Home » Language IDEs » AspectJ » Cannot create an aspect in Eclipse
Cannot create an aspect in Eclipse [message #37618] |
Thu, 24 June 2004 11:40 |
Eclipse User |
|
|
|
Originally posted by: fintan.conway.esb.ie
Hi All,
I have downloaded the aspect12.jar and manually installed in Eclipse 3.0
RC2.
I am trying to follow the help that was installed, but I cannot add an
aspect. I have created the AspectJ project, but when I try File -> New ->
Aspect, there is NO option for Aspect.
What can I do?
Many thanks for your help,
Fintan
|
|
|
Re: Cannot create an aspect in Eclipse [message #37645 is a reply to message #37618] |
Thu, 24 June 2004 12:20 |
George Harley Messages: 70 Registered: July 2009 |
Member |
|
|
Hi Fintan,
To the best of my knowledge there is no version yet of AJDT that will
work in RC2. According to the AJDT download page
( http://dev.eclipse.org/viewcvs/indextech.cgi/~checkout~/org. eclipse.ajdt/download.html)
the most recent release of AJDT, 1.1.10, only works up to Eclipse 3.0
M9. Unless you absolutely must work on the latest Eclipse RC then that
is what I would recommend.
AJDT 1.1.11, which will work on Eclipse RC3, is due out any day now...
Best regards,
George
Fintan wrote:
> Hi All,
>
> I have downloaded the aspect12.jar and manually installed in Eclipse 3.0
> RC2.
>
> I am trying to follow the help that was installed, but I cannot add an
> aspect. I have created the AspectJ project, but when I try File -> New ->
> Aspect, there is NO option for Aspect.
>
> What can I do?
>
> Many thanks for your help,
>
> Fintan
>
>
>
|
|
|
Re: Cannot create an aspect in Eclipse [message #37683 is a reply to message #37645] |
Thu, 24 June 2004 13:47 |
George Harley Messages: 70 Registered: July 2009 |
Member |
|
|
Hi again,
Update on my previous note. I've double checked and apparently AJDT
1.1.10 *should* work alright on Eclipse 3.0. That'll teach me to post in
haste.
So, returning back to your original post Fintan, can you confirm that it
was AJDT 1.1.10 that you were using. You refer to "aspect12.jar" and I
am not terribly sure what that means...
Best regards,
George
George Harley wrote:
> Hi Fintan,
>
> To the best of my knowledge there is no version yet of AJDT that will
> work in RC2. According to the AJDT download page
> ( http://dev.eclipse.org/viewcvs/indextech.cgi/~checkout~/org. eclipse.ajdt/download.html)
>
> the most recent release of AJDT, 1.1.10, only works up to Eclipse 3.0
> M9. Unless you absolutely must work on the latest Eclipse RC then that
> is what I would recommend.
>
> AJDT 1.1.11, which will work on Eclipse RC3, is due out any day now...
>
> Best regards,
> George
>
> Fintan wrote:
>
>> Hi All,
>>
>> I have downloaded the aspect12.jar and manually installed in Eclipse 3.0
>> RC2.
>>
>> I am trying to follow the help that was installed, but I cannot add an
>> aspect. I have created the AspectJ project, but when I try File ->
>> New ->
>> Aspect, there is NO option for Aspect.
>>
>> What can I do?
>>
>> Many thanks for your help,
>>
>> Fintan
>>
>>
>>
|
|
|
Re: Cannot create an aspect in Eclipse [message #37771 is a reply to message #37683] |
Wed, 30 June 2004 00:21 |
Alessandro Fragnani Messages: 16 Registered: July 2009 |
Junior Member |
|
|
Hi George and Fintan,
I´m having a problem with AJDT and Eclipse v3 RC 3 also. I have
downloaded usint the "Help / Software Update" option.
It appears to be installed fine. It appears on the "About Box", and the
"AspectJ Project" is on the "File / New / Project", but when I select it
and click next, I receive a error:
"The selected wizard could not be started. Reason: Plug-in
org.eclipse.ajdt.ui was unable to load class
org.eclipse.ajdt.internal.ui.wizards.AspectJProjectWizard"
On my plugins folder I have "org.eclipse.ajdt.ui_0.6.4" and
"org.eclipse.aspectj_1.1.4".
Any ideas?
Thanks in advance
Alessandro
George Harley wrote:
> Hi again,
>
> Update on my previous note. I've double checked and apparently AJDT
> 1.1.10 *should* work alright on Eclipse 3.0. That'll teach me to post in
> haste.
