|
Re: Unable to resolve: org.eclipse.buckminster [message #375742 is a reply to message #375741] |
Tue, 08 April 2008 08:35 |
|
Hi Peter,
I just tried the query both my Windows box and on my Linux box and it runs just fine on both. Do you
have the Buckminster PDE feature and the Buckminster Subclipse support feature installed?
What update site are you using when you install Buckminster? Exactly what features (and versions) do
you currently have installed?
Lot's of questions but I'm not sure what kind of problem you are experiencing here. If you set the
trace level to DEBUG, then at least something should be printed no matter what type of failure you
are experiencing.
Regards,
Thomas Hallgren
Peter Kullmann wrote:
> I have tried to follow the "getting started" page
> ( http://wiki.eclipse.org/index.php/Getting_started_with_Buckm inster) in
> the section "Installation for Buckminster contributors". Using the
> following cquery
>
> http://www.eclipse.org/buckminster/samples/queries/buckminst er-dev.cquery
>
>
> and pressing Resolve to Wizard leads to the error "Unable to resolve:
> org.eclipse.buckminster". There is no further information as far as I
> can see. No entries in the console although I set the logging options to
> DEBUG and clicked copy eclipse log to console. How can I find out what's
> wrong here?
>
> Thanks for your help
>
> Peter
>
> PS: This happens on a clean E3.3.2 install with the newest Buckminster
> (yesterday) and subclipse. I tried it on my Mac and also on a windows box.
|
|
|
|
Re: Unable to resolve: org.eclipse.buckminster [message #375744 is a reply to message #375743] |
Tue, 08 April 2008 09:45 |
|
Hi Peter,
You've installed the o.e.buckminster.remote feature and at present, the server that it tries to
contact seems to be down. Can you please try the following:
Go into Buckminster preferences:
In the "Order of resolution", please select "cloudsmith" and then click "Remove". This will disable
the attempt to access the resolution service.
Regards,
Thomas Hallgren
Peter Kullmann wrote:
> Thomas, here is my configuration:
>
> o.e.buckminster.core.feature 1.0.0.r09041
> o.e.buckminster.cvs.feature 1.0.0.r09008
> o.e.buckminster.pde.feature 1.0.0.r09041
> o.e.buckminster.subclipse.feature 1.0.0.r08969
> org.tigris.subversion.subclipse 1.2.4
> Eclipse plattform is 3.3.3.
>
> (The names of the features seem to be off a bit; the core feature is
> named "Buckminster UI Plug-in" and the subclipse feature is "Buckminster
> Subversive Support Plug-in").
>
> The update site I used was:
> http://download.eclipse.org/tools/buckminster/updates
>
> When I tried right now again, I got an error UnknownHostException:
> rmap.cloudsmith.com. After that I tried again and got the error in the
> subject.
>
> I still don't see any messages in the console log but I have found
> output in the eclipse session log. You find it attached.
>
> Thanks for your help
> Peter
>
>
> Thomas Hallgren schrieb:
>> Hi Peter,
>> I just tried the query both my Windows box and on my Linux box and it
>> runs just fine on both. Do you have the Buckminster PDE feature and
>> the Buckminster Subclipse support feature installed?
>>
>> What update site are you using when you install Buckminster? Exactly
>> what features (and versions) do you currently have installed?
>>
>> Lot's of questions but I'm not sure what kind of problem you are
>> experiencing here. If you set the trace level to DEBUG, then at least
>> something should be printed no matter what type of failure you are
>> experiencing.
>>
>> Regards,
>> Thomas Hallgren
>>
>>
>> Peter Kullmann wrote:
>>> I have tried to follow the "getting started" page
>>> ( http://wiki.eclipse.org/index.php/Getting_started_with_Buckm inster)
>>> in the section "Installation for Buckminster contributors". Using the
>>> following cquery
>>>
>>> http://www.eclipse.org/buckminster/samples/queries/buckminst er-dev.cquery
>>>
>>>
>>> and pressing Resolve to Wizard leads to the error "Unable to resolve:
>>> org.eclipse.buckminster". There is no further information as far as I
>>> can see. No entries in the console although I set the logging options
>>> to DEBUG and clicked copy eclipse log to console. How can I find out
>>> what's wrong here?
