Skip to main content


Eclipse Community Forums
Forum Search:

Search      Help    Register    Login    Home
Home » Modeling » EMF » [Teneo] Implementation classes only
[Teneo] Implementation classes only [message #422631] Thu, 11 September 2008 13:37 Go to next message
Eclipse UserFriend
Originally posted by: luzi.anderegg.ergon.ch

Hi,

I have an EMF model with "Suppress Interfaces" set to true in the
corresponding genmodel (that is only implementation classes and no
interfaces are generated). When I run my program with assertions
enabled, my program stops with the following output:
at org.eclipse.emf.teneo.ERuntime.isSelfOrSuperContained(ERunti me.java:176)
at
org.eclipse.emf.teneo.ERuntime.computeContainedClasses(ERunt ime.java:152)
at org.eclipse.emf.teneo.ERuntime.register(ERuntime.java:92)
at
org.eclipse.emf.teneo.annotations.mapper.AnnotationGenerator .map(AnnotationGenerator.java:89)
at
org.eclipse.emf.teneo.annotations.mapper.PersistenceMappingB uilder.buildMapping(PersistenceMappingBuilder.java:142)
at
org.eclipse.emf.teneo.annotations.mapper.PersistenceMappingB uilder.buildMapping(PersistenceMappingBuilder.java:66)
at
org.eclipse.emf.teneo.hibernate.HbDataStore.mapEPackages(HbD ataStore.java:609)
at
org.eclipse.emf.teneo.hibernate.HbSessionDataStore.mapModel( HbSessionDataStore.java:155)
at
org.eclipse.emf.teneo.hibernate.HbSessionDataStore.initializ e(HbSessionDataStore.java:73)

Regards,
Luzi
Re: [Teneo] Implementation classes only [message #422632 is a reply to message #422631] Thu, 11 September 2008 14:31 Go to previous messageGo to next message
Eclipse UserFriend
Originally posted by: luzi.anderegg.ergon.ch

as a small addendum: I tried the same thing with the library sample by
only generating implementation classes and the same assertion arises.

Does Teneo incorporate the feature "suppress interfaces"?

Thanks for any information
Luzi
Re: [Teneo] Implementation classes only [message #422635 is a reply to message #422632] Thu, 11 September 2008 14:51 Go to previous messageGo to next message
Martin Taal is currently offline Martin TaalFriend
Messages: 5468
Registered: July 2009
Senior Member
Hi Luzi,
It feels like a bug... I will reproduce this on my machine and then come back to you (hopefully
later today/early tomorrow).

gr. Martin

Luzi Anderegg wrote:
> as a small addendum: I tried the same thing with the library sample by
> only generating implementation classes and the same assertion arises.
>
> Does Teneo incorporate the feature "suppress interfaces"?
>
> Thanks for any information
> Luzi


--

With Regards, Martin Taal

Springsite/Elver.org
Office: Hardwareweg 4, 3821 BV Amersfoort
Postal: Nassaulaan 7, 3941 EC Doorn
The Netherlands
Cell: +31 (0)6 288 48 943
Tel: +31 (0)84 420 2397
Fax: +31 (0)84 225 9307
Mail: mtaal@springsite.com - mtaal@elver.org
Web: www.springsite.com - www.elver.org
Re: [Teneo] Implementation classes only [message #422656 is a reply to message #422632] Fri, 12 September 2008 05:13 Go to previous messageGo to next message
Martin Taal is currently offline Martin TaalFriend
Messages: 5468
Registered: July 2009
Senior Member
Hi Luzi,
I tested this and this is indeed a bug. Can you enter a bugzilla for this? Then I will solve this in
the next build.

gr. Martin

Luzi Anderegg wrote:
> as a small addendum: I tried the same thing with the library sample by
> only generating implementation classes and the same assertion arises.
>
> Does Teneo incorporate the feature "suppress interfaces"?
>
> Thanks for any information
> Luzi


