Eclipse Community Forums: Buckminster » is git.auto.fetch implemented at all?

Help

Home

Home » Archived » Buckminster » is git.auto.fetch implemented at all?

Show: Today's Messages :: Show Polls :: Message Navigator

is git.auto.fetch implemented at all? [message #1226792]

Thu, 02 January 2014 18:21

Lorenzo Bettini

Messages: 1815
Registered: July 2009
Location: Firenze, Italy

Senior Member

Hi

Is git.auto.fetch considered during materialization?

I have it in my rmap, but if I materialize an eclipse workspace again
(using the same cloned repository) it never auto pulls changes (I saw
also this http://www.eclipse.org/forums/index.php/t/221619/ ). The same
holds if I remove the eclipse workspace and start the materialization again.

Indeed, by looking at
http://git.eclipse.org/c/buckminster/buckminster.git/tree/org.eclipse.buckminster.git/src/org/eclipse/buckminster/git/internal/RepositoryAccess.java
the property is stored in the field autoFetch but never used later...

cheers
Lorenzo

--
Lorenzo Bettini, PhD in Computer Science, DI, Univ. Torino
HOME: http://www.lorenzobettini.it
Xtext Book:
http://www.packtpub.com/implementing-domain-specific-languages-with-xtext-and-xtend/book

HOME: http://www.lorenzobettini.it
TDD Book: https://leanpub.com/tdd-buildautomation-ci
Xtext Book: https://www.packtpub.com/application-development/implementing-domain-specific-languages-xtext-and-xtend-second-edition

Report message to a moderator

Re: is git.auto.fetch implemented at all? [message #1229407 is a reply to message #1226792]

Thu, 09 January 2014 11:33

Lorenzo Bettini

Messages: 1815
Registered: July 2009
Location: Firenze, Italy

Senior Member

anyone?

On 02/01/2014 19:21, Lorenzo Bettini wrote:
> Hi
>
> Is git.auto.fetch considered during materialization?
>
> I have it in my rmap, but if I materialize an eclipse workspace again
> (using the same cloned repository) it never auto pulls changes (I saw
> also this http://www.eclipse.org/forums/index.php/t/221619/ ). The same
> holds if I remove the eclipse workspace and start the materialization again.
>
> Indeed, by looking at
> http://git.eclipse.org/c/buckminster/buckminster.git/tree/org.eclipse.buckminster.git/src/org/eclipse/buckminster/git/internal/RepositoryAccess.java
> the property is stored in the field autoFetch but never used later...
>
> cheers
> Lorenzo
>

--
Lorenzo Bettini, PhD in Computer Science, DI, Univ. Torino
HOME: http://www.lorenzobettini.it
Xtext Book:
http://www.packtpub.com/implementing-domain-specific-languages-with-xtext-and-xtend/book

Report message to a moderator

Re: is git.auto.fetch implemented at all? [message #1233781 is a reply to message #1226792]

Mon, 20 January 2014 13:04

Thomas Hallgren

Messages: 3240
Registered: July 2009

Senior Member

On 2014-01-02 19:21, Lorenzo Bettini wrote:
> Hi
>
> Is git.auto.fetch considered during materialization?
>
Not really. That functionality was written as part of the first incarnation of the git support feature. I didn't know
enough about git to do a proper evaluation for a requirement spec. My current recommendation would be to not use it. If
someone has the time to look into how this should be implemented properly, then I'd be very interested in reviewing a
patch. One thing that comes to mind immediately is that the auto.fetch should be called auto.pull (since that's what it
was intended as).

- thomas

> I have it in my rmap, but if I materialize an eclipse workspace again
> (using the same cloned repository) it never auto pulls changes (I saw
> also this http://www.eclipse.org/forums/index.php/t/221619/ ). The same
> holds if I remove the eclipse workspace and start the materialization again.
>
> Indeed, by looking at
> http://git.eclipse.org/c/buckminster/buckminster.git/tree/org.eclipse.buckminster.git/src/org/eclipse/buckminster/git/internal/RepositoryAccess.java
> the property is stored in the field autoFetch but never used later...
>
> cheers
> Lorenzo
>

Report message to a moderator

Re: is git.auto.fetch implemented at all? [message #1236869 is a reply to message #1233781]

Tue, 28 January 2014 09:06

Lorenzo Bettini

Messages: 1815
Registered: July 2009
Location: Firenze, Italy

Senior Member

On 20/01/2014 14:04, Thomas Hallgren wrote:
> On 2014-01-02 19:21, Lorenzo Bettini wrote:
>> Hi
>>
>> Is git.auto.fetch considered during materialization?
>>
> Not really. That functionality was written as part of the first
> incarnation of the git support feature. I didn't know enough about git
> to do a proper evaluation for a requirement spec. My current
> recommendation would be to not use it. If someone has the time to look
> into how this should be implemented properly, then I'd be very
> interested in reviewing a patch. One thing that comes to mind
> immediately is that the auto.fetch should be called auto.pull (since
> that's what it was intended as).

