EndToEnd Test Framework

pyOpenPASS

This tool acts as configurable executor for complete sets of configs for the openPASS simulation. The test framework is located at sim/tests/endToEndTests/pyOpenPASS.

Prerequisites

Please refer to Installing the Binary Packages for instructions on installing the prerequisites. Execution ———

As pyOpenPASS is a pytest plugin (and is not yet a standalone-plugin) it will be automatically executed, when pytest finds its entry-point conftest.py (= local-pytest-plugin) next to files named test_*.json. So test files must be copied into the pyOpenPASS directory before execution.

pytest
  --simulation=SIMULATION_EXE     # path to simulation executable, e.g. /openPASS/bin/opSimulation
  --mutual=MUTUAL_RESOURCES_PATH  # path to mutual config files for all runs, e.g. /openPASS/bin/examples/common
  --resources=RESOURCES_PATH      # path from where configs are retrieved - override common files if necessary
  --report-path=REPORT_PATH       # path to where the report shall be stored
  TEST_FILE                       # file under test, named `test_*.json`

Note

You can use additional pytest arguments, such as -v for verbose output, --collect-only for listing the available tests and so on (see https://docs.pytest.org).

In addition pyOpenPASS supports the following optional arguments:

--configs-path=INPUT             # path for providing configs during testing
--results-path=OUTPUT            # path for collecting test results during testing
--artifacts-path=ARTIFACTS       # path for collecting test artifacts during testing

For each specified test_*.json a corresponding test_*.html will be generated.

Test Configuration

Test configuiration is by the test-json file, individually for each test. Depending on the users choice, three different tests runners are executed:

  1. Determinism: Check executability of configs + Determinism test (1 x n vs n x 1 tests).

  2. Parameterized: Check executability of configs using different parameters.

  3. Query: Execute config and check for specific results in the output of the simulator, given one or more queries.

In general, the test-json splits into two sections:

  1. Definition of Configuration Sets

  2. Definition of Tests using the Configuration Sets or a single Config directly

Note

Whenever possible, pyOpenPASS re-uses the results to speed up result analysis.

{
    "config_sets": {
        "Config_Set_1": [ // user defined name
            "Config_Folder_1",
            "Config_Folder_2"
        ],
        "Config_Set_2": [
            "Config_Folder_2",
            "Config_Folder_3"
        ],
        "Config_Set_3": [
            "Config_Folder_4"
        ]
    },
    "tests": {
        "Execution and Determinism": {
            "config_sets": [
                "Config_Set_1",
                "Config_Set_2",
                "Config_Set_3"
            ],
            "determinism": true, // ACTIVATES DETERMINISM
            "duration": 30, // how long shall be simulated
            "invocations": 3 // compare 1x3 run with 3x1 runs
        },
        "Parameterization": {
            "config_sets": [
                "Config_Set_2"
            ],
            "parameterization": { // ACTIVATES PARAMETERIZATION
                "file": "systemConfigFmu.xml", // Name of config, which shall be parameterized
                "xpath": "//value[../id='FmuPath']", // XPath, where values needs to be replaced
                "values": [ // Values, which shall be set
                    "resources/FMU1_StaticFMU.fmu",
                    "resources/FMU2_StaticFMU.fmu"
                ],
                "duration": 10,
                "invocations": 100
            },
            "Querying": {
                "config": "Config_Folder_2" // single config specification
                ],
                "queries": [ // ACTIVATES QUERYING
                    "count(AgentId | AgentId == 0 and Timestep == 10000 and VelocityEgo >= 30) == 1",
                    "mean(VelocityEgo | AgentId != 0) > 30"
                ],
                "success_rate": 0.8, // 80% of 60 invocations needs to pass
                "duration": 10,
                "invocations": 60,
                "description": "Optional description"
            }
        }
    }
}

  • If the success_rate is specified, its values must be between 0 and 1.

  • It is also possible to define a range of success (e.g. for excluding 100%) by using the following syntax:

    "success_rate": [0.8, 0.99] // 80% to 99% need to pass

Querying Results

Basic Syntax

[aggregate]([column] | [filter]) [operator] [value]

  • Aggregate: Everything pandas supports on dataframes, such as pandas.DataFrame.count, min, max, mean

  • Column: A column on which the aggregate should operate.

    Columns are generally given by the simulation outputs cyclic columns, such as PositionRoute. In addition the following columns are available:

    • AgentId

    • From the tag Agents (see simulationOutput.xml):

      • AgentTypeGroupName

      • AgentTypeName

      • VehicleModelType

      • DriverProfileName

      • AgentType

    • Everything from the tag RunStatistics (see simulationOutput.xml), which is currently:

      • RandomSeed

      • VisibilityDistance

      • StopReason

      • StopTime

      • EgoAccident

      • TotalDistanceTraveled

      • EgoDistanceTraveled

  • Filter: A filter based on pandas.DataFrame.filter syntax using the available columns.