--

With Regards, Martin Taal

Springsite/Elver.org
Office: Hardwareweg 4, 3821 BV Amersfoort
Postal: Nassaulaan 7, 3941 EC Doorn
The Netherlands
Cell: +31 (0)6 288 48 943
Tel: +31 (0)84 420 2397
Fax: +31 (0)84 225 9307
Mail: mtaal@springsite.com - mtaal@elver.org
Web: www.springsite.com - www.elver.org
Re: [Teneo] Implementation classes only [message #422660 is a reply to message #422656] Fri, 12 September 2008 06:47 Go to previous messageGo to next message
Bruno Ziswiler is currently offline Bruno ZiswilerFriend
Messages: 7
Registered: July 2009
Junior Member
Hi Martin

I'm in the team with Luzi. Thanks for your kind reply. We will enter the
issue into bugzilla.

Is the fix obvious to you? What would be a work-around so we are able to
proceed with our project?


Thanks,
Bruno


Martin Taal wrote:
> Hi Luzi,
> I tested this and this is indeed a bug. Can you enter a bugzilla for
> this? Then I will solve this in the next build.
>
> gr. Martin
>
> Luzi Anderegg wrote:
>> as a small addendum: I tried the same thing with the library sample by
>> only generating implementation classes and the same assertion arises.
>>
>> Does Teneo incorporate the feature "suppress interfaces"?
>>
>> Thanks for any information
>> Luzi
>
>
Re: [Teneo] Implementation classes only [message #422695 is a reply to message #422660] Sat, 13 September 2008 19:08 Go to previous messageGo to next message
Martin Taal is currently offline Martin TaalFriend
Messages: 5468
Registered: July 2009
Senior Member
Hi Bruno,
If you enter a bugzilla I will do a fix right away and include it in a build which I will also do
very quickly (same day). I don't have a quicker workaround at the moment.

gr. Martin

Bruno Ziswiler wrote:
> Hi Martin
>
> I'm in the team with Luzi. Thanks for your kind reply. We will enter the
> issue into bugzilla.
>
> Is the fix obvious to you? What would be a work-around so we are able to
> proceed with our project?
>
>
> Thanks,
> Bruno
>
>
> Martin Taal wrote:
>> Hi Luzi,
>> I tested this and this is indeed a bug. Can you enter a bugzilla for
>> this? Then I will solve this in the next build.
>>
>> gr. Martin
>>
>> Luzi Anderegg wrote:
>>> as a small addendum: I tried the same thing with the library sample by
>>> only generating implementation classes and the same assertion arises.
>>>
>>> Does Teneo incorporate the feature "suppress interfaces"?
>>>
>>> Thanks for any information
>>> Luzi
>>
>>


--

With Regards, Martin Taal

Springsite/Elver.org
Office: Hardwareweg 4, 3821 BV Amersfoort
Postal: Nassaulaan 7, 3941 EC Doorn
The Netherlands
Cell: +31 (0)6 288 48 943
Tel: +31 (0)84 420 2397
Fax: +31 (0)84 225 9307
Mail: mtaal@springsite.com - mtaal@elver.org
Web: www.springsite.com - www.elver.org
Re: [Teneo] Implementation classes only [message #422722 is a reply to message #422695] Mon, 15 September 2008 10:03 Go to previous messageGo to next message
Bruno Ziswiler is currently offline Bruno ZiswilerFriend
Messages: 7
Registered: July 2009
Junior Member
Hi Martin

Thanks for your quick answer. I entered the issue into Bugzilla (#247256).


