Home » Eclipse Projects » Eclipse Platform » JUnit only runs properly in debug mode
|
| Re: JUnit only runs properly in debug mode [message #516560 is a reply to message #516449] |
Wed, 24 February 2010 11:46   |
 Ed Merks
Messages: 33140
Registered: July 2009 |
Senior Member |
|
|
Chris,
Have you looked closely at the corresponding run configurations? I.e.,
you're using the same run configuration in each case?
Chris wrote:
>
> I have a strange problem with JUnit. Basically, when I run a test
> class in 'run' mode, only one test method runs and the JUnit view
> doesn't get populated. If I run it in 'debug' mode, all the test
> methods are run and the JUnit view gets populated correctly.
>
> Eclipse 3.5.1 build 20090920-1017
> JUnit4
> The test classes extend AbstractTransactionalJUnit4SpringContextTests
>
> I have rebuilt the workspace, tried Junit3 as well as 4 and wrote a
> plain Junit4 test that loads the spring config manually, but nothing
> makes any difference.
>
> If the run configuration is of type JUnit, one would expect the test
> to run as a JUnit test, but it almost seems to run as a plain old java
> application instead.
>
> Regards
> Chris
>
>
>
>
>
Ed Merks
Professional Support: https://www.macromodeling.com/
|
|
|
| Re: JUnit only runs properly in debug mode [message #516889 is a reply to message #516560] |
Thu, 25 February 2010 13:17 |
Chris
Messages: 97
Registered: July 2009 |
Member |
|
|
I double checked and the only run configuration is a JUnit one.
I have run the test multiple times and each time, only one test method
runs, followed by the following exception...
13:07:21.062 [main] INFO o.s.t.c.t.TransactionalTestExecutionListener -
Rolled back transaction after test execution for test context
[[TestContext@19ec4ed testClass = AccountDaoTest, locations =
array<String>['classpath:/applicationContext.xml'], testInstance =
dao.AccountDaoTest@92dcdb, testMethod = fetchOneAccount@AccountDaoTest,
testException = [null]]]
org.junit.runner.notification.StoppedByUserException
at
org.junit.runner.notification.RunNotifier.fireTestStarted(Ru nNotifier.java:79)
at
org.junit.internal.runners.model.EachTestNotifier.fireTestSt arted(EachTestNotifier.java:41)
at
org.springframework.test.context.junit4.SpringJUnit4ClassRun ner.runChild(SpringJUnit4ClassRunner.java:238)
at
org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit 4ClassRunner.java:46)
at org.junit.runners.ParentRunner.runChildren(ParentRunner.java :180)
at org.junit.runners.ParentRunner.access$000(ParentRunner.java: 41)
at org.junit.runners.ParentRunner$1.evaluate(ParentRunner.java: 173)
at
org.junit.internal.runners.statements.RunBefores.evaluate(Ru nBefores.java:28)
at
org.springframework.test.context.junit4.statements.RunBefore TestClassCallbacks.evaluate(RunBeforeTestClassCallbacks.java :61)
at
org.junit.internal.runners.statements.RunAfters.evaluate(Run Afters.java:31)
at
org.springframework.test.context.junit4.statements.RunAfterT estClassCallbacks.evaluate(RunAfterTestClassCallbacks.java:7 0)
at org.junit.runners.ParentRunner.run(ParentRunner.java:220)
at
org.springframework.test.context.junit4.SpringJUnit4ClassRun ner.run(SpringJUnit4ClassRunner.java:180)
at
org.eclipse.jdt.internal.junit4.runner.JUnit4TestReference.r un(JUnit4TestReference.java:46)
at
org.eclipse.jdt.internal.junit.runner.TestExecution.run(Test Execution.java:38)
at
org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTe sts(RemoteTestRunner.java:467)
at
org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTe sts(RemoteTestRunner.java:683)
at
org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(R emoteTestRunner.java:390)
at
org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main( RemoteTestRunner.java:197)
Everytime I run it using: Debug As -> JUnit Test, it runs absolutely fine.
Interestingly, running it using: Run As -> JUnit Test, still creates an
entry in the JUnit view run history, even though there is no output
displayed in the JUnit view itself.
Cheers
Chris
On 24/02/2010 11:46, Ed Merks wrote:
> Chris,
>
> Have you looked closely at the corresponding run configurations? I.e.,
> you're using the same run configuration in each case?
>
>
> Chris wrote:
>>
>> I have a strange problem with JUnit. Basically, when I run a test
>> class in 'run' mode, only one test method runs and the JUnit view
>> doesn't get populated. If I run it in 'debug' mode, all the test
>> methods are run and the JUnit view gets populated correctly.
>>
>> Eclipse 3.5.1 build 20090920-1017
>> JUnit4
>> The test classes extend AbstractTransactionalJUnit4SpringContextTests
>>
>> I have rebuilt the workspace, tried Junit3 as well as 4 and wrote a
>> plain Junit4 test that loads the spring config manually, but nothing
>> makes any difference.
