
<bc:propertyRef key="artifact.${artifact.name}.path"/>
HTH,
Thomas Hallgren
>
> <searchPath name="Artifacts">
> <provider readerType="url" componentTypes="jar">
> <!-- the artifact will be in
> //share/artifacts/projectName/${artifact.artifactName.path} -->
> <uri format="file://share/artifacts/{1}/{0}">
> <bc:format format="artifact.{1}.path" >
> <bc:split pattern="/">
> <bc:propertyRef key="buckminster.component" />
> </bc:split>
> </bc:format>
> <bc:split pattern="/">
> <bc:propertyRef key="buckminster.component" />
> </bc:split>
> </uri>
> </provider>
> </searchPath>
>
> I think what I'd need now is a propertyRef that alows the value of a
> nested child element to be the key, then I could resolve my property.
> But maybe I'm just missing the obvious here...
>
> Best regards,
> Johannes
>
> Thomas Hallgren schrieb:
>> Hi Johannes,
>> I'm not sure what it is you are trying to do here:
>>
>> <constant value="${buckminster.component}"/>
>>
>> is exactly the same as
>>
>> <propertyRef key="buckminster.component"/>
>>
>> but
>>
>> <propertyRef key="${buckminster.component}"/>
>>
>> will give you the value of a property with a key that corresponds to
>> the component name. If you want to add things to that, you can of
>> course do:
>>
>> <propertyRef key="${buckminster.component}.foo.bar"/>
>>
>> So what use-case is it that isn't covered?
>>
>> Regards,
>> Thomas Hallgren
>>
>>
>> Johannes Utzig wrote:
>>> Hi Henrik,
>>>
>>> this works of course, but it's not solving my problem. In this setup,
>>> ${user.language} will be expanded to its value and that will be used
>>> as a key, but I need buckminster.component to be expanded and use
>>> that to build a new property key and that's what doesn't seem to work
>>> (that's why I introduced the constants in the example, because if it
>>> would work with a constant, it would probably also work with
>>> buckminster.component + propertyRef).
>>>
>>>
>>> Maybe you have another idea, I'm out of them :)
>>>
>>
>>
>>> Best regards and thank you,
>>> Johannes
>>>
>>> Henrik Lindberg schrieb:
>>>> Hm,
>>>> I can see why the ${{0}} does not work... the {0} is expanded last
>>>> (duh - I should not have suggested that in the first place...)
>>>>
>>>> Here is another attempt:
>>>> <uri format="file://share/artifacts/{0}" >
>>>> <bc:propertyRef key="${user.language}" />
>>>> </uri>
>>>>
>>>> - henrik
>>>>
>>>> Johannes Utzig wrote:
>>>>> Hi,
>>>>>
>>>>> I'm sorry to bother you again, but I simply can't get this to work.
>>>>> This gives me an illegal argument exception:
>>>>> <searchPath name="Artifacts">
>>>>> <provider readerType="url" componentTypes="jar">
>>>>> <uri format="file://share/artifacts/${{0}}/">
>>>>> <bc:constant value="user.language" />
>>>>> </uri>
>>>>> </provider>
>>>>> </searchPath>
>>>>> E [0039] : java.lang.IllegalArgumentException: can't parse argument
>>>>> number {0}: can't parse argument number {0}
>>>>>
>>>>> Quoting it (file://share/artifacts/$'{'{0}'}')
>>>>> doesn't expand the property and leads to an URISyntaxException:
>>>>> java.net.URISyntaxException: Illegal character in path at index 24:
>>>>> file://share/artifacts/${user.language}/
>>>>>
>>>>> This works however:
>>>>> <uri format="file://share/artifacts/{0}/">
>>>>> <bc:constant value="${user.language}" />
>>>>> </uri>
>>>>>
>>>>> This doesn't:
>>>>> <uri format="file://share/artifacts/{0}/">
>>>>> <bc:format format="{0}{1}{2}">
>>>>> <bc:constant value="${" />
>>>>> <bc:constant value="user.language" />
>>>>> <bc:constant value="}" />
>>>>> </bc:format> </uri>
>>>>> ERROR java.net.URISyntaxException: Illegal character in
>>>>> path at index 24: file://share/artifacts/${user.language}/
>>>>>
>>>>> (using user.language doesn't make much sense of course, in my real
>>>>> case I use buckminster.component. user.language just makes the
>>>>> example self contained without a bunch of properties for every
>>>>> buckminster.component in the query).
>>>>>
>>>>> So, I'm really out of ideas on how this is supposed to work. It's
>>>>> great that properties get expanded like that, but I just don't
>>>>> understand how I can use the value of buckminster.component in the
>>>>> key for a property that will actually get expanded.
>>>>>
>>>>> Best regards,
>>>>> Johannes
>>>>>
>>>>>
>>>>>
|
|
|
| Re: dynamic property refs [message #388401 is a reply to message #388400] |
Wed, 29 July 2009 08:30 |
Johannes Utzig
Messages: 329
Registered: July 2009 |
Senior Member |
|
|
Thank you so much Thomas, this looks exactly like what I need.
Unfortunately it gives me a NullPointerException without any stacktrace
or message:
ProjectName/ArtifactName:jar: Using resource map
http://somehost.de/some.rmap
ERROR [0001] : java.lang.NullPointerException
Errors and Warnings
E [0001] : java.lang.NullPointerException: java.lang.NullPointerException
The NPE no longer occurs if I remove the split and format in the
property element:
<propertyElement key="artifact.name">
<bc:propertyRef key="buckminster.component" />
</propertyElement>
Now the error is this:
The property ${ artifact.${artifact.name}.path } has not been set and
will default to null
So it looks like the propertyElement does not properly expand
buckminster.component?
Best regards,
Johannes
Thomas Hallgren schrieb:
> Johannes Utzig wrote:
>> Hi Thomas,
>>
>> the thing that I can't seem to get to work is this:
>> A property of the name artifact.ARTIFACTNAME.path has a value that is
>> the relative path to the artifact from the project that produced it.
>> Now to use buckminster for the resolution I need three pieces of
>> information:
>> -the name of the artifact
>> -the name of the project that produced the artifact
>> -the property value of artifact.ARTIFACTNAME.path
>>
>> The parent/child hierarchie seemed close enough to me to Maven +
>> Parent poms, so I decided to encode the information about the parent
>> project the same way:
>> projectName/artifactName is my component name.
>>
>> Now to look up the relative path I need to split buckminster.component
>> and use the artifact name as a property key but I can't get it to work.
>> This is how it currently looks like. It's obvious why it doesn't work,
>> the 'format' creates a string artifact.artifactName.path, not a
>> property, but how would I treat it as a property?
>>
> Aha, you need to make part of a property a key for another property.
> Well, you can do that too :-). You need to use a propertyElement to
> declare a new property. You can define new properties on the RMAP top
> level.