Regards
Bruno


Martin Taal wrote:
> Hi Bruno,
> If you enter a bugzilla I will do a fix right away and include it in a
> build which I will also do very quickly (same day). I don't have a
> quicker workaround at the moment.
>
> gr. Martin
>
> Bruno Ziswiler wrote:
>> Hi Martin
>>
>> I'm in the team with Luzi. Thanks for your kind reply. We will enter
>> the issue into bugzilla.
>>
>> Is the fix obvious to you? What would be a work-around so we are able
>> to proceed with our project?
>>
>>
>> Thanks,
>> Bruno
>>
>>
>> Martin Taal wrote:
>>> Hi Luzi,
>>> I tested this and this is indeed a bug. Can you enter a bugzilla for
>>> this? Then I will solve this in the next build.
>>>
>>> gr. Martin
>>>
>>> Luzi Anderegg wrote:
>>>> as a small addendum: I tried the same thing with the library sample by
>>>> only generating implementation classes and the same assertion arises.
>>>>
>>>> Does Teneo incorporate the feature "suppress interfaces"?
>>>>
>>>> Thanks for any information
>>>> Luzi
>>>
>>>
>
>
Re: [Teneo] Implementation classes only [message #422829 is a reply to message #422722] Tue, 16 September 2008 15:45 Go to previous messageGo to next message
Eclipse UserFriend
Originally posted by: luzi.anderegg.ergon.ch

Hi Martin

thanks for the quick fix. The assertion doesn't fail anymore as it is
not here anymore :-).

My application now fails at another point (see below). Do you have any
ideas about this one?

Regards,
Luzi

java.lang.IllegalArgumentException: The class 'DataPoint' is not a valid
classifier
at
ch.belimo.bd.commissioning.businessmodel.system.SystemFactor y.create(SystemFactory.java:99)
at org.eclipse.emf.ecore.util.EcoreUtil.create(EcoreUtil.java:3 169)
at
org.eclipse.emf.teneo.hibernate.tuplizer.EMFInstantiator.ins tantiate(EMFInstantiator.java:85)
at
org.hibernate.tuple.entity.AbstractEntityTuplizer.instantiat e(AbstractEntityTuplizer.java:351)
at
org.hibernate.persister.entity.AbstractEntityPersister.insta ntiate(AbstractEntityPersister.java:3611)
at org.hibernate.impl.SessionImpl.instantiate(SessionImpl.java: 1275)
at org.hibernate.impl.SessionImpl.instantiate(SessionImpl.java: 1264)
at org.hibernate.loader.Loader.instanceNotYetLoaded(Loader.java :1299)
at org.hibernate.loader.Loader.getRow(Loader.java:1206)
at org.hibernate.loader.Loader.getRowFromResultSet(Loader.java: 580)
at org.hibernate.loader.Loader.doQuery(Loader.java:701)
at
org.hibernate.loader.Loader.doQueryAndInitializeNonLazyColle ctions(Loader.java:236)
at org.hibernate.loader.Loader.loadCollection(Loader.java:1994)
at
org.hibernate.loader.collection.CollectionLoader.initialize( CollectionLoader.java:36)
at
org.hibernate.persister.collection.AbstractCollectionPersist er.initialize(AbstractCollectionPersister.java:565)
at
org.hibernate.event.def.DefaultInitializeCollectionEventList ener.onInitializeCollection(DefaultInitializeCollectionEvent Listener.java:63)
at
org.eclipse.emf.teneo.hibernate.mapping.EMFInitializeCollect ionEventListener.onInitializeCollection(EMFInitializeCollect ionEventListener.java:61)