  • Operator: A comparison operator from the following list: ==, <=, >=, <, >, !=, ~= (approximate). The approximate operator allows 1*e-6 x value as maximum deviation from value.

  • Value: A number

Note

In seldom cases, the filter can be skipped, e.g. when securing that no agent has been spawned: count(AgentId) == 0.

Example

count(AgentId | PositionRoute >= 800 and Lane != -3) == 0

Using Events in Filter

In order to query for a specific event, use #(EVENT) within the filter syntax.

Example

count(AgentId | PositionRoute >= 800 and #(Collision) == True) == 0

Event Payload

Each event is associated with a set of triggering entity ids, affected entity ids, and arbitrary key/value pairs (please refer to the openPASS documentation for details). This information is transformed into a “per agent” scope.

In the following the Collision event is taken as example.

TriggeringEntity

All agents, flagged as triggering become IsTriggering

Query: #(Collision):IsTriggering == True

AffectedEntity

All agents, flagged as affected become IsAffected

Query: #(Collision):IsAffected == True

Key/Value Pairs

If an event publishes additional payload with the key XYZ, it will can be queried by #(EVENT):XYZ.

Query: #(Collision):WithAgent

Warning

Keys carrying the event name as prefix, such as in #(Collision):CollisionWithAgent, will be stripped to Collision:WithAgent

Query Example

No agent should collide with agent 0:
count(AgentId | AgentId == 0 and #(Collision):WithAgent == 1) == 0

Using openSCENARIO Events

OpenScenario events are processed in the same manner as regular events (see above).

This allows to query for occurrences of openSCENARIO events with a name specified within the following xpath: OpenSCENARIO/Story/Act/Sequence/Maneuver/Event/@name

openSCENARIO Event Definition

<Story name="TheStory">
  <Act name="TheAct">
    <Sequence name="TheSequence" numberOfExecutions="1">
      ...
      <Maneuver name="TheManeuver">
        ...
        <!-- example name "ttc_event"-->
        <Event name="ttc_event" priority="overwrite">
        ...
          <StartConditions>
            <ConditionGroup>
              <Condition name="Conditional">
                <ByEntity>
                  ...
                  <EntityCondition>
                     <TimeToCollision>
                       ...
                     </TimeToCollision>
                  </EntityCondition>
                </ByEntity>
              </Condition>
            </ConditionGroup>
          </StartConditions>
        </Event>
        ...
      </Maneuver>
    </Sequence>
  </Act>
</Story>

Example openPASS Output

<Event Time="0" Source="OpenSCENARIO" Name="TheStory/TheAct/TheSequence/TheManeuver/ttc_event">
    <TriggeringEntities/>
    <AffectedEntities>
        <Entity Id="1"/>
    </AffectedEntities>
    <Parameters/>
</Event>

Query

count(AgentId | #(TheStory/TheAct/TheSequence/TheManeuver/ttc_event) == True ) > 0

Querying Transitions

Sometimes it is necessary to check, whether a transition happened, such as counting agents, passing a certain position.

This can be achieved by shifting individual columns by N time steps.

Time Shift Syntax

Column-Shift => PositionRoute-1 means PositionRoute at one time step earlier

Example Use Case

Counting agents passing PositionRoute == 350 on LaneId == -1

Query

count(AgentId | LaneId == -1 and PositionRoute-1 < 350 and PositionRoute >= 350 ) > 0

Warning

In seldom cases, a result column happens to have a name like Name-N where N is an integer. Querying this column would automatically apply time shifting (default behavior) leading to a parsing error. In such cases, escape the column name with single quotes (e.g. 'Name-1').

Querying Spawning Time

Queries can be restricted to the spawning time:

Query

count(AgentId | Timestep == {first} and Velocity < 30) == 0

Warning

Timestep == {first} must be the first parameter in the filter and can only succeeded by and.

Explicit Datatypes

pyOpenPASS uses Pandas DataFrames internally. Pandas will try to detect the datatype of the individual cyclic columns automatically. This won’t fit the user’s intention in some cases, such as when the column holds a semicolon separated list of integers but every list contains just one element. In such cases it is impossible to distinguish between integers and strings based on the data.

For this reason, datatypes can be specified explicitly along with a query:

"queries": [ ... ],
"datatypes": {
    "Sensor0_DetectedAgents": "str" // string with "missing value" support
}

Dev Notes

If you want to execute/debug pyOpenPASS in VS-Code, you can add a configuration, similar to the one shown below, to the launch.json after opening pyOpenPASS as VS-Code project:

"configurations": [
{
    "name": "pytest-openpass",
    "type": "python",
    "module": "pytest",
    "args": [
        "--simulation=/OpenPASS/bin/core/opSimulation",
        "--mutual=/OpenPASS/bin/core/examples/OSS/Common/",
        "--resources=/OpenPASS/bin/core/examples/OSS/Configurations/",
        "--report-path=/OpenPASS/reports",
        "test_end_to_end.json",
        "-v"],
    "request": "launch",
    "console": "integratedTerminal"
}]