Home » Modeling » MDT (Model Development Tools) » [Announce] Papyrus component proposal
[Announce] Papyrus component proposal [message #378295] |
Tue, 06 May 2008 14:57  |
Eclipse User |
|
|
|
A proposal to create a new "Papyrus" component as part of the MDT subproject
has been posted to Eclipsepedia (see
http://wiki.eclipse.org/MDT-Papyrus-Proposal). Technical discussions about
the formation, scope, and direction of this new component will take place on
the eclipse.modeling.mdt newsgroup (please prefix the subject with
[Papyrus]). If you have comments or ideas, or interest in contributing to
the component, please join in the discussion!
Kenn
|
|
|
Re: [Announce] Papyrus component proposal [message #378627 is a reply to message #378295] |
Mon, 30 June 2008 20:54   |
Eclipse User |
|
|
|
Kenn Hussey wrote:
> A proposal to create a new "Papyrus" component as part of the MDT subproject
> has been posted to Eclipsepedia (see
> http://wiki.eclipse.org/MDT-Papyrus-Proposal). Technical discussions about
> the formation, scope, and direction of this new component will take place on
> the eclipse.modeling.mdt newsgroup (please prefix the subject with
> [Papyrus]). If you have comments or ideas, or interest in contributing to
> the component, please join in the discussion!
This sounds like an interesting proposal. I'm surprised it hasn't
sparked a single comment in two months. Did it die an early death?
If it's still active, I'd be interested in exploring collaboration
between ArgoEclipse and the new project.
Tom Morris
ArgoEclipse project lead
|
|
|
Re: [Announce] Papyrus component proposal [message #378628 is a reply to message #378627] |
Tue, 01 July 2008 12:51   |
Eclipse User |
|
|
|
Hi,
This proposal is still active and different groups are working together
to be able to deliver a first code base if the project is accepted.
The proposal want to create a large community to create and maintain a
complete UML environment for industrial uses so everybody is welcome in
the project.
I will add you as interested party in the proposal and I think one of
the project leader will contact the ArgoEclipse team soon.
Regards,
David Sciamma
Tom Morris a écrit :
> Kenn Hussey wrote:
>> A proposal to create a new "Papyrus" component as part of the MDT
>> subproject has been posted to Eclipsepedia (see
>> http://wiki.eclipse.org/MDT-Papyrus-Proposal). Technical discussions
>> about the formation, scope, and direction of this new component will
>> take place on the eclipse.modeling.mdt newsgroup (please prefix the
>> subject with [Papyrus]). If you have comments or ideas, or interest in
>> contributing to the component, please join in the discussion!
>
> This sounds like an interesting proposal. I'm surprised it hasn't
> sparked a single comment in two months. Did it die an early death?
>
> If it's still active, I'd be interested in exploring collaboration
> between ArgoEclipse and the new project.
>
> Tom Morris
> ArgoEclipse project lead
--
SCIAMMA David
Eclipse Technical Manager
Tel : +33(0)5 61 00 73 44
Fax : +33(0)5 61 00 51 46
New address
Anyware Technologies
Lake Park
ZAC de l'Hers - Allée du Lac
BP 87216
31672 Labège Cedex
France
http://www.anyware-tech.com
|
|
|
Re: [Announce] Papyrus component proposal [message #378629 is a reply to message #378628] |
Tue, 01 July 2008 14:06   |
Eclipse User |
|
|
|
Hi,
I am Sébastien Gérard, the leader of this project. I confirm what David
said: we are actively currently working on the code for the first code to
deliver that is scheduled for end of September. Feel free to contact me if
you want more information.
cheers,
Sébastien.
|
|
|
Re: [Announce] Papyrus component proposal [message #378630 is a reply to message #378627] |
Fri, 18 July 2008 13:54   |
Eclipse User |
|
|
|
Tom,
We will be conducting a vote by the MDT committers in the near future to
have this component created. Stay tuned.
Kenn
"Tom Morris" <tfmorris@gmail.com> wrote in message
news:g4bh5n$3jf$1@build.eclipse.org...
> Kenn Hussey wrote:
>> A proposal to create a new "Papyrus" component as part of the MDT
>> subproject has been posted to Eclipsepedia (see
>> http://wiki.eclipse.org/MDT-Papyrus-Proposal). Technical discussions
>> about the formation, scope, and direction of this new component will take
>> place on the eclipse.modeling.mdt newsgroup (please prefix the subject
>> with [Papyrus]). If you have comments or ideas, or interest in
>> contributing to the component, please join in the discussion!
>
> This sounds like an interesting proposal. I'm surprised it hasn't sparked
> a single comment in two months. Did it die an early death?
>
> If it's still active, I'd be interested in exploring collaboration between
> ArgoEclipse and the new project.
