Eclipse Community Forums: Buckminster » Headless SVN not working with 3.6?

Help

Home

Home » Archived » Buckminster » Headless SVN not working with 3.6?

Show: Today's Messages :: Show Polls :: Message Navigator

Headless SVN not working with 3.6? [message #519008]

Fri, 05 March 2010 16:43

Patrick Ruckstuhl

Messages: 65
Registered: July 2009

Member

I tried both subversive and subclipse but without success.

When I try it with subversive I get

ERROR   [0001] : org.eclipse.team.svn.core.operation.UnreportableException: Selected SVN connector library is not available or cannot be loaded.
If you selected native JavaHL connector, please check if binaries are available or install and select pure Java Subversion connector from the plug-in connectors update site.
If connectors already installed then you can change the selected one at: Window->Preferences->Team->SVN->SVN Connector.
INFO:  TAG-ID 0001 = Query for ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature

if I try subclipse I get

ERROR   [0001] : No suitable provider for component ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature was found in resourceMap file:/home/build/tmp/ch.ethz.origo.aranea.messagedsl.build/aranea.rmap
  ERROR   [0001] : No suitable provider for component ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature was found in searchPath aranea
    ERROR   [0001] : Rejecting provider svn(https://svn.origo.ethz.ch/aranea/trunk/dev/{0}): No component match was found
      ERROR   Unable to load default SVN Client
INFO:  TAG-ID 0001 = Query for ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature

Running the same mspec from within eclipse works fine and fetches the projects from SVN.

Report message to a moderator

Re: Headless SVN not working with 3.6? [message #519021 is a reply to message #519008]

Fri, 05 March 2010 17:35

Thomas Hallgren

Messages: 3240
Registered: July 2009

Senior Member

Hi Patrick,
What sites are you using for provisioning the headless Buckminster?

- thomas

On 03/05/2010 05:43 PM, Patrick Ruckstuhl wrote:
> I tried both subversive and subclipse but without success.
>
> When I try it with subversive I get
>
>
> ERROR [0001] :
> org.eclipse.team.svn.core.operation.UnreportableException: Selected SVN
> connector library is not available or cannot be loaded.
> If you selected native JavaHL connector, please check if binaries are
> available or install and select pure Java Subversion connector from the
> plug-in connectors update site.
> If connectors already installed then you can change the selected one at:
> Window->Preferences->Team->SVN->SVN Connector.
> INFO: TAG-ID 0001 = Query for
> ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature
>
>
>
> if I try subclipse I get
>
>
> ERROR [0001] : No suitable provider for component
> ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature was found in
> resourceMap
> file:/home/build/tmp/ch.ethz.origo.aranea.messagedsl.build/a ranea.rmap
> ERROR [0001] : No suitable provider for component
> ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature was found in
> searchPath aranea
> ERROR [0001] : Rejecting provider
> svn(https://svn.origo.ethz.ch/aranea/trunk/dev/{0}): No component match
> was found
> ERROR Unable to load default SVN Client
> INFO: TAG-ID 0001 = Query for
> ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature
>
>
> Running the same mspec from within eclipse works fine and fetches the
> projects from SVN.

Report message to a moderator

Re: Headless SVN not working with 3.6? [message #519028 is a reply to message #519021]

Fri, 05 March 2010 18:30

Carsten Reckord

Messages: 139
Registered: July 2009

Senior Member

Hi Thomas, hi Patrick,

I have the same problem with subversive when using
http://download.eclipse.org/tools/buckminster/headless-3.6
http://download.cloudsmith.com/buckminster/external-3.6

A workaround is to follow the procedure from https://bugs.eclipse.org/bugs/show_bug.cgi?id=295696 and install the SVN connectors directly
from polarion for the moment.

Carsten

On 05.03.2010 18:35, Thomas Hallgren wrote:
> Hi Patrick,
> What sites are you using for provisioning the headless Buckminster?
>
> - thomas
>
>
> On 03/05/2010 05:43 PM, Patrick Ruckstuhl wrote:
>> I tried both subversive and subclipse but without success.
>>
>> When I try it with subversive I get
>>
>>
>> ERROR [0001] :
>> org.eclipse.team.svn.core.operation.UnreportableException: Selected SVN
>> connector library is not available or cannot be loaded.
>> If you selected native JavaHL connector, please check if binaries are
>> available or install and select pure Java Subversion connector from the
>> plug-in connectors update site.
>> If connectors already installed then you can change the selected one at:
>> Window->Preferences->Team->SVN->SVN Connector.
>> INFO: TAG-ID 0001 = Query for
>> ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature
>>
>>
>>
>> if I try subclipse I get
>>
>>
>> ERROR [0001] : No suitable provider for component
>> ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature was found in
>> resourceMap
>> file:/home/build/tmp/ch.ethz.origo.aranea.messagedsl.build/a ranea.rmap
>> ERROR [0001] : No suitable provider for component
>> ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature was found in
>> searchPath aranea
>> ERROR [0001] : Rejecting provider
>> svn(https://svn.origo.ethz.ch/aranea/trunk/dev/{0}): No component match
>> was found
>> ERROR Unable to load default SVN Client
>> INFO: TAG-ID 0001 = Query for
>> ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature
>>
>>
>> Running the same mspec from within eclipse works fine and fetches the
>> projects from SVN.
>

Report message to a moderator

Re: Headless SVN not working with 3.6? [message #519042 is a reply to message #519028]

Fri, 05 March 2010 20:15

Thomas Hallgren

Messages: 3240
Registered: July 2009

Senior Member

Darn, I must have done something wrong when I published the new external site today. I'll have a look at it tomorrow.