at
org.hibernate.impl.SessionImpl.initializeCollection(SessionI mpl.java:1716)
at
org.hibernate.collection.AbstractPersistentCollection.initia lize(AbstractPersistentCollection.java:344)
at
org.hibernate.collection.AbstractPersistentCollection.read(A bstractPersistentCollection.java:86)
at org.hibernate.collection.PersistentList.toArray(PersistentLi st.java:123)
at
org.eclipse.emf.teneo.hibernate.mapping.elist.HibernatePersi stableEList.doLoad(HibernatePersistableEList.java:138)
at
org.eclipse.emf.teneo.mapping.elist.PersistableEList.load(Pe rsistableEList.java:207)
at
org.eclipse.emf.teneo.mapping.elist.PersistableEList.delegat eSize(PersistableEList.java:443)
at
org.eclipse.emf.common.util.DelegatingEList.size(DelegatingE List.java:224)
at
org.eclipse.emf.common.util.DelegatingEList$EIterator.hasNex t(DelegatingEList.java:1050)
at
org.eclipse.emf.edit.provider.ItemProviderAdapter.getChildre n(ItemProviderAdapter.java:340)
at
org.eclipse.emf.edit.provider.ItemProviderAdapter.hasChildre n(ItemProviderAdapter.java:397)
at
org.eclipse.emf.edit.provider.ItemProviderAdapter.hasChildre n(ItemProviderAdapter.java:384)
at
org.eclipse.emf.edit.ui.provider.AdapterFactoryContentProvid er.hasChildren(AdapterFactoryContentProvider.java:198)
at
org.eclipse.jface.viewers.AbstractTreeViewer.isExpandable(Ab stractTreeViewer.java:2076)
Bruno Ziswiler wrote:
> Hi Martin
>
> Thanks for your quick answer. I entered the issue into Bugzilla (#247256).
>
>
> Regards
> Bruno
>
>
> Martin Taal wrote:
>> Hi Bruno,
>> If you enter a bugzilla I will do a fix right away and include it in a
>> build which I will also do very quickly (same day). I don't have a
>> quicker workaround at the moment.
>>
>> gr. Martin
>>
>> Bruno Ziswiler wrote:
>>> Hi Martin
>>>
>>> I'm in the team with Luzi. Thanks for your kind reply. We will enter
>>> the issue into bugzilla.
>>>
>>> Is the fix obvious to you? What would be a work-around so we are able
>>> to proceed with our project?
>>>
>>>
>>> Thanks,
>>> Bruno
>>>
>>>
>>> Martin Taal wrote:
>>>> Hi Luzi,
>>>> I tested this and this is indeed a bug. Can you enter a bugzilla for
>>>> this? Then I will solve this in the next build.
>>>>
>>>> gr. Martin
>>>>
>>>> Luzi Anderegg wrote:
>>>>> as a small addendum: I tried the same thing with the library sample by
>>>>> only generating implementation classes and the same assertion arises.
>>>>>
>>>>> Does Teneo incorporate the feature "suppress interfaces"?
>>>>>
>>>>> Thanks for any information
>>>>> Luzi
>>>>
>>>>
>>
>>
Re: [Teneo] Implementation classes only [message #422832 is a reply to message #422829] Tue, 16 September 2008 19:16 Go to previous messageGo to next message
Martin Taal is currently offline Martin TaalFriend
Messages: 5468
Registered: July 2009
Senior Member
Hi Luzi,
Yes this was very old code and afaics the assertion was not meaningfull anymore (and all the
testcases pass). But I agree that this was an easy solution... :-).