>
> <propertyElement key="artifact.name">
> <bc:format format="{1}" >
> <bc:split pattern="/">
> <bc:propertyRef key="buckminster.component" />
> </bc:split>
> </bc:format>
> </propertyElement>
>
> That defines the new artifact.name property. In the provider uri element
> you should then be able to do:
>
> <bc:propertyRef key="artifact.${artifact.name}.path"/>
>
> HTH,
> Thomas Hallgren
>
>
>>
>> <searchPath name="Artifacts">
>> <provider readerType="url" componentTypes="jar">
>> <!-- the artifact will be in
>> //share/artifacts/projectName/${artifact.artifactName.path} -->
>> <uri format="file://share/artifacts/{1}/{0}">
>> <bc:format format="artifact.{1}.path" >
>> <bc:split pattern="/">
>> <bc:propertyRef key="buckminster.component" />
>> </bc:split>
>> </bc:format>
>> <bc:split pattern="/">
>> <bc:propertyRef key="buckminster.component" />
>> </bc:split> </uri>
>> </provider>
>> </searchPath>
>>
>> I think what I'd need now is a propertyRef that alows the value of a
>> nested child element to be the key, then I could resolve my property.
>> But maybe I'm just missing the obvious here...
>>
>> Best regards,
>> Johannes
>>
>> Thomas Hallgren schrieb:
>>> Hi Johannes,
>>> I'm not sure what it is you are trying to do here:
>>>
>>> <constant value="${buckminster.component}"/>
>>>
>>> is exactly the same as
>>>
>>> <propertyRef key="buckminster.component"/>
>>>
>>> but
>>>
>>> <propertyRef key="${buckminster.component}"/>
>>>
>>> will give you the value of a property with a key that corresponds to
>>> the component name. If you want to add things to that, you can of
>>> course do:
>>>
>>> <propertyRef key="${buckminster.component}.foo.bar"/>
>>>
>>> So what use-case is it that isn't covered?
>>>
>>> Regards,
>>> Thomas Hallgren
>>>
>>>
>>> Johannes Utzig wrote:
>>>> Hi Henrik,
>>>>
>>>> this works of course, but it's not solving my problem. In this
>>>> setup, ${user.language} will be expanded to its value and that will
>>>> be used as a key, but I need buckminster.component to be expanded
>>>> and use that to build a new property key and that's what doesn't
>>>> seem to work (that's why I introduced the constants in the example,
>>>> because if it would work with a constant, it would probably also
>>>> work with buckminster.component + propertyRef).
>>>>
>>>>
>>>> Maybe you have another idea, I'm out of them :)
>>>>
>>>
>>>
>>>> Best regards and thank you,
>>>> Johannes
>>>>
>>>> Henrik Lindberg schrieb:
>>>>> Hm,
>>>>> I can see why the ${{0}} does not work... the {0} is expanded last
>>>>> (duh - I should not have suggested that in the first place...)
>>>>>
>>>>> Here is another attempt:
>>>>> <uri format="file://share/artifacts/{0}" >
>>>>> <bc:propertyRef key="${user.language}" />
>>>>> </uri>
>>>>>
>>>>> - henrik
>>>>>
>>>>> Johannes Utzig wrote:
>>>>>> Hi,
>>>>>>
>>>>>> I'm sorry to bother you again, but I simply can't get this to work.
>>>>>> This gives me an illegal argument exception:
>>>>>> <searchPath name="Artifacts">
>>>>>> <provider readerType="url" componentTypes="jar">
>>>>>> <uri format="file://share/artifacts/${{0}}/">
>>>>>> <bc:constant value="user.language" />
>>>>>> </uri>
>>>>>> </provider>
>>>>>> </searchPath>
>>>>>> E [0039] : java.lang.IllegalArgumentException: can't parse
>>>>>> argument number {0}: can't parse argument number {0}
>>>>>>
>>>>>> Quoting it (file://share/artifacts/$'{'{0}'}')
>>>>>> doesn't expand the property and leads to an URISyntaxException:
>>>>>> java.net.URISyntaxException: Illegal character in path at index
>>>>>> 24: file://share/artifacts/${user.language}/
>>>>>>
>>>>>> This works however:
>>>>>> <uri format="file://share/artifacts/{0}/">
>>>>>> <bc:constant value="${user.language}" />
>>>>>> </uri>
>>>>>>
>>>>>> This doesn't:
>>>>>> <uri format="file://share/artifacts/{0}/">
>>>>>> <bc:format format="{0}{1}{2}">
>>>>>> <bc:constant value="${" />
>>>>>> <bc:constant value="user.language" />
>>>>>> <bc:constant value="}" />
>>>>>> </bc:format> </uri>
>>>>>> ERROR java.net.URISyntaxException: Illegal character in
>>>>>> path at index 24: file://share/artifacts/${user.language}/
>>>>>>
>>>>>> (using user.language doesn't make much sense of course, in my real
>>>>>> case I use buckminster.component. user.language just makes the
>>>>>> example self contained without a bunch of properties for every
>>>>>> buckminster.component in the query).
>>>>>>
>>>>>> So, I'm really out of ideas on how this is supposed to work. It's
>>>>>> great that properties get expanded like that, but I just don't
>>>>>> understand how I can use the value of buckminster.component in the
>>>>>> key for a property that will actually get expanded.
>>>>>>
>>>>>> Best regards,
>>>>>> Johannes
>>>>>>
>>>>>>
>>>>>>
|
|
|
| Re: dynamic property refs [message #388463 is a reply to message #388401] |
Wed, 29 July 2009 08:40 |
|
Does your <workspace>/.metadata/.log reveal anything?
- thomas
Johannes Utzig wrote:
> Thank you so much Thomas, this looks exactly like what I need.
> Unfortunately it gives me a NullPointerException without any stacktrace
> or message:
> ProjectName/ArtifactName:jar: Using resource map
> http://somehost.de/some.rmap
> ERROR [0001] : java.lang.NullPointerException
> Errors and Warnings
> E [0001] : java.lang.NullPointerException: java.lang.NullPointerException
>
> The NPE no longer occurs if I remove the split and format in the
> property element:
> <propertyElement key="artifact.name">
> <bc:propertyRef key="buckminster.component" />
> </propertyElement>
>
> Now the error is this:
> The property ${ artifact.${artifact.name}.path } has not been set and
> will default to null
>
> So it looks like the propertyElement does not properly expand
> buckminster.component?
>
> Best regards,
> Johannes
>
> Thomas Hallgren schrieb:
>> Johannes Utzig wrote:
>>> Hi Thomas,
>>>
>>> the thing that I can't seem to get to work is this:
>>> A property of the name artifact.ARTIFACTNAME.path has a value that
>>> is the relative path to the artifact from the project that produced
>>> it. Now to use buckminster for the resolution I need three pieces of
>>> information:
>>> -the name of the artifact
>>> -the name of the project that produced the artifact
>>> -the property value of artifact.ARTIFACTNAME.path
>>>
>>> The parent/child hierarchie seemed close enough to me to Maven +
>>> Parent poms, so I decided to encode the information about the parent
>>> project the same way:
>>> projectName/artifactName is my component name.
