Home » Modeling » EMF "Technology" (Ecore Tools, EMFatic, etc) » [Ecore Tools] Inconsistencies building from CVS
|
| Re: [Ecore Tools] Inconsistencies building from CVS [message #103237 is a reply to message #103191] |
Tue, 20 November 2007 14:41   |
 Jacques LESCOT
Messages: 247
Registered: July 2009 |
Senior Member |
|
|
Hi Ed,
Yes, you are probably a little too impatient, but this is very promising
for us : this means that people do not hesitate to try it before its
first release ! :-)
Anyway, as you noticed, CVS source code requires GMF 3.4M3 and its new
WrappingLabel implementation. However, as codegen templates have not
been fully updated, if you try to regenerate, you will get some old
references. I expect it will be soon fixed in the templates.
Then, there are probably some customized code, that we have not reported
at the gmfgen level : we will update this soon.
The Java formatter we are using is the GMF one
( http://dev.eclipse.org/viewcvs/index.cgi/org.eclipse.gmf/rel eng/org.eclipse.gmf.releng/eclipseSettings/GMF%20Formatter%2 0profile.xml?root=Modeling_Project&content-type=text%2Fx ml&revision=HEAD).
Otherwise, we have not used the Dashboard view to generate the editor.
But I can change this and include it in the CVS if you really need it.
Regards,
Jacques
Ed Willink a écrit :
> Hi
>
> I'm trying to shift my usage of the GMF Ecore Diagram to the Ecore Tools
> variant.
>
> Perhaps I'm just too quick off the mark.
>
> I was using Eclipse 3.3.1 and hit problems with WrapLabel/WrappingLabel
> and so
> upgraded to 3.4M3, which fixes the compilation problems but when I
> regenerate I find that WrapLabel is used rather than WrappingLabel and
> that there
> are minor differences in the generated files. For instance the wizard
> category
> in plugin.xml changes from org.eclipse.ui.Examples to
> org.eclipse.emf.ecoretools.diagram.
>
> Is there a preferred mechanism/plug-in versions for dashboard building
> at present?
>
> Could you please include your Java formatter preferences in CVS so that
> regenerated code can match CVS. The dashboard.prefs is also missing from
> CVS.
>
> Regards
>
> Ed Willink
>
>
>
|
|
| |
| Re: [Ecore Tools] Inconsistencies building from CVS [message #103456 is a reply to message #103316] |
Wed, 21 November 2007 16:06 |
Jacques LESCOT
Messages: 247
Registered: July 2009 |
Senior Member |
|
|
Hi,
see my comments below,
Ed Willink a écrit :
> Hi Jacques
>
>> Anyway, as you noticed, CVS source code requires GMF 3.4M3 and its new
>> WrappingLabel implementation. However, as codegen templates have not
>> been fully updated, if you try to regenerate, you will get some old
>> references. I expect it will be soon fixed in the templates.
>
> I presume you had to do a manual replace of all WrapLabel to WrappingLabel
> since TextAware.xpt still (CVS one hour ago) uses
>
> protected String getLabelTextHelper(org.eclipse.draw2d.IFigure
> figure) {
> if (figure instanceof
> org.eclipse.gmf.runtime.draw2d.ui.figures.WrapLabel) {
> return
> ((org.eclipse.gmf.runtime.draw2d.ui.figures.WrapLabel) figure).getText();
> } else {
> return ((org.eclipse.draw2d.Label) figure).getText();
> }
> }
>
> to distinguish figure types. This fails horribly for WrappingLabel which
> is not a WrapLabel and cannot be cast to Label. Attempting to open a
> generated
> .ecorediag fails with a CCE.
In fact, I checked out the GMF source code from CVS, and using
refactoring capabilities on the renaming of a class, it updated all my
old references : this is really better than replacing all the deprecated
references in all my projects using GMF. Refactoring is really powerful!
>
>>
>> The Java formatter we are using is the GMF one
>> ( http://dev.eclipse.org/viewcvs/index.cgi/org.eclipse.gmf/rel eng/org.eclipse.gmf.releng/eclipseSettings/GMF%20Formatter%2 0profile.xml?root=Modeling_Project&content-type=text%2Fx ml&revision=HEAD).
>
>
> Ta. That is close to what I deduced. But I seem to need to manually
> reformat to
> match line breaks in comments.
In fact, after each generation, I manually perform a global "Reformat"
on the whole project : however I noticed, that I behaves strangely on
inlined comments while applying several "Reformat" action. If I have
time, I will try to figure out what is happening and open a bug if
necessary.
>
>> Otherwise, we have not used the Dashboard view to generate the editor.
>> But I can change this and include it in the CVS if you really need it.
>
> I think you just need to include the attached. At present I know no other
> way to activate gmfgen.
I have just committed it on the CVS.