OK, I'll submit a bug and see whether I can come up with something :)

cheers
Lorenzo

--
Lorenzo Bettini, PhD in Computer Science, DI, Univ. Torino
HOME: http://www.lorenzobettini.it
Xtext Book:
http://www.packtpub.com/implementing-domain-specific-languages-with-xtext-and-xtend/book

Report message to a moderator

Re: is git.auto.fetch implemented at all? [message #1438136 is a reply to message #1236869]

Sun, 05 October 2014 15:16

Ed Willink

Messages: 7681
Registered: July 2009

Senior Member

Hi

What is the status of this?

I appear to need to delete my Hudson Workspace to get a GIT 'refresh'.
Searching comes up with this correspondence.

On my Hudson HIPP I appear to have only the choice of Buckminster 4.2 so
perhaps 4.3 or 4.4 may have already fixed it.

But when I look at

https://projects.eclipse.org/projects/tools.buckminster/governance

I see that the current version of Buckminster is 2.0.0 perhaps released
18 months ago but if so without a release review. No plans for further
releases.

I'm really confused. What is the best Buckminster version and does it
fix the GIT refresh problem?

Regards

Ed Willink

On 28/01/2014 09:06, Lorenzo Bettini wrote:
> On 20/01/2014 14:04, Thomas Hallgren wrote:
>> On 2014-01-02 19:21, Lorenzo Bettini wrote:
>>> Hi
>>>
>>> Is git.auto.fetch considered during materialization?
>>>
>> Not really. That functionality was written as part of the first
>> incarnation of the git support feature. I didn't know enough about git
>> to do a proper evaluation for a requirement spec. My current
>> recommendation would be to not use it. If someone has the time to look
>> into how this should be implemented properly, then I'd be very
>> interested in reviewing a patch. One thing that comes to mind
>> immediately is that the auto.fetch should be called auto.pull (since
>> that's what it was intended as).
>
> OK, I'll submit a bug and see whether I can come up with something :)
>
> cheers
> Lorenzo
>

Report message to a moderator

Re: is git.auto.fetch implemented at all? [message #1462520 is a reply to message #1438136]

Wed, 05 November 2014 17:13

Ed Willink

Messages: 7681
Registered: July 2009

Senior Member

Hi

Ping. Anyone able to comment?

Regards

Ed Willink

On 05/10/2014 16:16, Ed Willink wrote:
> Hi
>
> What is the status of this?
>
> I appear to need to delete my Hudson Workspace to get a GIT 'refresh'.
> Searching comes up with this correspondence.
>
> On my Hudson HIPP I appear to have only the choice of Buckminster 4.2 so
> perhaps 4.3 or 4.4 may have already fixed it.
>
> But when I look at
>
> https://projects.eclipse.org/projects/tools.buckminster/governance
>
> I see that the current version of Buckminster is 2.0.0 perhaps released
> 18 months ago but if so without a release review. No plans for further
> releases.
>
> I'm really confused. What is the best Buckminster version and does it
> fix the GIT refresh problem?
>
> Regards
>
> Ed Willink
>
> On 28/01/2014 09:06, Lorenzo Bettini wrote:
>> On 20/01/2014 14:04, Thomas Hallgren wrote:
>>> On 2014-01-02 19:21, Lorenzo Bettini wrote:
>>>> Hi
>>>>
>>>> Is git.auto.fetch considered during materialization?
>>>>
>>> Not really. That functionality was written as part of the first
>>> incarnation of the git support feature. I didn't know enough about git
>>> to do a proper evaluation for a requirement spec. My current
>>> recommendation would be to not use it. If someone has the time to look
>>> into how this should be implemented properly, then I'd be very
>>> interested in reviewing a patch. One thing that comes to mind
>>> immediately is that the auto.fetch should be called auto.pull (since
>>> that's what it was intended as).
>>
>> OK, I'll submit a bug and see whether I can come up with something :)
>>
>> cheers
>> Lorenzo
>>
>

Report message to a moderator

Previous Topic:	java.lang.IllegalStateException: Preference node "file:" has been removed.
Next Topic:	Trouble fetching a maven dependency

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Wed Jan 15 17:20:11 GMT 2025

.:: Contact :: Home ::.

Breadcrumbs

Sign up to our Newsletter