>>>
>>> Now to look up the relative path I need to split
>>> buckminster.component and use the artifact name as a property key but
>>> I can't get it to work.
>>> This is how it currently looks like. It's obvious why it doesn't
>>> work, the 'format' creates a string artifact.artifactName.path, not a
>>> property, but how would I treat it as a property?
>>>
>> Aha, you need to make part of a property a key for another property.
>> Well, you can do that too :-). You need to use a propertyElement to
>> declare a new property. You can define new properties on the RMAP top
>> level.
>>
>> <propertyElement key="artifact.name">
>> <bc:format format="{1}" >
>> <bc:split pattern="/">
>> <bc:propertyRef key="buckminster.component" />
>> </bc:split>
>> </bc:format>
>> </propertyElement>
>>
>> That defines the new artifact.name property. In the provider uri
>> element you should then be able to do:
>>
>> <bc:propertyRef key="artifact.${artifact.name}.path"/>
>>
>> HTH,
>> Thomas Hallgren
>>
>>
>>>
>>> <searchPath name="Artifacts">
>>> <provider readerType="url" componentTypes="jar">
>>> <!-- the artifact will be in
>>> //share/artifacts/projectName/${artifact.artifactName.path} -->
>>> <uri format="file://share/artifacts/{1}/{0}">
>>> <bc:format format="artifact.{1}.path" >
>>> <bc:split pattern="/">
>>> <bc:propertyRef key="buckminster.component" />
>>> </bc:split>
>>> </bc:format>
>>> <bc:split pattern="/">
>>> <bc:propertyRef key="buckminster.component" />
>>> </bc:split> </uri>
>>> </provider>
>>> </searchPath>
>>>
>>> I think what I'd need now is a propertyRef that alows the value of a
>>> nested child element to be the key, then I could resolve my property.
>>> But maybe I'm just missing the obvious here...
>>>
>>> Best regards,
>>> Johannes
>>>
>>> Thomas Hallgren schrieb:
>>>> Hi Johannes,
>>>> I'm not sure what it is you are trying to do here:
>>>>
>>>> <constant value="${buckminster.component}"/>
>>>>
>>>> is exactly the same as
>>>>
>>>> <propertyRef key="buckminster.component"/>
>>>>
>>>> but
>>>>
>>>> <propertyRef key="${buckminster.component}"/>
>>>>
>>>> will give you the value of a property with a key that corresponds to
>>>> the component name. If you want to add things to that, you can of
>>>> course do:
>>>>
>>>> <propertyRef key="${buckminster.component}.foo.bar"/>
>>>>
>>>> So what use-case is it that isn't covered?
>>>>
>>>> Regards,
>>>> Thomas Hallgren
>>>>
>>>>
>>>> Johannes Utzig wrote:
>>>>> Hi Henrik,
>>>>>
>>>>> this works of course, but it's not solving my problem. In this
>>>>> setup, ${user.language} will be expanded to its value and that will
>>>>> be used as a key, but I need buckminster.component to be expanded
>>>>> and use that to build a new property key and that's what doesn't
>>>>> seem to work (that's why I introduced the constants in the example,
>>>>> because if it would work with a constant, it would probably also
>>>>> work with buckminster.component + propertyRef).
>>>>>
>>>>>
>>>>> Maybe you have another idea, I'm out of them :)
>>>>>
>>>>
>>>>
>>>>> Best regards and thank you,
>>>>> Johannes
>>>>>
>>>>> Henrik Lindberg schrieb:
>>>>>> Hm,
>>>>>> I can see why the ${{0}} does not work... the {0} is expanded last
>>>>>> (duh - I should not have suggested that in the first place...)
>>>>>>
>>>>>> Here is another attempt:
>>>>>> <uri format="file://share/artifacts/{0}" >
>>>>>> <bc:propertyRef key="${user.language}" />
>>>>>> </uri>
>>>>>>
>>>>>> - henrik
>>>>>>
>>>>>> Johannes Utzig wrote:
>>>>>>> Hi,
>>>>>>>
>>>>>>> I'm sorry to bother you again, but I simply can't get this to work.
>>>>>>> This gives me an illegal argument exception:
>>>>>>> <searchPath name="Artifacts">
>>>>>>> <provider readerType="url" componentTypes="jar">
>>>>>>> <uri format="file://share/artifacts/${{0}}/">
>>>>>>> <bc:constant value="user.language" />
>>>>>>> </uri>
>>>>>>> </provider>
>>>>>>> </searchPath>
>>>>>>> E [0039] : java.lang.IllegalArgumentException: can't parse
>>>>>>> argument number {0}: can't parse argument number {0}
>>>>>>>
>>>>>>> Quoting it (file://share/artifacts/$'{'{0}'}')
>>>>>>> doesn't expand the property and leads to an URISyntaxException:
>>>>>>> java.net.URISyntaxException: Illegal character in path at index
>>>>>>> 24: file://share/artifacts/${user.language}/
>>>>>>>
>>>>>>> This works however:
>>>>>>> <uri format="file://share/artifacts/{0}/">
>>>>>>> <bc:constant value="${user.language}" />
>>>>>>> </uri>
>>>>>>>
>>>>>>> This doesn't:
>>>>>>> <uri format="file://share/artifacts/{0}/">
>>>>>>> <bc:format format="{0}{1}{2}">
>>>>>>> <bc:constant value="${" />
>>>>>>> <bc:constant value="user.language" />
>>>>>>> <bc:constant value="}" />
>>>>>>> </bc:format> </uri>
>>>>>>> ERROR java.net.URISyntaxException: Illegal character in
>>>>>>> path at index 24: file://share/artifacts/${user.language}/
>>>>>>>
>>>>>>> (using user.language doesn't make much sense of course, in my
>>>>>>> real case I use buckminster.component. user.language just makes
>>>>>>> the example self contained without a bunch of properties for
>>>>>>> every buckminster.component in the query).
>>>>>>>
>>>>>>> So, I'm really out of ideas on how this is supposed to work. It's
>>>>>>> great that properties get expanded like that, but I just don't
>>>>>>> understand how I can use the value of buckminster.component in
>>>>>>> the key for a property that will actually get expanded.
>>>>>>>
>>>>>>> Best regards,
>>>>>>> Johannes
>>>>>>>
>>>>>>>
>>>>>>>
|
|
|
| Re: dynamic property refs [message #388465 is a reply to message #388401] |
Wed, 29 July 2009 08:42 |
|
Another question.