Jacques
>
> Ed
>
|
|
|
| Re: [Ecore Tools] Inconsistencies building from CVS [message #612605 is a reply to message #103191] |
Tue, 20 November 2007 14:41 |
Jacques LESCOT
Messages: 247
Registered: July 2009 |
Senior Member |
|
|
Hi Ed,
Yes, you are probably a little too impatient, but this is very promising
for us : this means that people do not hesitate to try it before its
first release ! :-)
Anyway, as you noticed, CVS source code requires GMF 3.4M3 and its new
WrappingLabel implementation. However, as codegen templates have not
been fully updated, if you try to regenerate, you will get some old
references. I expect it will be soon fixed in the templates.
Then, there are probably some customized code, that we have not reported
at the gmfgen level : we will update this soon.
The Java formatter we are using is the GMF one
( http://dev.eclipse.org/viewcvs/index.cgi/org.eclipse.gmf/rel eng/org.eclipse.gmf.releng/eclipseSettings/GMF%20Formatter%2 0profile.xml?root=Modeling_Project&content-type=text%2Fx ml&revision=HEAD).
Otherwise, we have not used the Dashboard view to generate the editor.
But I can change this and include it in the CVS if you really need it.
Regards,
Jacques
Ed Willink a écrit :
> Hi
>
> I'm trying to shift my usage of the GMF Ecore Diagram to the Ecore Tools
> variant.
>
> Perhaps I'm just too quick off the mark.
>
> I was using Eclipse 3.3.1 and hit problems with WrapLabel/WrappingLabel
> and so
> upgraded to 3.4M3, which fixes the compilation problems but when I
> regenerate I find that WrapLabel is used rather than WrappingLabel and
> that there
> are minor differences in the generated files. For instance the wizard
> category
> in plugin.xml changes from org.eclipse.ui.Examples to
> org.eclipse.emf.ecoretools.diagram.
>
> Is there a preferred mechanism/plug-in versions for dashboard building
> at present?
>
> Could you please include your Java formatter preferences in CVS so that
> regenerated code can match CVS. The dashboard.prefs is also missing from
> CVS.
>
> Regards
>
> Ed Willink
>
>
>
|
|
| |
| Re: [Ecore Tools] Inconsistencies building from CVS [message #612636 is a reply to message #103316] |
Wed, 21 November 2007 16:06 |
Jacques LESCOT
Messages: 247
Registered: July 2009 |
Senior Member |
|
|
Hi,
see my comments below,
Ed Willink a écrit :
> Hi Jacques
>
>> Anyway, as you noticed, CVS source code requires GMF 3.4M3 and its new
>> WrappingLabel implementation. However, as codegen templates have not
>> been fully updated, if you try to regenerate, you will get some old
>> references. I expect it will be soon fixed in the templates.
>
> I presume you had to do a manual replace of all WrapLabel to WrappingLabel
> since TextAware.xpt still (CVS one hour ago) uses
>
> protected String getLabelTextHelper(org.eclipse.draw2d.IFigure
> figure) {
> if (figure instanceof
> org.eclipse.gmf.runtime.draw2d.ui.figures.WrapLabel) {
> return
> ((org.eclipse.gmf.runtime.draw2d.ui.figures.WrapLabel) figure).getText();
> } else {
> return ((org.eclipse.draw2d.Label) figure).getText();
> }
> }
>
> to distinguish figure types. This fails horribly for WrappingLabel which
> is not a WrapLabel and cannot be cast to Label. Attempting to open a
> generated
> .ecorediag fails with a CCE.
In fact, I checked out the GMF source code from CVS, and using
refactoring capabilities on the renaming of a class, it updated all my
old references : this is really better than replacing all the deprecated
references in all my projects using GMF. Refactoring is really powerful!
>
>>
>> The Java formatter we are using is the GMF one
>> ( http://dev.eclipse.org/viewcvs/index.cgi/org.eclipse.gmf/rel eng/org.eclipse.gmf.releng/eclipseSettings/GMF%20Formatter%2 0profile.xml?root=Modeling_Project&content-type=text%2Fx ml&revision=HEAD).
>
>
> Ta. That is close to what I deduced. But I seem to need to manually
> reformat to
> match line breaks in comments.
In fact, after each generation, I manually perform a global "Reformat"
on the whole project : however I noticed, that I behaves strangely on
inlined comments while applying several "Reformat" action. If I have
time, I will try to figure out what is happening and open a bug if
necessary.
>
>> Otherwise, we have not used the Dashboard view to generate the editor.
>> But I can change this and include it in the CVS if you really need it.
>
> I think you just need to include the attached. At present I know no other
> way to activate gmfgen.
I have just committed it on the CVS.
Jacques
>
> Ed
>
|
|
|
Goto Forum:
Current Time: Tue Dec 03 14:55:03 GMT 2024
Powered by FUDForum. Page generated in 0.06128 seconds |
] 
Search
Help
Register
Login
Home