>
> So, returning back to your original post Fintan, can you confirm that it
> was AJDT 1.1.10 that you were using. You refer to "aspect12.jar" and I
> am not terribly sure what that means...
>
> Best regards,
> George
>
> George Harley wrote:
>
>> Hi Fintan,
>>
>> To the best of my knowledge there is no version yet of AJDT that will
>> work in RC2. According to the AJDT download page
>> ( http://dev.eclipse.org/viewcvs/indextech.cgi/~checkout~/org. eclipse.ajdt/download.html)
>>
>> the most recent release of AJDT, 1.1.10, only works up to Eclipse 3.0
>> M9. Unless you absolutely must work on the latest Eclipse RC then that
>> is what I would recommend.
>>
>> AJDT 1.1.11, which will work on Eclipse RC3, is due out any day now...
>>
>> Best regards,
>> George
>>
>> Fintan wrote:
>>
>>> Hi All,
>>>
>>> I have downloaded the aspect12.jar and manually installed in Eclipse 3.0
>>> RC2.
>>>
>>> I am trying to follow the help that was installed, but I cannot add an
>>> aspect. I have created the AspectJ project, but when I try File ->
>>> New ->
>>> Aspect, there is NO option for Aspect.
>>>
>>> What can I do?
>>>
>>> Many thanks for your help,
>>>
>>> Fintan
>>>
>>>
>>>
|
|
|
Re: Cannot create an aspect in Eclipse [message #37804 is a reply to message #37771] |
Wed, 30 June 2004 10:14 |
George Harley Messages: 70 Registered: July 2009 |
Member |
|
|
Hi Alessandro,
It sounds to me like you *might* have the wrong version of AJDT
installed in your Eclipse 3.0. If you have installed AJDT 1.1.10 then in
your plugins folder you should be seeing "org.eclipse.ajdt.ui_0.6.10"
and "org.eclipse.aspectj_1.1.10" rather than the entries you list in
your note. Please can you confirm the update site URL that you used when
installing. For AJDT 1.1.10 it should be
http://download.eclipse.org/technology/ajdt/30M8/update
The list of all AJDT update site URLs is given in the project download
page here
http://dev.eclipse.org/viewcvs/indextech.cgi/~checkout~/org. eclipse.ajdt/download.html
Best regards,
George
Alessandro Fragnani wrote:
> Hi George and Fintan,
>
> I´m having a problem with AJDT and Eclipse v3 RC 3 also. I have
> downloaded usint the "Help / Software Update" option.
>
> It appears to be installed fine. It appears on the "About Box", and the
> "AspectJ Project" is on the "File / New / Project", but when I select it
> and click next, I receive a error:
>
> "The selected wizard could not be started. Reason: Plug-in
> org.eclipse.ajdt.ui was unable to load class
> org.eclipse.ajdt.internal.ui.wizards.AspectJProjectWizard"
>
> On my plugins folder I have "org.eclipse.ajdt.ui_0.6.4" and
> "org.eclipse.aspectj_1.1.4".
>
> Any ideas?
>
> Thanks in advance
>
> Alessandro
>
> George Harley wrote:
>
>> Hi again,
>>
>> Update on my previous note. I've double checked and apparently AJDT
>> 1.1.10 *should* work alright on Eclipse 3.0. That'll teach me to post
>> in haste.
>>
>> So, returning back to your original post Fintan, can you confirm that
>> it was AJDT 1.1.10 that you were using. You refer to "aspect12.jar"
>> and I am not terribly sure what that means...
>>
>> Best regards,
>> George
>>
>> George Harley wrote:
>>
>>> Hi Fintan,
>>>
>>> To the best of my knowledge there is no version yet of AJDT that will
>>> work in RC2. According to the AJDT download page
>>> ( http://dev.eclipse.org/viewcvs/indextech.cgi/~checkout~/org. eclipse.ajdt/download.html)
>>>
>>> the most recent release of AJDT, 1.1.10, only works up to Eclipse 3.0
>>> M9. Unless you absolutely must work on the latest Eclipse RC then
>>> that is what I would recommend.
>>>
>>> AJDT 1.1.11, which will work on Eclipse RC3, is due out any day now...
>>>
>>> Best regards,
>>> George
>>>
>>> Fintan wrote:
>>>
>>>> Hi All,
>>>>
>>>> I have downloaded the aspect12.jar and manually installed in Eclipse
>>>> 3.0
>>>> RC2.
>>>>
>>>> I am trying to follow the help that was installed, but I cannot add an
>>>> aspect. I have created the AspectJ project, but when I try File ->
>>>> New ->
>>>> Aspect, there is NO option for Aspect.