Johannes Utzig wrote:
> Now the error is this:
> The property ${ artifact.${artifact.name}.path } has not been set and
> will default to null
>
It looks like you have spaces in that property key. Did you add them for clarity here or are they present in your
declaration?
- thomas
|
|
|
| Re: dynamic property refs [message #388468 is a reply to message #388463] |
Wed, 29 July 2009 08:44 |
Johannes Utzig
Messages: 329
Registered: July 2009 |
Senior Member |
|
|
No, I checked that too, no more information:
!ENTRY org.eclipse.buckminster.core 4 293 2009-07-29 10:24:26.312
!MESSAGE Errors and Warnings
!ENTRY org.eclipse.buckminster.core 4 293 2009-07-29 10:24:26.312
!MESSAGE E [0001] : java.lang.NullPointerException:
java.lang.NullPointerException
!ENTRY org.eclipse.buckminster.core 2 293 2009-07-29 10:26:12.921
!MESSAGE The property ${ artifact.${artifact.name}.path } has not been
set and will default to null
I also set the buckminster log level to debug but I'm not getting any
additional information.
Thomas Hallgren schrieb:
> Does your <workspace>/.metadata/.log reveal anything?
>
> - thomas
>
> Johannes Utzig wrote:
>> Thank you so much Thomas, this looks exactly like what I need.
>> Unfortunately it gives me a NullPointerException without any
>> stacktrace or message:
>> ProjectName/ArtifactName:jar: Using resource map
>> http://somehost.de/some.rmap
>> ERROR [0001] : java.lang.NullPointerException
>> Errors and Warnings
>> E [0001] : java.lang.NullPointerException: java.lang.NullPointerException
>>
>> The NPE no longer occurs if I remove the split and format in the
>> property element:
>> <propertyElement key="artifact.name">
>> <bc:propertyRef key="buckminster.component" />
>> </propertyElement>
>>
>> Now the error is this:
>> The property ${ artifact.${artifact.name}.path } has not been set and
>> will default to null
>>
>> So it looks like the propertyElement does not properly expand
>> buckminster.component?
>>
>> Best regards,
>> Johannes
>>
>> Thomas Hallgren schrieb:
>>> Johannes Utzig wrote:
>>>> Hi Thomas,
>>>>
>>>> the thing that I can't seem to get to work is this:
>>>> A property of the name artifact.ARTIFACTNAME.path has a value that
>>>> is the relative path to the artifact from the project that produced
>>>> it. Now to use buckminster for the resolution I need three pieces of
>>>> information:
>>>> -the name of the artifact
>>>> -the name of the project that produced the artifact
>>>> -the property value of artifact.ARTIFACTNAME.path
>>>>
>>>> The parent/child hierarchie seemed close enough to me to Maven +
>>>> Parent poms, so I decided to encode the information about the parent
>>>> project the same way:
>>>> projectName/artifactName is my component name.
>>>>
>>>> Now to look up the relative path I need to split
>>>> buckminster.component and use the artifact name as a property key
>>>> but I can't get it to work.
>>>> This is how it currently looks like. It's obvious why it doesn't
>>>> work, the 'format' creates a string artifact.artifactName.path, not
>>>> a property, but how would I treat it as a property?
>>>>
>>> Aha, you need to make part of a property a key for another property.
>>> Well, you can do that too :-). You need to use a propertyElement to
>>> declare a new property. You can define new properties on the RMAP top
>>> level.
>>>
>>> <propertyElement key="artifact.name">
>>> <bc:format format="{1}" >
>>> <bc:split pattern="/">
>>> <bc:propertyRef key="buckminster.component" />
>>> </bc:split>
>>> </bc:format>
>>> </propertyElement>
>>>
>>> That defines the new artifact.name property. In the provider uri
>>> element you should then be able to do:
>>>
>>> <bc:propertyRef key="artifact.${artifact.name}.path"/>
>>>
>>> HTH,
>>> Thomas Hallgren
>>>
>>>
>>>>
>>>> <searchPath name="Artifacts">
>>>> <provider readerType="url" componentTypes="jar">
>>>> <!-- the artifact will be in
>>>> //share/artifacts/projectName/${artifact.artifactName.path} -->
>>>> <uri format="file://share/artifacts/{1}/{0}">
>>>> <bc:format format="artifact.{1}.path" >
>>>> <bc:split pattern="/">
>>>> <bc:propertyRef key="buckminster.component" />
>>>> </bc:split>
>>>> </bc:format>
>>>> <bc:split pattern="/">
>>>> <bc:propertyRef key="buckminster.component" />
>>>> </bc:split> </uri>
>>>> </provider>
>>>> </searchPath>
>>>>
>>>> I think what I'd need now is a propertyRef that alows the value of a
>>>> nested child element to be the key, then I could resolve my property.
>>>> But maybe I'm just missing the obvious here...
>>>>
>>>> Best regards,
>>>> Johannes
>>>>
>>>> Thomas Hallgren schrieb:
>>>>> Hi Johannes,
>>>>> I'm not sure what it is you are trying to do here:
>>>>>
>>>>> <constant value="${buckminster.component}"/>
>>>>>
>>>>> is exactly the same as
>>>>>
>>>>> <propertyRef key="buckminster.component"/>
>>>>>
>>>>> but
>>>>>
>>>>> <propertyRef key="${buckminster.component}"/>
>>>>>
>>>>> will give you the value of a property with a key that corresponds
>>>>> to the component name. If you want to add things to that, you can
>>>>> of course do:
>>>>>
>>>>> <propertyRef key="${buckminster.component}.foo.bar"/>
>>>>>
>>>>> So what use-case is it that isn't covered?
>>>>>
>>>>> Regards,
>>>>> Thomas Hallgren
>>>>>
>>>>>
>>>>> Johannes Utzig wrote:
>>>>>> Hi Henrik,
>>>>>>
>>>>>> this works of course, but it's not solving my problem. In this
>>>>>> setup, ${user.language} will be expanded to its value and that
>>>>>> will be used as a key, but I need buckminster.component to be
>>>>>> expanded and use that to build a new property key and that's what
>>>>>> doesn't seem to work (that's why I introduced the constants in the
>>>>>> example, because if it would work with a constant, it would
>>>>>> probably also work with buckminster.component + propertyRef).
>>>>>>
>>>>>>
>>>>>> Maybe you have another idea, I'm out of them :)
>>>>>>
>>>>>
>>>>>
>>>>>> Best regards and thank you,
>>>>>> Johannes
>>>>>>
>>>>>> Henrik Lindberg schrieb:
>>>>>>> Hm,
>>>>>>> I can see why the ${{0}} does not work... the {0} is expanded
>>>>>>> last (duh - I should not have suggested that in the first place...)