>>
>> If the run configuration is of type JUnit, one would expect the test
>> to run as a JUnit test, but it almost seems to run as a plain old java
>> application instead.
>>
>> Regards
>> Chris
>>
>>
>>
>>
>>
|
|
|
| Re: JUnit only runs properly in debug mode [message #517038 is a reply to message #516889] |
Thu, 25 February 2010 20:19 |
Bruce Kelly
Messages: 63
Registered: July 2009 |
Member |
|
|
When I looked at RunNotifier.fireTestStarted method it appears that someone
has called the RunNotifier.pleaseStop method during execution of the first
test.
It seems very strange that it only happens in normal run mode; makes it very
hard to debug :(
Namaste, Bruce
"Chris" <chrisjames64@hotmail.co.uk> wrote in message
news:hm5t9h$qgs$1@build.eclipse.org...
>
> I double checked and the only run configuration is a JUnit one.
>
> I have run the test multiple times and each time, only one test method
> runs, followed by the following exception...
>
> 13:07:21.062 [main] INFO o.s.t.c.t.TransactionalTestExecutionListener -
> Rolled back transaction after test execution for test context
> [[TestContext@19ec4ed testClass = AccountDaoTest, locations =
> array<String>['classpath:/applicationContext.xml'], testInstance =
> dao.AccountDaoTest@92dcdb, testMethod = fetchOneAccount@AccountDaoTest,
> testException = [null]]]
> org.junit.runner.notification.StoppedByUserException
> at
> org.junit.runner.notification.RunNotifier.fireTestStarted(Ru nNotifier.java:79)
> at
> org.junit.internal.runners.model.EachTestNotifier.fireTestSt arted(EachTestNotifier.java:41)
> at
> org.springframework.test.context.junit4.SpringJUnit4ClassRun ner.runChild(SpringJUnit4ClassRunner.java:238)
> at
> org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit 4ClassRunner.java:46)
> at org.junit.runners.ParentRunner.runChildren(ParentRunner.java :180)
> at org.junit.runners.ParentRunner.access$000(ParentRunner.java: 41)
> at org.junit.runners.ParentRunner$1.evaluate(ParentRunner.java: 173)
> at
> org.junit.internal.runners.statements.RunBefores.evaluate(Ru nBefores.java:28)
> at
> org.springframework.test.context.junit4.statements.RunBefore TestClassCallbacks.evaluate(RunBeforeTestClassCallbacks.java :61)
> at
> org.junit.internal.runners.statements.RunAfters.evaluate(Run Afters.java:31)
> at
> org.springframework.test.context.junit4.statements.RunAfterT estClassCallbacks.evaluate(RunAfterTestClassCallbacks.java:7 0)
> at org.junit.runners.ParentRunner.run(ParentRunner.java:220)
> at
> org.springframework.test.context.junit4.SpringJUnit4ClassRun ner.run(SpringJUnit4ClassRunner.java:180)
> at
> org.eclipse.jdt.internal.junit4.runner.JUnit4TestReference.r un(JUnit4TestReference.java:46)
> at
> org.eclipse.jdt.internal.junit.runner.TestExecution.run(Test Execution.java:38)
> at
> org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTe sts(RemoteTestRunner.java:467)
> at
> org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTe sts(RemoteTestRunner.java:683)
> at
> org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(R emoteTestRunner.java:390)
> at
> org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main( RemoteTestRunner.java:197)
>
>
> Everytime I run it using: Debug As -> JUnit Test, it runs absolutely fine.
> Interestingly, running it using: Run As -> JUnit Test, still creates an
> entry in the JUnit view run history, even though there is no output
> displayed in the JUnit view itself.
>
> Cheers
> Chris
>
>
>
>
>
>
> On 24/02/2010 11:46, Ed Merks wrote:
>> Chris,
>>
>> Have you looked closely at the corresponding run configurations? I.e.,
>> you're using the same run configuration in each case?
>>
>>
>> Chris wrote:
>>>
>>> I have a strange problem with JUnit. Basically, when I run a test
>>> class in 'run' mode, only one test method runs and the JUnit view
>>> doesn't get populated. If I run it in 'debug' mode, all the test
>>> methods are run and the JUnit view gets populated correctly.
>>>
>>> Eclipse 3.5.1 build 20090920-1017
>>> JUnit4
>>> The test classes extend AbstractTransactionalJUnit4SpringContextTests
>>>
>>> I have rebuilt the workspace, tried Junit3 as well as 4 and wrote a
>>> plain Junit4 test that loads the spring config manually, but nothing
>>> makes any difference.
>>>
>>> If the run configuration is of type JUnit, one would expect the test
>>> to run as a JUnit test, but it almost seems to run as a plain old java
>>> application instead.
>>>
>>> Regards
>>> Chris
>>>
>>>
>>>
>>>
>>>
>
|
|
|
Goto Forum:
Current Time: Thu Apr 25 00:14:19 GMT 2024
Powered by FUDForum. Page generated in 0.03259 seconds |
] 
Search
Help
Register
Login
Home