>
> Tom Morris
> ArgoEclipse project lead
|
|
|
Re: [Announce] Papyrus component proposal [message #378638 is a reply to message #378295] |
Wed, 13 August 2008 19:40   |
Eclipse User |
|
|
|
Hi
Looks interesting.
I would be very interested in seeing/helping the multipage component support a mixture
of textual (IMP-based) and graphical (GMF-based) views of EMF-defined models, so that
QVT 'programs' can be viewed and edited using a variety of representations.
Regards
Ed Willink
|
|
|
Re: [Announce] Papyrus component proposal [message #378860 is a reply to message #378295] |
Mon, 06 October 2008 17:35   |
Eclipse User |
|
|
|
Kenn,
Zeligsoft Inc. (http://www.zeligsoft.com) is interested in both the
MDT-Papyrus and MST (Model Specification Tools) sub-projects. We will
certainly follow the progress and contributions to these projects and we
are looking to being early adopters. Please feel free to add our company
as interested parties, where applicable.
Regards,
Jon
Kenn Hussey wrote:
> A proposal to create a new "Papyrus" component as part of the MDT subproject
> has been posted to Eclipsepedia (see
> http://wiki.eclipse.org/MDT-Papyrus-Proposal). Technical discussions about
> the formation, scope, and direction of this new component will take place on
> the eclipse.modeling.mdt newsgroup (please prefix the subject with
> [Papyrus]). If you have comments or ideas, or interest in contributing to
> the component, please join in the discussion!
>
> Kenn
>
>
|
|
|
Re: [Announce] Papyrus component proposal [message #378862 is a reply to message #378860] |
Wed, 08 October 2008 15:23   |
Eclipse User |
|
|
|
Thanks, Jon. I've added Zeligsoft as an interested party on both proposals.
Kenn
"Jon Corchis" <jcorchis@hotmail.com> wrote in message
news:gcdi9u$g21$1@build.eclipse.org...
> Kenn,
>
> Zeligsoft Inc. (http://www.zeligsoft.com) is interested in both the
> MDT-Papyrus and MST (Model Specification Tools) sub-projects. We will
> certainly follow the progress and contributions to these projects and we
> are looking to being early adopters. Please feel free to add our company
> as interested parties, where applicable.
>
> Regards,
>
> Jon
>
> Kenn Hussey wrote:
>> A proposal to create a new "Papyrus" component as part of the MDT
>> subproject has been posted to Eclipsepedia (see
>> http://wiki.eclipse.org/MDT-Papyrus-Proposal). Technical discussions
>> about the formation, scope, and direction of this new component will take
>> place on the eclipse.modeling.mdt newsgroup (please prefix the subject
>> with [Papyrus]). If you have comments or ideas, or interest in
>> contributing to the component, please join in the discussion!
>>
>> Kenn
|
|
|
Re: [Announce] Papyrus component proposal [message #378875 is a reply to message #378630] |
Thu, 16 October 2008 21:27   |
Eclipse User |
|
|
|
Kenn Hussey wrote:
> We will be conducting a vote by the MDT committers in the near future to
> have this component created. Stay tuned.
Any update on the status of the proposal?
The proposal gives a list of proposed package/plugin names. Is there a
mapping from the existing Papyrus/TopcaseD/whatever package names to the
new package names so that we can at least look at the existing code to
see what it looks like?
e.g. com.cea.papyrus.truc --> org.eclipse.papyrus.scribe.machin
The original proposal said that technical discussion was going to take
place in this newsgroup, but that's obviously not happening. Is there a
better forum to participate in? It's been years since I worked at
Sophia-Antipolis, so my French is a little rusty, but I should still be
able to manage French-only forums if that's necessary.
Tom
|
|
|
Re: [Announce] Papyrus component proposal [message #378877 is a reply to message #378875] |
Thu, 16 October 2008 23:54   |
Eclipse User |
|
|
|
Tom,
The component has been created (and announced to the membership) and is
mostly provisioned; I believe the team intended to post the initial code
contribution sometime in November (perhaps Sebastien can confirm). All
discussion related to this component should now take place on the Papyrus
newsgroup (eclipse.papyrus, copied) and developers' mailing list
(mdt-papyrus.dev).
Kenn
"Tom Morris" <tfmorris@gmail.com> wrote in message
news:gd8bka$ajn$1@build.eclipse.org...
> Kenn Hussey wrote:
>
>> We will be conducting a vote by the MDT committers in the near future to
>> have this component created. Stay tuned.
>
> Any update on the status of the proposal?
>
> The proposal gives a list of proposed package/plugin names. Is there a
> mapping from the existing Papyrus/TopcaseD/whatever package names to the
> new package names so that we can at least look at the existing code to see
> what it looks like?