Regarding your exception. It is a strange one. The code in EcoreUtil.create is this:
eClass.getEPackage().getEFactoryInstance().create(eClass)

the exception means that the factory of the ePackage of the eClass does not know the eClass.

I would put a breakpoint at the point where the exception occurs and then check why the eClass is
not recognized.

gr. Martin

Luzi Anderegg wrote:
> Hi Martin
>
> thanks for the quick fix. The assertion doesn't fail anymore as it is
> not here anymore :-).
>
> My application now fails at another point (see below). Do you have any
> ideas about this one?
>
> Regards,
> Luzi
>
> java.lang.IllegalArgumentException: The class 'DataPoint' is not a valid
> classifier
> at
> ch.belimo.bd.commissioning.businessmodel.system.SystemFactor y.create(SystemFactory.java:99)
>
> at org.eclipse.emf.ecore.util.EcoreUtil.create(EcoreUtil.java:3 169)
> at
> org.eclipse.emf.teneo.hibernate.tuplizer.EMFInstantiator.ins tantiate(EMFInstantiator.java:85)
>
> at
> org.hibernate.tuple.entity.AbstractEntityTuplizer.instantiat e(AbstractEntityTuplizer.java:351)
>
> at
> org.hibernate.persister.entity.AbstractEntityPersister.insta ntiate(AbstractEntityPersister.java:3611)
>
> at org.hibernate.impl.SessionImpl.instantiate(SessionImpl.java: 1275)
> at org.hibernate.impl.SessionImpl.instantiate(SessionImpl.java: 1264)
> at org.hibernate.loader.Loader.instanceNotYetLoaded(Loader.java :1299)
> at org.hibernate.loader.Loader.getRow(Loader.java:1206)
> at org.hibernate.loader.Loader.getRowFromResultSet(Loader.java: 580)
> at org.hibernate.loader.Loader.doQuery(Loader.java:701)
> at
> org.hibernate.loader.Loader.doQueryAndInitializeNonLazyColle ctions(Loader.java:236)
>
> at org.hibernate.loader.Loader.loadCollection(Loader.java:1994)
> at
> org.hibernate.loader.collection.CollectionLoader.initialize( CollectionLoader.java:36)
>
> at
> org.hibernate.persister.collection.AbstractCollectionPersist er.initialize(AbstractCollectionPersister.java:565)
>
> at
> org.hibernate.event.def.DefaultInitializeCollectionEventList ener.onInitializeCollection(DefaultInitializeCollectionEvent Listener.java:63)
>
> at
> org.eclipse.emf.teneo.hibernate.mapping.EMFInitializeCollect ionEventListener.onInitializeCollection(EMFInitializeCollect ionEventListener.java:61)
>
> at
> org.hibernate.impl.SessionImpl.initializeCollection(SessionI mpl.java:1716)
> at
> org.hibernate.collection.AbstractPersistentCollection.initia lize(AbstractPersistentCollection.java:344)
>
> at
> org.hibernate.collection.AbstractPersistentCollection.read(A bstractPersistentCollection.java:86)
>
> at org.hibernate.collection.PersistentList.toArray(PersistentLi st.java:123)
> at
> org.eclipse.emf.teneo.hibernate.mapping.elist.HibernatePersi stableEList.doLoad(HibernatePersistableEList.java:138)
>
> at
> org.eclipse.emf.teneo.mapping.elist.PersistableEList.load(Pe rsistableEList.java:207)
>
> at
> org.eclipse.emf.teneo.mapping.elist.PersistableEList.delegat eSize(PersistableEList.java:443)
>
> at
> org.eclipse.emf.common.util.DelegatingEList.size(DelegatingE List.java:224)
> at
> org.eclipse.emf.common.util.DelegatingEList$EIterator.hasNex t(DelegatingEList.java:1050)
>
> at
> org.eclipse.emf.edit.provider.ItemProviderAdapter.getChildre n(ItemProviderAdapter.java:340)
>
> at
> org.eclipse.emf.edit.provider.ItemProviderAdapter.hasChildre n(ItemProviderAdapter.java:397)
>
> at
> org.eclipse.emf.edit.provider.ItemProviderAdapter.hasChildre n(ItemProviderAdapter.java:384)
>
> at
> org.eclipse.emf.edit.ui.provider.AdapterFactoryContentProvid er.hasChildren(AdapterFactoryContentProvider.java:198)
>
> at
> org.eclipse.jface.viewers.AbstractTreeViewer.isExpandable(Ab stractTreeViewer.java:2076)
>
> Bruno Ziswiler wrote:
>> Hi Martin
>>
>> Thanks for your quick answer. I entered the issue into Bugzilla
>> (#247256).
>>
>>
>> Regards
>> Bruno
>>
>>
>> Martin Taal wrote:
>>> Hi Bruno,
>>> If you enter a bugzilla I will do a fix right away and include it in a
>>> build which I will also do very quickly (same day). I don't have a
>>> quicker workaround at the moment.
>>>
>>> gr. Martin
>>>
>>> Bruno Ziswiler wrote:
>>>> Hi Martin
>>>>
>>>> I'm in the team with Luzi. Thanks for your kind reply. We will enter
>>>> the issue into bugzilla.
>>>>
>>>> Is the fix obvious to you? What would be a work-around so we are able
>>>> to proceed with our project?
>>>>
>>>>
>>>> Thanks,
>>>> Bruno
>>>>
>>>>
>>>> Martin Taal wrote:
>>>>> Hi Luzi,
>>>>> I tested this and this is indeed a bug. Can you enter a bugzilla for
>>>>> this? Then I will solve this in the next build.
>>>>>
>>>>> gr. Martin
>>>>>
>>>>> Luzi Anderegg wrote:
>>>>>> as a small addendum: I tried the same thing with the library
>>>>>> sample by
>>>>>> only generating implementation classes and the same assertion arises.
>>>>>>
>>>>>> Does Teneo incorporate the feature "suppress interfaces"?
>>>>>>
>>>>>> Thanks for any information
>>>>>> Luzi
>>>>>
>>>>>
>>>
>>>


