Eclipse Community Forums
Forum Search:

Search      Help    Register    Login    Home
Home » Eclipse Projects » DSDP - Target Management » Create remote project error
Create remote project error [message #26805] Thu, 18 September 2008 01:37 Go to next message
Juan Felipe Alvarez Saldarriaga is currently offline Juan Felipe Alvarez SaldarriagaFriend
Messages: 23
Registered: July 2009
Junior Member
Hey!.

I'm using TM 3.0, Eclipse Europa and the PDT project on Windows, when I
Create a Remote Project all is fine, I can see the project, add libraries,
etc, but when I close the Eclipse and then I open it once again the
project seems like have nothing, the project is there but no files and I
get an error about "mydomain is connected", when I create a remote project
the files are not stored in my filesystem ?

Thx for any help.
Re: Create remote project error [message #27045 is a reply to message #26805] Tue, 23 September 2008 18:29 Go to previous messageGo to next message
Martin Oberhuber is currently offline Martin OberhuberFriend
Messages: 985
Registered: July 2009
Senior Member
Hello Juan Felipe,

your description of the problem is not very exhaustive, but could it be
that your remote project is just closed and you need to open it? That
would be
https://bugs.eclipse.org/bugs/show_bug.cgi?id=181460

Looking at your config, I'm assuming that you installed the PDT-1.0.3
All-in-one? Or can you give more exact specification of the versions
used? Also, what connection type are you using (SSH?)

Cheers,
--
Martin Oberhuber, Senior Member of Technical Staff, Wind River
Target Management Project Lead, DSDP PMC Member
http://www.eclipse.org/dsdp/tm




Juan Felipe Alvarez Saldarriaga wrote:
> Hey!.
>
> I'm using TM 3.0, Eclipse Europa and the PDT project on Windows, when I
> Create a Remote Project all is fine, I can see the project, add
> libraries, etc, but when I close the Eclipse and then I open it once
> again the project seems like have nothing, the project is there but no
> files and I get an error about "mydomain is connected", when I create a
> remote project the files are not stored in my filesystem ?
>
> Thx for any help.
>
Re: Create remote project error [message #27278 is a reply to message #27045] Fri, 26 September 2008 23:04 Go to previous messageGo to next message
Juan Felipe Alvarez Saldarriaga is currently offline Juan Felipe Alvarez SaldarriagaFriend
Messages: 23
Registered: July 2009
Junior Member
Hey!

My config is this one:
TM 3.0
PDT 1.0.3 All-In-One.
SSH

How to re-open it ?

Thx for any help.

Martin Oberhuber wrote:

> Hello Juan Felipe,

> your description of the problem is not very exhaustive, but could it be
> that your remote project is just closed and you need to open it? That
> would be
> https://bugs.eclipse.org/bugs/show_bug.cgi?id=181460

> Looking at your config, I'm assuming that you installed the PDT-1.0.3
> All-in-one? Or can you give more exact specification of the versions
> used? Also, what connection type are you using (SSH?)

> Cheers,
> --
> Martin Oberhuber, Senior Member of Technical Staff, Wind River
> Target Management Project Lead, DSDP PMC Member
> http://www.eclipse.org/dsdp/tm




> Juan Felipe Alvarez Saldarriaga wrote:
>> Hey!.
>>
>> I'm using TM 3.0, Eclipse Europa and the PDT project on Windows, when I
>> Create a Remote Project all is fine, I can see the project, add
>> libraries, etc, but when I close the Eclipse and then I open it once
>> again the project seems like have nothing, the project is there but no
>> files and I get an error about "mydomain is connected", when I create a
>> remote project the files are not stored in my filesystem ?
>>
>> Thx for any help.
>>
Re: Create remote project error [message #27338 is a reply to message #27278] Mon, 29 September 2008 14:32 Go to previous message
Martin Oberhuber is currently offline Martin OberhuberFriend
Messages: 985
Registered: July 2009
Senior Member
> How to re-open it ?