>>>>
>>>> What can I do?
>>>>
>>>> Many thanks for your help,
>>>>
>>>> Fintan
>>>>
>>>>
>>>>
|
|
|
Re: Cannot create an aspect in Eclipse [message #580912 is a reply to message #37618] |
Thu, 24 June 2004 12:20 |
George Harley Messages: 70 Registered: July 2009 |
Member |
|
|
Hi Fintan,
To the best of my knowledge there is no version yet of AJDT that will
work in RC2. According to the AJDT download page
( http://dev.eclipse.org/viewcvs/indextech.cgi/~checkout~/org. eclipse.ajdt/download.html)
the most recent release of AJDT, 1.1.10, only works up to Eclipse 3.0
M9. Unless you absolutely must work on the latest Eclipse RC then that
is what I would recommend.
AJDT 1.1.11, which will work on Eclipse RC3, is due out any day now...
Best regards,
George
Fintan wrote:
> Hi All,
>
> I have downloaded the aspect12.jar and manually installed in Eclipse 3.0
> RC2.
>
> I am trying to follow the help that was installed, but I cannot add an
> aspect. I have created the AspectJ project, but when I try File -> New ->
> Aspect, there is NO option for Aspect.
>
> What can I do?
>
> Many thanks for your help,
>
> Fintan
>
>
>
|
|
|
Re: Cannot create an aspect in Eclipse [message #580927 is a reply to message #37645] |
Thu, 24 June 2004 13:47 |
George Harley Messages: 70 Registered: July 2009 |
Member |
|
|
Hi again,
Update on my previous note. I've double checked and apparently AJDT
1.1.10 *should* work alright on Eclipse 3.0. That'll teach me to post in
haste.
So, returning back to your original post Fintan, can you confirm that it
was AJDT 1.1.10 that you were using. You refer to "aspect12.jar" and I
am not terribly sure what that means...
Best regards,
George
George Harley wrote:
> Hi Fintan,
>
> To the best of my knowledge there is no version yet of AJDT that will
> work in RC2. According to the AJDT download page
> ( http://dev.eclipse.org/viewcvs/indextech.cgi/~checkout~/org. eclipse.ajdt/download.html)
>
> the most recent release of AJDT, 1.1.10, only works up to Eclipse 3.0
> M9. Unless you absolutely must work on the latest Eclipse RC then that
> is what I would recommend.
>
> AJDT 1.1.11, which will work on Eclipse RC3, is due out any day now...
>
> Best regards,
> George
>
> Fintan wrote:
>
>> Hi All,
>>
>> I have downloaded the aspect12.jar and manually installed in Eclipse 3.0
>> RC2.
>>
>> I am trying to follow the help that was installed, but I cannot add an
>> aspect. I have created the AspectJ project, but when I try File ->
>> New ->
>> Aspect, there is NO option for Aspect.
>>
>> What can I do?
>>
>> Many thanks for your help,
>>
>> Fintan
>>
>>
>>
|
|
|
Re: Cannot create an aspect in Eclipse [message #581004 is a reply to message #37683] |
Wed, 30 June 2004 00:21 |
Alessandro Fragnani Messages: 16 Registered: July 2009 |
Junior Member |
|
|
Hi George and Fintan,
I´m having a problem with AJDT and Eclipse v3 RC 3 also. I have
downloaded usint the "Help / Software Update" option.
It appears to be installed fine. It appears on the "About Box", and the
"AspectJ Project" is on the "File / New / Project", but when I select it
and click next, I receive a error:
"The selected wizard could not be started. Reason: Plug-in
org.eclipse.ajdt.ui was unable to load class
org.eclipse.ajdt.internal.ui.wizards.AspectJProjectWizard"
On my plugins folder I have "org.eclipse.ajdt.ui_0.6.4" and
"org.eclipse.aspectj_1.1.4".
Any ideas?
Thanks in advance
Alessandro
George Harley wrote:
> Hi again,
>
> Update on my previous note. I've double checked and apparently AJDT
> 1.1.10 *should* work alright on Eclipse 3.0. That'll teach me to post in
> haste.
>
> So, returning back to your original post Fintan, can you confirm that it
> was AJDT 1.1.10 that you were using. You refer to "aspect12.jar" and I
> am not terribly sure what that means...
