Home » Eclipse Projects » DTP » Define a data source with external parameters
| |
| Re: Define a data source with external parameters [message #40054 is a reply to message #38352] |
Wed, 19 December 2007 16:52   |
Eclipse User |
|
|
|
Originally posted by: brianf.sybase.com
Hi Antoine...
This seems like an interesting use case. Can you provide more details about
it?
So you'd have a file or something in the project properties that would
define the connection information for a database connection, and then would
like a custom connection profile to see those properties and add a
connection profile to the data source explorer?
This might be tricky, but I can see one possibility would be to have a way
to map a file or set of properties to an exported connection profile file
(which is just XML) and that would allow you to then import that export
profile into the DSE so it shows up.
The only issue I see is that the connection profile cache is
workspace-relative, not project-relative. But there may be ways around this
by creating some sort of project-relative profile repository that would read
the data from the project properties and handle it.
Can you provide more details so we have more information to work with?
Perhaps specifics about what the properties would look like in the project
and the expected behavior?
Thanks in advance. Sorry for the delay in getting back to you.
--Fitz
-------------------------------------------
Brian Fitzpatrick (aka "Fitz")
Sr. Software Engineer/DTP Committer
Sybase, Inc.
"Antoine Toulme" <atoulme@intalio.com> wrote in message
news:fgrunq$k97$1@build.eclipse.org...
> Hi,,
> no answer so far, should I raise an enhancement request ?
>
> Thanks,
>
> Antoine
>
> Antoine Toulme wrote:
>> Hi all,
>>
>> we would like to use DTP in our product, and define a datasource using
>> parameters defined elsewhere in the project properties. This datasource
>> would then appear by default when opening the data explorer view.
>>
>> Is this feasible ?
>>
>> Thanks,
>>
>> Antoine
>
>
> --
> Intalio, the Open Source BPMS Company
>
> <a href="http://www.intalio.com">http://www.intalio.com</a>
> <a href="http://bpms.intalio.com">Community website</a>
|
|
|
| Re: Define a data source with external parameters [message #40146 is a reply to message #40054] |
Thu, 20 December 2007 13:12 |
| Eclipse User |
|
|
|
Originally posted by: atoulme.intalio.com
Hi Brian,
I had lost track of this issue and didn't open a Bugzilla entry for it.
I think the settings could be saved on a preference store per project.
Let's continue this discussion on Bugzilla, it will be a bit easier to
track down :).
Thanks for replying!
Antoine
Brian Fitzpatrick wrote:
> Hi Antoine...
>
> This seems like an interesting use case. Can you provide more details about
> it?
>
> So you'd have a file or something in the project properties that would
> define the connection information for a database connection, and then would
> like a custom connection profile to see those properties and add a
> connection profile to the data source explorer?
>
> This might be tricky, but I can see one possibility would be to have a way
> to map a file or set of properties to an exported connection profile file
> (which is just XML) and that would allow you to then import that export
> profile into the DSE so it shows up.
>
> The only issue I see is that the connection profile cache is
> workspace-relative, not project-relative. But there may be ways around this
> by creating some sort of project-relative profile repository that would read
> the data from the project properties and handle it.
>
> Can you provide more details so we have more information to work with?
> Perhaps specifics about what the properties would look like in the project
> and the expected behavior?
>
> Thanks in advance. Sorry for the delay in getting back to you.
> --Fitz
> -------------------------------------------
> Brian Fitzpatrick (aka "Fitz")
> Sr. Software Engineer/DTP Committer
> Sybase, Inc.
>
> "Antoine Toulme" <atoulme@intalio.com> wrote in message
> news:fgrunq$k97$1@build.eclipse.org...
>> Hi,,
>> no answer so far, should I raise an enhancement request ?
>>
>> Thanks,
>>
>> Antoine
>>
>> Antoine Toulme wrote:
>>> Hi all,
>>>
>>> we would like to use DTP in our product, and define a datasource using
>>> parameters defined elsewhere in the project properties. This datasource
>>> would then appear by default when opening the data explorer view.