Thanks for reporting so rapidly and I'm sorry for the inconvenience.

- thomas

On 03/05/2010 07:30 PM, Carsten Reckord wrote:
> Hi Thomas, hi Patrick,
>
> I have the same problem with subversive when using
> http://download.eclipse.org/tools/buckminster/headless-3.6
> http://download.cloudsmith.com/buckminster/external-3.6
>
> A workaround is to follow the procedure from
> https://bugs.eclipse.org/bugs/show_bug.cgi?id=295696 and install the SVN
> connectors directly from polarion for the moment.
>
> Carsten
>
> On 05.03.2010 18:35, Thomas Hallgren wrote:
>> Hi Patrick,
>> What sites are you using for provisioning the headless Buckminster?
>>
>> - thomas
>>
>>
>> On 03/05/2010 05:43 PM, Patrick Ruckstuhl wrote:
>>> I tried both subversive and subclipse but without success.
>>>
>>> When I try it with subversive I get
>>>
>>>
>>> ERROR [0001] :
>>> org.eclipse.team.svn.core.operation.UnreportableException: Selected SVN
>>> connector library is not available or cannot be loaded.
>>> If you selected native JavaHL connector, please check if binaries are
>>> available or install and select pure Java Subversion connector from the
>>> plug-in connectors update site.
>>> If connectors already installed then you can change the selected one at:
>>> Window->Preferences->Team->SVN->SVN Connector.
>>> INFO: TAG-ID 0001 = Query for
>>> ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature
>>>
>>>
>>>
>>> if I try subclipse I get
>>>
>>>
>>> ERROR [0001] : No suitable provider for component
>>> ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature was found in
>>> resourceMap
>>> file:/home/build/tmp/ch.ethz.origo.aranea.messagedsl.build/a ranea.rmap
>>> ERROR [0001] : No suitable provider for component
>>> ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature was found in
>>> searchPath aranea
>>> ERROR [0001] : Rejecting provider
>>> svn(https://svn.origo.ethz.ch/aranea/trunk/dev/{0}): No component match
>>> was found
>>> ERROR Unable to load default SVN Client
>>> INFO: TAG-ID 0001 = Query for
>>> ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature
>>>
>>>
>>> Running the same mspec from within eclipse works fine and fetches the
>>> projects from SVN.
>>

Report message to a moderator

Re: Headless SVN not working with 3.6? [message #519080 is a reply to message #519042]

Sat, 06 March 2010 08:28

Thomas Hallgren

Messages: 3240
Registered: July 2009

Senior Member

There is a problem with subversive but everything seems OK with subclipse. I have tested it on both Linux and Windows
(64 and 32 bit) and everything seems to work OK. Are you starting with a clean installation or updating an existing one?
Perhaps installing subclipse on top of subversive?

- thomas

On 03/05/2010 09:15 PM, Thomas Hallgren wrote:
> Darn, I must have done something wrong when I published the new external
> site today. I'll have a look at it tomorrow.
>
> Thanks for reporting so rapidly and I'm sorry for the inconvenience.
>
> - thomas
>
> On 03/05/2010 07:30 PM, Carsten Reckord wrote:
>> Hi Thomas, hi Patrick,
>>
>> I have the same problem with subversive when using
>> http://download.eclipse.org/tools/buckminster/headless-3.6
>> http://download.cloudsmith.com/buckminster/external-3.6
>>
>> A workaround is to follow the procedure from
>> https://bugs.eclipse.org/bugs/show_bug.cgi?id=295696 and install the SVN
>> connectors directly from polarion for the moment.
>>
>> Carsten
>>
>> On 05.03.2010 18:35, Thomas Hallgren wrote:
>>> Hi Patrick,
>>> What sites are you using for provisioning the headless Buckminster?
>>>
>>> - thomas
>>>
>>>
>>> On 03/05/2010 05:43 PM, Patrick Ruckstuhl wrote:
>>>> I tried both subversive and subclipse but without success.
>>>>
>>>> When I try it with subversive I get
>>>>
>>>>
>>>> ERROR [0001] :
>>>> org.eclipse.team.svn.core.operation.UnreportableException: Selected SVN
>>>> connector library is not available or cannot be loaded.
>>>> If you selected native JavaHL connector, please check if binaries are
>>>> available or install and select pure Java Subversion connector from the
>>>> plug-in connectors update site.
>>>> If connectors already installed then you can change the selected one
>>>> at:
>>>> Window->Preferences->Team->SVN->SVN Connector.
>>>> INFO: TAG-ID 0001 = Query for
>>>> ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature
>>>>
>>>>
>>>>
>>>> if I try subclipse I get
>>>>
>>>>
>>>> ERROR [0001] : No suitable provider for component
>>>> ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature was found in
>>>> resourceMap
>>>> file:/home/build/tmp/ch.ethz.origo.aranea.messagedsl.build/a ranea.rmap
>>>> ERROR [0001] : No suitable provider for component
>>>> ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature was found in
>>>> searchPath aranea
>>>> ERROR [0001] : Rejecting provider
>>>> svn(https://svn.origo.ethz.ch/aranea/trunk/dev/{0}): No component match
>>>> was found
>>>> ERROR Unable to load default SVN Client
>>>> INFO: TAG-ID 0001 = Query for
>>>> ch.ethz.origo.aranea.messagedsl.feature:eclipse.feature
>>>>
>>>>
>>>> Running the same mspec from within eclipse works fine and fetches the
>>>> projects from SVN.
>>>
>