>
> Best regards,
> George
>
> George Harley wrote:
>
>> Hi Fintan,
>>
>> To the best of my knowledge there is no version yet of AJDT that will
>> work in RC2. According to the AJDT download page
>> ( http://dev.eclipse.org/viewcvs/indextech.cgi/~checkout~/org. eclipse.ajdt/download.html)
>>
>> the most recent release of AJDT, 1.1.10, only works up to Eclipse 3.0
>> M9. Unless you absolutely must work on the latest Eclipse RC then that
>> is what I would recommend.
>>
>> AJDT 1.1.11, which will work on Eclipse RC3, is due out any day now...
>>
>> Best regards,
>> George
>>
>> Fintan wrote:
>>
>>> Hi All,
>>>
>>> I have downloaded the aspect12.jar and manually installed in Eclipse 3.0
>>> RC2.
>>>
>>> I am trying to follow the help that was installed, but I cannot add an
>>> aspect. I have created the AspectJ project, but when I try File ->
>>> New ->
>>> Aspect, there is NO option for Aspect.
>>>
>>> What can I do?
>>>
>>> Many thanks for your help,
>>>
>>> Fintan
>>>
>>>
>>>
|
|
|
Re: Cannot create an aspect in Eclipse [message #581026 is a reply to message #37771] |
Wed, 30 June 2004 10:14 |
George Harley Messages: 70 Registered: July 2009 |
Member |
|
|
Hi Alessandro,
It sounds to me like you *might* have the wrong version of AJDT
installed in your Eclipse 3.0. If you have installed AJDT 1.1.10 then in
your plugins folder you should be seeing "org.eclipse.ajdt.ui_0.6.10"
and "org.eclipse.aspectj_1.1.10" rather than the entries you list in
your note. Please can you confirm the update site URL that you used when
installing. For AJDT 1.1.10 it should be
http://download.eclipse.org/technology/ajdt/30M8/update
The list of all AJDT update site URLs is given in the project download
page here
http://dev.eclipse.org/viewcvs/indextech.cgi/~checkout~/org. eclipse.ajdt/download.html
Best regards,
George
Alessandro Fragnani wrote:
> Hi George and Fintan,
>
> I´m having a problem with AJDT and Eclipse v3 RC 3 also. I have
> downloaded usint the "Help / Software Update" option.
>
> It appears to be installed fine. It appears on the "About Box", and the
> "AspectJ Project" is on the "File / New / Project", but when I select it
> and click next, I receive a error:
>
> "The selected wizard could not be started. Reason: Plug-in
> org.eclipse.ajdt.ui was unable to load class
> org.eclipse.ajdt.internal.ui.wizards.AspectJProjectWizard"
>
> On my plugins folder I have "org.eclipse.ajdt.ui_0.6.4" and
> "org.eclipse.aspectj_1.1.4".
>
> Any ideas?
>
> Thanks in advance
>
> Alessandro
>
> George Harley wrote:
>
>> Hi again,
>>
>> Update on my previous note. I've double checked and apparently AJDT
>> 1.1.10 *should* work alright on Eclipse 3.0. That'll teach me to post
>> in haste.
>>
>> So, returning back to your original post Fintan, can you confirm that
>> it was AJDT 1.1.10 that you were using. You refer to "aspect12.jar"
>> and I am not terribly sure what that means...
>>
>> Best regards,
>> George
>>
>> George Harley wrote:
>>
>>> Hi Fintan,
>>>
>>> To the best of my knowledge there is no version yet of AJDT that will
>>> work in RC2. According to the AJDT download page
>>> ( http://dev.eclipse.org/viewcvs/indextech.cgi/~checkout~/org. eclipse.ajdt/download.html)
>>>
>>> the most recent release of AJDT, 1.1.10, only works up to Eclipse 3.0
>>> M9. Unless you absolutely must work on the latest Eclipse RC then
>>> that is what I would recommend.
>>>
>>> AJDT 1.1.11, which will work on Eclipse RC3, is due out any day now...
>>>
>>> Best regards,
>>> George
>>>
>>> Fintan wrote:
>>>
>>>> Hi All,
>>>>
>>>> I have downloaded the aspect12.jar and manually installed in Eclipse
>>>> 3.0
>>>> RC2.
>>>>
>>>> I am trying to follow the help that was installed, but I cannot add an
>>>> aspect. I have created the AspectJ project, but when I try File ->
>>>> New ->
>>>> Aspect, there is NO option for Aspect.
>>>>
>>>> What can I do?
>>>>
>>>> Many thanks for your help,
>>>>
>>>> Fintan
>>>>
>>>>
>>>>
|
|
|
Goto Forum:
Current Time: Fri Mar 29 09:08:44 GMT 2024
Powered by FUDForum. Page generated in 0.03423 seconds
|