Eclipse Community Forums: Sirius » Sirius viewpoint unavailable after eclipse restart

Home » Eclipse Projects » Sirius » Sirius viewpoint unavailable after eclipse restart(Requires removing and adding modeling nature to the project to fix it)

Show: Today's Messages :: Show Polls :: Message Navigator

Sirius viewpoint unavailable after eclipse restart [message #1702667]

Thu, 23 July 2015 23:58

Robert Scott

Messages: 15
Registered: June 2015

Junior Member

I have a similar problem to message #398154
Anytime I restart eclipse I can no longer enable the viewpoint for the project. If I remove and then add the modeling project nature then the viewpoint is available again. This is a problem for my users.

detail:
From eclipse run-time workspace I created an emf genmodel from based on an XSD then generate-all and and export as deployable plugins and fragments. I deployed these to eclipse plugin directory. I also created a Sirius diagram description.

Next I create a modeling project and a model using the new example wizard for my model. I can enable the my Sirius viewpoint for the project until I close the project and re-open it or until I restart eclipse.

When I restart eclipse the model explorer will show the model as expandable
but when I try to expand it, another window shows "...loading models: loading referenced models of representations.aird" after which the model is no longer displayed as expandable in the explorer. Also the viewpoint is not listed to enable for the project.

To fix the problem I can simply use project->configure to remove and then add the modeling project nature to the project. Then everything works as it should.
This is a serious inconvenience to my users to do everythime they restart Eclipse.

Any help would be greatly apreciated. I've been looking into this for some time with no luck.

Thanks

Report message to a moderator

Re: Sirius viewpoint unavailable after eclipse restart [message #1702706 is a reply to message #1702667]

Fri, 24 July 2015 08:31

Maxime Porhel

Messages: 516
Registered: July 2009
Location: Nantes, France

Senior Member

Hi Robert,

Le 24/07/2015 01:58, Robert Scott a écrit :
> I have a similar problem to message #398154
> Anytime I restart eclipse I can no longer enable the viewpoint for the
> project. If I remove and then add the modeling project nature then the
> viewpoint is available again. This is a problem for my users.
> detail:
> From eclipse run-time workspace I created an emf genmodel from based on
> an XSD then generate-all and and export as deployable plugins and
> fragments. I deployed these to eclipse plugin directory. I also
> created a Sirius diagram description.
>
> Next I create a modeling project and a model using the new example
> wizard for my model. I can enable the my Sirius viewpoint for the
> project until I close the project and re-open it or until I restart
> eclipse.
> When I restart eclipse the model explorer will show the model as
> expandable but when I try to expand it, another window shows "...loading
> models: loading referenced models of representations.aird" after which
> the model is no longer displayed as expandable in the explorer. Also
> the viewpoint is not listed to enable for the project.
> To fix the problem I can simply use project->configure to remove and
> then add the modeling project nature to the project. Then everything
> works as it should.
> This is a serious inconvenience to my users to do everythime they
> restart Eclipse.

Which version of Sirius do you use ?

Bug 432133 [1] has been corrected for Sirius 3.0.0 (released with Mars).

The reproduction scenario described in the issue is very close to yours.

>
> Any help would be greatly apreciated. I've been looking into this for
> some time with no luck.
>
> Thanks

Regards

--
Maxime - Obeo

Need professional services for Sirius?
http://www.obeodesigner.com/sirius
--
[1] https://bugs.eclipse.org/bugs/show_bug.cgi?id=432133

Maxime Porhel - Obeo

Need training or professional services for Sirius?
http://www.obeodesigner.com/sirius

Report message to a moderator

Re: Sirius viewpoint unavailable after eclipse restart [message #1702952 is a reply to message #1702667]

Mon, 27 July 2015 14:37

Lorenzo Bettini

Messages: 1812
Registered: July 2009
Location: Firenze, Italy

Senior Member

On 24/07/2015 01:58, Robert Scott wrote:
> I have a similar problem to message #398154
> Anytime I restart eclipse I can no longer enable the viewpoint for the
> project. If I remove and then add the modeling project nature then the
> viewpoint is available again. This is a problem for my users.
> detail:
> From eclipse run-time workspace I created an emf genmodel from based on
> an XSD then generate-all and and export as deployable plugins and
> fragments. I deployed these to eclipse plugin directory. I also
> created a Sirius diagram description.
>
> Next I create a modeling project and a model using the new example
> wizard for my model. I can enable the my Sirius viewpoint for the
> project until I close the project and re-open it or until I restart
> eclipse.
> When I restart eclipse the model explorer will show the model as
> expandable but when I try to expand it, another window shows "...loading
> models: loading referenced models of representations.aird" after which
> the model is no longer displayed as expandable in the explorer. Also
> the viewpoint is not listed to enable for the project.
> To fix the problem I can simply use project->configure to remove and
> then add the modeling project nature to the project. Then everything
> works as it should.
> This is a serious inconvenience to my users to do everythime they
> restart Eclipse.
>
> Any help would be greatly apreciated. I've been looking into this for
> some time with no luck.
>
> Thanks

Hi

this looks like similar to
https://www.eclipse.org/forums/index.php/t/1059921/ and in my case, even
with Sirius 3.0.0 I still now and then experience the same problem...