Report message to a moderator

Re: Headless SVN not working with 3.6? [message #519081 is a reply to message #519008]

Sat, 06 March 2010 08:39

Patrick Ruckstuhl

Messages: 65
Registered: July 2009

Member

I did a clean installation, calling this commands

./director -r http://download.eclipse.org/tools/buckminster/headless-3.6 -d /home/build/bin/buckminster/buckminster -p Buckminster -i org.eclipse.buckminster.cmdline.product
cd ../buckminster
./buckminster install http://download.eclipse.org/tools/buckminster/headless-3.6  org.eclipse.buckminster.core.headless.feature
./buckminster install http://download.eclipse.org/tools/buckminster/headless-3.6  org.eclipse.buckminster.pde.headless.feature
./buckminster install http://download.eclipse.org/tools/buckminster/headless-3.6  org.eclipse.buckminster.emma.headless.feature
cd ../director
./director -r http://download.cloudsmith.com/buckminster/external-3.6/ -d /home/build/bin/buckminster/buckminster -p Buckminster -i org.eclipse.buckminster.subclipse

I'm on a 64bit debian linux

java version "1.6.0_12"
Java(TM) SE Runtime Environment (build 1.6.0_12-b04)
Java HotSpot(TM) 64-Bit Server VM (build 11.2-b01, mixed mode)

Report message to a moderator

Re: Headless SVN not working with 3.6? [message #519083 is a reply to message #519081]

Sat, 06 March 2010 09:04

Thomas Hallgren

Messages: 3240
Registered: July 2009

Senior Member

Hi Patrick,
You seem to install only one single bundle from our headless subclipse feature. That would explain a lot. This command
that you are using:

/director -r http://download.cloudsmith.com/buckminster/external-3.6/ -d /home/build/bin/buckminster/buckminster -p
Buckminster -i org.eclipse.buckminster.subclipse

will only install our subclipse wrapper bundle, not subclipse itself. You need to use either:

org.eclipse.buckminster.subclipse.headless.feature (for a buckminster install)

or:

org.eclipse.buckminster.subclipse.headless.feature.feature.g roup (for a director install)

- thomas

On 03/06/2010 09:39 AM, Patrick Ruckstuhl wrote:
> I did a clean installation, calling this commands
>
>
> /director -r http://download.eclipse.org/tools/buckminster/headless-3.6
> -d /home/build/bin/buckminster/buckminster -p Buckminster -i
> org.eclipse.buckminster.cmdline.product
> cd ../buckminster
> /buckminster install
> http://download.eclipse.org/tools/buckminster/headless-3.6
> org.eclipse.buckminster.core.headless.feature
> /buckminster install
> http://download.eclipse.org/tools/buckminster/headless-3.6
> org.eclipse.buckminster.pde.headless.feature
> /buckminster install
> http://download.eclipse.org/tools/buckminster/headless-3.6
> org.eclipse.buckminster.emma.headless.feature
> cd ../director
> /director -r http://download.cloudsmith.com/buckminster/external-3.6/ -d
> /home/build/bin/buckminster/buckminster -p Buckminster -i
> org.eclipse.buckminster.subclipse
>
>
> I'm on a 64bit debian linux
>
>
> java version "1.6.0_12"
> Java(TM) SE Runtime Environment (build 1.6.0_12-b04)
> Java HotSpot(TM) 64-Bit Server VM (build 11.2-b01, mixed mode)
>

Report message to a moderator

Re: Headless SVN not working with 3.6? [message #519084 is a reply to message #519008]

Sat, 06 March 2010 09:26

Patrick Ruckstuhl

Messages: 65
Registered: July 2009

Member

Ok, that works.

I followed the documentation which specified the other feature.

I opened an issue for this

https://bugs.eclipse.org/bugs/show_bug.cgi?id=304916

Report message to a moderator

Previous Topic:	Headless 3.6 installation not working
Next Topic:	Working directory, component directory for ant actors

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Wed Apr 24 23:58:46 GMT 2024

.:: Contact :: Home ::.

Breadcrumbs

Sign up to our Newsletter