| Papyrus has Oomph! [message #1404111] |
Tue, 29 July 2014 16:19  |
|
Hi, all,
The Eclipse Oomph Installer now provides a set-up model for Papyrus,
making it easier than ever to get a complete Eclipse workbench up and
running for development on the Papyrus source code. Just download the
Oomph Installer [1] and follow the simple wizard to create your IDE and
import the Papyrus source projects that you want to work on.
Pick any product you like on the first page, but be sure it's the Luna
release of that product. On the second page, expand Eclipse.org /
Papyrus to see the various components that you can import to work on.
Pick any combination of the leaf-level sub-(sub-)projects, even all of
them if you like. In the third page where you specify variables such
as install location, workspace location, git clone, etc. be sure to
choose "Luna" for the Target Platform. This ensures that you will be
set up to work on Papyrus Luna (SR1), which is the only development
stream currently supported by the setup model (until Mars development
gets under way).
Contributing your changes is easy because Oomph will clone the Papyrus
Git repository for you and configure Gerrit push.
Amongst possibly other details, the setup model configures:
* your IDE with all of the tools needed to edit and build the source
projects you choose
* your workspace with a Git clone and the source projects imported
from it that you choose
* a PDE target that includes all of the dependencies required by
Papyrus plus the latest
nightly build of Papyrus, itself, so that you can import only a
subset of the (many) source
projects but still run the complete Papyrus toolset in a run-time workbench
* Mylyn queries for current open bugs and enhancements in the Papyrus
bugzilla database
* Mylyn queries for the status of the latest Papyrus automated
builds, including tests
* Mylyn queries for open Gerrit reviews
* preferences enforcing the Papyrus standard compiler and code
formatter/template settings
So, try it out! And raise bugs if you see any problems in the setup
configuration.
Thanks,
Christian
[1] https://wiki.eclipse.org/Eclipse_Oomph_Installer
|
|
|
|
| Re: Papyrus has Oomph! [message #1412192 is a reply to message #1409683] |
Mon, 25 August 2014 14:18  |
|
Hi, Ernesto,
Sorry for the delayed response. I'm just now back from a few weeks of
vacation.
It seems that the FindBugs update site at the University of Maryland
has gone off-line and the only way to install that plug-in now is by
downloading a ZIP archive from their SourceForge page. That isn't so
easy to integrate into an Oomph setup, so I have removed the FindBugs
feature from the Papyrus setup model.
Installation should now work again using the latest Oomph installer.
The question mark decorations on some of the P2 Director requirements
are just indications that these features are optional; if they can't be
installed for some reason, then the setup should just proceed without
them. The problem in the FindBugs case was that the repository was not
available at all, which resulted in Oomph failing to complete any
install.
Cheers,
Christian
On 2014-08-18 18:25:11 +0000, Ernesto Posse said:
> Hi Christian.
>
> I'm unable to install Papyrus using the Oomph setup. A couple of weeks
> ago I was able to, but about 10 days ago the Oomph installation seems
> to have broken.
>
> I've been trying to recreate everything from scratch without any luck.
> To ensure that there are no conflicts and that I start from a clean
> slate, I remove my ~/.eclipse and ~/.p2 folders.
>
> I select Eclipse Standard/SDK and then select the Papyrus UML-RT
> sub-project. (If I don't select any Papyrus components it works, but
> the problem occurs with other Papyrus components). Then after
> downloading a lot of things it stops with an extremely long stream of
> exceptions, which always begin with the excerpt attached in the
> error.log file, which is just the truncated setup.log (the full file is
> 4MB). This always seems to point to problems with "eclemma" sites, but
> it completely fails to create an environment: the resulting folder for
> the IDE contains only a sub-folder called "configuration" (with
> setup.log) and nothing else.
>
> I also notice that three features are marked with an interrogation sign
> in the Oomph dialog just before beginning the bootstrap under "Nested
> Elements": one is EclEmma, the other one is "Findbugs" and I don't know
> what the third is (see attached screenshot).
>
> Has something changed in the past 10 days in the papyrus setup model?
>
> Can you help?
>
> Thanks
>
> <image><image>
|
|
|
|
|
Powered by
FUDForum. Page generated in 0.04389 seconds
] 
Search
Help
Register
Login
Home