>>>
>>> Is this feasible ?
>>>
>>> Thanks,
>>>
>>> Antoine
>>
>> --
>> Intalio, the Open Source BPMS Company
>>
>> <a href="http://www.intalio.com">http://www.intalio.com</a>
>> <a href="http://bpms.intalio.com">Community website</a>
>
>
--
Intalio, the Open Source BPMS Company
<a href="http://www.intalio.com">http://www.intalio.com</a>
<a href="http://bpms.intalio.com">Community website</a>
|
|
|
| Re: Define a data source with external parameters [message #40177 is a reply to message #40054] |
Thu, 20 December 2007 13:17 |
| Eclipse User |
|
|
|
Originally posted by: atoulme.intalio.com
Please follow this bug:
https://bugs.eclipse.org/bugs/show_bug.cgi?id=213584
Regards,
Antoine
Brian Fitzpatrick wrote:
> Hi Antoine...
>
> This seems like an interesting use case. Can you provide more details about
> it?
>
> So you'd have a file or something in the project properties that would
> define the connection information for a database connection, and then would
> like a custom connection profile to see those properties and add a
> connection profile to the data source explorer?
>
> This might be tricky, but I can see one possibility would be to have a way
> to map a file or set of properties to an exported connection profile file
> (which is just XML) and that would allow you to then import that export
> profile into the DSE so it shows up.
>
> The only issue I see is that the connection profile cache is
> workspace-relative, not project-relative. But there may be ways around this
> by creating some sort of project-relative profile repository that would read
> the data from the project properties and handle it.
>
> Can you provide more details so we have more information to work with?
> Perhaps specifics about what the properties would look like in the project
> and the expected behavior?
>
> Thanks in advance. Sorry for the delay in getting back to you.
> --Fitz
> -------------------------------------------
> Brian Fitzpatrick (aka "Fitz")
> Sr. Software Engineer/DTP Committer
> Sybase, Inc.
>
> "Antoine Toulme" <atoulme@intalio.com> wrote in message
> news:fgrunq$k97$1@build.eclipse.org...
>> Hi,,
>> no answer so far, should I raise an enhancement request ?
>>
>> Thanks,
>>
>> Antoine
>>
>> Antoine Toulme wrote:
>>> Hi all,
>>>
>>> we would like to use DTP in our product, and define a datasource using
>>> parameters defined elsewhere in the project properties. This datasource
>>> would then appear by default when opening the data explorer view.
>>>
>>> Is this feasible ?
>>>
>>> Thanks,
>>>
>>> Antoine
>>
>> --
>> Intalio, the Open Source BPMS Company
>>
>> <a href="http://www.intalio.com">http://www.intalio.com</a>
>> <a href="http://bpms.intalio.com">Community website</a>
>
>
--
Intalio, the Open Source BPMS Company
<a href="http://www.intalio.com">http://www.intalio.com</a>
<a href="http://bpms.intalio.com">Community website</a>
|
|
|
| Re: Define a data source with external parameters [message #40198 is a reply to message #40177] |
Thu, 20 December 2007 15:07 |
| Eclipse User |
|
|
|
Originally posted by: brianf.sybase.com
Okey dokey. I've gone ahead and added some comments to your BZ entry to get
the ball rolling. :)
"Antoine Toulme" <atoulme@intalio.com> wrote in message
news:fkdq16$jd5$2@build.eclipse.org...
> Please follow this bug:
> https://bugs.eclipse.org/bugs/show_bug.cgi?id=213584
>
>
> Regards,
>
> Antoine
>
> Brian Fitzpatrick wrote:
>> Hi Antoine...
>>
>> This seems like an interesting use case. Can you provide more details
>> about it?
>>
>> So you'd have a file or something in the project properties that would
>> define the connection information for a database connection, and then
>> would like a custom connection profile to see those properties and add a
>> connection profile to the data source explorer?