--

With Regards, Martin Taal

Springsite/Elver.org
Office: Hardwareweg 4, 3821 BV Amersfoort
Postal: Nassaulaan 7, 3941 EC Doorn
The Netherlands
Cell: +31 (0)6 288 48 943
Tel: +31 (0)84 420 2397
Fax: +31 (0)84 225 9307
Mail: mtaal@springsite.com - mtaal@elver.org
Web: www.springsite.com - www.elver.org
Re: [Teneo] Implementation classes only [message #422844 is a reply to message #422832] Wed, 17 September 2008 07:53 Go to previous messageGo to next message
Eclipse UserFriend
Originally posted by: luzi.anderegg.ergon.ch

The class 'DataPoint' is actually only an interface. I cannot exactly
reconstruct how the code computes this class. I originally thought that
there could be a relation to the assertion failure.
Re: [Teneo] Implementation classes only [message #422845 is a reply to message #422844] Wed, 17 September 2008 08:05 Go to previous messageGo to next message
Martin Taal is currently offline Martin TaalFriend
Messages: 5468
Registered: July 2009
Senior Member
Hi Luzi,
The code in EcoreUtil uses an eClass (not a java Class). So I mean the eClass DataPoint not the
class DataPoint. Can you check what eClass is passed and why it can't find its own factory?

gr. Martin

Luzi Anderegg wrote:
> The class 'DataPoint' is actually only an interface. I cannot exactly
> reconstruct how the code computes this class. I originally thought that
> there could be a relation to the assertion failure.


--

With Regards, Martin Taal

Springsite/Elver.org
Office: Hardwareweg 4, 3821 BV Amersfoort
Postal: Nassaulaan 7, 3941 EC Doorn
The Netherlands
Cell: +31 (0)6 288 48 943
Tel: +31 (0)84 420 2397
Fax: +31 (0)84 225 9307
Mail: mtaal@springsite.com - mtaal@elver.org
Web: www.springsite.com - www.elver.org
Re: [Teneo] Implementation classes only [message #422850 is a reply to message #422845] Wed, 17 September 2008 08:58 Go to previous messageGo to next message
Eclipse UserFriend
Originally posted by: luzi.anderegg.ergon.ch

Sorry Martin, I meant that DataPoint is modelled in EMF as an interface
(set 'interface' property to true). Therefore, the factory has no case
in the switch statement for this eClass.


Martin Taal wrote:
> Hi Luzi,
> The code in EcoreUtil uses an eClass (not a java Class). So I mean the
> eClass DataPoint not the class DataPoint. Can you check what eClass is
> passed and why it can't find its own factory?
>
> gr. Martin
>
> Luzi Anderegg wrote:
>> The class 'DataPoint' is actually only an interface. I cannot exactly
>> reconstruct how the code computes this class. I originally thought
>> that there could be a relation to the assertion failure.
>
>
Re: [Teneo] Implementation classes only [message #422876 is a reply to message #422850] Wed, 17 September 2008 20:27 Go to previous messageGo to next message
Martin Taal is currently offline Martin TaalFriend
Messages: 5468
Registered: July 2009
Senior Member
Hi Luzi,
I tried to reproduce your case by adapting one of the testcases to contain a list of eclass with
interface=true and this worked fine for me.