>>>>>>>
>>>>>>> Here is another attempt:
>>>>>>> <uri format="file://share/artifacts/{0}" >
>>>>>>> <bc:propertyRef key="${user.language}" />
>>>>>>> </uri>
>>>>>>>
>>>>>>> - henrik
>>>>>>>
>>>>>>> Johannes Utzig wrote:
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> I'm sorry to bother you again, but I simply can't get this to work.
>>>>>>>> This gives me an illegal argument exception:
>>>>>>>> <searchPath name="Artifacts">
>>>>>>>> <provider readerType="url" componentTypes="jar">
>>>>>>>> <uri format="file://share/artifacts/${{0}}/">
>>>>>>>> <bc:constant value="user.language" />
>>>>>>>> </uri>
>>>>>>>> </provider>
>>>>>>>> </searchPath>
>>>>>>>> E [0039] : java.lang.IllegalArgumentException: can't parse
>>>>>>>> argument number {0}: can't parse argument number {0}
>>>>>>>>
>>>>>>>> Quoting it (file://share/artifacts/$'{'{0}'}')
>>>>>>>> doesn't expand the property and leads to an URISyntaxException:
>>>>>>>> java.net.URISyntaxException: Illegal character in path at index
>>>>>>>> 24: file://share/artifacts/${user.language}/
>>>>>>>>
>>>>>>>> This works however:
>>>>>>>> <uri format="file://share/artifacts/{0}/">
>>>>>>>> <bc:constant value="${user.language}"
>>>>>>>> /> </uri>
>>>>>>>>
>>>>>>>> This doesn't:
>>>>>>>> <uri format="file://share/artifacts/{0}/">
>>>>>>>> <bc:format format="{0}{1}{2}">
>>>>>>>> <bc:constant value="${" />
>>>>>>>> <bc:constant value="user.language" />
>>>>>>>> <bc:constant value="}" />
>>>>>>>> </bc:format> </uri>
>>>>>>>> ERROR java.net.URISyntaxException: Illegal character in
>>>>>>>> path at index 24: file://share/artifacts/${user.language}/
>>>>>>>>
>>>>>>>> (using user.language doesn't make much sense of course, in my
>>>>>>>> real case I use buckminster.component. user.language just makes
>>>>>>>> the example self contained without a bunch of properties for
>>>>>>>> every buckminster.component in the query).
>>>>>>>>
>>>>>>>> So, I'm really out of ideas on how this is supposed to work.
>>>>>>>> It's great that properties get expanded like that, but I just
>>>>>>>> don't understand how I can use the value of
>>>>>>>> buckminster.component in the key for a property that will
>>>>>>>> actually get expanded.
>>>>>>>>
>>>>>>>> Best regards,
>>>>>>>> Johannes
>>>>>>>>
>>>>>>>>
>>>>>>>>
|
|
| |
| Re: dynamic property refs [message #388474 is a reply to message #388401] |
Wed, 29 July 2009 10:16 |
Carsten Reckord
Messages: 139
Registered: July 2009 |
Senior Member |
|
|
When I experimented with top-level properties in my RMAPs, I noticed that they seem to be evaluated statically, i.e. once when the RMAP is
instantiated instead of per resolution. Therefore the
> <bc:propertyRef key="buckminster.component" />
will evaluate to null in a top-level propertyElement. I guess the NPE is caused by the subsequent formatting because either no {1} exists in
the String "null" or because it literally gets a null value from the propertyRef.
My problem with that was that things like this don't work:
<property key="default.value" value="null"/>
<property key="a.value" value="${default.value}"/>
<property key="b.value" value="${default.value}"/>
You'll always get a.value="null" even when default.value is set per -D or -P argument on invocation.
I wanted to use these kind of chained properties to make SCM urls and credentials per searchPath more configurable, like this:
<rmap>
<property key="svn.user" value="null"/>
<property key="svn.pass" value="null"/>
<property key="svn.user.a" value="${svn.user}"/>
<property key="svn.user.b" value="${svn.user}"/>
<property key="svn.pass.a" value="${svn.pass}"/>
<property key="svn.pass.b" value="${svn.pass}"/>
<property key="svn.url.a" value="svn+ssh://{0}:{1}@url/trunk"/>
<property key="svn.url.b" value="svn+ssh://{0}:{1}@other/url/trunk"/>
<searchPath name="a">
<provider readerType="svn" componentTypes="osgi.bundle,eclipse-feature" mutable="true" source="true">
<uri format="${svn.url.a}/{2}">
<bc:propertyRef key="svn.user.a" />
<bc:propertyRef key="svn.pass.a" />
<bc:propertyRef key="buckminster.component" />
</uri>
</provider>
</searchPath>
<searchPath name="b">
<provider readerType="svn" componentTypes="osgi.bundle,eclipse-feature" mutable="true" source="true">
<uri format="${svn.url.b}/{2}">
<bc:propertyRef key="svn.user.b" />
<bc:propertyRef key="svn.pass.b" />
<bc:propertyRef key="buckminster.component" />
</uri>
</provider>
</searchPath>
...
</rmap>
This way it would have been easy to override values on invocation without using a ton of properties (just set e.g. the svn.user and it's
used for all svn credentials, or override a specific one if that's needed)
On 29.07.2009 10:30, Johannes Utzig wrote:
> Thank you so much Thomas, this looks exactly like what I need.
> Unfortunately it gives me a NullPointerException without any stacktrace
> or message:
> ProjectName/ArtifactName:jar: Using resource map
> http://somehost.de/some.rmap
> ERROR [0001] : java.lang.NullPointerException
> Errors and Warnings
> E [0001] : java.lang.NullPointerException: java.lang.NullPointerException
>
> The NPE no longer occurs if I remove the split and format in the
> property element:
> <propertyElement key="artifact.name">
> <bc:propertyRef key="buckminster.component" />
> </propertyElement>
>
> Now the error is this:
> The property ${ artifact.${artifact.name}.path } has not been set and
> will default to null
>
> So it looks like the propertyElement does not properly expand
> buckminster.component?
>
> Best regards,
> Johannes
|
|
|
| Re: dynamic property refs [message #388485 is a reply to message #388474] |
Wed, 29 July 2009 11:02 |
|
Carsten Reckord wrote:
> When I experimented with top-level properties in my RMAPs, I noticed
> that they seem to be evaluated statically, i.e. once when the RMAP is
> instantiated instead of per resolution. Therefore the
>
> > <bc:propertyRef key="buckminster.component" />
>
> will evaluate to null in a top-level propertyElement. I guess the NPE is
> caused by the subsequent formatting because either no {1} exists in the
> String "null" or because it literally gets a null value from the
> propertyRef.
>
Ouch! Can you please enter a bugzilla on this?
|
|
|
| Re: dynamic property refs [message #388488 is a reply to message #388468] |
Wed, 29 July 2009 11:02 |
|
Hi Johannes,
Can you please enter a bugzilla on this NPE?
