|
Re: Eclipse Debug Settings : GDB [message #1729621 is a reply to message #1729498] |
Sat, 16 April 2016 07:57 |
Ed Merks Messages: 33140 Registered: July 2009 |
Senior Member |
|
|
It's best to ask about C/C++ on the CDT forum.
On 15.04.2016 14:30, Praveen Selvaraj wrote:
> :? Hello,
> I followed all instrucions provided in help. But cant able to debug..
>
> My Program running Micium's uC-OSII on the Keil MCB2100 board (using the LPC2129 microcontroller).
> Debuger: Jlink Seggar . S/N 268002449 Version : 8.0
>
>
> I can able to build my program but while debugging I am struck with " Target connected .. Waiting for GDB connection .. "
>
> I would like to know were to check wether GDB started or not and respective settings for this issue. (how to proceed with?) please find attachment to setting that I have done.
>
> From Segger:
> Sounds like GDBServer is started correctly and connects to the target
> but GDB is not started or does not connect to GDBServer.
> Not a J-Link issue but a setup issue in Eclipse.
> We recommend to get in touch with the appropriate Eclipse community.
>
>
>
> error:
>
> SEGGER J-Link GDB Server V5.00c GUI Version
>
> JLinkARM.dll V5.00c (DLL compiled Jun 11 2015 11:40:27)
>
> -----GDB Server start settings-----
> GDBInit file: none
> GDB Server Listening port: 2331
> SWO raw output listening port: 2332
> Terminal I/O port: 2333
> Accept remote connection: localhost only
> Generate logfile: off
> Verify download: on
> Init regs on start: off
> Silent mode: off
> Single run mode: off
> Target connection timeout: 5000 ms
> ------J-Link related settings------
> J-Link Host interface: USB
> J-Link script: none
> J-Link settings file: none
> ------Target related settings------
> Target device: LPC2129
> Target interface: JTAG
> Target interface speed: 0kHz
> Target endian: little
>
> Connecting to J-Link...
> J-Link is connected.
> Firmware: J-Link ARM V8 compiled Nov 28 2014 13:44:46
> Hardware: V8.00
> S/N: 268002449
> OEM: SEGGER-EDU
> Feature(s): FlashBP, GDB
> Checking target voltage...
> Target voltage: 3.30 V
> Listening on TCP/IP port 2331
> Connecting to target...
> J-Link found 1 JTAG device, Total IRLen = 4
> JTAG ID: 0x4F1F0F0F (ARM7)
> Connected to target
> Waiting for GDB connection...
Ed Merks
Professional Support: https://www.macromodeling.com/
|
|
|
Powered by
FUDForum. Page generated in 0.03183 seconds