>>
>> This might be tricky, but I can see one possibility would be to have a
>> way to map a file or set of properties to an exported connection profile
>> file (which is just XML) and that would allow you to then import that
>> export profile into the DSE so it shows up.
>>
>> The only issue I see is that the connection profile cache is
>> workspace-relative, not project-relative. But there may be ways around
>> this by creating some sort of project-relative profile repository that
>> would read the data from the project properties and handle it.
>>
>> Can you provide more details so we have more information to work with?
>> Perhaps specifics about what the properties would look like in the
>> project and the expected behavior?
>>
>> Thanks in advance. Sorry for the delay in getting back to you.
>> --Fitz
>> -------------------------------------------
>> Brian Fitzpatrick (aka "Fitz")
>> Sr. Software Engineer/DTP Committer
>> Sybase, Inc.
>>
>> "Antoine Toulme" <atoulme@intalio.com> wrote in message
>> news:fgrunq$k97$1@build.eclipse.org...
>>> Hi,,
>>> no answer so far, should I raise an enhancement request ?
>>>
>>> Thanks,
>>>
>>> Antoine
>>>
>>> Antoine Toulme wrote:
>>>> Hi all,
>>>>
>>>> we would like to use DTP in our product, and define a datasource using
>>>> parameters defined elsewhere in the project properties. This datasource
>>>> would then appear by default when opening the data explorer view.
>>>>
>>>> Is this feasible ?
>>>>
>>>> Thanks,
>>>>
>>>> Antoine
>>>
>>> --
>>> Intalio, the Open Source BPMS Company
>>>
>>> <a href="http://www.intalio.com">http://www.intalio.com</a>
>>> <a href="http://bpms.intalio.com">Community website</a>
>>
>>
>
>
> --
> Intalio, the Open Source BPMS Company
>
> <a href="http://www.intalio.com">http://www.intalio.com</a>
> <a href="http://bpms.intalio.com">Community website</a>
|
|
| |
| Re: Define a data source with external parameters [message #589415 is a reply to message #38352] |
Wed, 19 December 2007 16:52 |
 Brian Fitzpatrick
Messages: 500
Registered: July 2009 |
Senior Member |
|
|
Hi Antoine...
This seems like an interesting use case. Can you provide more details about
it?
So you'd have a file or something in the project properties that would
define the connection information for a database connection, and then would
like a custom connection profile to see those properties and add a
connection profile to the data source explorer?
This might be tricky, but I can see one possibility would be to have a way
to map a file or set of properties to an exported connection profile file
(which is just XML) and that would allow you to then import that export
profile into the DSE so it shows up.
The only issue I see is that the connection profile cache is
workspace-relative, not project-relative. But there may be ways around this
by creating some sort of project-relative profile repository that would read
the data from the project properties and handle it.
Can you provide more details so we have more information to work with?
Perhaps specifics about what the properties would look like in the project
and the expected behavior?
Thanks in advance. Sorry for the delay in getting back to you.
--Fitz
-------------------------------------------
Brian Fitzpatrick (aka "Fitz")
Sr. Software Engineer/DTP Committer
Sybase, Inc.
"Antoine Toulme" <atoulme@intalio.com> wrote in message
news:fgrunq$k97$1@build.eclipse.org...
> Hi,,
> no answer so far, should I raise an enhancement request ?
>
> Thanks,
>
> Antoine
>
> Antoine Toulme wrote:
>> Hi all,
>>
>> we would like to use DTP in our product, and define a datasource using
>> parameters defined elsewhere in the project properties. This datasource
>> would then appear by default when opening the data explorer view.
>>
>> Is this feasible ?
>>
>> Thanks,
>>
>> Antoine
>
>
> --
> Intalio, the Open Source BPMS Company
>
> <a href="http://www.intalio.com">http://www.intalio.com</a>
> <a href="http://bpms.intalio.com">Community website</a>
|
|
|
| Re: Define a data source with external parameters [message #589444 is a reply to message #40054] |
Thu, 20 December 2007 13:12 |
| Eclipse User |
|
|
|
Originally posted by: atoulme.intalio.com
Hi Brian,
I had lost track of this issue and didn't open a Bugzilla entry for it.