You right-click > Open Project ...
but, anyways, instead of doing "Create Remote Project", it is better
to create a local project and then link your remote folder into it.
Here's how you do that:
http://www.eclipse.org/newsportal/article.php?id=498&gro up=eclipse.dsdp.tm#498

Cheers,
--
Martin Oberhuber, Senior Member of Technical Staff, Wind River
Target Management Project Lead, DSDP PMC Member
http://www.eclipse.org/dsdp/tm
Re: Create remote project error [message #577159 is a reply to message #26805] Tue, 23 September 2008 18:29 Go to previous message
Martin Oberhuber is currently offline Martin OberhuberFriend
Messages: 985
Registered: July 2009
Senior Member
Hello Juan Felipe,

your description of the problem is not very exhaustive, but could it be
that your remote project is just closed and you need to open it? That
would be
https://bugs.eclipse.org/bugs/show_bug.cgi?id=181460

Looking at your config, I'm assuming that you installed the PDT-1.0.3
All-in-one? Or can you give more exact specification of the versions
used? Also, what connection type are you using (SSH?)

Cheers,
--
Martin Oberhuber, Senior Member of Technical Staff, Wind River
Target Management Project Lead, DSDP PMC Member
http://www.eclipse.org/dsdp/tm




Juan Felipe Alvarez Saldarriaga wrote:
> Hey!.
>
> I'm using TM 3.0, Eclipse Europa and the PDT project on Windows, when I
> Create a Remote Project all is fine, I can see the project, add
> libraries, etc, but when I close the Eclipse and then I open it once
> again the project seems like have nothing, the project is there but no
> files and I get an error about "mydomain is connected", when I create a
> remote project the files are not stored in my filesystem ?
>
> Thx for any help.
>
Re: Create remote project error [message #577265 is a reply to message #27045] Fri, 26 September 2008 23:04 Go to previous message
Juan Felipe Alvarez Saldarriaga is currently offline Juan Felipe Alvarez SaldarriagaFriend
Messages: 23
Registered: July 2009
Junior Member
Hey!

My config is this one:
TM 3.0
PDT 1.0.3 All-In-One.
SSH

How to re-open it ?

Thx for any help.

Martin Oberhuber wrote:

> Hello Juan Felipe,

> your description of the problem is not very exhaustive, but could it be
> that your remote project is just closed and you need to open it? That
> would be
> https://bugs.eclipse.org/bugs/show_bug.cgi?id=181460

> Looking at your config, I'm assuming that you installed the PDT-1.0.3
> All-in-one? Or can you give more exact specification of the versions
> used? Also, what connection type are you using (SSH?)

> Cheers,
> --
> Martin Oberhuber, Senior Member of Technical Staff, Wind River
> Target Management Project Lead, DSDP PMC Member
> http://www.eclipse.org/dsdp/tm




> Juan Felipe Alvarez Saldarriaga wrote:
>> Hey!.
>>
>> I'm using TM 3.0, Eclipse Europa and the PDT project on Windows, when I
>> Create a Remote Project all is fine, I can see the project, add
>> libraries, etc, but when I close the Eclipse and then I open it once
>> again the project seems like have nothing, the project is there but no
>> files and I get an error about "mydomain is connected", when I create a
>> remote project the files are not stored in my filesystem ?
>>
>> Thx for any help.
>>
Re: Create remote project error [message #577303 is a reply to message #27278] Mon, 29 September 2008 14:32 Go to previous message
Martin Oberhuber is currently offline Martin OberhuberFriend
Messages: 985
Registered: July 2009
Senior Member
> How to re-open it ?

You right-click > Open Project ...
but, anyways, instead of doing "Create Remote Project", it is better
to create a local project and then link your remote folder into it.
Here's how you do that:
http://www.eclipse.org/newsportal/article.php?id=498&gro up=eclipse.dsdp.tm#498

Cheers,
--
Martin Oberhuber, Senior Member of Technical Staff, Wind River
Target Management Project Lead, DSDP PMC Member
http://www.eclipse.org/dsdp/tm
Previous Topic:how to save the modifed file to remote system
Next Topic:How to download remote folder (via FTP, I think)
Goto Forum:
  


Current Time: Thu Nov 27 16:38:36 GMT 2014

Powered by FUDForum. Page generated in 0.01782 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.2.
Copyright ©2001-2010 FUDforum Bulletin Board Software