>
> e.g. com.cea.papyrus.truc --> org.eclipse.papyrus.scribe.machin
>
> The original proposal said that technical discussion was going to take
> place in this newsgroup, but that's obviously not happening. Is there a
> better forum to participate in? It's been years since I worked at
> Sophia-Antipolis, so my French is a little rusty, but I should still be
> able to manage French-only forums if that's necessary.
>
> Tom
|
|
| |
Re: [Announce] Papyrus component proposal [message #593624 is a reply to message #378295] |
Mon, 30 June 2008 20:54  |
Eclipse User |
|
|
|
Kenn Hussey wrote:
> A proposal to create a new "Papyrus" component as part of the MDT subproject
> has been posted to Eclipsepedia (see
> http://wiki.eclipse.org/MDT-Papyrus-Proposal). Technical discussions about
> the formation, scope, and direction of this new component will take place on
> the eclipse.modeling.mdt newsgroup (please prefix the subject with
> [Papyrus]). If you have comments or ideas, or interest in contributing to
> the component, please join in the discussion!
This sounds like an interesting proposal. I'm surprised it hasn't
sparked a single comment in two months. Did it die an early death?
If it's still active, I'd be interested in exploring collaboration
between ArgoEclipse and the new project.
Tom Morris
ArgoEclipse project lead
|
|
|
Re: [Announce] Papyrus component proposal [message #593633 is a reply to message #378627] |
Tue, 01 July 2008 12:51  |
Eclipse User |
|
|
|
Hi,
This proposal is still active and different groups are working together
to be able to deliver a first code base if the project is accepted.
The proposal want to create a large community to create and maintain a
complete UML environment for industrial uses so everybody is welcome in
the project.
I will add you as interested party in the proposal and I think one of
the project leader will contact the ArgoEclipse team soon.
Regards,
David Sciamma
Tom Morris a écrit :
> Kenn Hussey wrote:
>> A proposal to create a new "Papyrus" component as part of the MDT
>> subproject has been posted to Eclipsepedia (see
>> http://wiki.eclipse.org/MDT-Papyrus-Proposal). Technical discussions
>> about the formation, scope, and direction of this new component will
>> take place on the eclipse.modeling.mdt newsgroup (please prefix the
>> subject with [Papyrus]). If you have comments or ideas, or interest in
>> contributing to the component, please join in the discussion!
>
> This sounds like an interesting proposal. I'm surprised it hasn't
> sparked a single comment in two months. Did it die an early death?
>
> If it's still active, I'd be interested in exploring collaboration
> between ArgoEclipse and the new project.
>
> Tom Morris
> ArgoEclipse project lead
--
SCIAMMA David
Eclipse Technical Manager
Tel : +33(0)5 61 00 73 44
Fax : +33(0)5 61 00 51 46
New address
Anyware Technologies
Lake Park
ZAC de l'Hers - Allée du Lac
BP 87216
31672 Labège Cedex
France
http://www.anyware-tech.com
|
|
|
Re: [Announce] Papyrus component proposal [message #593644 is a reply to message #378628] |
Tue, 01 July 2008 14:06  |
Eclipse User |
|
|
|
Hi,
I am Sébastien Gérard, the leader of this project. I confirm what David
said: we are actively currently working on the code for the first code to
deliver that is scheduled for end of September. Feel free to contact me if
you want more information.
cheers,
Sébastien.
|
|
|
Re: [Announce] Papyrus component proposal [message #593655 is a reply to message #378627] |
Fri, 18 July 2008 13:54  |
Eclipse User |
|
|
|
Tom,
We will be conducting a vote by the MDT committers in the near future to
have this component created. Stay tuned.
Kenn
"Tom Morris" <tfmorris@gmail.com> wrote in message
news:g4bh5n$3jf$1@build.eclipse.org...
> Kenn Hussey wrote:
>> A proposal to create a new "Papyrus" component as part of the MDT
>> subproject has been posted to Eclipsepedia (see
>> http://wiki.eclipse.org/MDT-Papyrus-Proposal). Technical discussions
>> about the formation, scope, and direction of this new component will take
>> place on the eclipse.modeling.mdt newsgroup (please prefix the subject
>> with [Papyrus]). If you have comments or ideas, or interest in
>> contributing to the component, please join in the discussion!
>
> This sounds like an interesting proposal. I'm surprised it hasn't sparked
> a single comment in two months. Did it die an early death?
>
> If it's still active, I'd be interested in exploring collaboration between
> ArgoEclipse and the new project.
>
> Tom Morris
> ArgoEclipse project lead
|
|
|
Re: [Announce] Papyrus component proposal [message #593786 is a reply to message #378295] |
Wed, 13 August 2008 19:40  |
Eclipse User |
|
|
|
Hi
Looks interesting.
I would be very interested in seeing/helping the multipage component support a mixture
of textual (IMP-based) and graphical (GMF-based) views of EMF-defined models, so that
QVT 'programs' can be viewed and edited using a variety of representations.