Can it be possible that you changed the model by setting interface to true and then rerunned your
testcase on an existing database which had instances of the eclass which was changed to interface to
true? (guessing here...)

gr. Martin

Luzi Anderegg wrote:
> Sorry Martin, I meant that DataPoint is modelled in EMF as an interface
> (set 'interface' property to true). Therefore, the factory has no case
> in the switch statement for this eClass.
>
>
> Martin Taal wrote:
>> Hi Luzi,
>> The code in EcoreUtil uses an eClass (not a java Class). So I mean the
>> eClass DataPoint not the class DataPoint. Can you check what eClass is
>> passed and why it can't find its own factory?
>>
>> gr. Martin
>>
>> Luzi Anderegg wrote:
>>> The class 'DataPoint' is actually only an interface. I cannot exactly
>>> reconstruct how the code computes this class. I originally thought
>>> that there could be a relation to the assertion failure.
>>
>>


--

With Regards, Martin Taal

Springsite/Elver.org
Office: Hardwareweg 4, 3821 BV Amersfoort
Postal: Nassaulaan 7, 3941 EC Doorn
The Netherlands
Cell: +31 (0)6 288 48 943
Tel: +31 (0)84 420 2397
Fax: +31 (0)84 225 9307
Mail: mtaal@springsite.com - mtaal@elver.org
Web: www.springsite.com - www.elver.org
Re: [Teneo] Implementation classes only [message #422881 is a reply to message #422876] Wed, 17 September 2008 21:08 Go to previous messageGo to next message
luciano is currently offline lucianoFriend
Messages: 16
Registered: July 2009
Junior Member
Hi Martin,

> Hi Luzi,
> I tried to reproduce your case by adapting one of the testcases to contain a
list of eclass with
> interface=true and this worked fine for me.
In my case, it worked well for a quite a long time. The problems started
when when I introduced some more references from a new class.

> Can it be possible that you changed the model by setting interface to true
and then rerunned your
> testcase on an existing database which had instances of the eclass which was
changed to interface to
> true? (guessing here...)
No, I cleaned up the database. When I look into the database, all the
names seems to be correct. That's why. I thought some computation of the
mapping may be wrong.

Luzi
Re: [Teneo] Implementation classes only [message #422887 is a reply to message #422881] Wed, 17 September 2008 21:33 Go to previous message
Martin Taal is currently offline Martin TaalFriend
Messages: 5468
Registered: July 2009
Senior Member
Hi Luzi,
Can you send me the model and a small testcase? Then I can try it out myself.

gr. Martin

luciano wrote:
> Hi Martin,
>
>> Hi Luzi,
>> I tried to reproduce your case by adapting one of the testcases to
>> contain a
> list of eclass with
>> interface=true and this worked fine for me.
> In my case, it worked well for a quite a long time. The problems started
> when when I introduced some more references from a new class.
>> Can it be possible that you changed the model by setting interface to
>> true
> and then rerunned your
>> testcase on an existing database which had instances of the eclass
>> which was
> changed to interface to
>> true? (guessing here...)
> No, I cleaned up the database. When I look into the database, all the
> names seems to be correct. That's why. I thought some computation of the
> mapping may be wrong.
>
> Luzi
>


--

With Regards, Martin Taal

Springsite/Elver.org
Office: Hardwareweg 4, 3821 BV Amersfoort
Postal: Nassaulaan 7, 3941 EC Doorn
The Netherlands
Cell: +31 (0)6 288 48 943
Tel: +31 (0)84 420 2397
Fax: +31 (0)84 225 9307
Mail: mtaal@springsite.com - mtaal@elver.org
Web: www.springsite.com - www.elver.org
Previous Topic:eopposite on a map
Next Topic:Creating EMF model from XML schema - special characters - com.montages.xml.zip (1/1)
Goto Forum:
  


Current Time: Thu Mar 28 09:41:57 GMT 2024

Powered by FUDForum. Page generated in 0.04616 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.2.
Copyright ©2001-2010 FUDforum Bulletin Board Software

Back to the top