>>>
>>> Thanks for your help
>>>
>>> Peter
>>>
>>> PS: This happens on a clean E3.3.2 install with the newest
>>> Buckminster (yesterday) and subclipse. I tried it on my Mac and also
>>> on a windows box.
>
|
|
|
Re: Unable to resolve: org.eclipse.buckminster [message #375745 is a reply to message #375744] |
Tue, 08 April 2008 10:05 |
Peter Kullmann Messages: 240 Registered: July 2009 |
Senior Member |
|
|
Dear Thomas
Thanks a lot. It now works!
Peter
Thomas Hallgren schrieb:
> Hi Peter,
> You've installed the o.e.buckminster.remote feature and at present, the
> server that it tries to contact seems to be down. Can you please try the
> following:
>
> Go into Buckminster preferences:
> In the "Order of resolution", please select "cloudsmith" and then click
> "Remove". This will disable the attempt to access the resolution service.
>
> Regards,
> Thomas Hallgren
>
>
> Peter Kullmann wrote:
>> Thomas, here is my configuration:
>>
>> o.e.buckminster.core.feature 1.0.0.r09041
>> o.e.buckminster.cvs.feature 1.0.0.r09008
>> o.e.buckminster.pde.feature 1.0.0.r09041
>> o.e.buckminster.subclipse.feature 1.0.0.r08969
>> org.tigris.subversion.subclipse 1.2.4
>> Eclipse plattform is 3.3.3.
>>
>> (The names of the features seem to be off a bit; the core feature is
>> named "Buckminster UI Plug-in" and the subclipse feature is
>> "Buckminster Subversive Support Plug-in").
>>
>> The update site I used was:
>> http://download.eclipse.org/tools/buckminster/updates
>>
>> When I tried right now again, I got an error UnknownHostException:
>> rmap.cloudsmith.com. After that I tried again and got the error in the
>> subject.
>>
>> I still don't see any messages in the console log but I have found
>> output in the eclipse session log. You find it attached.
>>
>> Thanks for your help
>> Peter
>>
>>
>> Thomas Hallgren schrieb:
>>> Hi Peter,
>>> I just tried the query both my Windows box and on my Linux box and it
>>> runs just fine on both. Do you have the Buckminster PDE feature and
>>> the Buckminster Subclipse support feature installed?
>>>
>>> What update site are you using when you install Buckminster? Exactly
>>> what features (and versions) do you currently have installed?
>>>
>>> Lot's of questions but I'm not sure what kind of problem you are
>>> experiencing here. If you set the trace level to DEBUG, then at least
>>> something should be printed no matter what type of failure you are
>>> experiencing.
>>>
>>> Regards,
>>> Thomas Hallgren
>>>
>>>
>>> Peter Kullmann wrote:
>>>> I have tried to follow the "getting started" page
>>>> ( http://wiki.eclipse.org/index.php/Getting_started_with_Buckm inster)
>>>> in the section "Installation for Buckminster contributors". Using
>>>> the following cquery
>>>>
>>>> http://www.eclipse.org/buckminster/samples/queries/buckminst er-dev.cquery
>>>>
>>>>
>>>> and pressing Resolve to Wizard leads to the error "Unable to
>>>> resolve: org.eclipse.buckminster". There is no further information
>>>> as far as I can see. No entries in the console although I set the
>>>> logging options to DEBUG and clicked copy eclipse log to console.
>>>> How can I find out what's wrong here?
>>>>
>>>> Thanks for your help
>>>>
>>>> Peter
>>>>
>>>> PS: This happens on a clean E3.3.2 install with the newest
>>>> Buckminster (yesterday) and subclipse. I tried it on my Mac and also
>>>> on a windows box.
>>
|
|
|
Re: Unable to resolve: org.eclipse.buckminster [message #375746 is a reply to message #375745] |
Tue, 08 April 2008 10:11 |
|
Hi Peter,
Good to hear.
There's one more thing that you should know. The buckminster-dev.cquery will resolve using our SVN
trunk. The trunk is where our Ganymede (Eclipse 3.4) development takes place. This means that you
might run into some problems trying to use this source with an Eclipse 3.3.x target platform.
If you want the source for the 3.3.x platform, you should use the buckminster.cquery.
Regards,
Thomas Hallgren
Peter Kullmann wrote:
> Dear Thomas
> Thanks a lot. It now works!
> Peter
>
|
|
|
Powered by
FUDForum. Page generated in 0.03194 seconds