Thanks,
Thomas Hallgren
Johannes Utzig wrote:
> No, I checked that too, no more information:
>
> !ENTRY org.eclipse.buckminster.core 4 293 2009-07-29 10:24:26.312
> !MESSAGE Errors and Warnings
>
> !ENTRY org.eclipse.buckminster.core 4 293 2009-07-29 10:24:26.312
> !MESSAGE E [0001] : java.lang.NullPointerException:
> java.lang.NullPointerException
>
> !ENTRY org.eclipse.buckminster.core 2 293 2009-07-29 10:26:12.921
> !MESSAGE The property ${ artifact.${artifact.name}.path } has not been
> set and will default to null
>
> I also set the buckminster log level to debug but I'm not getting any
> additional information.
>
> Thomas Hallgren schrieb:
>> Does your <workspace>/.metadata/.log reveal anything?
>>
>> - thomas
>>
>> Johannes Utzig wrote:
>>> Thank you so much Thomas, this looks exactly like what I need.
>>> Unfortunately it gives me a NullPointerException without any
>>> stacktrace or message:
>>> ProjectName/ArtifactName:jar: Using resource map
>>> http://somehost.de/some.rmap
>>> ERROR [0001] : java.lang.NullPointerException
>>> Errors and Warnings
>>> E [0001] : java.lang.NullPointerException:
>>> java.lang.NullPointerException
>>>
>>> The NPE no longer occurs if I remove the split and format in the
>>> property element:
>>> <propertyElement key="artifact.name">
>>> <bc:propertyRef key="buckminster.component" />
>>> </propertyElement>
>>>
>>> Now the error is this:
>>> The property ${ artifact.${artifact.name}.path } has not been set and
>>> will default to null
>>>
>>> So it looks like the propertyElement does not properly expand
>>> buckminster.component?
>>>
>>> Best regards,
>>> Johannes
>>>
>>> Thomas Hallgren schrieb:
>>>> Johannes Utzig wrote:
>>>>> Hi Thomas,
>>>>>
>>>>> the thing that I can't seem to get to work is this:
>>>>> A property of the name artifact.ARTIFACTNAME.path has a value that
>>>>> is the relative path to the artifact from the project that produced
>>>>> it. Now to use buckminster for the resolution I need three pieces
>>>>> of information:
>>>>> -the name of the artifact
>>>>> -the name of the project that produced the artifact
>>>>> -the property value of artifact.ARTIFACTNAME.path
>>>>>
>>>>> The parent/child hierarchie seemed close enough to me to Maven +
>>>>> Parent poms, so I decided to encode the information about the
>>>>> parent project the same way:
>>>>> projectName/artifactName is my component name.
>>>>>
>>>>> Now to look up the relative path I need to split
>>>>> buckminster.component and use the artifact name as a property key
>>>>> but I can't get it to work.
>>>>> This is how it currently looks like. It's obvious why it doesn't
>>>>> work, the 'format' creates a string artifact.artifactName.path, not
>>>>> a property, but how would I treat it as a property?
>>>>>
>>>> Aha, you need to make part of a property a key for another property.
>>>> Well, you can do that too :-). You need to use a propertyElement to
>>>> declare a new property. You can define new properties on the RMAP
>>>> top level.
>>>>
>>>> <propertyElement key="artifact.name">
>>>> <bc:format format="{1}" >
>>>> <bc:split pattern="/">
>>>> <bc:propertyRef key="buckminster.component" />
>>>> </bc:split>
>>>> </bc:format>
>>>> </propertyElement>
>>>>
>>>> That defines the new artifact.name property. In the provider uri
>>>> element you should then be able to do:
>>>>
>>>> <bc:propertyRef key="artifact.${artifact.name}.path"/>
>>>>
>>>> HTH,
>>>> Thomas Hallgren
>>>>
>>>>
>>>>>
>>>>> <searchPath name="Artifacts">
>>>>> <provider readerType="url" componentTypes="jar">
>>>>> <!-- the artifact will be in
>>>>> //share/artifacts/projectName/${artifact.artifactName.path} -->
>>>>> <uri format="file://share/artifacts/{1}/{0}">
>>>>> <bc:format format="artifact.{1}.path" >
>>>>> <bc:split pattern="/">
>>>>> <bc:propertyRef key="buckminster.component" />
>>>>> </bc:split>
>>>>> </bc:format>
>>>>> <bc:split pattern="/">
>>>>> <bc:propertyRef key="buckminster.component" />
>>>>> </bc:split> </uri>
>>>>> </provider>
>>>>> </searchPath>
>>>>>
>>>>> I think what I'd need now is a propertyRef that alows the value of
>>>>> a nested child element to be the key, then I could resolve my
>>>>> property.
>>>>> But maybe I'm just missing the obvious here...
>>>>>
>>>>> Best regards,
>>>>> Johannes
>>>>>
>>>>> Thomas Hallgren schrieb:
>>>>>> Hi Johannes,
>>>>>> I'm not sure what it is you are trying to do here:
>>>>>>
>>>>>> <constant value="${buckminster.component}"/>
>>>>>>
>>>>>> is exactly the same as
>>>>>>
>>>>>> <propertyRef key="buckminster.component"/>
>>>>>>
>>>>>> but
>>>>>>
>>>>>> <propertyRef key="${buckminster.component}"/>
>>>>>>
>>>>>> will give you the value of a property with a key that corresponds
>>>>>> to the component name. If you want to add things to that, you can
>>>>>> of course do:
>>>>>>
>>>>>> <propertyRef key="${buckminster.component}.foo.bar"/>
>>>>>>
>>>>>> So what use-case is it that isn't covered?
>>>>>>
>>>>>> Regards,
>>>>>> Thomas Hallgren
>>>>>>
>>>>>>
>>>>>> Johannes Utzig wrote:
>>>>>>> Hi Henrik,
>>>>>>>
>>>>>>> this works of course, but it's not solving my problem. In this
>>>>>>> setup, ${user.language} will be expanded to its value and that
>>>>>>> will be used as a key, but I need buckminster.component to be
>>>>>>> expanded and use that to build a new property key and that's what
>>>>>>> doesn't seem to work (that's why I introduced the constants in
>>>>>>> the example, because if it would work with a constant, it would
>>>>>>> probably also work with buckminster.component + propertyRef).
>>>>>>>
>>>>>>>
>>>>>>> Maybe you have another idea, I'm out of them :)
>>>>>>>
>>>>>>
>>>>>>
>>>>>>> Best regards and thank you,
>>>>>>> Johannes
>>>>>>>
>>>>>>> Henrik Lindberg schrieb:
>>>>>>>> Hm,
>>>>>>>> I can see why the ${{0}} does not work... the {0} is expanded
>>>>>>>> last (duh - I should not have suggested that in the first place...)