I think the settings could be saved on a preference store per project.
Let's continue this discussion on Bugzilla, it will be a bit easier to
track down :).
Thanks for replying!
Antoine
Brian Fitzpatrick wrote:
> Hi Antoine...
>
> This seems like an interesting use case. Can you provide more details about
> it?
>
> So you'd have a file or something in the project properties that would
> define the connection information for a database connection, and then would
> like a custom connection profile to see those properties and add a
> connection profile to the data source explorer?
>
> This might be tricky, but I can see one possibility would be to have a way
> to map a file or set of properties to an exported connection profile file
> (which is just XML) and that would allow you to then import that export
> profile into the DSE so it shows up.
>
> The only issue I see is that the connection profile cache is
> workspace-relative, not project-relative. But there may be ways around this
> by creating some sort of project-relative profile repository that would read
> the data from the project properties and handle it.
>
> Can you provide more details so we have more information to work with?
> Perhaps specifics about what the properties would look like in the project
> and the expected behavior?
>
> Thanks in advance. Sorry for the delay in getting back to you.
> --Fitz
> -------------------------------------------
> Brian Fitzpatrick (aka "Fitz")
> Sr. Software Engineer/DTP Committer
> Sybase, Inc.
>
> "Antoine Toulme" <atoulme@intalio.com> wrote in message
> news:fgrunq$k97$1@build.eclipse.org...
>> Hi,,
>> no answer so far, should I raise an enhancement request ?
>>
>> Thanks,
>>
>> Antoine
>>
>> Antoine Toulme wrote:
>>> Hi all,
>>>
>>> we would like to use DTP in our product, and define a datasource using
>>> parameters defined elsewhere in the project properties. This datasource
>>> would then appear by default when opening the data explorer view.
>>>
>>> Is this feasible ?
>>>
>>> Thanks,
>>>
>>> Antoine
>>
>> --
>> Intalio, the Open Source BPMS Company
>>
>> <a href="http://www.intalio.com">http://www.intalio.com</a>
>> <a href="http://bpms.intalio.com">Community website</a>
>
>
--
Intalio, the Open Source BPMS Company
<a href="http://www.intalio.com">http://www.intalio.com</a>
<a href="http://bpms.intalio.com">Community website</a>
|
|
|
| Re: Define a data source with external parameters [message #589454 is a reply to message #40054] |
Thu, 20 December 2007 13:17 |
| Eclipse User |
|
|
|
Originally posted by: atoulme.intalio.com
Please follow this bug:
https://bugs.eclipse.org/bugs/show_bug.cgi?id=213584
Regards,
Antoine
Brian Fitzpatrick wrote:
> Hi Antoine...
>
> This seems like an interesting use case. Can you provide more details about
> it?
>
> So you'd have a file or something in the project properties that would
> define the connection information for a database connection, and then would
> like a custom connection profile to see those properties and add a
> connection profile to the data source explorer?
>
> This might be tricky, but I can see one possibility would be to have a way
> to map a file or set of properties to an exported connection profile file
> (which is just XML) and that would allow you to then import that export
> profile into the DSE so it shows up.
>
> The only issue I see is that the connection profile cache is
> workspace-relative, not project-relative. But there may be ways around this
> by creating some sort of project-relative profile repository that would read
> the data from the project properties and handle it.
>
> Can you provide more details so we have more information to work with?
> Perhaps specifics about what the properties would look like in the project
> and the expected behavior?
>
> Thanks in advance. Sorry for the delay in getting back to you.
> --Fitz
> -------------------------------------------
> Brian Fitzpatrick (aka "Fitz")
> Sr. Software Engineer/DTP Committer
> Sybase, Inc.
>
> "Antoine Toulme" <atoulme@intalio.com> wrote in message
> news:fgrunq$k97$1@build.eclipse.org...
