Skip to main content


Eclipse Community Forums
Forum Search:

Search      Help    Register    Login    Home
Home » Polarsys » Capella General » Addon/Viewpoint to support STAMP or STPA for safety and security analysis(Capella modeling capability)
Addon/Viewpoint to support STAMP or STPA for safety and security analysis [message #1830285] Wed, 22 July 2020 15:43 Go to next message
Scott Millsap is currently offline Scott MillsapFriend
Messages: 5
Registered: January 2020
Junior Member
Does anyone know if there is any tool development for Capella to help support STPA based hazard analysis? I've been participating in the MIT STAMP Workshop this week. It appears the top down analysis method is well aligned to ARCADIA Method, but the professors have indicated there isn't too much MBSE tool support for the STPA analysis method as of yet.

Any thoughts about this from the Capella experts?

Thanks,
Scott
Re: Addon/Viewpoint to support STAMP or STPA for safety and security analysis [message #1830287 is a reply to message #1830285] Wed, 22 July 2020 16:40 Go to previous messageGo to next message
Stephane LACRAMPE is currently offline Stephane LACRAMPEFriend
Messages: 206
Registered: July 2009
Senior Member
Hi Scott,
I hope you are doing well.
This is certainly not a comprehensive answer but I found these 2 papers which I believe are relevant to your question:
- "STPA-Inspired Safety Analysis of Driver-Vehicle Interaction in Cooperative Driving Automation": https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwip9YzkpeHqAhUO0uAKHWtoDfwQFjABegQIBRAB&url=http%3A%2F%2Fwww.diva-portal.se%2Fsmash%2Fget%2Fdiva2%3A1371216%2FFULLTEXT01.pdf&usg=AOvVaw0WTPY74kxrVgkyI39kewFE
- "MethodologyAndArchitectureForSafetyManagement": https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwip9YzkpeHqAhUO0uAKHWtoDfwQFjACegQIBhAB&url=https%3A%2F%2Fhal-univ-pau.archives-ouvertes.fr%2Fhal-02416468%2Ffile%2Fcsit91801.pdf&usg=AOvVaw3ZEg0mBr1nVCe099Q11k0K

Stephane


Stephane LACRAMPE
Obeo Canada
Re: Addon/Viewpoint to support STAMP or STPA for safety and security analysis [message #1830821 is a reply to message #1830287] Tue, 04 August 2020 19:21 Go to previous messageGo to next message
Olivier Constant is currently offline Olivier ConstantFriend
Messages: 105
Registered: January 2012
Senior Member
Hello Scott,

Yes, there is work going on regarding STPA with Arcadia and Capella. As you pointed out, it feels like a good fit. It is not ready yet, but you can expect that we post on this thread when we have relevant news.

Olivier
Re: Addon/Viewpoint to support STAMP or STPA for safety and security analysis [message #1830847 is a reply to message #1830821] Wed, 05 August 2020 08:15 Go to previous messageGo to next message
Ricardo Reis is currently offline Ricardo ReisFriend
Messages: 6
Registered: March 2020
Junior Member
Nice to know Oliver. I am interested also.

best, ricardo
Re: Addon/Viewpoint to support STAMP or STPA for safety and security analysis [message #1831727 is a reply to message #1830821] Thu, 27 August 2020 14:26 Go to previous messageGo to next message
Scott Millsap is currently offline Scott MillsapFriend
Messages: 5
Registered: January 2020
Junior Member
Olivier Constant wrote on Tue, 04 August 2020 19:21
Hello Scott,

Yes, there is work going on regarding STPA with Arcadia and Capella. As you pointed out, it feels like a good fit. It is not ready yet, but you can expect that we post on this thread when we have relevant news.

Olivier


This is good to hear. This past week I have been doing a literature review on STPA. Stephane provided some interesting papers above.

What I'm trying to understand is if some existing features of Capella could be leveraged. For example, does a functional chain on a LAB diagram help to visually illustrate Unsafe Control Actions? Is there a chance to use Capella sequence diagrams in support of illustrating Step 4 Loss Scenarios? Would it be valid to use functional exchanges to represent causal factors between model elements such as missing or delayed data?

I'm pretty new to STPA but I hope to develop some architecture views that are of value my safety engineering team mates.

Re: Addon/Viewpoint to support STAMP or STPA for safety and security analysis [message #1831769 is a reply to message #1830287] Fri, 28 August 2020 13:21 Go to previous messageGo to next message
Scott Millsap is currently offline Scott MillsapFriend
Messages: 5
Registered: January 2020
Junior Member
Stephane LACRAMPE wrote on Wed, 22 July 2020 16:40
Hi Scott,
I hope you are doing well.
This is certainly not a comprehensive answer but I found these 2 papers which I believe are relevant to your question:
- "STPA-Inspired Safety Analysis of Driver-Vehicle Interaction in Cooperative Driving Automation": https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwip9YzkpeHqAhUO0uAKHWtoDfwQFjABegQIBRAB&url=http%3A%2F%2Fwww.diva-portal.se%2Fsmash%2Fget%2Fdiva2%3A1371216%2FFULLTEXT01.pdf&usg=AOvVaw0WTPY74kxrVgkyI39kewFE
- "MethodologyAndArchitectureForSafetyManagement": https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwip9YzkpeHqAhUO0uAKHWtoDfwQFjACegQIBhAB&url=https%3A%2F%2Fhal-univ-pau.archives-ouvertes.fr%2Fhal-02416468%2Ffile%2Fcsit91801.pdf&usg=AOvVaw3ZEg0mBr1nVCe099Q11k0K


Stephane


The 2nd paper was of strong interest as the authors explained that they would propose to associate STPA with each phase of ARCADIA method. The details were really difficult to follow so I didn't think I learned anything about applying STPA within an architecture phase. Disappointed, as I was hoping to get working insight about alignment of STPA Steps (0-4) to architecture captures in Capella.
Re: Addon/Viewpoint to support STAMP or STPA for safety and security analysis [message #1831850 is a reply to message #1831769] Tue, 01 September 2020 01:47 Go to previous message
Fábio Guarita is currently offline Fábio GuaritaFriend
Messages: 64
Registered: December 2019
Member
Considering STPA is usually applied at system level, most adequate perspective should be SA to start. Having a well defined operational concept (OA perspective) may also help a lot.
Previous Topic:Example on how to install Requirements Viewpoint, and how to import requirements from an Excel
Next Topic:Change Event Referencing Elements
Goto Forum:
  


Current Time: Thu Dec 03 20:14:53 GMT 2020

Powered by FUDForum. Page generated in 0.02711 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.2.
Copyright ©2001-2010 FUDforum Bulletin Board Software

Back to the top