>>>>>>>>
>>>>>>>> Here is another attempt:
>>>>>>>> <uri format="file://share/artifacts/{0}" >
>>>>>>>> <bc:propertyRef key="${user.language}" />
>>>>>>>> </uri>
>>>>>>>>
>>>>>>>> - henrik
>>>>>>>>
>>>>>>>> Johannes Utzig wrote:
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> I'm sorry to bother you again, but I simply can't get this to
>>>>>>>>> work.
>>>>>>>>> This gives me an illegal argument exception:
>>>>>>>>> <searchPath name="Artifacts">
>>>>>>>>> <provider readerType="url" componentTypes="jar">
>>>>>>>>> <uri format="file://share/artifacts/${{0}}/">
>>>>>>>>> <bc:constant value="user.language" />
>>>>>>>>> </uri>
>>>>>>>>> </provider>
>>>>>>>>> </searchPath>
>>>>>>>>> E [0039] : java.lang.IllegalArgumentException: can't parse
>>>>>>>>> argument number {0}: can't parse argument number {0}
>>>>>>>>>
>>>>>>>>> Quoting it (file://share/artifacts/$'{'{0}'}')
>>>>>>>>> doesn't expand the property and leads to an URISyntaxException:
>>>>>>>>> java.net.URISyntaxException: Illegal character in path at index
>>>>>>>>> 24: file://share/artifacts/${user.language}/
>>>>>>>>>
>>>>>>>>> This works however:
>>>>>>>>> <uri format="file://share/artifacts/{0}/">
>>>>>>>>> <bc:constant value="${user.language}"
>>>>>>>>> /> </uri>
>>>>>>>>>
>>>>>>>>> This doesn't:
>>>>>>>>> <uri format="file://share/artifacts/{0}/">
>>>>>>>>> <bc:format format="{0}{1}{2}">
>>>>>>>>> <bc:constant value="${" />
>>>>>>>>> <bc:constant value="user.language" />
>>>>>>>>> <bc:constant value="}" />
>>>>>>>>> </bc:format> </uri>
>>>>>>>>> ERROR java.net.URISyntaxException: Illegal character in
>>>>>>>>> path at index 24: file://share/artifacts/${user.language}/
>>>>>>>>>
>>>>>>>>> (using user.language doesn't make much sense of course, in my
>>>>>>>>> real case I use buckminster.component. user.language just makes
>>>>>>>>> the example self contained without a bunch of properties for
>>>>>>>>> every buckminster.component in the query).
>>>>>>>>>
>>>>>>>>> So, I'm really out of ideas on how this is supposed to work.
>>>>>>>>> It's great that properties get expanded like that, but I just
>>>>>>>>> don't understand how I can use the value of
>>>>>>>>> buckminster.component in the key for a property that will
>>>>>>>>> actually get expanded.
>>>>>>>>>
>>>>>>>>> Best regards,
>>>>>>>>> Johannes
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
|
|
|
| Re: dynamic property refs [message #388493 is a reply to message #388488] |
Wed, 29 July 2009 11:28 |
Johannes Utzig
Messages: 329
Registered: July 2009 |
Senior Member |
|
|
Hi Thomas,
done: https://bugs.eclipse.org/bugs/show_bug.cgi?id=284995
Best regards,
Johannes
Thomas Hallgren schrieb:
> Hi Johannes,
> Can you please enter a bugzilla on this NPE?
>
> Thanks,
> Thomas Hallgren
>
> Johannes Utzig wrote:
>> No, I checked that too, no more information:
>>
>> !ENTRY org.eclipse.buckminster.core 4 293 2009-07-29 10:24:26.312
>> !MESSAGE Errors and Warnings
>>
>> !ENTRY org.eclipse.buckminster.core 4 293 2009-07-29 10:24:26.312
>> !MESSAGE E [0001] : java.lang.NullPointerException:
>> java.lang.NullPointerException
>>
>> !ENTRY org.eclipse.buckminster.core 2 293 2009-07-29 10:26:12.921
>> !MESSAGE The property ${ artifact.${artifact.name}.path } has not been
>> set and will default to null
>>
>> I also set the buckminster log level to debug but I'm not getting any
>> additional information.
>>
>> Thomas Hallgren schrieb:
>>> Does your <workspace>/.metadata/.log reveal anything?
>>>
>>> - thomas
>>>
>>> Johannes Utzig wrote:
>>>> Thank you so much Thomas, this looks exactly like what I need.
>>>> Unfortunately it gives me a NullPointerException without any
>>>> stacktrace or message:
>>>> ProjectName/ArtifactName:jar: Using resource map
>>>> http://somehost.de/some.rmap
>>>> ERROR [0001] : java.lang.NullPointerException
>>>> Errors and Warnings
>>>> E [0001] : java.lang.NullPointerException:
>>>> java.lang.NullPointerException
>>>>
>>>> The NPE no longer occurs if I remove the split and format in the
>>>> property element:
>>>> <propertyElement key="artifact.name">
>>>> <bc:propertyRef key="buckminster.component" />
>>>> </propertyElement>
>>>>
>>>> Now the error is this:
>>>> The property ${ artifact.${artifact.name}.path } has not been set
>>>> and will default to null
>>>>
>>>> So it looks like the propertyElement does not properly expand
>>>> buckminster.component?
>>>>
>>>> Best regards,
>>>> Johannes
>>>>
>>>> Thomas Hallgren schrieb:
>>>>> Johannes Utzig wrote:
>>>>>> Hi Thomas,
>>>>>>
>>>>>> the thing that I can't seem to get to work is this:
>>>>>> A property of the name artifact.ARTIFACTNAME.path has a value
>>>>>> that is the relative path to the artifact from the project that
>>>>>> produced it. Now to use buckminster for the resolution I need
>>>>>> three pieces of information:
>>>>>> -the name of the artifact
>>>>>> -the name of the project that produced the artifact
>>>>>> -the property value of artifact.ARTIFACTNAME.path
>>>>>>
>>>>>> The parent/child hierarchie seemed close enough to me to Maven +
>>>>>> Parent poms, so I decided to encode the information about the
>>>>>> parent project the same way:
>>>>>> projectName/artifactName is my component name.
>>>>>>
>>>>>> Now to look up the relative path I need to split
>>>>>> buckminster.component and use the artifact name as a property key
>>>>>> but I can't get it to work.
>>>>>> This is how it currently looks like. It's obvious why it doesn't
>>>>>> work, the 'format' creates a string artifact.artifactName.path,
>>>>>> not a property, but how would I treat it as a property?
>>>>>>
>>>>> Aha, you need to make part of a property a key for another
>>>>> property. Well, you can do that too :-). You need to use a
>>>>> propertyElement to declare a new property. You can define new
>>>>> properties on the RMAP top level.
