Skip to main content


Eclipse Community Forums
Forum Search:

Search      Help    Register    Login    Home
Home » Eclipse Projects » Kura » OPCUA Driver for kura 3.0.0(OPCUA Driver for kura 3.0.0)
OPCUA Driver for kura 3.0.0 [message #1763730] Fri, 19 May 2017 07:22 Go to next message
Blanca Kremer is currently offline Blanca KremerFriend
Messages: 5
Registered: March 2017
Junior Member
HI,

I am trying kura wires. I have installed the opcua driver from eclipse marketplace. My opcua server nodeIds are in "numeric type" , is this a problem when configuring an asset ? I mean OPcUaMessages.nodeId should be a string ???
Any problem connecting with my opcua server but error reading the nodeId...

17:03:20,283 [DefaultQuartzScheduler_Worker-2] ERROR WireAsset:326 - OpcUaMessages.errorRetrievingNodeId

Any suggestion ??

Report message to a moderator

Re: OPCUA Driver for kura 3.0.0 [message #1763783 is a reply to message #1763730] Fri, 19 May 2017 15:37 Go to previous messageGo to next message
Matteo Maiero is currently offline Matteo MaieroFriend
Messages: 423
Registered: July 2015
Location: Italy
Senior Member
Hi Blanca,
could you please detail your setup?
In any case, current implementation only supports String-based node ids, so the failure with a numeric nodeId can be related to this.

Best regards,
Matteo

Report message to a moderator

Re: OPCUA Driver for kura 3.0.0 [message #1771964 is a reply to message #1763783] Fri, 01 September 2017 15:33 Go to previous messageGo to next message
Benjamin Rousseaux is currently offline Benjamin RousseauxFriend
Messages: 1
Registered: September 2017
Junior Member
Hi,

I have same problem but I use string for id on my opcua server, I also try with kura opcua simulator as describe on kura wire documentation but the error is still here.

Best regards,
Benjamin

Report message to a moderator

Re: OPCUA Driver for kura 3.0.0 [message #1772109 is a reply to message #1771964] Tue, 05 September 2017 15:54 Go to previous message
Nicola Timeus is currently offline Nicola TimeusFriend
Messages: 17
Registered: May 2017
Junior Member
Hi Blanca and Benjamin,

You can try the Developer Preview of the next version of the OPC-UA Driver available on Eclipse Marketplace (https://marketplace.eclipse.org/content/opc-ua-driver-kura-developer-preview).
The new version adds support for more Node IDs, including numeric ones, and should hopefully also fix the reported issue.
Please keep in mind that a direct upgrade is not supported on Kura 3.0.0, before installing the new version make sure to delete any existing wire graph and remove the old deployment package.

Best regards,
Nicola

Report message to a moderator

Previous Topic:Kura PWM?
Next Topic:I2C read command hangs
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Fri Apr 19 23:13:23 GMT 2024

Powered by FUDForum. Page generated in 0.03147 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.2.
Copyright ©2001-2010 FUDforum Bulletin Board Software

Back to the top

Sign up to our Newsletter

A fresh new issue delivered monthly