Regards
Ed Willink
|
|
|
Re: [Announce] Papyrus component proposal [message #593917 is a reply to message #378295] |
Mon, 06 October 2008 17:35  |
Eclipse User |
|
|
|
Kenn,
Zeligsoft Inc. (http://www.zeligsoft.com) is interested in both the
MDT-Papyrus and MST (Model Specification Tools) sub-projects. We will
certainly follow the progress and contributions to these projects and we
are looking to being early adopters. Please feel free to add our company
as interested parties, where applicable.
Regards,
Jon
Kenn Hussey wrote:
> A proposal to create a new "Papyrus" component as part of the MDT subproject
> has been posted to Eclipsepedia (see
> http://wiki.eclipse.org/MDT-Papyrus-Proposal). Technical discussions about
> the formation, scope, and direction of this new component will take place on
> the eclipse.modeling.mdt newsgroup (please prefix the subject with
> [Papyrus]). If you have comments or ideas, or interest in contributing to
> the component, please join in the discussion!
>
> Kenn
>
>
|
|
|
Re: [Announce] Papyrus component proposal [message #593930 is a reply to message #378860] |
Wed, 08 October 2008 15:23  |
Eclipse User |
|
|
|
Thanks, Jon. I've added Zeligsoft as an interested party on both proposals.
Kenn
"Jon Corchis" <jcorchis@hotmail.com> wrote in message
news:gcdi9u$g21$1@build.eclipse.org...
> Kenn,
>
> Zeligsoft Inc. (http://www.zeligsoft.com) is interested in both the
> MDT-Papyrus and MST (Model Specification Tools) sub-projects. We will
> certainly follow the progress and contributions to these projects and we
> are looking to being early adopters. Please feel free to add our company
> as interested parties, where applicable.
>
> Regards,
>
> Jon
>
> Kenn Hussey wrote:
>> A proposal to create a new "Papyrus" component as part of the MDT
>> subproject has been posted to Eclipsepedia (see
>> http://wiki.eclipse.org/MDT-Papyrus-Proposal). Technical discussions
>> about the formation, scope, and direction of this new component will take
>> place on the eclipse.modeling.mdt newsgroup (please prefix the subject
>> with [Papyrus]). If you have comments or ideas, or interest in
>> contributing to the component, please join in the discussion!
>>
>> Kenn
|
|
|
Re: [Announce] Papyrus component proposal [message #593998 is a reply to message #378630] |
Thu, 16 October 2008 21:27  |
Eclipse User |
|
|
|
Kenn Hussey wrote:
> We will be conducting a vote by the MDT committers in the near future to
> have this component created. Stay tuned.
Any update on the status of the proposal?
The proposal gives a list of proposed package/plugin names. Is there a
mapping from the existing Papyrus/TopcaseD/whatever package names to the
new package names so that we can at least look at the existing code to
see what it looks like?
e.g. com.cea.papyrus.truc --> org.eclipse.papyrus.scribe.machin
The original proposal said that technical discussion was going to take
place in this newsgroup, but that's obviously not happening. Is there a
better forum to participate in? It's been years since I worked at
Sophia-Antipolis, so my French is a little rusty, but I should still be
able to manage French-only forums if that's necessary.
Tom
|
|
|
Re: [Announce] Papyrus component proposal [message #594010 is a reply to message #378875] |
Thu, 16 October 2008 23:54  |
Eclipse User |
|
|
|
Tom,
The component has been created (and announced to the membership) and is
mostly provisioned; I believe the team intended to post the initial code
contribution sometime in November (perhaps Sebastien can confirm). All
discussion related to this component should now take place on the Papyrus
newsgroup (eclipse.papyrus, copied) and developers' mailing list
(mdt-papyrus.dev).
Kenn
"Tom Morris" <tfmorris@gmail.com> wrote in message
news:gd8bka$ajn$1@build.eclipse.org...
> Kenn Hussey wrote:
>
>> We will be conducting a vote by the MDT committers in the near future to
>> have this component created. Stay tuned.
>
> Any update on the status of the proposal?
>
> The proposal gives a list of proposed package/plugin names. Is there a
> mapping from the existing Papyrus/TopcaseD/whatever package names to the
> new package names so that we can at least look at the existing code to see
> what it looks like?
>
> e.g. com.cea.papyrus.truc --> org.eclipse.papyrus.scribe.machin
>
> The original proposal said that technical discussion was going to take
> place in this newsgroup, but that's obviously not happening. Is there a
> better forum to participate in? It's been years since I worked at
> Sophia-Antipolis, so my French is a little rusty, but I should still be
> able to manage French-only forums if that's necessary.
>
> Tom
|
|
| |
Goto Forum:
Current Time: Wed Feb 19 19:39:02 GMT 2025
Powered by FUDForum. Page generated in 0.34398 seconds
|