>>>>>
>>>>> <propertyElement key="artifact.name">
>>>>> <bc:format format="{1}" >
>>>>> <bc:split pattern="/">
>>>>> <bc:propertyRef key="buckminster.component" />
>>>>> </bc:split>
>>>>> </bc:format>
>>>>> </propertyElement>
>>>>>
>>>>> That defines the new artifact.name property. In the provider uri
>>>>> element you should then be able to do:
>>>>>
>>>>> <bc:propertyRef key="artifact.${artifact.name}.path"/>
>>>>>
>>>>> HTH,
>>>>> Thomas Hallgren
>>>>>
>>>>>
>>>>>>
>>>>>> <searchPath name="Artifacts">
>>>>>> <provider readerType="url" componentTypes="jar">
>>>>>> <!-- the artifact will be in
>>>>>> //share/artifacts/projectName/${artifact.artifactName.path} -->
>>>>>> <uri format="file://share/artifacts/{1}/{0}">
>>>>>> <bc:format format="artifact.{1}.path" >
>>>>>> <bc:split pattern="/">
>>>>>> <bc:propertyRef key="buckminster.component" />
>>>>>> </bc:split>
>>>>>> </bc:format>
>>>>>> <bc:split pattern="/">
>>>>>> <bc:propertyRef key="buckminster.component" />
>>>>>> </bc:split> </uri>
>>>>>> </provider>
>>>>>> </searchPath>
>>>>>>
>>>>>> I think what I'd need now is a propertyRef that alows the value of
>>>>>> a nested child element to be the key, then I could resolve my
>>>>>> property.
>>>>>> But maybe I'm just missing the obvious here...
>>>>>>
>>>>>> Best regards,
>>>>>> Johannes
>>>>>>
>>>>>> Thomas Hallgren schrieb:
>>>>>>> Hi Johannes,
>>>>>>> I'm not sure what it is you are trying to do here:
>>>>>>>
>>>>>>> <constant value="${buckminster.component}"/>
>>>>>>>
>>>>>>> is exactly the same as
>>>>>>>
>>>>>>> <propertyRef key="buckminster.component"/>
>>>>>>>
>>>>>>> but
>>>>>>>
>>>>>>> <propertyRef key="${buckminster.component}"/>
>>>>>>>
>>>>>>> will give you the value of a property with a key that corresponds
>>>>>>> to the component name. If you want to add things to that, you can
>>>>>>> of course do:
>>>>>>>
>>>>>>> <propertyRef key="${buckminster.component}.foo.bar"/>
>>>>>>>
>>>>>>> So what use-case is it that isn't covered?
>>>>>>>
>>>>>>> Regards,
>>>>>>> Thomas Hallgren
>>>>>>>
>>>>>>>
>>>>>>> Johannes Utzig wrote:
>>>>>>>> Hi Henrik,
>>>>>>>>
>>>>>>>> this works of course, but it's not solving my problem. In this
>>>>>>>> setup, ${user.language} will be expanded to its value and that
>>>>>>>> will be used as a key, but I need buckminster.component to be
>>>>>>>> expanded and use that to build a new property key and that's
>>>>>>>> what doesn't seem to work (that's why I introduced the constants
>>>>>>>> in the example, because if it would work with a constant, it
>>>>>>>> would probably also work with buckminster.component + propertyRef).
>>>>>>>>
>>>>>>>>
>>>>>>>> Maybe you have another idea, I'm out of them :)
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> Best regards and thank you,
>>>>>>>> Johannes
>>>>>>>>
>>>>>>>> Henrik Lindberg schrieb:
>>>>>>>>> Hm,
>>>>>>>>> I can see why the ${{0}} does not work... the {0} is expanded
>>>>>>>>> last (duh - I should not have suggested that in the first
>>>>>>>>> place...)
>>>>>>>>>
>>>>>>>>> Here is another attempt:
>>>>>>>>> <uri format="file://share/artifacts/{0}" >
>>>>>>>>> <bc:propertyRef key="${user.language}" />
>>>>>>>>> </uri>
>>>>>>>>>
>>>>>>>>> - henrik
>>>>>>>>>
>>>>>>>>> Johannes Utzig wrote:
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> I'm sorry to bother you again, but I simply can't get this to
>>>>>>>>>> work.
>>>>>>>>>> This gives me an illegal argument exception:
>>>>>>>>>> <searchPath name="Artifacts">
>>>>>>>>>> <provider readerType="url" componentTypes="jar">
>>>>>>>>>> <uri format="file://share/artifacts/${{0}}/">
>>>>>>>>>> <bc:constant value="user.language" />
>>>>>>>>>> </uri>
>>>>>>>>>> </provider>
>>>>>>>>>> </searchPath>
>>>>>>>>>> E [0039] : java.lang.IllegalArgumentException: can't parse
>>>>>>>>>> argument number {0}: can't parse argument number {0}
>>>>>>>>>>
>>>>>>>>>> Quoting it (file://share/artifacts/$'{'{0}'}')
>>>>>>>>>> doesn't expand the property and leads to an URISyntaxException:
>>>>>>>>>> java.net.URISyntaxException: Illegal character in path at
>>>>>>>>>> index 24: file://share/artifacts/${user.language}/
>>>>>>>>>>
>>>>>>>>>> This works however:
>>>>>>>>>> <uri format="file://share/artifacts/{0}/">
>>>>>>>>>> <bc:constant value="${user.language}"
>>>>>>>>>> /> </uri>
>>>>>>>>>>
>>>>>>>>>> This doesn't:
>>>>>>>>>> <uri format="file://share/artifacts/{0}/">
>>>>>>>>>> <bc:format format="{0}{1}{2}">
>>>>>>>>>> <bc:constant value="${" />
>>>>>>>>>> <bc:constant value="user.language" />
>>>>>>>>>> <bc:constant value="}" />
>>>>>>>>>> </bc:format> </uri>
>>>>>>>>>> ERROR java.net.URISyntaxException: Illegal character
>>>>>>>>>> in path at index 24: file://share/artifacts/${user.language}/
>>>>>>>>>>
>>>>>>>>>> (using user.language doesn't make much sense of course, in my
>>>>>>>>>> real case I use buckminster.component. user.language just
>>>>>>>>>> makes the example self contained without a bunch of properties
>>>>>>>>>> for every buckminster.component in the query).
>>>>>>>>>>
>>>>>>>>>> So, I'm really out of ideas on how this is supposed to work.
>>>>>>>>>> It's great that properties get expanded like that, but I just
>>>>>>>>>> don't understand how I can use the value of
>>>>>>>>>> buckminster.component in the key for a property that will
>>>>>>>>>> actually get expanded.
>>>>>>>>>>
>>>>>>>>>> Best regards,
>>>>>>>>>> Johannes
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
|
|
|
Goto Forum:
Current Time: Fri Sep 20 15:22:31 GMT 2024
Powered by FUDForum. Page generated in 0.08371 seconds |
] 
Search
Help
Register
Login
Home