Lorenzo

--
Lorenzo Bettini, PhD in Computer Science, DI, Univ. Torino
HOME: http://www.lorenzobettini.it
Xtext Book:
http://www.packtpub.com/implementing-domain-specific-languages-with-xtext-and-xtend/book

HOME: http://www.lorenzobettini.it
TDD Book: https://leanpub.com/tdd-buildautomation-ci
Xtext Book: https://www.packtpub.com/application-development/implementing-domain-specific-languages-xtext-and-xtend-second-edition

Report message to a moderator

Re: Sirius viewpoint unavailable after eclipse restart [message #1702960 is a reply to message #1702952]

Mon, 27 July 2015 14:58

Maxime Porhel

Messages: 516
Registered: July 2009
Location: Nantes, France

Senior Member

Hi Lorenzo,

Le 27/07/2015 16:37, Lorenzo Bettini a écrit :
> On 24/07/2015 01:58, Robert Scott wrote:
>> I have a similar problem to message #398154
>> Anytime I restart eclipse I can no longer enable the viewpoint for the
>> project. If I remove and then add the modeling project nature then the
>> viewpoint is available again. This is a problem for my users.
>> detail:
>> From eclipse run-time workspace I created an emf genmodel from based on
>> an XSD then generate-all and and export as deployable plugins and
>> fragments. I deployed these to eclipse plugin directory. I also
>> created a Sirius diagram description.
>>
>> Next I create a modeling project and a model using the new example
>> wizard for my model. I can enable the my Sirius viewpoint for the
>> project until I close the project and re-open it or until I restart
>> eclipse.
>> When I restart eclipse the model explorer will show the model as
>> expandable but when I try to expand it, another window shows "...loading
>> models: loading referenced models of representations.aird" after which
>> the model is no longer displayed as expandable in the explorer. Also
>> the viewpoint is not listed to enable for the project.
>> To fix the problem I can simply use project->configure to remove and
>> then add the modeling project nature to the project. Then everything
>> works as it should.
>> This is a serious inconvenience to my users to do everythime they
>> restart Eclipse.
>>
>> Any help would be greatly apreciated. I've been looking into this for
>> some time with no luck.
>>
>> Thanks
>
> Hi
>
> this looks like similar to
> https://www.eclipse.org/forums/index.php/t/1059921/ and in my case, even
> with Sirius 3.0.0 I still now and then experience the same problem...
>
> Lorenzo
>

Robert's issue seems to come from the XSD based metamodel is supposed to
be corrected Bug 432133 [1].

For your forum message, you told us a few month ago that you would like
to do some experiments before filling a bug: did you find something ?

Regards

--
Maxime - Obeo

Need professional services for Sirius?
http://www.obeodesigner.com/sirius
--
[1] https://bugs.eclipse.org/bugs/show_bug.cgi?id=432133
[2] https://www.eclipse.org/forums/index.php/t/1059921/

Maxime Porhel - Obeo

Need training or professional services for Sirius?
http://www.obeodesigner.com/sirius

Report message to a moderator

Re: Sirius viewpoint unavailable after eclipse restart [message #1703004 is a reply to message #1702706]

Mon, 27 July 2015 20:52

Robert Scott

Messages: 15
Registered: June 2015

Junior Member

Thanks for the reply. I was using Sirius 2.02. The problem is resolved with Sirius 3.0 although I still have a problem with the diagram that was created cannot be opened after eclipse restart of project close/re-open. I will look into possible issues with my plugin build and deployment I am using Sirius 3.0 on Luna SR-2. Thanks again.

Report message to a moderator

Re: Sirius viewpoint unavailable after eclipse restart [message #1703273 is a reply to message #1702960]

Thu, 30 July 2015 08:10

Lorenzo Bettini

Messages: 1812
Registered: July 2009
Location: Firenze, Italy

Senior Member

On 27/07/2015 16:58, Maxime Porhel wrote:
>
> Robert's issue seems to come from the XSD based metamodel is supposed to
> be corrected Bug 432133 [1].
>
> For your forum message, you told us a few month ago that you would like
> to do some experiments before filling a bug: did you find something ?
>

Hi

I still haven't had time to experiment further, and the project is not
public yet (I hope I'll make it public really soon).

I wonder if this seldom problem maybe due to my genmodel: when I open it
in the genmodel editor I have several problems of the shape "the
opposite must be a feature of the reference's type" (I imported the
ecore from UML); I can still generate Java code though. Does Sirius
uses the genmodel somehow?

cheers
Lorenzo

--
Lorenzo Bettini, PhD in Computer Science, DI, Univ. Torino
HOME: http://www.lorenzobettini.it
Xtext Book:
http://www.packtpub.com/implementing-domain-specific-languages-with-xtext-and-xtend/book

Report message to a moderator

Previous Topic:	cannot reopen diagram representation after eclipse restart
Next Topic:	HELP Event-driven Process Chain

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Fri Apr 19 12:45:48 GMT 2024

.:: Contact :: Home ::.

Breadcrumbs

Sign up to our Newsletter