>> Hi,,
>> no answer so far, should I raise an enhancement request ?
>>
>> Thanks,
>>
>> Antoine
>>
>> Antoine Toulme wrote:
>>> Hi all,
>>>
>>> we would like to use DTP in our product, and define a datasource using
>>> parameters defined elsewhere in the project properties. This datasource
>>> would then appear by default when opening the data explorer view.
>>>
>>> Is this feasible ?
>>>
>>> Thanks,
>>>
>>> Antoine
>>
>> --
>> Intalio, the Open Source BPMS Company
>>
>> <a href="http://www.intalio.com">http://www.intalio.com</a>
>> <a href="http://bpms.intalio.com">Community website</a>
>
>
--
Intalio, the Open Source BPMS Company
<a href="http://www.intalio.com">http://www.intalio.com</a>
<a href="http://bpms.intalio.com">Community website</a>
|
|
|
| Re: Define a data source with external parameters [message #589461 is a reply to message #40177] |
Thu, 20 December 2007 15:07 |
Brian Fitzpatrick
Messages: 500
Registered: July 2009 |
Senior Member |
|
|
Okey dokey. I've gone ahead and added some comments to your BZ entry to get
the ball rolling. :)
"Antoine Toulme" <atoulme@intalio.com> wrote in message
news:fkdq16$jd5$2@build.eclipse.org...
> Please follow this bug:
> https://bugs.eclipse.org/bugs/show_bug.cgi?id=213584
>
>
> Regards,
>
> Antoine
>
> Brian Fitzpatrick wrote:
>> Hi Antoine...
>>
>> This seems like an interesting use case. Can you provide more details
>> about it?
>>
>> So you'd have a file or something in the project properties that would
>> define the connection information for a database connection, and then
>> would like a custom connection profile to see those properties and add a
>> connection profile to the data source explorer?
>>
>> This might be tricky, but I can see one possibility would be to have a
>> way to map a file or set of properties to an exported connection profile
>> file (which is just XML) and that would allow you to then import that
>> export profile into the DSE so it shows up.
>>
>> The only issue I see is that the connection profile cache is
>> workspace-relative, not project-relative. But there may be ways around
>> this by creating some sort of project-relative profile repository that
>> would read the data from the project properties and handle it.
>>
>> Can you provide more details so we have more information to work with?
>> Perhaps specifics about what the properties would look like in the
>> project and the expected behavior?
>>
>> Thanks in advance. Sorry for the delay in getting back to you.
>> --Fitz
>> -------------------------------------------
>> Brian Fitzpatrick (aka "Fitz")
>> Sr. Software Engineer/DTP Committer
>> Sybase, Inc.
>>
>> "Antoine Toulme" <atoulme@intalio.com> wrote in message
>> news:fgrunq$k97$1@build.eclipse.org...
>>> Hi,,
>>> no answer so far, should I raise an enhancement request ?
>>>
>>> Thanks,
>>>
>>> Antoine
>>>
>>> Antoine Toulme wrote:
>>>> Hi all,
>>>>
>>>> we would like to use DTP in our product, and define a datasource using
>>>> parameters defined elsewhere in the project properties. This datasource
>>>> would then appear by default when opening the data explorer view.
>>>>
>>>> Is this feasible ?
>>>>
>>>> Thanks,
>>>>
>>>> Antoine
>>>
>>> --
>>> Intalio, the Open Source BPMS Company
>>>
>>> <a href="http://www.intalio.com">http://www.intalio.com</a>
>>> <a href="http://bpms.intalio.com">Community website</a>
>>
>>
>
>
> --
> Intalio, the Open Source BPMS Company
>
> <a href="http://www.intalio.com">http://www.intalio.com</a>
> <a href="http://bpms.intalio.com">Community website</a>
|
|
|
Goto Forum:
Current Time: Fri Apr 19 11:10:09 GMT 2024
Powered by FUDForum. Page generated in 0.02862 seconds |
] 
Search
Help
Register
Login
Home
